* [GIT PULL] Qualcomm ARM64 defconfig updates for v5.6
@ 2020-01-13 20:41 ` Bjorn Andersson
0 siblings, 0 replies; 2+ messages in thread
From: Bjorn Andersson @ 2020-01-13 20:41 UTC (permalink / raw)
To: arm, soc
Cc: linux-arm-msm, linux-arm-kernel, Andy Gross, Arnd Bergmann,
Olof Johansson, Kevin Hilman, Bjorn Andersson, Jeffrey Hugo,
Niklas Cassel, Amit Kucheria, Jorge Ramirez-Ortiz, Lina Iyer
Olof, I attempted to make the two CPUFREQ drivers =m, but the result is
that CPUfreq doesn't come up on QCS404. We will need to investigate this
further and I will follow up with a patch once this is sorted out.
Regards,
Bjorn
The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a:
Linux 5.5-rc1 (2019-12-08 14:57:55 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm64-defconfig-for-5.6
for you to fetch changes up to a7ab9b89af22a8ce68db648759d974a214bc25bd:
arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM (2020-01-04 23:58:00 -0800)
----------------------------------------------------------------
Qualcomm ARM64 defconfig updates for v5.6
* Enable NVMEM and OSM CPUfreq drivers
* Enable CPR driver
* Enable HFPLL driver
* Enable ATH10k SNOC driver
* Enable PMIC thermal driver
* Enable wakeup controller driver
* Enable watchdog driver
* Enable PRNG driver
* Enable SN65DSI86 DSI to DisplayPort bridge driver
* Enable QCA Bluetooth driver
* Enable Qualcomm SoCinfo driver
* Enable SPI and QSPI drivers
* Enable drivers providing remoteproc dependencies
----------------------------------------------------------------
Amit Kucheria (1):
arm64: defconfig: Enable QCOM PMIC thermal
Bjorn Andersson (7):
arm64: defconfig: Enable Qualcomm remoteproc dependencies
arm64: defconfig: Enable Qualcomm SPI and QSPI controller
arm64: defconfig: Enable Qualcomm socinfo driver
arm64: defconfig: Enable Qualcomm CPUfreq HW driver
arm64: defconfig: Enable Qualcomm pseudo rng
arm64: defconfig: Enable Qualcomm watchdog driver
arm64: defconfig: Enable ATH10K_SNOC
Jeffrey Hugo (2):
arm64: defconfig: Enable QCA Bluetooth over UART
arm64: defconfig: Enable SN65DSI86 display bridge
Jorge Ramirez-Ortiz (1):
arm64: defconfig: Enable HFPLL
Lina Iyer (1):
arm64: defconfig: enable PDC interrupt controller for Qualcomm SDM845
Niklas Cassel (2):
arm64: defconfig: enable CONFIG_QCOM_CPR
arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM
arch/arm64/configs/defconfig | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
^ permalink raw reply [flat|nested] 2+ messages in thread
* [GIT PULL] Qualcomm ARM64 defconfig updates for v5.6
@ 2020-01-13 20:41 ` Bjorn Andersson
0 siblings, 0 replies; 2+ messages in thread
From: Bjorn Andersson @ 2020-01-13 20:41 UTC (permalink / raw)
To: arm, soc
Cc: Arnd Bergmann, Jeffrey Hugo, linux-arm-msm, Amit Kucheria,
Bjorn Andersson, Niklas Cassel, Andy Gross, Lina Iyer,
Kevin Hilman, Olof Johansson, Jorge Ramirez-Ortiz,
linux-arm-kernel
Olof, I attempted to make the two CPUFREQ drivers =m, but the result is
that CPUfreq doesn't come up on QCS404. We will need to investigate this
further and I will follow up with a patch once this is sorted out.
Regards,
Bjorn
The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a:
Linux 5.5-rc1 (2019-12-08 14:57:55 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm64-defconfig-for-5.6
for you to fetch changes up to a7ab9b89af22a8ce68db648759d974a214bc25bd:
arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM (2020-01-04 23:58:00 -0800)
----------------------------------------------------------------
Qualcomm ARM64 defconfig updates for v5.6
* Enable NVMEM and OSM CPUfreq drivers
* Enable CPR driver
* Enable HFPLL driver
* Enable ATH10k SNOC driver
* Enable PMIC thermal driver
* Enable wakeup controller driver
* Enable watchdog driver
* Enable PRNG driver
* Enable SN65DSI86 DSI to DisplayPort bridge driver
* Enable QCA Bluetooth driver
* Enable Qualcomm SoCinfo driver
* Enable SPI and QSPI drivers
* Enable drivers providing remoteproc dependencies
----------------------------------------------------------------
Amit Kucheria (1):
arm64: defconfig: Enable QCOM PMIC thermal
Bjorn Andersson (7):
arm64: defconfig: Enable Qualcomm remoteproc dependencies
arm64: defconfig: Enable Qualcomm SPI and QSPI controller
arm64: defconfig: Enable Qualcomm socinfo driver
arm64: defconfig: Enable Qualcomm CPUfreq HW driver
arm64: defconfig: Enable Qualcomm pseudo rng
arm64: defconfig: Enable Qualcomm watchdog driver
arm64: defconfig: Enable ATH10K_SNOC
Jeffrey Hugo (2):
arm64: defconfig: Enable QCA Bluetooth over UART
arm64: defconfig: Enable SN65DSI86 display bridge
Jorge Ramirez-Ortiz (1):
arm64: defconfig: Enable HFPLL
Lina Iyer (1):
arm64: defconfig: enable PDC interrupt controller for Qualcomm SDM845
Niklas Cassel (2):
arm64: defconfig: enable CONFIG_QCOM_CPR
arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM
arch/arm64/configs/defconfig | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-01-13 20:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-01-13 20:41 [GIT PULL] Qualcomm ARM64 defconfig updates for v5.6 Bjorn Andersson
2020-01-13 20:41 ` Bjorn Andersson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.