All of lore.kernel.org
 help / color / mirror / Atom feed
From: Russell King - ARM Linux admin <linux@armlinux.org.uk>
To: Andre Przywara <andre.przywara@arm.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	netdev@vger.kernel.org,
	Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>,
	Michal Simek <michal.simek@xilinx.com>,
	"David S. Miller" <davem@davemloft.net>,
	linux-arm-kernel@lists.infradead.org,
	Heiner Kallweit <hkallweit1@gmail.com>
Subject: Re: [CFT 4/8] net: axienet: use resolved link config in mac_link_up()
Date: Thu, 20 Feb 2020 10:29:27 +0000	[thread overview]
Message-ID: <20200220102927.GX25745@shell.armlinux.org.uk> (raw)
In-Reply-To: <E1j3k7t-00072J-RS@rmk-PC.armlinux.org.uk>

Hi Andre,

Are you able to give this (along with patch 1) some testing please?
The series can be grabbed from:

  https://patchwork.ozlabs.org/series/159037/mbox/

Strangely, google doesn't find it in the lore.kernel.org archives,
but does in spinics.net archives and patchwork...

On Mon, Feb 17, 2020 at 05:24:09PM +0000, Russell King wrote:
> Convert the Xilinx AXI ethernet driver to use the finalised link
> parameters in mac_link_up() rather than the parameters in mac_config().
> 
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> ---
>  .../net/ethernet/xilinx/xilinx_axienet_main.c | 38 +++++++++----------
>  1 file changed, 19 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> index 197740781157..c2f4c5ca2e80 100644
> --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> @@ -1440,6 +1440,22 @@ static void axienet_mac_an_restart(struct phylink_config *config)
>  
>  static void axienet_mac_config(struct phylink_config *config, unsigned int mode,
>  			       const struct phylink_link_state *state)
> +{
> +	/* nothing meaningful to do */
> +}
> +
> +static void axienet_mac_link_down(struct phylink_config *config,
> +				  unsigned int mode,
> +				  phy_interface_t interface)
> +{
> +	/* nothing meaningful to do */
> +}
> +
> +static void axienet_mac_link_up(struct phylink_config *config,
> +				struct phy_device *phy,
> +				unsigned int mode, phy_interface_t interface,
> +				int speed, int duplex,
> +				bool tx_pause, bool rx_pause)
>  {
>  	struct net_device *ndev = to_net_dev(config->dev);
>  	struct axienet_local *lp = netdev_priv(ndev);
> @@ -1448,7 +1464,7 @@ static void axienet_mac_config(struct phylink_config *config, unsigned int mode,
>  	emmc_reg = axienet_ior(lp, XAE_EMMC_OFFSET);
>  	emmc_reg &= ~XAE_EMMC_LINKSPEED_MASK;
>  
> -	switch (state->speed) {
> +	switch (speed) {
>  	case SPEED_1000:
>  		emmc_reg |= XAE_EMMC_LINKSPD_1000;
>  		break;
> @@ -1467,33 +1483,17 @@ static void axienet_mac_config(struct phylink_config *config, unsigned int mode,
>  	axienet_iow(lp, XAE_EMMC_OFFSET, emmc_reg);
>  
>  	fcc_reg = axienet_ior(lp, XAE_FCC_OFFSET);
> -	if (state->pause & MLO_PAUSE_TX)
> +	if (tx_pause)
>  		fcc_reg |= XAE_FCC_FCTX_MASK;
>  	else
>  		fcc_reg &= ~XAE_FCC_FCTX_MASK;
> -	if (state->pause & MLO_PAUSE_RX)
> +	if (rx_pause)
>  		fcc_reg |= XAE_FCC_FCRX_MASK;
>  	else
>  		fcc_reg &= ~XAE_FCC_FCRX_MASK;
>  	axienet_iow(lp, XAE_FCC_OFFSET, fcc_reg);
>  }
>  
> -static void axienet_mac_link_down(struct phylink_config *config,
> -				  unsigned int mode,
> -				  phy_interface_t interface)
> -{
> -	/* nothing meaningful to do */
> -}
> -
> -static void axienet_mac_link_up(struct phylink_config *config,
> -				struct phy_device *phy,
> -				unsigned int mode, phy_interface_t interface,
> -				int speed, int duplex,
> -				bool tx_pause, bool rx_pause)
> -{
> -	/* nothing meaningful to do */
> -}
> -
>  static const struct phylink_mac_ops axienet_phylink_ops = {
>  	.validate = axienet_validate,
>  	.mac_pcs_get_state = axienet_mac_pcs_get_state,
> -- 
> 2.20.1
> 
> 

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Russell King - ARM Linux admin <linux@armlinux.org.uk>
To: Andre Przywara <andre.przywara@arm.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	netdev@vger.kernel.org,
	Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>,
	Michal Simek <michal.simek@xilinx.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [CFT 4/8] net: axienet: use resolved link config in mac_link_up()
Date: Thu, 20 Feb 2020 10:29:27 +0000	[thread overview]
Message-ID: <20200220102927.GX25745@shell.armlinux.org.uk> (raw)
In-Reply-To: <E1j3k7t-00072J-RS@rmk-PC.armlinux.org.uk>

Hi Andre,

Are you able to give this (along with patch 1) some testing please?
The series can be grabbed from:

  https://patchwork.ozlabs.org/series/159037/mbox/

Strangely, google doesn't find it in the lore.kernel.org archives,
but does in spinics.net archives and patchwork...

On Mon, Feb 17, 2020 at 05:24:09PM +0000, Russell King wrote:
> Convert the Xilinx AXI ethernet driver to use the finalised link
> parameters in mac_link_up() rather than the parameters in mac_config().
> 
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> ---
>  .../net/ethernet/xilinx/xilinx_axienet_main.c | 38 +++++++++----------
>  1 file changed, 19 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> index 197740781157..c2f4c5ca2e80 100644
> --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> @@ -1440,6 +1440,22 @@ static void axienet_mac_an_restart(struct phylink_config *config)
>  
>  static void axienet_mac_config(struct phylink_config *config, unsigned int mode,
>  			       const struct phylink_link_state *state)
> +{
> +	/* nothing meaningful to do */
> +}
> +
> +static void axienet_mac_link_down(struct phylink_config *config,
> +				  unsigned int mode,
> +				  phy_interface_t interface)
> +{
> +	/* nothing meaningful to do */
> +}
> +
> +static void axienet_mac_link_up(struct phylink_config *config,
> +				struct phy_device *phy,
> +				unsigned int mode, phy_interface_t interface,
> +				int speed, int duplex,
> +				bool tx_pause, bool rx_pause)
>  {
>  	struct net_device *ndev = to_net_dev(config->dev);
>  	struct axienet_local *lp = netdev_priv(ndev);
> @@ -1448,7 +1464,7 @@ static void axienet_mac_config(struct phylink_config *config, unsigned int mode,
>  	emmc_reg = axienet_ior(lp, XAE_EMMC_OFFSET);
>  	emmc_reg &= ~XAE_EMMC_LINKSPEED_MASK;
>  
> -	switch (state->speed) {
> +	switch (speed) {
>  	case SPEED_1000:
>  		emmc_reg |= XAE_EMMC_LINKSPD_1000;
>  		break;
> @@ -1467,33 +1483,17 @@ static void axienet_mac_config(struct phylink_config *config, unsigned int mode,
>  	axienet_iow(lp, XAE_EMMC_OFFSET, emmc_reg);
>  
>  	fcc_reg = axienet_ior(lp, XAE_FCC_OFFSET);
> -	if (state->pause & MLO_PAUSE_TX)
> +	if (tx_pause)
>  		fcc_reg |= XAE_FCC_FCTX_MASK;
>  	else
>  		fcc_reg &= ~XAE_FCC_FCTX_MASK;
> -	if (state->pause & MLO_PAUSE_RX)
> +	if (rx_pause)
>  		fcc_reg |= XAE_FCC_FCRX_MASK;
>  	else
>  		fcc_reg &= ~XAE_FCC_FCRX_MASK;
>  	axienet_iow(lp, XAE_FCC_OFFSET, fcc_reg);
>  }
>  
> -static void axienet_mac_link_down(struct phylink_config *config,
> -				  unsigned int mode,
> -				  phy_interface_t interface)
> -{
> -	/* nothing meaningful to do */
> -}
> -
> -static void axienet_mac_link_up(struct phylink_config *config,
> -				struct phy_device *phy,
> -				unsigned int mode, phy_interface_t interface,
> -				int speed, int duplex,
> -				bool tx_pause, bool rx_pause)
> -{
> -	/* nothing meaningful to do */
> -}
> -
>  static const struct phylink_mac_ops axienet_phylink_ops = {
>  	.validate = axienet_validate,
>  	.mac_pcs_get_state = axienet_mac_pcs_get_state,
> -- 
> 2.20.1
> 
> 

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up

  reply	other threads:[~2020-02-20 10:31 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-17 17:22 [CFT 0/8] rework phylink interface for split MAC/PCS support Russell King - ARM Linux admin
2020-02-17 17:22 ` Russell King - ARM Linux admin
2020-02-17 17:22 ` Russell King - ARM Linux admin
2020-02-17 17:23 ` [CFT 1/8] net: phylink: propagate resolved link config via mac_link_up() Russell King
2020-02-17 17:23   ` Russell King
2020-02-17 18:03   ` Matthew Wilcox
2020-02-17 18:03     ` Matthew Wilcox
2020-02-17 18:03     ` Matthew Wilcox
2020-02-17 18:48     ` Russell King - ARM Linux admin
2020-02-17 18:48       ` Russell King - ARM Linux admin
2020-02-17 18:48       ` Russell King - ARM Linux admin
2020-02-17 21:54   ` Florian Fainelli
2020-02-17 21:54     ` Florian Fainelli
2020-02-17 21:54     ` Florian Fainelli
2020-02-18  1:53     ` Russell King - ARM Linux admin
2020-02-18  1:53       ` Russell King - ARM Linux admin
2020-02-18  1:53       ` Russell King - ARM Linux admin
2020-02-17 17:23 ` [CFT 2/8] net: dsa: " Russell King
2020-02-17 17:23   ` Russell King
2020-02-17 17:24 ` [CFT 3/8] net: mv88e6xxx: use resolved link config in mac_link_up() Russell King
2020-02-17 17:24 ` [CFT 4/8] net: axienet: " Russell King
2020-02-20 10:29   ` Russell King - ARM Linux admin [this message]
2020-02-20 10:29     ` Russell King - ARM Linux admin
2020-02-24 12:24   ` Andre Przywara
2020-02-24 12:24     ` Andre Przywara
2020-02-24 13:01     ` Russell King - ARM Linux admin
2020-02-24 13:01       ` Russell King - ARM Linux admin
2020-02-17 17:24 ` [CFT 5/8] net: dpaa2-mac: " Russell King
2020-02-18 10:34   ` Russell King - ARM Linux admin
2020-02-18 10:42     ` Ioana Ciornei
2020-02-20 10:20       ` Russell King - ARM Linux admin
2020-02-17 17:24 ` [CFT 6/8] net: macb: " Russell King
2020-02-19 14:30   ` Alexandre Belloni
2020-02-20 10:18     ` Russell King - ARM Linux admin
2020-02-20 12:38       ` Andrew Lunn
2020-02-20 12:44         ` Russell King - ARM Linux admin
2020-02-21 20:25         ` Russell King - ARM Linux admin
2020-02-24 13:15       ` Russell King - ARM Linux admin
2020-02-24 14:37         ` Alexandre Belloni
2020-02-17 17:24 ` [CFT 7/8] net: mvneta: " Russell King
2020-02-17 17:24 ` [CFT 8/8] net: mvpp2: " Russell King
2020-02-17 17:33 ` [CFT 0/8] rework phylink interface for split MAC/PCS support Andrew Lunn
2020-02-17 17:33   ` Andrew Lunn
2020-02-17 17:33   ` Andrew Lunn
2020-02-17 18:51   ` Russell King - ARM Linux admin
2020-02-17 18:51     ` Russell King - ARM Linux admin
2020-02-17 18:51     ` Russell King - ARM Linux admin
2020-02-18 10:29     ` Russell King - ARM Linux admin
2020-02-18 10:29       ` Russell King - ARM Linux admin
2020-02-18 10:29       ` Russell King - ARM Linux admin
2020-06-21 14:33 ` Russell King - ARM Linux admin
2020-06-21 19:37   ` Vladimir Oltean
2020-06-21 20:02     ` Russell King - ARM Linux admin
2020-06-21 21:17       ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200220102927.GX25745@shell.armlinux.org.uk \
    --to=linux@armlinux.org.uk \
    --cc=andre.przywara@arm.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=michal.simek@xilinx.com \
    --cc=netdev@vger.kernel.org \
    --cc=radhey.shyam.pandey@xilinx.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.