From: Sam Ravnborg <sam@ravnborg.org>
To: Tobias Schramm <t.schramm@manjaro.org>
Cc: David Airlie <airlied@linux.ie>,
Thierry Reding <thierry.reding@gmail.com>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [RESEND 1/1] drm/panel: Add support for BOE NV140FHM-N49 panel to panel-simple
Date: Thu, 9 Jan 2020 17:00:25 +0100 [thread overview]
Message-ID: <20200109160025.GA17071@ravnborg.org> (raw)
In-Reply-To: <20200109112952.2620-2-t.schramm@manjaro.org>
Hi Tobias.
On Thu, Jan 09, 2020 at 12:29:52PM +0100, Tobias Schramm wrote:
> This patch adds support for the BOE NV140FHM-N49 panel to the panel-simple
> driver. The panel is used by the pine64 Pinebook Pro.
>
> Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Applied to drm-misc-next togher with the bindings patch.
Thanks for the quick r-b.
Sam
> ---
> drivers/gpu/drm/panel/panel-simple.c | 35 ++++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 5d487686d25c..6320df9765f3 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1036,6 +1036,38 @@ static const struct panel_desc boe_nv101wxmn51 = {
> },
> };
>
> +static const struct drm_display_mode boe_nv140fhmn49_modes[] = {
> + {
> + .clock = 148500,
> + .hdisplay = 1920,
> + .hsync_start = 1920 + 48,
> + .hsync_end = 1920 + 48 + 32,
> + .htotal = 2200,
> + .vdisplay = 1080,
> + .vsync_start = 1080 + 3,
> + .vsync_end = 1080 + 3 + 5,
> + .vtotal = 1125,
> + .vrefresh = 60,
> + },
> +};
> +
> +static const struct panel_desc boe_nv140fhmn49 = {
> + .modes = boe_nv140fhmn49_modes,
> + .num_modes = ARRAY_SIZE(boe_nv140fhmn49_modes),
> + .bpc = 6,
> + .size = {
> + .width = 309,
> + .height = 174,
> + },
> + .delay = {
> + .prepare = 210,
> + .enable = 50,
> + .unprepare = 160,
> + },
> + .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
> + .connector_type = DRM_MODE_CONNECTOR_eDP,
> +};
> +
> static const struct drm_display_mode cdtech_s043wq26h_ct7_mode = {
> .clock = 9000,
> .hdisplay = 480,
> @@ -3161,6 +3193,9 @@ static const struct of_device_id platform_of_match[] = {
> }, {
> .compatible = "boe,nv101wxmn51",
> .data = &boe_nv101wxmn51,
> + }, {
> + .compatible = "boe,nv140fhmn49",
> + .data = &boe_nv140fhmn49,
> }, {
> .compatible = "cdtech,s043wq26h-ct7",
> .data = &cdtech_s043wq26h_ct7,
> --
> 2.24.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Sam Ravnborg <sam@ravnborg.org>
To: Tobias Schramm <t.schramm@manjaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [RESEND 1/1] drm/panel: Add support for BOE NV140FHM-N49 panel to panel-simple
Date: Thu, 9 Jan 2020 17:00:25 +0100 [thread overview]
Message-ID: <20200109160025.GA17071@ravnborg.org> (raw)
In-Reply-To: <20200109112952.2620-2-t.schramm@manjaro.org>
Hi Tobias.
On Thu, Jan 09, 2020 at 12:29:52PM +0100, Tobias Schramm wrote:
> This patch adds support for the BOE NV140FHM-N49 panel to the panel-simple
> driver. The panel is used by the pine64 Pinebook Pro.
>
> Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Applied to drm-misc-next togher with the bindings patch.
Thanks for the quick r-b.
Sam
> ---
> drivers/gpu/drm/panel/panel-simple.c | 35 ++++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 5d487686d25c..6320df9765f3 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1036,6 +1036,38 @@ static const struct panel_desc boe_nv101wxmn51 = {
> },
> };
>
> +static const struct drm_display_mode boe_nv140fhmn49_modes[] = {
> + {
> + .clock = 148500,
> + .hdisplay = 1920,
> + .hsync_start = 1920 + 48,
> + .hsync_end = 1920 + 48 + 32,
> + .htotal = 2200,
> + .vdisplay = 1080,
> + .vsync_start = 1080 + 3,
> + .vsync_end = 1080 + 3 + 5,
> + .vtotal = 1125,
> + .vrefresh = 60,
> + },
> +};
> +
> +static const struct panel_desc boe_nv140fhmn49 = {
> + .modes = boe_nv140fhmn49_modes,
> + .num_modes = ARRAY_SIZE(boe_nv140fhmn49_modes),
> + .bpc = 6,
> + .size = {
> + .width = 309,
> + .height = 174,
> + },
> + .delay = {
> + .prepare = 210,
> + .enable = 50,
> + .unprepare = 160,
> + },
> + .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
> + .connector_type = DRM_MODE_CONNECTOR_eDP,
> +};
> +
> static const struct drm_display_mode cdtech_s043wq26h_ct7_mode = {
> .clock = 9000,
> .hdisplay = 480,
> @@ -3161,6 +3193,9 @@ static const struct of_device_id platform_of_match[] = {
> }, {
> .compatible = "boe,nv101wxmn51",
> .data = &boe_nv101wxmn51,
> + }, {
> + .compatible = "boe,nv140fhmn49",
> + .data = &boe_nv140fhmn49,
> }, {
> .compatible = "cdtech,s043wq26h-ct7",
> .data = &cdtech_s043wq26h_ct7,
> --
> 2.24.1
next prev parent reply other threads:[~2020-01-09 16:00 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-09 11:29 [RESEND 0/1] Add support for BOE NV140FHM-N49 panel to panel-simple Tobias Schramm
2020-01-09 11:29 ` Tobias Schramm
2020-01-09 11:29 ` [RESEND 1/1] drm/panel: " Tobias Schramm
2020-01-09 11:29 ` Tobias Schramm
2020-01-09 16:00 ` Sam Ravnborg [this message]
2020-01-09 16:00 ` Sam Ravnborg
2020-01-09 14:07 ` [RESEND 0/1] " Sam Ravnborg
2020-01-09 14:07 ` Sam Ravnborg
2020-01-09 15:27 ` Tobias Schramm
2020-01-09 15:27 ` Tobias Schramm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200109160025.GA17071@ravnborg.org \
--to=sam@ravnborg.org \
--cc=airlied@linux.ie \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=t.schramm@manjaro.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.