From: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
To: "Benoît Cousson"
<bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
"Tony Lindgren" <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>,
"Rob Herring" <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Mark Rutland" <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH] ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes
Date: Tue, 28 Jan 2020 12:11:47 +0530 [thread overview]
Message-ID: <20200128064147.18276-1-kishon@ti.com> (raw)
'dma-ranges' in a PCI bridge node does correctly set dma masks for PCI
devices not described in the DT. Certain DRA7 platforms (e.g., DRA76)
has RAM above 32-bit boundary (accessible with LPAE config) though the
PCIe bridge will be able to access only 32-bits. Add 'dma-ranges'
property in PCIe RC DT nodes to indicate the host bridge can access
only 32 bits.
Signed-off-by: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
---
arch/arm/boot/dts/dra7.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 73e5011f531a..c5af7530be7c 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -184,6 +184,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+ dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
@@ -238,6 +239,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+ dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: "Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>
Cc: <linux-omap@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH] ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes
Date: Tue, 28 Jan 2020 12:11:47 +0530 [thread overview]
Message-ID: <20200128064147.18276-1-kishon@ti.com> (raw)
'dma-ranges' in a PCI bridge node does correctly set dma masks for PCI
devices not described in the DT. Certain DRA7 platforms (e.g., DRA76)
has RAM above 32-bit boundary (accessible with LPAE config) though the
PCIe bridge will be able to access only 32-bits. Add 'dma-ranges'
property in PCIe RC DT nodes to indicate the host bridge can access
only 32 bits.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 73e5011f531a..c5af7530be7c 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -184,6 +184,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+ dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
@@ -238,6 +239,7 @@
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+ dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
--
2.17.1
next reply other threads:[~2020-01-28 6:41 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-28 6:41 Kishon Vijay Abraham I [this message]
2020-01-28 6:41 ` [PATCH] ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes Kishon Vijay Abraham I
2020-02-26 18:36 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200128064147.18276-1-kishon@ti.com \
--to=kishon-l0cymroini0@public.gmane.org \
--cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.