All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: "Andrew F . Davis" <afd@ti.com>,
	"Dave Gerlach" <d-gerlach@ti.com>,
	"Faiz Abbas" <faiz_abbas@ti.com>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	Keerthy <j-keerthy@ti.com>, "Nishanth Menon" <nm@ti.com>,
	"Peter Ujfalusi" <peter.ujfalusi@ti.com>,
	"Roger Quadros" <rogerq@ti.com>, "Suman Anna" <s-anna@ti.com>,
	"Tero Kristo" <t-kristo@ti.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	"Adam Ford" <aford173@gmail.com>,
	"André Hentschel" <nerv@dawncrow.de>,
	"H. Nikolaus Schaller" <hns@goldelico.com>
Subject: [PATCH 1/7] bus: ti-sysc: Fix 1-wire reset quirk
Date: Fri, 21 Feb 2020 11:52:50 -0800	[thread overview]
Message-ID: <20200221195256.54016-2-tony@atomide.com> (raw)
In-Reply-To: <20200221195256.54016-1-tony@atomide.com>

Because of the i2c quirk we have the reset quirks named in a confusing
way. Let's fix the 1-wire quirk accordinlyg. Then let's switch to using
better naming later on.

Fixes: 4e23be473e30 ("bus: ti-sysc: Add support for module specific reset quirks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/bus/ti-sysc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1400,7 +1400,7 @@ static void sysc_init_revision_quirks(struct sysc *ddata)
 }
 
 /* 1-wire needs module's internal clocks enabled for reset */
-static void sysc_clk_enable_quirk_hdq1w(struct sysc *ddata)
+static void sysc_pre_reset_quirk_hdq1w(struct sysc *ddata)
 {
 	int offset = 0x0c;	/* HDQ_CTRL_STATUS */
 	u16 val;
@@ -1488,7 +1488,7 @@ static void sysc_init_module_quirks(struct sysc *ddata)
 		return;
 
 	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_HDQ1W) {
-		ddata->clk_enable_quirk = sysc_clk_enable_quirk_hdq1w;
+		ddata->clk_disable_quirk = sysc_pre_reset_quirk_hdq1w;
 
 		return;
 	}
-- 
2.25.1

WARNING: multiple messages have this Message-ID (diff)
From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: "Nishanth Menon" <nm@ti.com>, "Tero Kristo" <t-kristo@ti.com>,
	"Dave Gerlach" <d-gerlach@ti.com>, Keerthy <j-keerthy@ti.com>,
	"H. Nikolaus Schaller" <hns@goldelico.com>,
	linux-kernel@vger.kernel.org,
	"André Hentschel" <nerv@dawncrow.de>,
	"Andrew F . Davis" <afd@ti.com>,
	"Peter Ujfalusi" <peter.ujfalusi@ti.com>,
	"Faiz Abbas" <faiz_abbas@ti.com>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Suman Anna" <s-anna@ti.com>, "Adam Ford" <aford173@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	"Roger Quadros" <rogerq@ti.com>
Subject: [PATCH 1/7] bus: ti-sysc: Fix 1-wire reset quirk
Date: Fri, 21 Feb 2020 11:52:50 -0800	[thread overview]
Message-ID: <20200221195256.54016-2-tony@atomide.com> (raw)
In-Reply-To: <20200221195256.54016-1-tony@atomide.com>

Because of the i2c quirk we have the reset quirks named in a confusing
way. Let's fix the 1-wire quirk accordinlyg. Then let's switch to using
better naming later on.

Fixes: 4e23be473e30 ("bus: ti-sysc: Add support for module specific reset quirks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/bus/ti-sysc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1400,7 +1400,7 @@ static void sysc_init_revision_quirks(struct sysc *ddata)
 }
 
 /* 1-wire needs module's internal clocks enabled for reset */
-static void sysc_clk_enable_quirk_hdq1w(struct sysc *ddata)
+static void sysc_pre_reset_quirk_hdq1w(struct sysc *ddata)
 {
 	int offset = 0x0c;	/* HDQ_CTRL_STATUS */
 	u16 val;
@@ -1488,7 +1488,7 @@ static void sysc_init_module_quirks(struct sysc *ddata)
 		return;
 
 	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_HDQ1W) {
-		ddata->clk_enable_quirk = sysc_clk_enable_quirk_hdq1w;
+		ddata->clk_disable_quirk = sysc_pre_reset_quirk_hdq1w;
 
 		return;
 	}
-- 
2.25.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-02-21 19:53 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-21 19:52 [PATCH 0/7] ti-sysc driver fix for hdq1w and few improvments Tony Lindgren
2020-02-21 19:52 ` Tony Lindgren
2020-02-21 19:52 ` Tony Lindgren [this message]
2020-02-21 19:52   ` [PATCH 1/7] bus: ti-sysc: Fix 1-wire reset quirk Tony Lindgren
2020-02-21 19:52 ` [PATCH 2/7] bus: ti-sysc: Rename clk related quirks to pre_reset and post_reset quirks Tony Lindgren
2020-02-21 19:52   ` Tony Lindgren
2020-02-21 19:52 ` [PATCH 3/7] ti-sysc: Improve reset to work with modules with no sysconfig Tony Lindgren
2020-02-21 19:52   ` Tony Lindgren
2020-02-21 19:52 ` [PATCH 4/7] bus: ti-sysc: Consider non-existing registers too when matching quirks Tony Lindgren
2020-02-21 19:52   ` Tony Lindgren
2020-02-21 19:52 ` [PATCH 5/7] bus: ti-sysc: Don't warn about legacy property for nested ti-sysc devices Tony Lindgren
2020-02-21 19:52   ` Tony Lindgren
2020-02-21 19:52 ` [PATCH 6/7] bus: ti-sysc: Implement SoC revision handling Tony Lindgren
2020-02-21 19:52   ` Tony Lindgren
2022-03-02 14:38   ` Adam Ford
2022-03-02 14:38     ` Adam Ford
2022-03-04  6:56     ` Tony Lindgren
2022-03-04  6:56       ` Tony Lindgren
2022-03-04 13:57       ` Adam Ford
2022-03-04 13:57         ` Adam Ford
2020-02-21 19:52 ` [PATCH 7/7] bus: ti-sysc: Handle module unlock quirk needed for some RTC Tony Lindgren
2020-02-21 19:52   ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200221195256.54016-2-tony@atomide.com \
    --to=tony@atomide.com \
    --cc=afd@ti.com \
    --cc=aford173@gmail.com \
    --cc=d-gerlach@ti.com \
    --cc=faiz_abbas@ti.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hns@goldelico.com \
    --cc=j-keerthy@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=nerv@dawncrow.de \
    --cc=nm@ti.com \
    --cc=peter.ujfalusi@ti.com \
    --cc=rogerq@ti.com \
    --cc=s-anna@ti.com \
    --cc=t-kristo@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.