From: Shawn Guo <shawnguo@kernel.org>
To: Martin Kepplinger <martin.kepplinger@puri.sm>
Cc: mark.rutland@arm.com, robh@kernel.org, kernel@puri.sm,
Anson.Huang@nxp.com, devicetree@vger.kernel.org,
s.hauer@pengutronix.de,
"Angus Ainslie \(Purism\)" <angus@akkea.ca>,
linux-kernel@vger.kernel.org, linux-imx@nxp.com,
kernel@pengutronix.de, festevam@gmail.com,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v1 10/12] arm64: dts: librem5-devkit: configure VSELECT
Date: Mon, 17 Feb 2020 12:09:43 +0800 [thread overview]
Message-ID: <20200217040942.GG5395@dragon> (raw)
In-Reply-To: <20200205143003.28408-11-martin.kepplinger@puri.sm>
On Wed, Feb 05, 2020 at 03:30:01PM +0100, Martin Kepplinger wrote:
> From: "Angus Ainslie (Purism)" <angus@akkea.ca>
>
> use vselect to set the io voltage to 1.8V
>
> Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
> ---
> arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> index fbc7062c4633..8f920c554ebd 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> @@ -789,6 +789,7 @@
> MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
> MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
> MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
> + MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0xc1
How is the pin working without a pinctrl handle pointing it?
Shawn
> >;
> };
>
> @@ -800,6 +801,7 @@
> MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd
> MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd
> MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd
> + MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0xc1
> >;
> };
>
> @@ -811,6 +813,7 @@
> MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcf
> MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcf
> MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcf
> + MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0xc1
> >;
> };
>
> --
> 2.20.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Martin Kepplinger <martin.kepplinger@puri.sm>
Cc: robh@kernel.org, mark.rutland@arm.com, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
Anson.Huang@nxp.com, devicetree@vger.kernel.org, kernel@puri.sm,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
"Angus Ainslie (Purism)" <angus@akkea.ca>
Subject: Re: [PATCH v1 10/12] arm64: dts: librem5-devkit: configure VSELECT
Date: Mon, 17 Feb 2020 12:09:43 +0800 [thread overview]
Message-ID: <20200217040942.GG5395@dragon> (raw)
In-Reply-To: <20200205143003.28408-11-martin.kepplinger@puri.sm>
On Wed, Feb 05, 2020 at 03:30:01PM +0100, Martin Kepplinger wrote:
> From: "Angus Ainslie (Purism)" <angus@akkea.ca>
>
> use vselect to set the io voltage to 1.8V
>
> Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
> ---
> arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> index fbc7062c4633..8f920c554ebd 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> @@ -789,6 +789,7 @@
> MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
> MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
> MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
> + MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0xc1
How is the pin working without a pinctrl handle pointing it?
Shawn
> >;
> };
>
> @@ -800,6 +801,7 @@
> MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd
> MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd
> MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd
> + MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0xc1
> >;
> };
>
> @@ -811,6 +813,7 @@
> MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcf
> MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcf
> MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcf
> + MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0xc1
> >;
> };
>
> --
> 2.20.1
>
next prev parent reply other threads:[~2020-02-17 4:10 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-05 14:29 [PATCH v1 00/12] arm64: dts: librem5-devkit: description updates Martin Kepplinger
2020-02-05 14:29 ` Martin Kepplinger
2020-02-05 14:29 ` [PATCH v1 01/12] arm64: dts: librem5-devkit: add sai2 and sai6 pinctrl definitions Martin Kepplinger
2020-02-05 14:29 ` Martin Kepplinger
2020-02-17 3:54 ` Shawn Guo
2020-02-17 3:54 ` Shawn Guo
2020-02-05 14:29 ` [PATCH v1 02/12] arm64: dts: librem5-devkit: add the simcom 7100 modem and audio Martin Kepplinger
2020-02-05 14:29 ` Martin Kepplinger
2020-02-17 3:59 ` Shawn Guo
2020-02-17 3:59 ` Shawn Guo
2020-02-05 14:29 ` [PATCH v1 03/12] arm64: dts: librem5-devkit: allow modem to wake the system from suspend Martin Kepplinger
2020-02-05 14:29 ` Martin Kepplinger
2020-02-17 4:02 ` Shawn Guo
2020-02-17 4:02 ` Shawn Guo
2020-02-05 14:29 ` [PATCH v1 04/12] arm64: dts: librem5-devkit: enable sai2 audio interface Martin Kepplinger
2020-02-05 14:29 ` Martin Kepplinger
2020-02-05 14:29 ` [PATCH v1 05/12] arm64: dts: librem5-devkit: add the sgtl5000 i2c audio codec Martin Kepplinger
2020-02-05 14:29 ` Martin Kepplinger
2020-02-17 4:05 ` Shawn Guo
2020-02-17 4:05 ` Shawn Guo
2020-02-05 14:29 ` [PATCH v1 06/12] arm64: dts: librem5-devkit: add a vbus supply to usb0 Martin Kepplinger
2020-02-05 14:29 ` Martin Kepplinger
2020-02-05 14:29 ` [PATCH v1 07/12] arm64: dts: librem5-devkit: add the regulators for DVFS Martin Kepplinger
2020-02-05 14:29 ` Martin Kepplinger
2020-02-17 4:08 ` Shawn Guo
2020-02-17 4:08 ` Shawn Guo
2020-02-05 14:29 ` [PATCH v1 08/12] arm64: dts: librem5-devkit: add a battery for the bq25896 to monitor Martin Kepplinger
2020-02-05 14:29 ` Martin Kepplinger
2020-02-05 14:30 ` [PATCH v1 09/12] arm64: dts: librem5-devkit: allow the redpine card to be removed Martin Kepplinger
2020-02-05 14:30 ` Martin Kepplinger
2020-02-05 14:30 ` [PATCH v1 10/12] arm64: dts: librem5-devkit: configure VSELECT Martin Kepplinger
2020-02-05 14:30 ` Martin Kepplinger
2020-02-17 4:09 ` Shawn Guo [this message]
2020-02-17 4:09 ` Shawn Guo
2020-02-05 14:30 ` [PATCH v1 11/12] arm64: dts: librem5-devkit: increase the VBUS current in the kernel Martin Kepplinger
2020-02-05 14:30 ` Martin Kepplinger
2020-02-05 14:30 ` [PATCH v1 12/12] arm64: dts: librem5-devkit: add lsm9ds1 mount matrix Martin Kepplinger
2020-02-05 14:30 ` Martin Kepplinger
2020-02-13 14:08 ` [PATCH v1 00/12] arm64: dts: librem5-devkit: description updates Martin Kepplinger
2020-02-13 14:08 ` Martin Kepplinger
2020-02-14 18:44 ` Guido Günther
2020-02-14 18:44 ` Guido Günther
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200217040942.GG5395@dragon \
--to=shawnguo@kernel.org \
--cc=Anson.Huang@nxp.com \
--cc=angus@akkea.ca \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=kernel@puri.sm \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=martin.kepplinger@puri.sm \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.