All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>,
	Sasha Levin <sashal@kernel.org>,
	linux-sh@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	linux-gpio@vger.kernel.org
Subject: [PATCH AUTOSEL 4.4 055/100] pinctrl: sh-pfc: sh7269: Fix CAN function GPIOs
Date: Fri, 14 Feb 2020 11:23:39 -0500	[thread overview]
Message-ID: <20200214162425.21071-55-sashal@kernel.org> (raw)
In-Reply-To: <20200214162425.21071-1-sashal@kernel.org>

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 02aeb2f21530c98fc3ca51028eda742a3fafbd9f ]

pinmux_func_gpios[] contains a hole due to the missing function GPIO
definition for the "CTX0&CTX1" signal, which is the logical "AND" of the
first two CAN outputs.

A closer look reveals other issues:
  - Some functionality is available on alternative pins, but the
    PINMUX_DATA() entries is using the wrong marks,
  - Several configurations are missing.

Fix this by:
  - Renaming CTX0CTX1CTX2_MARK, CRX0CRX1_PJ22_MARK, and
    CRX0CRX1CRX2_PJ20_MARK to CTX0_CTX1_CTX2_MARK, CRX0_CRX1_PJ22_MARK,
    resp. CRX0_CRX1_CRX2_PJ20_MARK for consistency with the
    corresponding enum IDs,
  - Adding all missing enum IDs and marks,
  - Use the right (*_PJ2x) variants for alternative pins,
  - Adding all missing configurations to pinmux_data[],
  - Adding all missing function GPIO definitions to pinmux_func_gpios[].

See SH7268 Group, SH7269 Group User’s Manual: Hardware, Rev. 2.00:
  [1] Table 1.4 List of Pins
  [2] Figure 23.29 Connection Example when Using Channels 0 and 1 as One
      Channel (64 Mailboxes × 1 Channel) and Channel 2 as One Channel
      (32 Mailboxes × 1 Channel),
  [3] Figure 23.30 Connection Example when Using Channels 0, 1, and 2 as
      One Channel (96 Mailboxes × 1 Channel),
  [4] Table 48.3 Multiplexed Pins (Port B),
  [5] Table 48.4 Multiplexed Pins (Port C),
  [6] Table 48.10 Multiplexed Pins (Port J),
  [7] Section 48.2.4 Port B Control Registers 0 to 5 (PBCR0 to PBCR5).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191218194812.12741-5-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sh/include/cpu-sh2a/cpu/sh7269.h | 11 ++++++--
 drivers/pinctrl/sh-pfc/pfc-sh7269.c   | 39 ++++++++++++++++++---------
 2 files changed, 36 insertions(+), 14 deletions(-)

diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
index 2a0ca8780f0d8..e4caddd443daf 100644
--- a/arch/sh/include/cpu-sh2a/cpu/sh7269.h
+++ b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
@@ -79,8 +79,15 @@ enum {
 	GPIO_FN_WDTOVF,
 
 	/* CAN */
-	GPIO_FN_CTX1, GPIO_FN_CRX1, GPIO_FN_CTX0, GPIO_FN_CTX0_CTX1,
-	GPIO_FN_CRX0, GPIO_FN_CRX0_CRX1, GPIO_FN_CRX0_CRX1_CRX2,
+	GPIO_FN_CTX2, GPIO_FN_CRX2,
+	GPIO_FN_CTX1, GPIO_FN_CRX1,
+	GPIO_FN_CTX0, GPIO_FN_CRX0,
+	GPIO_FN_CTX0_CTX1, GPIO_FN_CRX0_CRX1,
+	GPIO_FN_CTX0_CTX1_CTX2, GPIO_FN_CRX0_CRX1_CRX2,
+	GPIO_FN_CTX2_PJ21, GPIO_FN_CRX2_PJ20,
+	GPIO_FN_CTX1_PJ23, GPIO_FN_CRX1_PJ22,
+	GPIO_FN_CTX0_CTX1_PJ23, GPIO_FN_CRX0_CRX1_PJ22,
+	GPIO_FN_CTX0_CTX1_CTX2_PJ21, GPIO_FN_CRX0_CRX1_CRX2_PJ20,
 
 	/* DMAC */
 	GPIO_FN_TEND0, GPIO_FN_DACK0, GPIO_FN_DREQ0,
diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7269.c b/drivers/pinctrl/sh-pfc/pfc-sh7269.c
index cfdb4fc177c3e..3df0c0d139d08 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh7269.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh7269.c
@@ -740,13 +740,12 @@ enum {
 	CRX0_MARK, CTX0_MARK,
 	CRX1_MARK, CTX1_MARK,
 	CRX2_MARK, CTX2_MARK,
-	CRX0_CRX1_MARK,
-	CRX0_CRX1_CRX2_MARK,
-	CTX0CTX1CTX2_MARK,
+	CRX0_CRX1_MARK, CTX0_CTX1_MARK,
+	CRX0_CRX1_CRX2_MARK, CTX0_CTX1_CTX2_MARK,
 	CRX1_PJ22_MARK, CTX1_PJ23_MARK,
 	CRX2_PJ20_MARK, CTX2_PJ21_MARK,
-	CRX0CRX1_PJ22_MARK,
-	CRX0CRX1CRX2_PJ20_MARK,
+	CRX0_CRX1_PJ22_MARK, CTX0_CTX1_PJ23_MARK,
+	CRX0_CRX1_CRX2_PJ20_MARK, CTX0_CTX1_CTX2_PJ21_MARK,
 
 	/* VDC */
 	DV_CLK_MARK,
@@ -824,6 +823,7 @@ static const u16 pinmux_data[] = {
 	PINMUX_DATA(CS3_MARK, PC8MD_001),
 	PINMUX_DATA(TXD7_MARK, PC8MD_010),
 	PINMUX_DATA(CTX1_MARK, PC8MD_011),
+	PINMUX_DATA(CTX0_CTX1_MARK, PC8MD_100),
 
 	PINMUX_DATA(PC7_DATA, PC7MD_000),
 	PINMUX_DATA(CKE_MARK, PC7MD_001),
@@ -836,11 +836,12 @@ static const u16 pinmux_data[] = {
 	PINMUX_DATA(CAS_MARK, PC6MD_001),
 	PINMUX_DATA(SCK7_MARK, PC6MD_010),
 	PINMUX_DATA(CTX0_MARK, PC6MD_011),
+	PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC6MD_100),
 
 	PINMUX_DATA(PC5_DATA, PC5MD_000),
 	PINMUX_DATA(RAS_MARK, PC5MD_001),
 	PINMUX_DATA(CRX0_MARK, PC5MD_011),
-	PINMUX_DATA(CTX0CTX1CTX2_MARK, PC5MD_100),
+	PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC5MD_100),
 	PINMUX_DATA(IRQ0_PC_MARK, PC5MD_101),
 
 	PINMUX_DATA(PC4_DATA, PC4MD_00),
@@ -1292,30 +1293,32 @@ static const u16 pinmux_data[] = {
 	PINMUX_DATA(LCD_DATA23_PJ23_MARK, PJ23MD_010),
 	PINMUX_DATA(LCD_TCON6_MARK, PJ23MD_011),
 	PINMUX_DATA(IRQ3_PJ_MARK, PJ23MD_100),
-	PINMUX_DATA(CTX1_MARK, PJ23MD_101),
+	PINMUX_DATA(CTX1_PJ23_MARK, PJ23MD_101),
+	PINMUX_DATA(CTX0_CTX1_PJ23_MARK, PJ23MD_110),
 
 	PINMUX_DATA(PJ22_DATA, PJ22MD_000),
 	PINMUX_DATA(DV_DATA22_MARK, PJ22MD_001),
 	PINMUX_DATA(LCD_DATA22_PJ22_MARK, PJ22MD_010),
 	PINMUX_DATA(LCD_TCON5_MARK, PJ22MD_011),
 	PINMUX_DATA(IRQ2_PJ_MARK, PJ22MD_100),
-	PINMUX_DATA(CRX1_MARK, PJ22MD_101),
-	PINMUX_DATA(CRX0_CRX1_MARK, PJ22MD_110),
+	PINMUX_DATA(CRX1_PJ22_MARK, PJ22MD_101),
+	PINMUX_DATA(CRX0_CRX1_PJ22_MARK, PJ22MD_110),
 
 	PINMUX_DATA(PJ21_DATA, PJ21MD_000),
 	PINMUX_DATA(DV_DATA21_MARK, PJ21MD_001),
 	PINMUX_DATA(LCD_DATA21_PJ21_MARK, PJ21MD_010),
 	PINMUX_DATA(LCD_TCON4_MARK, PJ21MD_011),
 	PINMUX_DATA(IRQ1_PJ_MARK, PJ21MD_100),
-	PINMUX_DATA(CTX2_MARK, PJ21MD_101),
+	PINMUX_DATA(CTX2_PJ21_MARK, PJ21MD_101),
+	PINMUX_DATA(CTX0_CTX1_CTX2_PJ21_MARK, PJ21MD_110),
 
 	PINMUX_DATA(PJ20_DATA, PJ20MD_000),
 	PINMUX_DATA(DV_DATA20_MARK, PJ20MD_001),
 	PINMUX_DATA(LCD_DATA20_PJ20_MARK, PJ20MD_010),
 	PINMUX_DATA(LCD_TCON3_MARK, PJ20MD_011),
 	PINMUX_DATA(IRQ0_PJ_MARK, PJ20MD_100),
-	PINMUX_DATA(CRX2_MARK, PJ20MD_101),
-	PINMUX_DATA(CRX0CRX1CRX2_PJ20_MARK, PJ20MD_110),
+	PINMUX_DATA(CRX2_PJ20_MARK, PJ20MD_101),
+	PINMUX_DATA(CRX0_CRX1_CRX2_PJ20_MARK, PJ20MD_110),
 
 	PINMUX_DATA(PJ19_DATA, PJ19MD_000),
 	PINMUX_DATA(DV_DATA19_MARK, PJ19MD_001),
@@ -1666,12 +1669,24 @@ static const struct pinmux_func pinmux_func_gpios[] = {
 	GPIO_FN(WDTOVF),
 
 	/* CAN */
+	GPIO_FN(CTX2),
+	GPIO_FN(CRX2),
 	GPIO_FN(CTX1),
 	GPIO_FN(CRX1),
 	GPIO_FN(CTX0),
 	GPIO_FN(CRX0),
+	GPIO_FN(CTX0_CTX1),
 	GPIO_FN(CRX0_CRX1),
+	GPIO_FN(CTX0_CTX1_CTX2),
 	GPIO_FN(CRX0_CRX1_CRX2),
+	GPIO_FN(CTX2_PJ21),
+	GPIO_FN(CRX2_PJ20),
+	GPIO_FN(CTX1_PJ23),
+	GPIO_FN(CRX1_PJ22),
+	GPIO_FN(CTX0_CTX1_PJ23),
+	GPIO_FN(CRX0_CRX1_PJ22),
+	GPIO_FN(CTX0_CTX1_CTX2_PJ21),
+	GPIO_FN(CRX0_CRX1_CRX2_PJ20),
 
 	/* DMAC */
 	GPIO_FN(TEND0),
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>,
	Sasha Levin <sashal@kernel.org>,
	linux-sh@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	linux-gpio@vger.kernel.org
Subject: [PATCH AUTOSEL 4.4 055/100] pinctrl: sh-pfc: sh7269: Fix CAN function GPIOs
Date: Fri, 14 Feb 2020 16:23:39 +0000	[thread overview]
Message-ID: <20200214162425.21071-55-sashal@kernel.org> (raw)
In-Reply-To: <20200214162425.21071-1-sashal@kernel.org>

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 02aeb2f21530c98fc3ca51028eda742a3fafbd9f ]

pinmux_func_gpios[] contains a hole due to the missing function GPIO
definition for the "CTX0&CTX1" signal, which is the logical "AND" of the
first two CAN outputs.

A closer look reveals other issues:
  - Some functionality is available on alternative pins, but the
    PINMUX_DATA() entries is using the wrong marks,
  - Several configurations are missing.

Fix this by:
  - Renaming CTX0CTX1CTX2_MARK, CRX0CRX1_PJ22_MARK, and
    CRX0CRX1CRX2_PJ20_MARK to CTX0_CTX1_CTX2_MARK, CRX0_CRX1_PJ22_MARK,
    resp. CRX0_CRX1_CRX2_PJ20_MARK for consistency with the
    corresponding enum IDs,
  - Adding all missing enum IDs and marks,
  - Use the right (*_PJ2x) variants for alternative pins,
  - Adding all missing configurations to pinmux_data[],
  - Adding all missing function GPIO definitions to pinmux_func_gpios[].

See SH7268 Group, SH7269 Group User’s Manual: Hardware, Rev. 2.00:
  [1] Table 1.4 List of Pins
  [2] Figure 23.29 Connection Example when Using Channels 0 and 1 as One
      Channel (64 Mailboxes × 1 Channel) and Channel 2 as One Channel
      (32 Mailboxes × 1 Channel),
  [3] Figure 23.30 Connection Example when Using Channels 0, 1, and 2 as
      One Channel (96 Mailboxes × 1 Channel),
  [4] Table 48.3 Multiplexed Pins (Port B),
  [5] Table 48.4 Multiplexed Pins (Port C),
  [6] Table 48.10 Multiplexed Pins (Port J),
  [7] Section 48.2.4 Port B Control Registers 0 to 5 (PBCR0 to PBCR5).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191218194812.12741-5-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sh/include/cpu-sh2a/cpu/sh7269.h | 11 ++++++--
 drivers/pinctrl/sh-pfc/pfc-sh7269.c   | 39 ++++++++++++++++++---------
 2 files changed, 36 insertions(+), 14 deletions(-)

diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
index 2a0ca8780f0d8..e4caddd443daf 100644
--- a/arch/sh/include/cpu-sh2a/cpu/sh7269.h
+++ b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
@@ -79,8 +79,15 @@ enum {
 	GPIO_FN_WDTOVF,
 
 	/* CAN */
-	GPIO_FN_CTX1, GPIO_FN_CRX1, GPIO_FN_CTX0, GPIO_FN_CTX0_CTX1,
-	GPIO_FN_CRX0, GPIO_FN_CRX0_CRX1, GPIO_FN_CRX0_CRX1_CRX2,
+	GPIO_FN_CTX2, GPIO_FN_CRX2,
+	GPIO_FN_CTX1, GPIO_FN_CRX1,
+	GPIO_FN_CTX0, GPIO_FN_CRX0,
+	GPIO_FN_CTX0_CTX1, GPIO_FN_CRX0_CRX1,
+	GPIO_FN_CTX0_CTX1_CTX2, GPIO_FN_CRX0_CRX1_CRX2,
+	GPIO_FN_CTX2_PJ21, GPIO_FN_CRX2_PJ20,
+	GPIO_FN_CTX1_PJ23, GPIO_FN_CRX1_PJ22,
+	GPIO_FN_CTX0_CTX1_PJ23, GPIO_FN_CRX0_CRX1_PJ22,
+	GPIO_FN_CTX0_CTX1_CTX2_PJ21, GPIO_FN_CRX0_CRX1_CRX2_PJ20,
 
 	/* DMAC */
 	GPIO_FN_TEND0, GPIO_FN_DACK0, GPIO_FN_DREQ0,
diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7269.c b/drivers/pinctrl/sh-pfc/pfc-sh7269.c
index cfdb4fc177c3e..3df0c0d139d08 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh7269.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh7269.c
@@ -740,13 +740,12 @@ enum {
 	CRX0_MARK, CTX0_MARK,
 	CRX1_MARK, CTX1_MARK,
 	CRX2_MARK, CTX2_MARK,
-	CRX0_CRX1_MARK,
-	CRX0_CRX1_CRX2_MARK,
-	CTX0CTX1CTX2_MARK,
+	CRX0_CRX1_MARK, CTX0_CTX1_MARK,
+	CRX0_CRX1_CRX2_MARK, CTX0_CTX1_CTX2_MARK,
 	CRX1_PJ22_MARK, CTX1_PJ23_MARK,
 	CRX2_PJ20_MARK, CTX2_PJ21_MARK,
-	CRX0CRX1_PJ22_MARK,
-	CRX0CRX1CRX2_PJ20_MARK,
+	CRX0_CRX1_PJ22_MARK, CTX0_CTX1_PJ23_MARK,
+	CRX0_CRX1_CRX2_PJ20_MARK, CTX0_CTX1_CTX2_PJ21_MARK,
 
 	/* VDC */
 	DV_CLK_MARK,
@@ -824,6 +823,7 @@ static const u16 pinmux_data[] = {
 	PINMUX_DATA(CS3_MARK, PC8MD_001),
 	PINMUX_DATA(TXD7_MARK, PC8MD_010),
 	PINMUX_DATA(CTX1_MARK, PC8MD_011),
+	PINMUX_DATA(CTX0_CTX1_MARK, PC8MD_100),
 
 	PINMUX_DATA(PC7_DATA, PC7MD_000),
 	PINMUX_DATA(CKE_MARK, PC7MD_001),
@@ -836,11 +836,12 @@ static const u16 pinmux_data[] = {
 	PINMUX_DATA(CAS_MARK, PC6MD_001),
 	PINMUX_DATA(SCK7_MARK, PC6MD_010),
 	PINMUX_DATA(CTX0_MARK, PC6MD_011),
+	PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC6MD_100),
 
 	PINMUX_DATA(PC5_DATA, PC5MD_000),
 	PINMUX_DATA(RAS_MARK, PC5MD_001),
 	PINMUX_DATA(CRX0_MARK, PC5MD_011),
-	PINMUX_DATA(CTX0CTX1CTX2_MARK, PC5MD_100),
+	PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC5MD_100),
 	PINMUX_DATA(IRQ0_PC_MARK, PC5MD_101),
 
 	PINMUX_DATA(PC4_DATA, PC4MD_00),
@@ -1292,30 +1293,32 @@ static const u16 pinmux_data[] = {
 	PINMUX_DATA(LCD_DATA23_PJ23_MARK, PJ23MD_010),
 	PINMUX_DATA(LCD_TCON6_MARK, PJ23MD_011),
 	PINMUX_DATA(IRQ3_PJ_MARK, PJ23MD_100),
-	PINMUX_DATA(CTX1_MARK, PJ23MD_101),
+	PINMUX_DATA(CTX1_PJ23_MARK, PJ23MD_101),
+	PINMUX_DATA(CTX0_CTX1_PJ23_MARK, PJ23MD_110),
 
 	PINMUX_DATA(PJ22_DATA, PJ22MD_000),
 	PINMUX_DATA(DV_DATA22_MARK, PJ22MD_001),
 	PINMUX_DATA(LCD_DATA22_PJ22_MARK, PJ22MD_010),
 	PINMUX_DATA(LCD_TCON5_MARK, PJ22MD_011),
 	PINMUX_DATA(IRQ2_PJ_MARK, PJ22MD_100),
-	PINMUX_DATA(CRX1_MARK, PJ22MD_101),
-	PINMUX_DATA(CRX0_CRX1_MARK, PJ22MD_110),
+	PINMUX_DATA(CRX1_PJ22_MARK, PJ22MD_101),
+	PINMUX_DATA(CRX0_CRX1_PJ22_MARK, PJ22MD_110),
 
 	PINMUX_DATA(PJ21_DATA, PJ21MD_000),
 	PINMUX_DATA(DV_DATA21_MARK, PJ21MD_001),
 	PINMUX_DATA(LCD_DATA21_PJ21_MARK, PJ21MD_010),
 	PINMUX_DATA(LCD_TCON4_MARK, PJ21MD_011),
 	PINMUX_DATA(IRQ1_PJ_MARK, PJ21MD_100),
-	PINMUX_DATA(CTX2_MARK, PJ21MD_101),
+	PINMUX_DATA(CTX2_PJ21_MARK, PJ21MD_101),
+	PINMUX_DATA(CTX0_CTX1_CTX2_PJ21_MARK, PJ21MD_110),
 
 	PINMUX_DATA(PJ20_DATA, PJ20MD_000),
 	PINMUX_DATA(DV_DATA20_MARK, PJ20MD_001),
 	PINMUX_DATA(LCD_DATA20_PJ20_MARK, PJ20MD_010),
 	PINMUX_DATA(LCD_TCON3_MARK, PJ20MD_011),
 	PINMUX_DATA(IRQ0_PJ_MARK, PJ20MD_100),
-	PINMUX_DATA(CRX2_MARK, PJ20MD_101),
-	PINMUX_DATA(CRX0CRX1CRX2_PJ20_MARK, PJ20MD_110),
+	PINMUX_DATA(CRX2_PJ20_MARK, PJ20MD_101),
+	PINMUX_DATA(CRX0_CRX1_CRX2_PJ20_MARK, PJ20MD_110),
 
 	PINMUX_DATA(PJ19_DATA, PJ19MD_000),
 	PINMUX_DATA(DV_DATA19_MARK, PJ19MD_001),
@@ -1666,12 +1669,24 @@ static const struct pinmux_func pinmux_func_gpios[] = {
 	GPIO_FN(WDTOVF),
 
 	/* CAN */
+	GPIO_FN(CTX2),
+	GPIO_FN(CRX2),
 	GPIO_FN(CTX1),
 	GPIO_FN(CRX1),
 	GPIO_FN(CTX0),
 	GPIO_FN(CRX0),
+	GPIO_FN(CTX0_CTX1),
 	GPIO_FN(CRX0_CRX1),
+	GPIO_FN(CTX0_CTX1_CTX2),
 	GPIO_FN(CRX0_CRX1_CRX2),
+	GPIO_FN(CTX2_PJ21),
+	GPIO_FN(CRX2_PJ20),
+	GPIO_FN(CTX1_PJ23),
+	GPIO_FN(CRX1_PJ22),
+	GPIO_FN(CTX0_CTX1_PJ23),
+	GPIO_FN(CRX0_CRX1_PJ22),
+	GPIO_FN(CTX0_CTX1_CTX2_PJ21),
+	GPIO_FN(CRX0_CRX1_CRX2_PJ20),
 
 	/* DMAC */
 	GPIO_FN(TEND0),
-- 
2.20.1

  parent reply	other threads:[~2020-02-14 16:25 UTC|newest]

Thread overview: 155+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-14 16:22 [PATCH AUTOSEL 4.4 001/100] drm/gma500: Fixup fbdev stolen size usage evaluation Sasha Levin
2020-02-14 16:22 ` Sasha Levin
2020-02-14 16:22 ` [PATCH AUTOSEL 4.4 002/100] nfsd4: avoid NULL deference on strange COPY compounds Sasha Levin
2020-02-14 16:22 ` [PATCH AUTOSEL 4.4 003/100] brcmfmac: Fix use after free in brcmf_sdio_readframes() Sasha Levin
2020-02-14 16:22 ` [PATCH AUTOSEL 4.4 004/100] gianfar: Fix TX timestamping with a stacked DSA driver Sasha Levin
2020-02-14 16:22 ` [PATCH AUTOSEL 4.4 005/100] pinctrl: sh-pfc: sh7264: Fix CAN function GPIOs Sasha Levin
2020-02-14 16:22 ` [PATCH AUTOSEL 4.4 006/100] media: i2c: mt9v032: fix enum mbus codes and frame sizes Sasha Levin
2020-02-14 16:22 ` [PATCH AUTOSEL 4.4 007/100] media: sti: bdisp: fix a possible sleep-in-atomic-context bug in bdisp_device_run() Sasha Levin
2020-02-14 16:22 ` [PATCH AUTOSEL 4.4 008/100] efi/x86: Map the entire EFI vendor string before copying it Sasha Levin
2020-02-14 16:22 ` [PATCH AUTOSEL 4.4 009/100] MIPS: Loongson: Fix potential NULL dereference in loongson3_platform_init() Sasha Levin
2020-02-14 16:22 ` [PATCH AUTOSEL 4.4 010/100] uio: fix a sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol() Sasha Levin
2020-02-14 16:22 ` [PATCH AUTOSEL 4.4 011/100] usb: gadget: udc: fix possible sleep-in-atomic-context bugs in gr_probe() Sasha Levin
2020-02-14 16:22 ` [PATCH AUTOSEL 4.4 012/100] nfs: NFS_SWAP should depend on SWAP Sasha Levin
2020-02-14 16:22 ` [PATCH AUTOSEL 4.4 013/100] jbd2: clear JBD2_ABORT flag before journal_reset to update log tail info when load journal Sasha Levin
2020-02-14 16:22 ` [PATCH AUTOSEL 4.4 014/100] scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails Sasha Levin
2020-02-14 16:22   ` Sasha Levin
2020-02-14 16:22   ` Sasha Levin
2020-02-14 16:22 ` [PATCH AUTOSEL 4.4 015/100] tracing: Fix very unlikely race of registering two stat tracers Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 016/100] ext4, jbd2: ensure panic when aborting with zero errno Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 017/100] libertas: don't exit from lbs_ibss_join_existing() with RCU read lock held Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 018/100] libertas: make lbs_ibss_join_existing() return error code on rates overflow Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 019/100] kconfig: fix broken dependency in randconfig-generated .config Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 020/100] clk: qcom: rcg2: Don't crash if our parent can't be found; return an error Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 021/100] drm/amdgpu: remove 4 set but not used variable in amdgpu_atombios_get_connector_info_from_object_table Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 022/100] drm/amdgpu: remove set but not used variable 'dig_connector' Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 023/100] drm/amdgpu: remove set but not used variable 'dig' Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 024/100] drm/amdgpu: remove always false comparison in 'amdgpu_atombios_i2c_process_i2c_ch' Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 025/100] drm/amdgpu: remove set but not used variable 'mc_shared_chmap' Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 026/100] drm/amdgpu: remove set but not used variable 'amdgpu_connector' Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 027/100] drm/gma500: remove set but not used variable 'htotal' Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 028/100] drm/gma500: remove set but not used variable 'error' Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 029/100] drm/gma500: remove set but not used variable 'is_hdmi', 'is_crt' Sasha Levin
2020-02-14 16:23   ` [PATCH AUTOSEL 4.4 029/100] drm/gma500: remove set but not used variable 'is_hdmi','is_crt' Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 030/100] drm/gma500: remove set but not used variable 'channel_eq' Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 031/100] drm/radeon: remove set but not used variable 'size', 'relocs_chunk' Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 032/100] drm/radeon: remove set but not used variable 'dig_connector' Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 033/100] drm/radeon: remove set but not used variable 'radeon_connector' Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 034/100] drm/radeon: remove set but not used variable 'blocks' Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 035/100] drm/radeon: remove set but not used variable 'tv_pll_cntl1' Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 036/100] regulator: rk808: Lower log level on optional GPIOs being not available Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 037/100] NFC: port100: Convert cpu_to_le16(le16_to_cpu(E1) + E2) to use le16_add_cpu() Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 038/100] tty: omap-serial: remove set but unused variable Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 039/100] padata: always acquire cpu_hotplug_lock before pinst->lock Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 040/100] reiserfs: Fix spurious unlock in reiserfs_fill_super() error handling Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 041/100] isdn: don't mark kcapi_proc_exit as __exit Sasha Levin
2020-02-14 16:23 ` [alsa-devel] [PATCH AUTOSEL 4.4 042/100] ALSA: usx2y: Adjust indentation in snd_usX2Y_hwdep_dsp_status Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 043/100] b43legacy: Fix -Wcast-function-type Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 044/100] ipw2x00: " Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 045/100] iwlegacy: " Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 046/100] rtlwifi: rtl_pci: " Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 047/100] bcma: remove set but not used variable 'sizel' Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 048/100] orinoco: avoid assertion in case of NULL pointer Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 049/100] ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1 Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 050/100] scsi: aic7xxx: Adjust indentation in ahc_find_syncrate Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 051/100] ARM: dts: r8a7779: Add device node for ARM global timer Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 052/100] rtc: hym8563: Return -EINVAL if the time is known to be invalid Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 053/100] x86/vdso: Provide missing include file Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 054/100] pinctrl: sh-pfc: r8a7778: Fix duplicate SDSELF_B and SD1_CLK_B Sasha Levin
2020-02-14 16:23 ` Sasha Levin [this message]
2020-02-14 16:23   ` [PATCH AUTOSEL 4.4 055/100] pinctrl: sh-pfc: sh7269: Fix CAN function GPIOs Sasha Levin
2020-02-14 16:23 ` [alsa-devel] [PATCH AUTOSEL 4.4 056/100] ALSA: sh: Fix compile warning wrt const Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 057/100] tools lib api fs: Fix gcc9 stringop-truncation compilation error Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 058/100] drm/gma500: remove set but not used variables 'hist_reg' Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 059/100] usbip: Fix unsafe unaligned pointer usage Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 060/100] soc/tegra: fuse: Correct straps' address for older Tegra124 device trees Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 061/100] ARM: dts: at91: sama5d3: fix maximum peripheral clock rates Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 062/100] ARM: dts: at91: sama5d3: define clock rate range for tcb1 Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 063/100] rcu: Use WRITE_ONCE() for assignments to ->pprev for hlist_nulls Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 064/100] Input: edt-ft5x06 - work around first register access error Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 065/100] wan: ixp4xx_hss: fix compile-testing on 64-bit Sasha Levin
2020-02-14 16:23 ` [alsa-devel] [PATCH AUTOSEL 4.4 066/100] ASoC: atmel: fix build error with CONFIG_SND_ATMEL_SOC_DMA=m Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 067/100] PCI: Don't disable bridge BARs when assigning bus resources Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 068/100] driver core: Print device when resources present in really_probe() Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 069/100] ARC: [plat-axs10x]: Add missing multicast filter number to GMAC node Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 071/100] drm/vmwgfx: prevent memory leak in vmw_cmdbuf_res_add Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 072/100] iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 073/100] scsi: iscsi: Don't destroy session if there are outstanding connections Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 074/100] ide: remove set but not used variable 'hwif' Sasha Levin
2020-02-14 16:23   ` Sasha Levin
2020-02-14 16:23 ` [PATCH AUTOSEL 4.4 075/100] cmd64x: potential buffer overflow in cmd64x_program_timings() Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 076/100] ide: serverworks: potential overflow in svwks_set_pio_mode() Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 077/100] remoteproc: Initialize rproc_class before use Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 078/100] s390/ftrace: generate traced function stack frame Sasha Levin
2020-02-14 16:24 ` [alsa-devel] [PATCH AUTOSEL 4.4 079/100] ALSA: hda - Add docking station support for Lenovo Thinkpad T420s Sasha Levin
2020-02-14 16:24   ` Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 080/100] char: hpet: Use flexible-array member Sasha Levin
2020-02-14 17:43   ` Eric Biggers
2020-02-14 23:36     ` Sasha Levin
2020-02-14 23:47       ` Eric Biggers
2020-02-15  0:03       ` Greg Kroah-Hartman
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 081/100] jbd2: switch to use jbd2_journal_abort() when failed to submit the commit record Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 082/100] ARM: 8951/1: Fix Kexec compilation issue Sasha Levin
2020-02-14 16:24   ` Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 083/100] hostap: Adjust indentation in prism2_hostapd_add_sta Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 084/100] rtlwifi: rtl8821ae: remove unused variables Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 085/100] rtlwifi: rtl8192ee: " Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 086/100] rtlwifi: rtl8723ae: " Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 087/100] iwlegacy: ensure loop counter addr does not wrap and cause an infinite loop Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 088/100] mwifiex: Fix possible buffer overflows in mwifiex_ret_wmm_get_status() Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 089/100] mwifiex: Fix possible buffer overflows in mwifiex_cmd_append_vsie_tlv() Sasha Levin
     [not found] ` <20200214162425.21071-1-sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2020-02-14 16:23   ` [PATCH AUTOSEL 4.4 070/100] drm/nouveau: Fix copy-paste error in nouveau_fence_wait_uevent_handler Sasha Levin
2020-02-14 16:23     ` Sasha Levin
2020-02-14 16:23     ` Sasha Levin
2020-02-14 16:24   ` [PATCH AUTOSEL 4.4 090/100] drm/nouveau/disp/nv50-: prevent oops when no channel method map provided Sasha Levin
2020-02-14 16:24     ` Sasha Levin
2020-02-14 16:24     ` Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 091/100] docs: i2c: writing-clients: properly name the stop condition Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 092/100] trigger_next should increase position index Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 093/100] radeon: insert 10ms sleep in dce5_crtc_load_lut Sasha Levin
2020-02-14 16:24   ` Sasha Levin
2020-02-14 16:24   ` Sasha Levin
2020-02-14 16:24 ` [Ocfs2-devel] [PATCH AUTOSEL 4.4 094/100] ocfs2: fix a NULL pointer dereference when call ocfs2_update_inode_fsync_trans() Sasha Levin
2020-02-14 16:24   ` Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 095/100] lib/scatterlist.c: adjust indentation in __sg_alloc_table Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 096/100] reiserfs: prevent NULL pointer dereference in reiserfs_insert_item() Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 097/100] bcache: explicity type cast in bset_bkey_last() Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 098/100] irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALL Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 099/100] microblaze: Prevent the overflow of the start Sasha Levin
2020-02-14 16:24 ` [PATCH AUTOSEL 4.4 100/100] brd: check and limit max_part par Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200214162425.21071-55-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.