From: Shawn Guo <shawnguo@kernel.org>
To: Robert Jones <rjones@gateworks.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, Sascha Hauer <s.hauer@pengutronix.de>,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
NXP Linux Team <linux-imx@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] ARM: dts: imx: imx6qdl-gw553x.dtsi: add lsm9ds1 iio imu/magn support
Date: Fri, 14 Feb 2020 11:04:11 +0800 [thread overview]
Message-ID: <20200214030409.GJ22842@dragon> (raw)
In-Reply-To: <20200128221326.11393-1-rjones@gateworks.com>
On Tue, Jan 28, 2020 at 02:13:26PM -0800, Robert Jones wrote:
> Add one node for the accel/gyro i2c device and another for the separate
> magnetometer device in the lsm9ds1.
>
> Signed-off-by: Robert Jones <rjones@gateworks.com>
> ---
> arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 31 +++++++++++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> index a106689..305b2f0 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> @@ -173,6 +173,25 @@
> pinctrl-0 = <&pinctrl_i2c2>;
> status = "okay";
>
> + lsm9ds1_m@1c {
Please use a generic node name?
> + compatible = "st,lsm9ds1-magn";
> + reg = <0x1c>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_mag>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <2 IRQ_TYPE_EDGE_RISING>;
> + };
> +
> + lsm9ds1_ag@6a {
Ditto
> + compatible = "st,lsm9ds1-imu";
> + reg = <0x6a>;
> + st,drdy-int-pin = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_acc_gyro>;
> + interrupt-parent = <&gpio7>;
> + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> ltc3676: pmic@3c {
> compatible = "lltc,ltc3676";
> reg = <0x3c>;
> @@ -462,6 +481,18 @@
> >;
> };
>
> + pinctrl_mag: maggrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
> + >;
> + };
> +
> + pinctrl_acc_gyro: acc_gyrogrp {
Sort pinctrl nodes alphabetically. Also we generally do not use
underscore in node name.
Shawn
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
> + >;
> + };
> +
> pinctrl_pps: ppsgrp {
> fsl,pins = <
> MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
> --
> 2.9.2
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Robert Jones <rjones@gateworks.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] ARM: dts: imx: imx6qdl-gw553x.dtsi: add lsm9ds1 iio imu/magn support
Date: Fri, 14 Feb 2020 11:04:11 +0800 [thread overview]
Message-ID: <20200214030409.GJ22842@dragon> (raw)
In-Reply-To: <20200128221326.11393-1-rjones@gateworks.com>
On Tue, Jan 28, 2020 at 02:13:26PM -0800, Robert Jones wrote:
> Add one node for the accel/gyro i2c device and another for the separate
> magnetometer device in the lsm9ds1.
>
> Signed-off-by: Robert Jones <rjones@gateworks.com>
> ---
> arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 31 +++++++++++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> index a106689..305b2f0 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> @@ -173,6 +173,25 @@
> pinctrl-0 = <&pinctrl_i2c2>;
> status = "okay";
>
> + lsm9ds1_m@1c {
Please use a generic node name?
> + compatible = "st,lsm9ds1-magn";
> + reg = <0x1c>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_mag>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <2 IRQ_TYPE_EDGE_RISING>;
> + };
> +
> + lsm9ds1_ag@6a {
Ditto
> + compatible = "st,lsm9ds1-imu";
> + reg = <0x6a>;
> + st,drdy-int-pin = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_acc_gyro>;
> + interrupt-parent = <&gpio7>;
> + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> ltc3676: pmic@3c {
> compatible = "lltc,ltc3676";
> reg = <0x3c>;
> @@ -462,6 +481,18 @@
> >;
> };
>
> + pinctrl_mag: maggrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
> + >;
> + };
> +
> + pinctrl_acc_gyro: acc_gyrogrp {
Sort pinctrl nodes alphabetically. Also we generally do not use
underscore in node name.
Shawn
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
> + >;
> + };
> +
> pinctrl_pps: ppsgrp {
> fsl,pins = <
> MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
> --
> 2.9.2
>
next prev parent reply other threads:[~2020-02-14 3:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-28 22:13 [PATCH] ARM: dts: imx: imx6qdl-gw553x.dtsi: add lsm9ds1 iio imu/magn support Robert Jones
2020-01-28 22:13 ` Robert Jones
2020-02-14 3:04 ` Shawn Guo [this message]
2020-02-14 3:04 ` Shawn Guo
2020-02-14 3:05 ` Shawn Guo
2020-02-14 3:05 ` Shawn Guo
-- strict thread matches above, loose matches on Subject: below --
2019-12-05 21:07 Robert Jones
2019-10-21 20:56 Robert Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200214030409.GJ22842@dragon \
--to=shawnguo@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=rjones@gateworks.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.