From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: "Wojciech Żmuda" <wzmuda@n7space.com>
Cc: "mark.rutland@arm.com" <mark.rutland@arm.com>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"rajan.vaja@xilinx.com" <rajan.vaja@xilinx.com>,
"Michal Mosdorf" <mmosdorf@n7space.com>,
"antoine.tenart@bootlin.com" <antoine.tenart@bootlin.com>,
"nava.manne@xilinx.com" <nava.manne@xilinx.com>,
"coresight@lists.linaro.org" <coresight@lists.linaro.org>,
"michal.simek@xilinx.com" <michal.simek@xilinx.com>,
"m.tretter@pengutronix.de" <m.tretter@pengutronix.de>,
"t-kristo@ti.com" <t-kristo@ti.com>,
"Krzysztof Pilch" <kpilch@n7space.com>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"Michał Kurowski" <mkurowski@n7space.com>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 1/1] arm64: zynqmp: Add CoreSight components
Date: Fri, 31 Jan 2020 11:36:37 -0700 [thread overview]
Message-ID: <20200131183637.GA26658@xps15> (raw)
In-Reply-To: <20200130153613.20365-2-wzmuda@n7space.com>
Hi Wojciech,
On Thu, Jan 30, 2020 at 03:36:27PM +0000, Wojciech Żmuda wrote:
> From: Wojciech Zmuda <wzmuda@n7space.com>
>
> Add nodes for the following CoreSight components:
> - ETMs for A53 cores
> - debug components for A53 cores
> - funnel gathering outputs from A53 ETMs and SoC-wide funnels
> - the only replicator
> - all TMCs: 4k ETF, 8k ETF and ETR
> - TPIU
>
> Signed-off-by: Wojciech Zmuda <wzmuda@n7space.com>
> ---
> arch/arm64/boot/dts/xilinx/zynqmp-coresight.dtsi | 272 +++++++++++++++++++++++
> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 2 +
> 2 files changed, 274 insertions(+)
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-coresight.dtsi
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-coresight.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-coresight.dtsi
> new file mode 100644
> index 000000000000..8b7579ad89cc
> --- /dev/null
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-coresight.dtsi
> @@ -0,0 +1,272 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +
Looking at other Xilinx DT files there is no space between the SPDX identifier
and the header of the file.
> +/*
> + * dtsi for Xilinx Ultrascale+ MPSoC CoreSight components
> + *
> + * Copyright (C) 2019-2020 N7 Space Sp. z o.o.
> + *
> + * Author: Wojciech Zmuda <wzmuda@n7space.com>
> + *
> + */
> +/ {
> + etm0@fec40000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0xfec40000 0 0x1000>;
> + cpu = <&cpu0>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + out-ports {
> + port {
> + etm0_out_port: endpoint {
> + remote-endpoint = <&funnel1_in_port0>;
> + };
> + };
> + };
> + };
> +
> + etm1@fed40000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0xfed40000 0 0x1000>;
> + cpu = <&cpu1>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + out-ports {
> + port {
> + etm1_out_port: endpoint {
> + remote-endpoint = <&funnel1_in_port1>;
> + };
> + };
> + };
> + };
> +
> + etm2@fee40000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0xfee40000 0 0x1000>;
> + cpu = <&cpu2>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + out-ports {
> + port {
> + etm2_out_port: endpoint {
> + remote-endpoint = <&funnel1_in_port2>;
> + };
> + };
> + };
> + };
> +
> + etm3@fef40000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0xfef40000 0 0x1000>;
> + cpu = <&cpu3>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + out-ports {
> + port {
> + etm3_out_port: endpoint {
> + remote-endpoint = <&funnel1_in_port3>;
> + };
> + };
> + };
> + };
> +
> + debug0@fec10000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0 0xfec10000 0 0x1000>;
> + cpu = <&cpu0>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + };
> +
> + debug1@fed10000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0 0xfed10000 0 0x1000>;
> + cpu = <&cpu1>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + };
> +
> + debug2@fee10000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0 0xfee10000 0 0x1000>;
> + cpu = <&cpu2>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + };
> +
> + debug3@fee10000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0 0xfef10000 0 0x1000>;
> + cpu = <&cpu3>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + };
> +
> + funnel1@fe920000 {
> + compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
> + reg = <0 0xfe920000 0 0x1000>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + in-ports {
> + #address-cells = <0x1>;
> + #size-cells = <0x0>;
> + port@0 {
> + reg = <0x0>;
> + funnel1_in_port0: endpoint {
> + remote-endpoint = <&etm0_out_port>;
> + };
> + };
> + port@1 {
> + reg = <0x1>;
> + funnel1_in_port1: endpoint {
> + remote-endpoint = <&etm1_out_port>;
> + };
> + };
> + port@2 {
> + reg = <0x2>;
> + funnel1_in_port2: endpoint {
> + remote-endpoint = <&etm2_out_port>;
> + };
> + };
> + port@3 {
> + reg = <0x3>;
> + funnel1_in_port3: endpoint {
> + remote-endpoint = <&etm3_out_port>;
> + };
> + };
> + };
> + out-ports {
> + port {
> + funnel1_out_port0: endpoint {
> + remote-endpoint = <&etf1_in_port>;
> + };
> + };
> + };
> + };
> +
> + funnel2@fe930000 {
> + compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
> + reg = <0 0xfe930000 0 0x1000>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + in-ports {
> + #address-cells = <0x1>;
> + #size-cells = <0x0>;
> + port@2 {
> + reg = <0x2>;
> + funnel2_in_port2: endpoint {
> + remote-endpoint = <&etf1_out_port>;
> + };
> + };
> + // Funnel2 has another input port connected to
> + // funnel0's output. Funnel0 gathers Cortex-R5 ETMs.
C++ style comments.
> + };
> + out-ports {
> + port {
> + funnel2_out_port0: endpoint {
> + remote-endpoint = <&etf2_in_port>;
> + };
> + };
> + };
> + };
> +
> + etf1@fe940000 {
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0 0xfe940000 0 0x1000>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + in-ports {
> + port {
> + etf1_in_port: endpoint {
> + remote-endpoint = <&funnel1_out_port0>;
> + };
> + };
> + };
> + out-ports {
> + port {
> + etf1_out_port: endpoint {
> + remote-endpoint = <&funnel2_in_port2>;
> + };
> + };
> + };
> + };
> +
> + etf2@fe950000 {
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0 0xfe950000 0 0x1000>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + in-ports {
> + port {
> + etf2_in_port: endpoint {
> + remote-endpoint = <&funnel2_out_port0>;
> + };
> + };
> + };
> + out-ports {
> + port {
> + etf2_out_port: endpoint {
> + remote-endpoint =
> + <&replicator_in_port0>;
> + };
> + };
> + };
> + };
> +
> + replicator {
> + compatible = "arm,coresight-static-replicator";
> + in-ports {
> + port {
> + replicator_in_port0: endpoint {
> + remote-endpoint = <&etf2_out_port>;
> + };
> + };
> + };
> + out-ports {
> + #address-cells = <0x1>;
> + #size-cells = <0x0>;
> + port@0 {
> + reg = <0x0>;
> + replicator_out_port0: endpoint {
> + remote-endpoint = <&etr_in_port>;
> + };
> + };
> + port@1 {
> + reg = <0x1>;
> + replicator_out_port1: endpoint {
> + remote-endpoint = <&tpiu_in_port>;
> + };
> + };
> + };
> + };
> +
> + etr@fe970000 {
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0 0xfe970000 0 0x1000>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + in-ports {
> + port {
> + etr_in_port: endpoint {
> + remote-endpoint =
> + <&replicator_out_port0>;
> + };
> + };
> + };
> + };
> +
> + tpiu@fe980000 {
> + compatible = "arm,coresight-tpiu", "arm,primecell";
> + reg = <0 0xfe980000 0 0x1000>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + in-ports {
> + port {
> + tpiu_in_port: endpoint {
> + remote-endpoint =
> + <&replicator_out_port1>;
> + };
> + };
> + };
> + };
> +};
> +
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> index 3c731e73903a..ca0a6b9f4445 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> @@ -12,6 +12,8 @@
> * the License, or (at your option) any later version.
> */
>
> +#include "zynqmp-coresight.dtsi"
> +
Those bindings are correctly used. If Michal doesn't mind the nit-picks I have
highlighted above then
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Otherwise feel free to add my tag to your next revision, which I advise you to
send out once v5.6-rc1 comes out.
Thanks,
Mathieu
> / {
> compatible = "xlnx,zynqmp";
> #address-cells = <2>;
> --
> 2.11.0
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: "Wojciech Żmuda" <wzmuda@n7space.com>
Cc: "linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"coresight@lists.linaro.org" <coresight@lists.linaro.org>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"mark.rutland@arm.com" <mark.rutland@arm.com>,
"michal.simek@xilinx.com" <michal.simek@xilinx.com>,
"m.tretter@pengutronix.de" <m.tretter@pengutronix.de>,
"nava.manne@xilinx.com" <nava.manne@xilinx.com>,
"antoine.tenart@bootlin.com" <antoine.tenart@bootlin.com>,
"t-kristo@ti.com" <t-kristo@ti.com>,
"rajan.vaja@xilinx.com" <rajan.vaja@xilinx.com>,
"Krzysztof Pilch" <kpilch@n7space.com>,
"Michal Mosdorf" <mmosdorf@n7space.com>,
"Michał Kurowski" <mkurowski@n7space.com>
Subject: Re: [PATCH 1/1] arm64: zynqmp: Add CoreSight components
Date: Fri, 31 Jan 2020 11:36:37 -0700 [thread overview]
Message-ID: <20200131183637.GA26658@xps15> (raw)
In-Reply-To: <20200130153613.20365-2-wzmuda@n7space.com>
Hi Wojciech,
On Thu, Jan 30, 2020 at 03:36:27PM +0000, Wojciech Żmuda wrote:
> From: Wojciech Zmuda <wzmuda@n7space.com>
>
> Add nodes for the following CoreSight components:
> - ETMs for A53 cores
> - debug components for A53 cores
> - funnel gathering outputs from A53 ETMs and SoC-wide funnels
> - the only replicator
> - all TMCs: 4k ETF, 8k ETF and ETR
> - TPIU
>
> Signed-off-by: Wojciech Zmuda <wzmuda@n7space.com>
> ---
> arch/arm64/boot/dts/xilinx/zynqmp-coresight.dtsi | 272 +++++++++++++++++++++++
> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 2 +
> 2 files changed, 274 insertions(+)
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-coresight.dtsi
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-coresight.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-coresight.dtsi
> new file mode 100644
> index 000000000000..8b7579ad89cc
> --- /dev/null
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-coresight.dtsi
> @@ -0,0 +1,272 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +
Looking at other Xilinx DT files there is no space between the SPDX identifier
and the header of the file.
> +/*
> + * dtsi for Xilinx Ultrascale+ MPSoC CoreSight components
> + *
> + * Copyright (C) 2019-2020 N7 Space Sp. z o.o.
> + *
> + * Author: Wojciech Zmuda <wzmuda@n7space.com>
> + *
> + */
> +/ {
> + etm0@fec40000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0xfec40000 0 0x1000>;
> + cpu = <&cpu0>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + out-ports {
> + port {
> + etm0_out_port: endpoint {
> + remote-endpoint = <&funnel1_in_port0>;
> + };
> + };
> + };
> + };
> +
> + etm1@fed40000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0xfed40000 0 0x1000>;
> + cpu = <&cpu1>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + out-ports {
> + port {
> + etm1_out_port: endpoint {
> + remote-endpoint = <&funnel1_in_port1>;
> + };
> + };
> + };
> + };
> +
> + etm2@fee40000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0xfee40000 0 0x1000>;
> + cpu = <&cpu2>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + out-ports {
> + port {
> + etm2_out_port: endpoint {
> + remote-endpoint = <&funnel1_in_port2>;
> + };
> + };
> + };
> + };
> +
> + etm3@fef40000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0xfef40000 0 0x1000>;
> + cpu = <&cpu3>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + out-ports {
> + port {
> + etm3_out_port: endpoint {
> + remote-endpoint = <&funnel1_in_port3>;
> + };
> + };
> + };
> + };
> +
> + debug0@fec10000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0 0xfec10000 0 0x1000>;
> + cpu = <&cpu0>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + };
> +
> + debug1@fed10000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0 0xfed10000 0 0x1000>;
> + cpu = <&cpu1>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + };
> +
> + debug2@fee10000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0 0xfee10000 0 0x1000>;
> + cpu = <&cpu2>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + };
> +
> + debug3@fee10000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0 0xfef10000 0 0x1000>;
> + cpu = <&cpu3>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + };
> +
> + funnel1@fe920000 {
> + compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
> + reg = <0 0xfe920000 0 0x1000>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + in-ports {
> + #address-cells = <0x1>;
> + #size-cells = <0x0>;
> + port@0 {
> + reg = <0x0>;
> + funnel1_in_port0: endpoint {
> + remote-endpoint = <&etm0_out_port>;
> + };
> + };
> + port@1 {
> + reg = <0x1>;
> + funnel1_in_port1: endpoint {
> + remote-endpoint = <&etm1_out_port>;
> + };
> + };
> + port@2 {
> + reg = <0x2>;
> + funnel1_in_port2: endpoint {
> + remote-endpoint = <&etm2_out_port>;
> + };
> + };
> + port@3 {
> + reg = <0x3>;
> + funnel1_in_port3: endpoint {
> + remote-endpoint = <&etm3_out_port>;
> + };
> + };
> + };
> + out-ports {
> + port {
> + funnel1_out_port0: endpoint {
> + remote-endpoint = <&etf1_in_port>;
> + };
> + };
> + };
> + };
> +
> + funnel2@fe930000 {
> + compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
> + reg = <0 0xfe930000 0 0x1000>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + in-ports {
> + #address-cells = <0x1>;
> + #size-cells = <0x0>;
> + port@2 {
> + reg = <0x2>;
> + funnel2_in_port2: endpoint {
> + remote-endpoint = <&etf1_out_port>;
> + };
> + };
> + // Funnel2 has another input port connected to
> + // funnel0's output. Funnel0 gathers Cortex-R5 ETMs.
C++ style comments.
> + };
> + out-ports {
> + port {
> + funnel2_out_port0: endpoint {
> + remote-endpoint = <&etf2_in_port>;
> + };
> + };
> + };
> + };
> +
> + etf1@fe940000 {
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0 0xfe940000 0 0x1000>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + in-ports {
> + port {
> + etf1_in_port: endpoint {
> + remote-endpoint = <&funnel1_out_port0>;
> + };
> + };
> + };
> + out-ports {
> + port {
> + etf1_out_port: endpoint {
> + remote-endpoint = <&funnel2_in_port2>;
> + };
> + };
> + };
> + };
> +
> + etf2@fe950000 {
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0 0xfe950000 0 0x1000>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + in-ports {
> + port {
> + etf2_in_port: endpoint {
> + remote-endpoint = <&funnel2_out_port0>;
> + };
> + };
> + };
> + out-ports {
> + port {
> + etf2_out_port: endpoint {
> + remote-endpoint =
> + <&replicator_in_port0>;
> + };
> + };
> + };
> + };
> +
> + replicator {
> + compatible = "arm,coresight-static-replicator";
> + in-ports {
> + port {
> + replicator_in_port0: endpoint {
> + remote-endpoint = <&etf2_out_port>;
> + };
> + };
> + };
> + out-ports {
> + #address-cells = <0x1>;
> + #size-cells = <0x0>;
> + port@0 {
> + reg = <0x0>;
> + replicator_out_port0: endpoint {
> + remote-endpoint = <&etr_in_port>;
> + };
> + };
> + port@1 {
> + reg = <0x1>;
> + replicator_out_port1: endpoint {
> + remote-endpoint = <&tpiu_in_port>;
> + };
> + };
> + };
> + };
> +
> + etr@fe970000 {
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0 0xfe970000 0 0x1000>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + in-ports {
> + port {
> + etr_in_port: endpoint {
> + remote-endpoint =
> + <&replicator_out_port0>;
> + };
> + };
> + };
> + };
> +
> + tpiu@fe980000 {
> + compatible = "arm,coresight-tpiu", "arm,primecell";
> + reg = <0 0xfe980000 0 0x1000>;
> + clocks = <&clk100>;
> + clock-names = "apb_pclk";
> + in-ports {
> + port {
> + tpiu_in_port: endpoint {
> + remote-endpoint =
> + <&replicator_out_port1>;
> + };
> + };
> + };
> + };
> +};
> +
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> index 3c731e73903a..ca0a6b9f4445 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> @@ -12,6 +12,8 @@
> * the License, or (at your option) any later version.
> */
>
> +#include "zynqmp-coresight.dtsi"
> +
Those bindings are correctly used. If Michal doesn't mind the nit-picks I have
highlighted above then
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Otherwise feel free to add my tag to your next revision, which I advise you to
send out once v5.6-rc1 comes out.
Thanks,
Mathieu
> / {
> compatible = "xlnx,zynqmp";
> #address-cells = <2>;
> --
> 2.11.0
>
next prev parent reply other threads:[~2020-01-31 18:36 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-30 15:36 [PATCH 0/1] Xilinx Zynq Ultrascale+ MPSoc CoreSight DT nodes Wojciech Żmuda
2020-01-30 15:36 ` Wojciech Żmuda
2020-01-30 15:36 ` [PATCH 1/1] arm64: zynqmp: Add CoreSight components Wojciech Żmuda
2020-01-30 15:36 ` Wojciech Żmuda
2020-01-31 18:36 ` Mathieu Poirier [this message]
2020-01-31 18:36 ` Mathieu Poirier
2020-01-31 18:47 ` Mathieu Poirier
2020-01-31 18:47 ` Mathieu Poirier
2020-01-31 19:37 ` Wojciech Żmuda
2020-01-31 19:37 ` Wojciech Żmuda
2020-02-03 7:12 ` Michal Simek
2020-02-03 7:12 ` Michal Simek
2020-02-03 17:57 ` Mathieu Poirier
2020-02-03 17:57 ` Mathieu Poirier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200131183637.GA26658@xps15 \
--to=mathieu.poirier@linaro.org \
--cc=antoine.tenart@bootlin.com \
--cc=coresight@lists.linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=kpilch@n7space.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=m.tretter@pengutronix.de \
--cc=mark.rutland@arm.com \
--cc=michal.simek@xilinx.com \
--cc=mkurowski@n7space.com \
--cc=mmosdorf@n7space.com \
--cc=nava.manne@xilinx.com \
--cc=rajan.vaja@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
--cc=wzmuda@n7space.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.