From: Igor Mammedov <imammedo@redhat.com>
To: Dongjiu Geng <gengdongjiu@huawei.com>
Cc: <pbonzini@redhat.com>, <mst@redhat.com>,
<shannon.zhaosl@gmail.com>, <peter.maydell@linaro.org>,
<fam@euphon.net>, <rth@twiddle.net>, <ehabkost@redhat.com>,
<mtosatti@redhat.com>, <xuwei5@huawei.com>,
<jonathan.cameron@huawei.com>, <james.morse@arm.com>,
<qemu-devel@nongnu.org>, <kvm@vger.kernel.org>,
<qemu-arm@nongnu.org>, <zhengxiang9@huawei.com>,
<linuxarm@huawei.com>
Subject: Re: [PATCH v22 4/9] ACPI: Build Hardware Error Source Table
Date: Thu, 23 Jan 2020 16:48:08 +0100 [thread overview]
Message-ID: <20200123164808.38af0491@redhat.com> (raw)
In-Reply-To: <1578483143-14905-5-git-send-email-gengdongjiu@huawei.com>
On Wed, 8 Jan 2020 19:32:18 +0800
Dongjiu Geng <gengdongjiu@huawei.com> wrote:
> This patch builds Hardware Error Source Table(HEST) via fw_cfg blobs.
> Now it only supports ARMv8 SEA, a type of Generic Hardware Error
> Source version 2(GHESv2) error source. Afterwards, we can extend
> the supported types if needed. For the CPER section, currently it
> is memory section because kernel mainly wants userspace to handle
> the memory errors.
>
> This patch follows the spec ACPI 6.2 to build the Hardware Error
> Source table. For more detailed information, please refer to
> document: docs/specs/acpi_hest_ghes.rst
>
> build_append_ghes_notify() will help to add Hardware Error Notification
> to ACPI tables without using packed C structures and avoid endianness
> issues as API doesn't need explicit conversion.
>
> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
> Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
> Acked-by: Xiang Zheng <zhengxiang9@huawei.com>
Overall it looks fine to me, see couple nits below
> ---
> hw/acpi/ghes.c | 118 ++++++++++++++++++++++++++++++++++++++++++++++-
> hw/arm/virt-acpi-build.c | 2 +
> include/hw/acpi/ghes.h | 40 ++++++++++++++++
> 3 files changed, 159 insertions(+), 1 deletion(-)
>
> diff --git a/hw/acpi/ghes.c b/hw/acpi/ghes.c
> index b7fdbbb..9d37798 100644
> --- a/hw/acpi/ghes.c
> +++ b/hw/acpi/ghes.c
> @@ -34,9 +34,42 @@
>
> /* The max size in bytes for one error block */
> #define ACPI_GHES_MAX_RAW_DATA_LENGTH 0x400
> -
> /* Now only support ARMv8 SEA notification type error source */
> #define ACPI_GHES_ERROR_SOURCE_COUNT 1
> +/* Generic Hardware Error Source version 2 */
> +#define ACPI_GHES_SOURCE_GENERIC_ERROR_V2 10
> +/* Address offset in Generic Address Structure(GAS) */
> +#define GAS_ADDR_OFFSET 4
> +
> +/*
> + * Hardware Error Notification
> + * ACPI 4.0: 17.3.2.7 Hardware Error Notification
> + * Composes dummy Hardware Error Notification descriptor of specified type
> + */
> +static void build_ghes_hw_error_notification(GArray *table, const uint8_t type)
> +{
> + /* Type */
> + build_append_int_noprefix(table, type, 1);
> + /*
> + * Length:
> + * Total length of the structure in bytes
> + */
> + build_append_int_noprefix(table, 28, 1);
> + /* Configuration Write Enable */
> + build_append_int_noprefix(table, 0, 2);
> + /* Poll Interval */
> + build_append_int_noprefix(table, 0, 4);
> + /* Vector */
> + build_append_int_noprefix(table, 0, 4);
> + /* Switch To Polling Threshold Value */
> + build_append_int_noprefix(table, 0, 4);
> + /* Switch To Polling Threshold Window */
> + build_append_int_noprefix(table, 0, 4);
> + /* Error Threshold Value */
> + build_append_int_noprefix(table, 0, 4);
> + /* Error Threshold Window */
> + build_append_int_noprefix(table, 0, 4);
> +}
>
> /*
> * Build table for the hardware error fw_cfg blob.
> @@ -92,3 +125,86 @@ void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
> bios_linker_loader_write_pointer(linker, ACPI_GHES_DATA_ADDR_FW_CFG_FILE,
> 0, sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, 0);
> }
> +
> +/* Build Generic Hardware Error Source version 2 (GHESv2) */
> +static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker)
> +{
> + uint64_t address_offset;
> + /*
> + * Type:
> + * Generic Hardware Error Source version 2(GHESv2 - Type 10)
> + */
> + build_append_int_noprefix(table_data, ACPI_GHES_SOURCE_GENERIC_ERROR_V2, 2);
> + /* Source Id */
> + build_append_int_noprefix(table_data, source_id, 2);
> + /* Related Source Id */
> + build_append_int_noprefix(table_data, 0xffff, 2);
> + /* Flags */
> + build_append_int_noprefix(table_data, 0, 1);
> + /* Enabled */
> + build_append_int_noprefix(table_data, 1, 1);
> +
> + /* Number of Records To Pre-allocate */
> + build_append_int_noprefix(table_data, 1, 4);
> + /* Max Sections Per Record */
> + build_append_int_noprefix(table_data, 1, 4);
> + /* Max Raw Data Length */
> + build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4);
> +
> + address_offset = table_data->len;
> + /* Error Status Address */
> + build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0,
> + 4 /* QWord access */, 0);
> + bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
> + address_offset + GAS_ADDR_OFFSET,
> + sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, 0);
> +
> + /*
> + * Notification Structure
> + * Now only enable ARMv8 SEA notification type
> + */
> + build_ghes_hw_error_notification(table_data, ACPI_GHES_NOTIFY_SEA);
> +
> + /* Error Status Block Length */
> + build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4);
> +
> + /*
> + * Read Ack Register
> + * ACPI 6.1: 18.3.2.8 Generic Hardware Error Source
> + * version 2 (GHESv2 - Type 10)
> + */
> + address_offset = table_data->len;
> + build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0,
> + 4 /* QWord access */, 0);
> + bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
> + address_offset + GAS_ADDR_OFFSET,
> + sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE,
> + ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t));
> +
> + /*
> + * Read Ack Preserve
> + * We only provide the first bit in Read Ack Register to OSPM to write
> + * while the other bits are preserved.
> + */
> + build_append_int_noprefix(table_data, ~0x1ULL, 8);
> + /* Read Ack Write */
> + build_append_int_noprefix(table_data, 0x1, 8);
> +}
> +
> +/* Build Hardware Error Source Table */
> +void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
^^^^^^^^ it seems to be unused, so why it's here?
> + BIOSLinker *linker)
> +{
> + uint64_t hest_start = table_data->len;
> +
> + /* Hardware Error Source Table header*/
> + acpi_data_push(table_data, sizeof(AcpiTableHeader));
> +
> + /* Error Source Count */
> + build_append_int_noprefix(table_data, ACPI_GHES_ERROR_SOURCE_COUNT, 4);
> +
> + build_ghes_v2(table_data, ACPI_HEST_SRC_ID_SEA, linker);
> +
> + build_header(linker, table_data, (void *)(table_data->data + hest_start),
> + "HEST", table_data->len - hest_start, 1, NULL, "");
> +}
> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> index 6819fcf..837bbf9 100644
> --- a/hw/arm/virt-acpi-build.c
> +++ b/hw/arm/virt-acpi-build.c
> @@ -834,6 +834,8 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
> if (vms->ras) {
> acpi_add_table(table_offsets, tables_blob);
> build_ghes_error_table(tables->hardware_errors, tables->linker);
> + acpi_build_hest(tables_blob, tables->hardware_errors,
> + tables->linker);
not aligned properly
you can use ./scripts/checkpatch.pl to see if there is style errors
> }
>
> if (ms->numa_state->num_nodes > 0) {
> diff --git a/include/hw/acpi/ghes.h b/include/hw/acpi/ghes.h
> index 3dbda3f..09a7f86 100644
> --- a/include/hw/acpi/ghes.h
> +++ b/include/hw/acpi/ghes.h
> @@ -22,5 +22,45 @@
> #ifndef ACPI_GHES_H
> #define ACPI_GHES_H
>
> +/*
> + * Values for Hardware Error Notification Type field
> + */
> +enum AcpiGhesNotifyType {
> + /* Polled */
> + ACPI_GHES_NOTIFY_POLLED = 0,
> + /* External Interrupt */
> + ACPI_GHES_NOTIFY_EXTERNAL = 1,
> + /* Local Interrupt */
> + ACPI_GHES_NOTIFY_LOCAL = 2,
> + /* SCI */
> + ACPI_GHES_NOTIFY_SCI = 3,
> + /* NMI */
> + ACPI_GHES_NOTIFY_NMI = 4,
> + /* CMCI, ACPI 5.0: 18.3.2.7, Table 18-290 */
> + ACPI_GHES_NOTIFY_CMCI = 5,
> + /* MCE, ACPI 5.0: 18.3.2.7, Table 18-290 */
> + ACPI_GHES_NOTIFY_MCE = 6,
> + /* GPIO-Signal, ACPI 6.0: 18.3.2.7, Table 18-332 */
> + ACPI_GHES_NOTIFY_GPIO = 7,
> + /* ARMv8 SEA, ACPI 6.1: 18.3.2.9, Table 18-345 */
> + ACPI_GHES_NOTIFY_SEA = 8,
> + /* ARMv8 SEI, ACPI 6.1: 18.3.2.9, Table 18-345 */
> + ACPI_GHES_NOTIFY_SEI = 9,
> + /* External Interrupt - GSIV, ACPI 6.1: 18.3.2.9, Table 18-345 */
> + ACPI_GHES_NOTIFY_GSIV = 10,
> + /* Software Delegated Exception, ACPI 6.2: 18.3.2.9, Table 18-383 */
> + ACPI_GHES_NOTIFY_SDEI = 11,
> + /* 12 and greater are reserved */
> + ACPI_GHES_NOTIFY_RESERVED = 12
> +};
> +
> +enum {
> + ACPI_HEST_SRC_ID_SEA = 0,
> + /* future ids go here */
> + ACPI_HEST_SRC_ID_RESERVED,
> +};
> +
> void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker);
> +void acpi_build_hest(GArray *table_data, GArray *hardware_error,
> + BIOSLinker *linker);
> #endif
WARNING: multiple messages have this Message-ID (diff)
From: Igor Mammedov <imammedo@redhat.com>
To: Dongjiu Geng <gengdongjiu@huawei.com>
Cc: fam@euphon.net, peter.maydell@linaro.org, ehabkost@redhat.com,
kvm@vger.kernel.org, mst@redhat.com, mtosatti@redhat.com,
qemu-devel@nongnu.org, linuxarm@huawei.com,
shannon.zhaosl@gmail.com, zhengxiang9@huawei.com,
qemu-arm@nongnu.org, james.morse@arm.com, xuwei5@huawei.com,
jonathan.cameron@huawei.com, pbonzini@redhat.com,
rth@twiddle.net
Subject: Re: [PATCH v22 4/9] ACPI: Build Hardware Error Source Table
Date: Thu, 23 Jan 2020 16:48:08 +0100 [thread overview]
Message-ID: <20200123164808.38af0491@redhat.com> (raw)
In-Reply-To: <1578483143-14905-5-git-send-email-gengdongjiu@huawei.com>
On Wed, 8 Jan 2020 19:32:18 +0800
Dongjiu Geng <gengdongjiu@huawei.com> wrote:
> This patch builds Hardware Error Source Table(HEST) via fw_cfg blobs.
> Now it only supports ARMv8 SEA, a type of Generic Hardware Error
> Source version 2(GHESv2) error source. Afterwards, we can extend
> the supported types if needed. For the CPER section, currently it
> is memory section because kernel mainly wants userspace to handle
> the memory errors.
>
> This patch follows the spec ACPI 6.2 to build the Hardware Error
> Source table. For more detailed information, please refer to
> document: docs/specs/acpi_hest_ghes.rst
>
> build_append_ghes_notify() will help to add Hardware Error Notification
> to ACPI tables without using packed C structures and avoid endianness
> issues as API doesn't need explicit conversion.
>
> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
> Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
> Acked-by: Xiang Zheng <zhengxiang9@huawei.com>
Overall it looks fine to me, see couple nits below
> ---
> hw/acpi/ghes.c | 118 ++++++++++++++++++++++++++++++++++++++++++++++-
> hw/arm/virt-acpi-build.c | 2 +
> include/hw/acpi/ghes.h | 40 ++++++++++++++++
> 3 files changed, 159 insertions(+), 1 deletion(-)
>
> diff --git a/hw/acpi/ghes.c b/hw/acpi/ghes.c
> index b7fdbbb..9d37798 100644
> --- a/hw/acpi/ghes.c
> +++ b/hw/acpi/ghes.c
> @@ -34,9 +34,42 @@
>
> /* The max size in bytes for one error block */
> #define ACPI_GHES_MAX_RAW_DATA_LENGTH 0x400
> -
> /* Now only support ARMv8 SEA notification type error source */
> #define ACPI_GHES_ERROR_SOURCE_COUNT 1
> +/* Generic Hardware Error Source version 2 */
> +#define ACPI_GHES_SOURCE_GENERIC_ERROR_V2 10
> +/* Address offset in Generic Address Structure(GAS) */
> +#define GAS_ADDR_OFFSET 4
> +
> +/*
> + * Hardware Error Notification
> + * ACPI 4.0: 17.3.2.7 Hardware Error Notification
> + * Composes dummy Hardware Error Notification descriptor of specified type
> + */
> +static void build_ghes_hw_error_notification(GArray *table, const uint8_t type)
> +{
> + /* Type */
> + build_append_int_noprefix(table, type, 1);
> + /*
> + * Length:
> + * Total length of the structure in bytes
> + */
> + build_append_int_noprefix(table, 28, 1);
> + /* Configuration Write Enable */
> + build_append_int_noprefix(table, 0, 2);
> + /* Poll Interval */
> + build_append_int_noprefix(table, 0, 4);
> + /* Vector */
> + build_append_int_noprefix(table, 0, 4);
> + /* Switch To Polling Threshold Value */
> + build_append_int_noprefix(table, 0, 4);
> + /* Switch To Polling Threshold Window */
> + build_append_int_noprefix(table, 0, 4);
> + /* Error Threshold Value */
> + build_append_int_noprefix(table, 0, 4);
> + /* Error Threshold Window */
> + build_append_int_noprefix(table, 0, 4);
> +}
>
> /*
> * Build table for the hardware error fw_cfg blob.
> @@ -92,3 +125,86 @@ void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
> bios_linker_loader_write_pointer(linker, ACPI_GHES_DATA_ADDR_FW_CFG_FILE,
> 0, sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, 0);
> }
> +
> +/* Build Generic Hardware Error Source version 2 (GHESv2) */
> +static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker)
> +{
> + uint64_t address_offset;
> + /*
> + * Type:
> + * Generic Hardware Error Source version 2(GHESv2 - Type 10)
> + */
> + build_append_int_noprefix(table_data, ACPI_GHES_SOURCE_GENERIC_ERROR_V2, 2);
> + /* Source Id */
> + build_append_int_noprefix(table_data, source_id, 2);
> + /* Related Source Id */
> + build_append_int_noprefix(table_data, 0xffff, 2);
> + /* Flags */
> + build_append_int_noprefix(table_data, 0, 1);
> + /* Enabled */
> + build_append_int_noprefix(table_data, 1, 1);
> +
> + /* Number of Records To Pre-allocate */
> + build_append_int_noprefix(table_data, 1, 4);
> + /* Max Sections Per Record */
> + build_append_int_noprefix(table_data, 1, 4);
> + /* Max Raw Data Length */
> + build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4);
> +
> + address_offset = table_data->len;
> + /* Error Status Address */
> + build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0,
> + 4 /* QWord access */, 0);
> + bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
> + address_offset + GAS_ADDR_OFFSET,
> + sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, 0);
> +
> + /*
> + * Notification Structure
> + * Now only enable ARMv8 SEA notification type
> + */
> + build_ghes_hw_error_notification(table_data, ACPI_GHES_NOTIFY_SEA);
> +
> + /* Error Status Block Length */
> + build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4);
> +
> + /*
> + * Read Ack Register
> + * ACPI 6.1: 18.3.2.8 Generic Hardware Error Source
> + * version 2 (GHESv2 - Type 10)
> + */
> + address_offset = table_data->len;
> + build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0,
> + 4 /* QWord access */, 0);
> + bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
> + address_offset + GAS_ADDR_OFFSET,
> + sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE,
> + ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t));
> +
> + /*
> + * Read Ack Preserve
> + * We only provide the first bit in Read Ack Register to OSPM to write
> + * while the other bits are preserved.
> + */
> + build_append_int_noprefix(table_data, ~0x1ULL, 8);
> + /* Read Ack Write */
> + build_append_int_noprefix(table_data, 0x1, 8);
> +}
> +
> +/* Build Hardware Error Source Table */
> +void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
^^^^^^^^ it seems to be unused, so why it's here?
> + BIOSLinker *linker)
> +{
> + uint64_t hest_start = table_data->len;
> +
> + /* Hardware Error Source Table header*/
> + acpi_data_push(table_data, sizeof(AcpiTableHeader));
> +
> + /* Error Source Count */
> + build_append_int_noprefix(table_data, ACPI_GHES_ERROR_SOURCE_COUNT, 4);
> +
> + build_ghes_v2(table_data, ACPI_HEST_SRC_ID_SEA, linker);
> +
> + build_header(linker, table_data, (void *)(table_data->data + hest_start),
> + "HEST", table_data->len - hest_start, 1, NULL, "");
> +}
> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> index 6819fcf..837bbf9 100644
> --- a/hw/arm/virt-acpi-build.c
> +++ b/hw/arm/virt-acpi-build.c
> @@ -834,6 +834,8 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
> if (vms->ras) {
> acpi_add_table(table_offsets, tables_blob);
> build_ghes_error_table(tables->hardware_errors, tables->linker);
> + acpi_build_hest(tables_blob, tables->hardware_errors,
> + tables->linker);
not aligned properly
you can use ./scripts/checkpatch.pl to see if there is style errors
> }
>
> if (ms->numa_state->num_nodes > 0) {
> diff --git a/include/hw/acpi/ghes.h b/include/hw/acpi/ghes.h
> index 3dbda3f..09a7f86 100644
> --- a/include/hw/acpi/ghes.h
> +++ b/include/hw/acpi/ghes.h
> @@ -22,5 +22,45 @@
> #ifndef ACPI_GHES_H
> #define ACPI_GHES_H
>
> +/*
> + * Values for Hardware Error Notification Type field
> + */
> +enum AcpiGhesNotifyType {
> + /* Polled */
> + ACPI_GHES_NOTIFY_POLLED = 0,
> + /* External Interrupt */
> + ACPI_GHES_NOTIFY_EXTERNAL = 1,
> + /* Local Interrupt */
> + ACPI_GHES_NOTIFY_LOCAL = 2,
> + /* SCI */
> + ACPI_GHES_NOTIFY_SCI = 3,
> + /* NMI */
> + ACPI_GHES_NOTIFY_NMI = 4,
> + /* CMCI, ACPI 5.0: 18.3.2.7, Table 18-290 */
> + ACPI_GHES_NOTIFY_CMCI = 5,
> + /* MCE, ACPI 5.0: 18.3.2.7, Table 18-290 */
> + ACPI_GHES_NOTIFY_MCE = 6,
> + /* GPIO-Signal, ACPI 6.0: 18.3.2.7, Table 18-332 */
> + ACPI_GHES_NOTIFY_GPIO = 7,
> + /* ARMv8 SEA, ACPI 6.1: 18.3.2.9, Table 18-345 */
> + ACPI_GHES_NOTIFY_SEA = 8,
> + /* ARMv8 SEI, ACPI 6.1: 18.3.2.9, Table 18-345 */
> + ACPI_GHES_NOTIFY_SEI = 9,
> + /* External Interrupt - GSIV, ACPI 6.1: 18.3.2.9, Table 18-345 */
> + ACPI_GHES_NOTIFY_GSIV = 10,
> + /* Software Delegated Exception, ACPI 6.2: 18.3.2.9, Table 18-383 */
> + ACPI_GHES_NOTIFY_SDEI = 11,
> + /* 12 and greater are reserved */
> + ACPI_GHES_NOTIFY_RESERVED = 12
> +};
> +
> +enum {
> + ACPI_HEST_SRC_ID_SEA = 0,
> + /* future ids go here */
> + ACPI_HEST_SRC_ID_RESERVED,
> +};
> +
> void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker);
> +void acpi_build_hest(GArray *table_data, GArray *hardware_error,
> + BIOSLinker *linker);
> #endif
next prev parent reply other threads:[~2020-01-23 15:48 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-08 11:32 [PATCH v22 0/9] Add ARMv8 RAS virtualization support in QEMU Dongjiu Geng
2020-01-08 11:32 ` Dongjiu Geng
2020-01-08 11:32 ` [PATCH v22 1/9] hw/arm/virt: Introduce a RAS machine option Dongjiu Geng
2020-01-08 11:32 ` Dongjiu Geng
2020-01-08 11:32 ` [PATCH v22 2/9] docs: APEI GHES generation and CPER record description Dongjiu Geng
2020-01-08 11:32 ` Dongjiu Geng
2020-01-15 15:11 ` Igor Mammedov
2020-01-15 15:11 ` Igor Mammedov
2020-01-08 11:32 ` [PATCH v22 3/9] ACPI: Build related register address fields via hardware error fw_cfg blob Dongjiu Geng
2020-01-08 11:32 ` Dongjiu Geng
2020-01-23 15:14 ` Igor Mammedov
2020-01-23 15:14 ` Igor Mammedov
2020-02-02 14:01 ` gengdongjiu
2020-02-02 14:01 ` gengdongjiu
2020-01-08 11:32 ` [PATCH v22 4/9] ACPI: Build Hardware Error Source Table Dongjiu Geng
2020-01-08 11:32 ` Dongjiu Geng
2020-01-23 15:48 ` Igor Mammedov [this message]
2020-01-23 15:48 ` Igor Mammedov
2020-02-02 14:21 ` gengdongjiu
2020-02-02 14:21 ` gengdongjiu
2020-02-05 16:43 ` Jonathan Cameron
2020-02-05 16:43 ` Jonathan Cameron
2020-02-10 11:18 ` gengdongjiu
2020-02-10 11:18 ` gengdongjiu
2020-01-08 11:32 ` [PATCH v22 5/9] ACPI: Record the Generic Error Status Block address Dongjiu Geng
2020-01-08 11:32 ` Dongjiu Geng
2020-01-16 16:44 ` Peter Maydell
2020-01-16 16:44 ` Peter Maydell
2020-01-17 10:36 ` gengdongjiu
2020-01-17 10:36 ` gengdongjiu
2020-02-13 15:28 ` gengdongjiu
2020-02-13 15:28 ` gengdongjiu
2020-01-17 7:39 ` Philippe Mathieu-Daudé
2020-01-17 10:47 ` gengdongjiu
2020-01-17 10:47 ` gengdongjiu
2020-01-17 11:20 ` Philippe Mathieu-Daudé
2020-01-28 14:41 ` Igor Mammedov
2020-01-28 14:41 ` Igor Mammedov
2020-01-28 16:19 ` Igor Mammedov
2020-01-28 16:19 ` Igor Mammedov
2020-02-02 12:44 ` gengdongjiu
2020-02-02 12:44 ` gengdongjiu
2020-02-03 7:51 ` Igor Mammedov
2020-02-03 7:51 ` Igor Mammedov
2020-01-08 11:32 ` [PATCH v22 6/9] KVM: Move hwpoison page related functions into kvm-all.c Dongjiu Geng
2020-01-08 11:32 ` Dongjiu Geng
2020-01-08 11:32 ` [PATCH v22 7/9] ACPI: Record Generic Error Status Block(GESB) table Dongjiu Geng
2020-01-08 11:32 ` Dongjiu Geng
2020-01-28 15:29 ` Igor Mammedov
2020-01-28 15:29 ` Igor Mammedov
2020-02-02 13:42 ` gengdongjiu
2020-02-02 13:42 ` gengdongjiu
2020-02-03 7:55 ` Igor Mammedov
2020-02-03 7:55 ` Igor Mammedov
2020-01-08 11:32 ` [PATCH v22 8/9] target-arm: kvm64: handle SIGBUS signal from kernel or KVM Dongjiu Geng
2020-01-08 11:32 ` Dongjiu Geng
2020-01-16 16:28 ` Peter Maydell
2020-01-16 16:28 ` Peter Maydell
2020-01-16 16:40 ` Peter Maydell
2020-01-16 16:40 ` Peter Maydell
2020-01-17 10:04 ` gengdongjiu
2020-01-17 10:04 ` gengdongjiu
2020-01-20 12:15 ` Peter Maydell
2020-01-20 12:15 ` Peter Maydell
2020-01-22 15:30 ` gengdongjiu
2020-01-22 15:30 ` gengdongjiu
2020-01-08 11:32 ` [PATCH v22 9/9] MAINTAINERS: Add ACPI/HEST/GHES entries Dongjiu Geng
2020-01-08 11:32 ` Dongjiu Geng
2020-01-16 16:46 ` Peter Maydell
2020-01-16 16:46 ` Peter Maydell
2020-01-17 7:22 ` Philippe Mathieu-Daudé
2020-01-17 7:22 ` Philippe Mathieu-Daudé
2020-01-17 10:16 ` gengdongjiu
2020-01-17 10:16 ` gengdongjiu
2020-01-17 11:09 ` Peter Maydell
2020-01-17 11:09 ` Peter Maydell
2020-01-17 11:22 ` Philippe Mathieu-Daudé
2020-01-17 11:22 ` Philippe Mathieu-Daudé
2020-01-19 8:19 ` gengdongjiu
2020-01-19 8:19 ` gengdongjiu
2020-01-17 12:19 ` Michael S. Tsirkin
2020-01-17 12:19 ` Michael S. Tsirkin
2020-01-09 3:38 ` [PATCH v22 0/9] Add ARMv8 RAS virtualization support in QEMU gengdongjiu
2020-01-09 3:38 ` gengdongjiu
2020-01-15 13:05 ` gengdongjiu
2020-01-15 13:05 ` gengdongjiu
2020-01-15 13:05 ` gengdongjiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200123164808.38af0491@redhat.com \
--to=imammedo@redhat.com \
--cc=ehabkost@redhat.com \
--cc=fam@euphon.net \
--cc=gengdongjiu@huawei.com \
--cc=james.morse@arm.com \
--cc=jonathan.cameron@huawei.com \
--cc=kvm@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=mst@redhat.com \
--cc=mtosatti@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=shannon.zhaosl@gmail.com \
--cc=xuwei5@huawei.com \
--cc=zhengxiang9@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.