am437x-evm zeus image

am437x-evm zeus image

[Daniel Ammann]

Hi all

I'm trying to build a zeus image for am437x-evm. How do I go about that? Is
meta-ti branch zeus ready yet?

First, I tried a simple poky build with meta-openembedded and meta-ti, building
core-image-base. But compiling of ti-sgx-ddk-km fails.

Then I followed the instructions in the arago wiki [1], but the build fails
with qtbase because qtbase doesn't run configure successfully.

What is the recommended way to compile a development image? The goal is to compile
a qt5 application with qtwebengine that needs eglfs support.

[1] http://arago-project.org/wiki/index.php/Setting_Up_Build_Environment

Thanks and kind regards

Daniel


-- 
bytes at work
Technoparkstrasse 7
CH-8406 Winterthur
Switzerland

phone: +41 52 550 50 67

Re: [meta-ti] am437x-evm zeus image

[Denys Dmytriyenko]

Daniel,

You are not providing any useful info, such as error messages or logs.

In general, yes, am437x-evm on Zeus is ready and has been building fine in 
many different configurations.

Denys


On Wed, Feb 19, 2020 at 11:27:55AM +0100, Daniel Ammann wrote:
> Hi all
> 
> I'm trying to build a zeus image for am437x-evm. How do I go about that? Is
> meta-ti branch zeus ready yet?
> 
> First, I tried a simple poky build with meta-openembedded and meta-ti, building
> core-image-base. But compiling of ti-sgx-ddk-km fails.
> 
> Then I followed the instructions in the arago wiki [1], but the build fails
> with qtbase because qtbase doesn't run configure successfully.
> 
> What is the recommended way to compile a development image? The goal is to compile
> a qt5 application with qtwebengine that needs eglfs support.
> 
> [1] http://arago-project.org/wiki/index.php/Setting_Up_Build_Environment
> 
> Thanks and kind regards
> 
> Daniel

Re: [meta-ti] am437x-evm zeus image

[Daniel Ammann]

Hi Denys

Thanks for the answer.

My build configuration looks like this:

Build Configuration:
BB_VERSION           = "1.44.0"
BUILD_SYS            = "x86_64-linux"
NATIVELSBSTRING      = "universal"
TARGET_SYS           = "arm-poky-linux-gnueabi"
MACHINE              = "am437x-evm"
DISTRO               = "poky"
DISTRO_VERSION       = "3.0.2"
TUNE_FEATURES        = "arm armv7a vfp thumb neon callconvention-hard"
TARGET_FPU           = "hard"
meta
meta-poky
meta-yocto-bsp       = "zeus:5e1f52edb7a9f790fb6cb5d96502f3690267c1b1"
meta-oe
meta-networking
meta-python          = "zeus:bb65c27a772723dfe2c15b5e1b27bcc1a1ed884c"
meta-ti              = "zeus:19a73c96bd05a74711a36a61077e8a7b88b55c63"

See below for the error messgage.

Thanks and kind regards

Daniel


ERROR: ti-sgx-ddk-km-1.17.4948957-r3v do_compile: oe_runmake failed
ERROR: ti-sgx-ddk-km-1.17.4948957-r3v do_compile: Execution of '/home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work/am437x_evm-poky-linux-gnueabi/ti-sgx-ddk-km/1.17.4948957-r3v/temp/run.do_compile.19460' failed with exit code 1:
grep: /home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work-shared/am437x-evm/kernel-source/include/linux/amba: Is a directory
grep: /home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work-shared/am437x-evm/kernel-source/include/linux/avf: Is a directory
grep: /home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work-shared/am437x-evm/kernel-source/include/linux/bcma: Is a directory
.
.
.
grep: /home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work-shared/am437x-evm/kernel-source/include/linux/unaligned: Is a directory
grep: /home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work-shared/am437x-evm/kernel-source/include/linux/usb: Is a directory
grep: /home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work-shared/am437x-evm/kernel-source/include/linux/wimax: Is a directory
../config/compiler.mk:96: host gcc
../config/compiler.mk:185: target arm-poky-linux-gnueabi-gcc  -mno-thumb-interwork -marm -fuse-ld=bfd -fmacro-prefix-map=/home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work/am437x_evm-poky-linux-gnueabi/ti-sgx-ddk-km/1.17.4948957-r3v=/usr/src/debug/ti-sgx-ddk-km/1.17.4948957-r3v                      -fdebug-prefix-map=/home/daniel/workspace/reference/am335x-evm-poky
/build/tmp/work/am437x_evm-poky-linux-gnueabi/ti-sgx-ddk-km/1.17.4948957-r3v=/usr/src/debug/ti-sgx-ddk-km/1.17.4948957-r3v                      -fdebug-prefix-map=/home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work/am437x_evm-poky-linux-gnueabi/ti-sgx-ddk-km/1.17.4948957-r3v/recipe-sysroot=                      -fdebug-prefix-map=/home/daniel/workspace/reference/am3
35x-evm-poky/build/tmp/work/am437x_evm-poky-linux-gnueabi/ti-sgx-ddk-km/1.17.4948957-r3v/recipe-sysroot-native=  -fdebug-prefix-map=/home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work-shared/am437x-evm/kernel-source=/usr/src/kernel
******* Multiarch build: no
******* Primary arch:    target_armel
******* Secondary arch:  none
../config/core.mk:513: $(KERNELDIR)/vmlinux does not exist. Kbuild may fail.
eurasiacon/build/linux2/toplevel.mk:230: eurasiacon/build/linux2/moduledefs/target_armel.mk: No such file or directory
make[1]: *** No rule to make target 'eurasiacon/build/linux2/moduledefs/target_armel.mk'.  Stop.
make: *** [../config/core.mk:789: build] Error 2
WARNING: exit code 1 from a shell command.

ERROR: Logfile of failure stored in: /home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work/am437x_evm-poky-linux-gnueabi/ti-sgx-ddk-km/1.17.4948957-r3v/temp/log.do_compile.19460



On 2/19/20 8:00 PM, Denys Dmytriyenko wrote:
> Daniel,
> 
> You are not providing any useful info, such as error messages or logs.
> 
> In general, yes, am437x-evm on Zeus is ready and has been building fine in
> many different configurations.
> 
> Denys
> 
> 
> On Wed, Feb 19, 2020 at 11:27:55AM +0100, Daniel Ammann wrote:
>> Hi all
>>
>> I'm trying to build a zeus image for am437x-evm. How do I go about that? Is
>> meta-ti branch zeus ready yet?
>>
>> First, I tried a simple poky build with meta-openembedded and meta-ti, building
>> core-image-base. But compiling of ti-sgx-ddk-km fails.
>>
>> Then I followed the instructions in the arago wiki [1], but the build fails
>> with qtbase because qtbase doesn't run configure successfully.
>>
>> What is the recommended way to compile a development image? The goal is to compile
>> a qt5 application with qtwebengine that needs eglfs support.
>>
>> [1] http://arago-project.org/wiki/index.php/Setting_Up_Build_Environment
>>
>> Thanks and kind regards
>>
>> Daniel

-- 
bytes at work
Technoparkstrasse 7
CH-8406 Winterthur
Switzerland

phone: +41 52 550 50 67

Re: [meta-ti] am437x-evm zeus image

[Denys Dmytriyenko]

On Thu, Feb 20, 2020 at 11:21:46AM +0100, Daniel Ammann wrote:
> Hi Denys
> 
> Thanks for the answer.
> 
> My build configuration looks like this:
> 
> Build Configuration:
> BB_VERSION           = "1.44.0"
> BUILD_SYS            = "x86_64-linux"
> NATIVELSBSTRING      = "universal"
> TARGET_SYS           = "arm-poky-linux-gnueabi"

Ah, "poky" toolchain, which doesn't use "gnueabihf" suffix... Probably need 
the same hack as for the generic "oe" toolchain - I'll take a look.


> MACHINE              = "am437x-evm"
> DISTRO               = "poky"
> DISTRO_VERSION       = "3.0.2"
> TUNE_FEATURES        = "arm armv7a vfp thumb neon callconvention-hard"
> TARGET_FPU           = "hard"
> meta
> meta-poky
> meta-yocto-bsp       = "zeus:5e1f52edb7a9f790fb6cb5d96502f3690267c1b1"
> meta-oe
> meta-networking
> meta-python          = "zeus:bb65c27a772723dfe2c15b5e1b27bcc1a1ed884c"
> meta-ti              = "zeus:19a73c96bd05a74711a36a61077e8a7b88b55c63"
> 
> See below for the error messgage.
> 
> Thanks and kind regards
> 
> Daniel
> 
> 
> ERROR: ti-sgx-ddk-km-1.17.4948957-r3v do_compile: oe_runmake failed
> ERROR: ti-sgx-ddk-km-1.17.4948957-r3v do_compile: Execution of '/home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work/am437x_evm-poky-linux-gnueabi/ti-sgx-ddk-km/1.17.4948957-r3v/temp/run.do_compile.19460' failed with exit code 1:
> grep: /home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work-shared/am437x-evm/kernel-source/include/linux/amba: Is a directory
> grep: /home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work-shared/am437x-evm/kernel-source/include/linux/avf: Is a directory
> grep: /home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work-shared/am437x-evm/kernel-source/include/linux/bcma: Is a directory
> .
> .
> .
> grep: /home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work-shared/am437x-evm/kernel-source/include/linux/unaligned: Is a directory
> grep: /home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work-shared/am437x-evm/kernel-source/include/linux/usb: Is a directory
> grep: /home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work-shared/am437x-evm/kernel-source/include/linux/wimax: Is a directory
> ../config/compiler.mk:96: host gcc
> ../config/compiler.mk:185: target arm-poky-linux-gnueabi-gcc  -mno-thumb-interwork -marm -fuse-ld=bfd -fmacro-prefix-map=/home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work/am437x_evm-poky-linux-gnueabi/ti-sgx-ddk-km/1.17.4948957-r3v=/usr/src/debug/ti-sgx-ddk-km/1.17.4948957-r3v                      -fdebug-prefix-map=/home/daniel/workspace/reference/am335x-evm-poky
> /build/tmp/work/am437x_evm-poky-linux-gnueabi/ti-sgx-ddk-km/1.17.4948957-r3v=/usr/src/debug/ti-sgx-ddk-km/1.17.4948957-r3v                      -fdebug-prefix-map=/home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work/am437x_evm-poky-linux-gnueabi/ti-sgx-ddk-km/1.17.4948957-r3v/recipe-sysroot=                      -fdebug-prefix-map=/home/daniel/workspace/reference/am3
> 35x-evm-poky/build/tmp/work/am437x_evm-poky-linux-gnueabi/ti-sgx-ddk-km/1.17.4948957-r3v/recipe-sysroot-native=  -fdebug-prefix-map=/home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work-shared/am437x-evm/kernel-source=/usr/src/kernel
> ******* Multiarch build: no
> ******* Primary arch:    target_armel
> ******* Secondary arch:  none
> ../config/core.mk:513: $(KERNELDIR)/vmlinux does not exist. Kbuild may fail.
> eurasiacon/build/linux2/toplevel.mk:230: eurasiacon/build/linux2/moduledefs/target_armel.mk: No such file or directory
> make[1]: *** No rule to make target 'eurasiacon/build/linux2/moduledefs/target_armel.mk'.  Stop.
> make: *** [../config/core.mk:789: build] Error 2
> WARNING: exit code 1 from a shell command.
> 
> ERROR: Logfile of failure stored in: /home/daniel/workspace/reference/am335x-evm-poky/build/tmp/work/am437x_evm-poky-linux-gnueabi/ti-sgx-ddk-km/1.17.4948957-r3v/temp/log.do_compile.19460
> 
> 
> 
> On 2/19/20 8:00 PM, Denys Dmytriyenko wrote:
> >Daniel,
> >
> >You are not providing any useful info, such as error messages or logs.
> >
> >In general, yes, am437x-evm on Zeus is ready and has been building fine in
> >many different configurations.
> >
> >Denys
> >
> >
> >On Wed, Feb 19, 2020 at 11:27:55AM +0100, Daniel Ammann wrote:
> >>Hi all
> >>
> >>I'm trying to build a zeus image for am437x-evm. How do I go about that? Is
> >>meta-ti branch zeus ready yet?
> >>
> >>First, I tried a simple poky build with meta-openembedded and meta-ti, building
> >>core-image-base. But compiling of ti-sgx-ddk-km fails.
> >>
> >>Then I followed the instructions in the arago wiki [1], but the build fails
> >>with qtbase because qtbase doesn't run configure successfully.
> >>
> >>What is the recommended way to compile a development image? The goal is to compile
> >>a qt5 application with qtwebengine that needs eglfs support.
> >>
> >>[1] http://arago-project.org/wiki/index.php/Setting_Up_Build_Environment
> >>
> >>Thanks and kind regards
> >>
> >>Daniel
> 
> -- 
> bytes at work
> Technoparkstrasse 7
> CH-8406 Winterthur
> Switzerland
> 
> phone: +41 52 550 50 67