All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	kernel@pengutronix.de, linux-iio@vger.kernel.org,
	devicetree@vger.kernel.org,
	Maxime Roussin-Belanger <maxime.roussinbelanger@gmail.com>,
	Silvan Murer <silvan.murer@gmail.com>
Subject: Re: [PATCH 3/3] iio: dac: ltc2632: add support for LTC2636 family
Date: Thu, 6 Feb 2020 10:54:53 +0000	[thread overview]
Message-ID: <20200206105453.1d99b6ed@archlinux> (raw)
In-Reply-To: <20200202095428.238af727@archlinux>

On Sun, 2 Feb 2020 09:54:28 +0000
Jonathan Cameron <jic23@kernel.org> wrote:

> On Thu, 30 Jan 2020 14:15:49 +0100
> Uwe Kleine-König <u.kleine-koenig@pengutronix.de> wrote:
> 
> > The only difference between LTC2632 and LTC2636 is that the former has
> > two DAC channels while the latter has eight.
> > 
> > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>  
> Looks good to me. I'd like to give a little time for Maxime and Silvan
> to have a look if they wish.
> 
> If I seem to have lost this in a few weeks, give me a poke!

Applied thanks,

Jonathan

> 
> Thanks,
> 
> Jonathan
> 
> > ---
> >  drivers/iio/dac/Kconfig   |  5 ++-
> >  drivers/iio/dac/ltc2632.c | 77 +++++++++++++++++++++++++++++++++++++--
> >  2 files changed, 77 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
> > index cc42219a64f7..33a35ebe4fed 100644
> > --- a/drivers/iio/dac/Kconfig
> > +++ b/drivers/iio/dac/Kconfig
> > @@ -132,11 +132,12 @@ config LTC1660
> >  	  module will be called ltc1660.
> >  
> >  config LTC2632
> > -	tristate "Linear Technology LTC2632-12/10/8 DAC spi driver"
> > +	tristate "Linear Technology LTC2632-12/10/8 and LTC2636-12/10/8 DAC spi driver"
> >  	depends on SPI
> >  	help
> >  	  Say yes here to build support for Linear Technology
> > -	  LTC2632-12, LTC2632-10, LTC2632-8 converters (DAC).
> > +	  LTC2632-12, LTC2632-10, LTC2632-8, LTC2636-12, LTC2636-10 and
> > +	  LTC2636-8 converters (DAC).
> >  
> >  	  To compile this driver as a module, choose M here: the
> >  	  module will be called ltc2632.
> > diff --git a/drivers/iio/dac/ltc2632.c b/drivers/iio/dac/ltc2632.c
> > index 7ab92e178496..1e7ffa0f6071 100644
> > --- a/drivers/iio/dac/ltc2632.c
> > +++ b/drivers/iio/dac/ltc2632.c
> > @@ -12,8 +12,6 @@
> >  #include <linux/iio/iio.h>
> >  #include <linux/regulator/consumer.h>
> >  
> > -#define LTC2632_DAC_CHANNELS                    2
> > -
> >  #define LTC2632_ADDR_DAC0                       0x0
> >  #define LTC2632_ADDR_DAC1                       0x1
> >  
> > @@ -33,6 +31,7 @@
> >   */
> >  struct ltc2632_chip_info {
> >  	const struct iio_chan_spec *channels;
> > +	const size_t num_channels;
> >  	const int vref_mv;
> >  };
> >  
> > @@ -57,6 +56,12 @@ enum ltc2632_supported_device_ids {
> >  	ID_LTC2632H12,
> >  	ID_LTC2632H10,
> >  	ID_LTC2632H8,
> > +	ID_LTC2636L12,
> > +	ID_LTC2636L10,
> > +	ID_LTC2636L8,
> > +	ID_LTC2636H12,
> > +	ID_LTC2636H10,
> > +	ID_LTC2636H8,
> >  };
> >  
> >  static int ltc2632_spi_write(struct spi_device *spi,
> > @@ -190,6 +195,12 @@ static const struct iio_chan_spec_ext_info ltc2632_ext_info[] = {
> >  	const struct iio_chan_spec _name ## _channels[] = { \
> >  		LTC2632_CHANNEL(0, _bits), \
> >  		LTC2632_CHANNEL(1, _bits), \
> > +		LTC2632_CHANNEL(2, _bits), \
> > +		LTC2632_CHANNEL(3, _bits), \
> > +		LTC2632_CHANNEL(4, _bits), \
> > +		LTC2632_CHANNEL(5, _bits), \
> > +		LTC2632_CHANNEL(6, _bits), \
> > +		LTC2632_CHANNEL(7, _bits), \
> >  	}
> >  
> >  static DECLARE_LTC2632_CHANNELS(ltc2632x12, 12);
> > @@ -199,26 +210,62 @@ static DECLARE_LTC2632_CHANNELS(ltc2632x8, 8);
> >  static const struct ltc2632_chip_info ltc2632_chip_info_tbl[] = {
> >  	[ID_LTC2632L12] = {
> >  		.channels	= ltc2632x12_channels,
> > +		.num_channels	= 2,
> >  		.vref_mv	= 2500,
> >  	},
> >  	[ID_LTC2632L10] = {
> >  		.channels	= ltc2632x10_channels,
> > +		.num_channels	= 2,
> >  		.vref_mv	= 2500,
> >  	},
> >  	[ID_LTC2632L8] =  {
> >  		.channels	= ltc2632x8_channels,
> > +		.num_channels	= 2,
> >  		.vref_mv	= 2500,
> >  	},
> >  	[ID_LTC2632H12] = {
> >  		.channels	= ltc2632x12_channels,
> > +		.num_channels	= 2,
> >  		.vref_mv	= 4096,
> >  	},
> >  	[ID_LTC2632H10] = {
> >  		.channels	= ltc2632x10_channels,
> > +		.num_channels	= 2,
> >  		.vref_mv	= 4096,
> >  	},
> >  	[ID_LTC2632H8] =  {
> >  		.channels	= ltc2632x8_channels,
> > +		.num_channels	= 2,
> > +		.vref_mv	= 4096,
> > +	},
> > +	[ID_LTC2636L12] = {
> > +		.channels	= ltc2632x12_channels,
> > +		.num_channels	= 8,
> > +		.vref_mv	= 2500,
> > +	},
> > +	[ID_LTC2636L10] = {
> > +		.channels	= ltc2632x10_channels,
> > +		.num_channels	= 8,
> > +		.vref_mv	= 2500,
> > +	},
> > +	[ID_LTC2636L8] =  {
> > +		.channels	= ltc2632x8_channels,
> > +		.num_channels	= 8,
> > +		.vref_mv	= 2500,
> > +	},
> > +	[ID_LTC2636H12] = {
> > +		.channels	= ltc2632x12_channels,
> > +		.num_channels	= 8,
> > +		.vref_mv	= 4096,
> > +	},
> > +	[ID_LTC2636H10] = {
> > +		.channels	= ltc2632x10_channels,
> > +		.num_channels	= 8,
> > +		.vref_mv	= 4096,
> > +	},
> > +	[ID_LTC2636H8] =  {
> > +		.channels	= ltc2632x8_channels,
> > +		.num_channels	= 8,
> >  		.vref_mv	= 4096,
> >  	},
> >  };
> > @@ -287,7 +334,7 @@ static int ltc2632_probe(struct spi_device *spi)
> >  	indio_dev->info = &ltc2632_info;
> >  	indio_dev->modes = INDIO_DIRECT_MODE;
> >  	indio_dev->channels = chip_info->channels;
> > -	indio_dev->num_channels = LTC2632_DAC_CHANNELS;
> > +	indio_dev->num_channels = chip_info->num_channels;
> >  
> >  	return iio_device_register(indio_dev);
> >  }
> > @@ -312,6 +359,12 @@ static const struct spi_device_id ltc2632_id[] = {
> >  	{ "ltc2632-h12", (kernel_ulong_t)&ltc2632_chip_info_tbl[ID_LTC2632H12] },
> >  	{ "ltc2632-h10", (kernel_ulong_t)&ltc2632_chip_info_tbl[ID_LTC2632H10] },
> >  	{ "ltc2632-h8", (kernel_ulong_t)&ltc2632_chip_info_tbl[ID_LTC2632H8] },
> > +	{ "ltc2636-l12", (kernel_ulong_t)&ltc2632_chip_info_tbl[ID_LTC2636L12] },
> > +	{ "ltc2636-l10", (kernel_ulong_t)&ltc2632_chip_info_tbl[ID_LTC2636L10] },
> > +	{ "ltc2636-l8", (kernel_ulong_t)&ltc2632_chip_info_tbl[ID_LTC2636L8] },
> > +	{ "ltc2636-h12", (kernel_ulong_t)&ltc2632_chip_info_tbl[ID_LTC2636H12] },
> > +	{ "ltc2636-h10", (kernel_ulong_t)&ltc2632_chip_info_tbl[ID_LTC2636H10] },
> > +	{ "ltc2636-h8", (kernel_ulong_t)&ltc2632_chip_info_tbl[ID_LTC2636H8] },
> >  	{}
> >  };
> >  MODULE_DEVICE_TABLE(spi, ltc2632_id);
> > @@ -335,6 +388,24 @@ static const struct of_device_id ltc2632_of_match[] = {
> >  	}, {
> >  		.compatible = "lltc,ltc2632-h8",
> >  		.data = &ltc2632_chip_info_tbl[ID_LTC2632H8]
> > +	}, {
> > +		.compatible = "lltc,ltc2636-l12",
> > +		.data = &ltc2632_chip_info_tbl[ID_LTC2636L12]
> > +	}, {
> > +		.compatible = "lltc,ltc2636-l10",
> > +		.data = &ltc2632_chip_info_tbl[ID_LTC2636L10]
> > +	}, {
> > +		.compatible = "lltc,ltc2636-l8",
> > +		.data = &ltc2632_chip_info_tbl[ID_LTC2636L8]
> > +	}, {
> > +		.compatible = "lltc,ltc2636-h12",
> > +		.data = &ltc2632_chip_info_tbl[ID_LTC2636H12]
> > +	}, {
> > +		.compatible = "lltc,ltc2636-h10",
> > +		.data = &ltc2632_chip_info_tbl[ID_LTC2636H10]
> > +	}, {
> > +		.compatible = "lltc,ltc2636-h8",
> > +		.data = &ltc2632_chip_info_tbl[ID_LTC2636H8]
> >  	},
> >  	{}
> >  };  
> 


  reply	other threads:[~2020-02-06 10:55 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-30 13:15 [PATCH 1/3] dt-bindings: iio: ltc2632: expand for ltc2636 support Uwe Kleine-König
2020-01-30 13:15 ` [PATCH 2/3] iio: dac: ltc2632: drop some duplicated data Uwe Kleine-König
2020-02-06 10:54   ` Jonathan Cameron
2020-01-30 13:15 ` [PATCH 3/3] iio: dac: ltc2632: add support for LTC2636 family Uwe Kleine-König
2020-02-02  9:54   ` Jonathan Cameron
2020-02-06 10:54     ` Jonathan Cameron [this message]
2020-02-02  9:52 ` [PATCH 1/3] dt-bindings: iio: ltc2632: expand for ltc2636 support Jonathan Cameron
2020-02-06 10:42   ` Jonathan Cameron
2020-02-03 20:31 ` [PATCH 4/3] iio: dac: ltc2632: remove some unused defines Uwe Kleine-König
2020-02-06 10:29   ` Jonathan Cameron
2020-02-06 10:34     ` Uwe Kleine-König
2020-02-06 10:44       ` Jonathan Cameron
2020-02-25  9:32         ` Uwe Kleine-König
2020-03-07 11:17           ` Jonathan Cameron
2020-02-06 18:11 ` [PATCH 1/3] dt-bindings: iio: ltc2632: expand for ltc2636 support Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200206105453.1d99b6ed@archlinux \
    --to=jic23@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime.roussinbelanger@gmail.com \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    --cc=silvan.murer@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.