Re: [PATCH 4/4] mtd: spinand: Add new Micron SPI NAND devices with multiple dies

[Miquel Raynal <miquel.raynal@bootlin.com>]

Hi Shiva,

shiva.linuxworks@gmail.com wrote on Sun, 19 Jan 2020 15:54:32 +0100:

> From: Shivamurthy Shastri <sshivamurthy@micron.com>
> 
> Add device table for new Micron SPI NAND devices, which have multiple
> dies. While at it, add support to select the die.

Same comment as in 3/4.

> 
> Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
> ---
>  drivers/mtd/nand/spi/micron.c | 50 +++++++++++++++++++++++++++++++++++
>  1 file changed, 50 insertions(+)
> 
> diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
> index 45fc37c58f8a..03b486843210 100644
> --- a/drivers/mtd/nand/spi/micron.c
> +++ b/drivers/mtd/nand/spi/micron.c
> @@ -18,6 +18,8 @@
>  #define MICRON_STATUS_ECC_4TO6_BITFLIPS	(3 << 4)
>  #define MICRON_STATUS_ECC_7TO8_BITFLIPS	(5 << 4)
>  
> +#define MICRON_DIE_SELECTION_BIT	6
> +
>  static SPINAND_OP_VARIANTS(read_cache_variants,
>  		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
>  		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
> @@ -64,6 +66,21 @@ static const struct mtd_ooblayout_ops micron_8_ooblayout = {
>  	.free = micron_8_ooblayout_free,
>  };
>  
> +static int micron_select_target(struct spinand_device *spinand,
> +				unsigned int target)
> +{
> +	struct spi_mem_op op = SPINAND_SET_FEATURE_OP(0xd0,
> +						      spinand->scratchbuf);
> +
> +	/*
> +	 * As per datasheet, die selection is done by the 6th bit of Die
> +	 * Select Register (Address 0xD0).
> +	 */

I would put this comment close to the macro definition.

> +	*spinand->scratchbuf = target << MICRON_DIE_SELECTION_BIT;

Either target is or or 1 and you can use the BIT macro, or you suppose
it can go higher and the _BIT suffix does not fit. _SHIFT would work
and creating a macro directly would be even better.

> +
> +	return spi_mem_exec_op(spinand->spimem, &op);
> +}
> +

Where is this function used?

>  static int micron_8_ecc_get_status(struct spinand_device *spinand,
>  				   u8 status)
>  {
> @@ -131,6 +148,17 @@ static const struct spinand_info micron_spinand_table[] = {
>  		     0,
>  		     SPINAND_ECCINFO(&micron_8_ooblayout,
>  				     micron_8_ecc_get_status)),
> +	/* M79A 4Gb 3.3V */
> +	SPINAND_INFO("MT29F4G01ADAGD", 0x36,
> +		     NAND_MEMORG(1, 2048, 128, 64, 2048, 80, 2, 1, 2),
> +		     NAND_ECCREQ(8, 512),
> +		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> +					      &write_cache_variants,
> +					      &update_cache_variants),
> +		     0,
> +		     SPINAND_ECCINFO(&micron_8_ooblayout,
> +				     micron_8_ecc_get_status),
> +		     SPINAND_SELECT_TARGET(micron_select_target)),
>  	/* M70A 4Gb 3.3V */
>  	SPINAND_INFO("MT29F4G01ABAFD", 0x34,
>  		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
> @@ -151,6 +179,28 @@ static const struct spinand_info micron_spinand_table[] = {
>  		     0,
>  		     SPINAND_ECCINFO(&micron_8_ooblayout,
>  				     micron_8_ecc_get_status)),
> +	/* M70A 8Gb 3.3V */
> +	SPINAND_INFO("MT29F8G01ADAFD", 0x46,
> +		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 2),
> +		     NAND_ECCREQ(8, 512),
> +		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> +					      &write_cache_variants,
> +					      &update_cache_variants),
> +		     0,
> +		     SPINAND_ECCINFO(&micron_8_ooblayout,
> +				     micron_8_ecc_get_status),
> +		     SPINAND_SELECT_TARGET(micron_select_target)),
> +	/* M70A 8Gb 1.8V */
> +	SPINAND_INFO("MT29F8G01ADBFD", 0x47,
> +		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 2),
> +		     NAND_ECCREQ(8, 512),
> +		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
> +					      &write_cache_variants,
> +					      &update_cache_variants),
> +		     0,
> +		     SPINAND_ECCINFO(&micron_8_ooblayout,
> +				     micron_8_ecc_get_status),
> +		     SPINAND_SELECT_TARGET(micron_select_target)),
>  };
>  
>  static int micron_spinand_detect(struct spinand_device *spinand)




Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/