All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Heiner Kallweit <hkallweit1@gmail.com>
Cc: alsa-devel@alsa-project.org,
	Realtek linux nic maintainers <nic_swsd@realtek.com>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	Clemens Ladisch <clemens@ladisch.de>,
	Takashi Iwai <tiwai@suse.com>,
	Stephen Hemminger <stephen@networkplumber.org>,
	"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	David Miller <davem@davemloft.net>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Mirko Lindner <mlindner@marvell.com>
Subject: Re: [PATCH v3 0/8] PCI: add and use constant PCI_STATUS_ERROR_BITS and helper pci_status_get_and_clear_errors
Date: Tue, 25 Feb 2020 14:57:55 -0600	[thread overview]
Message-ID: <20200225205755.GA199380@google.com> (raw)
In-Reply-To: <20ca7c1f-7530-2d89-40a6-d97a65aa25ef@gmail.com>

On Tue, Feb 25, 2020 at 03:03:05PM +0100, Heiner Kallweit wrote:
> Few drivers have own definitions for this constant, so move it to the
> PCI core. In addition there are several places where the following
> code sequence is used:
> 1. Read PCI_STATUS
> 2. Mask out non-error bits
> 3. Action based on set error bits
> 4. Write back set error bits to clear them
> 
> As this is a repeated pattern, add a helper to the PCI core.
> 
> Most affected drivers are network drivers. But as it's about core
> PCI functionality, I suppose the series should go through the PCI
> tree.

Makes good sense to me, thanks for doing this.

> v2:
> - fix formal issue with cover letter
> v3:
> - fix dumb typo in patch 7
> 
> Heiner Kallweit (8):
>   PCI: add constant PCI_STATUS_ERROR_BITS
>   PCI: add pci_status_get_and_clear_errors
>   r8169: use pci_status_get_and_clear_errors
>   net: cassini: use pci_status_get_and_clear_errors
>   net: sungem: use pci_status_get_and_clear_errors
>   net: skfp: use PCI_STATUS_ERROR_BITS
>   PCI: pci-bridge-emul: use PCI_STATUS_ERROR_BITS
>   sound: bt87x: use pci_status_get_and_clear_errors
> 
>  drivers/net/ethernet/marvell/skge.h       |  6 -----
>  drivers/net/ethernet/marvell/sky2.h       |  6 -----
>  drivers/net/ethernet/realtek/r8169_main.c | 15 +++++-------
>  drivers/net/ethernet/sun/cassini.c        | 28 ++++++++-------------
>  drivers/net/ethernet/sun/sungem.c         | 30 +++++++----------------
>  drivers/net/fddi/skfp/drvfbi.c            |  2 +-
>  drivers/net/fddi/skfp/h/skfbi.h           |  5 ----
>  drivers/pci/pci-bridge-emul.c             | 14 ++---------
>  drivers/pci/pci.c                         | 23 +++++++++++++++++
>  include/linux/pci.h                       |  1 +
>  include/uapi/linux/pci_regs.h             |  7 ++++++
>  sound/pci/bt87x.c                         |  7 +-----
>  12 files changed, 60 insertions(+), 84 deletions(-)
> 
> -- 
> 2.25.1
> 
> 
> 

WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Helgaas <helgaas@kernel.org>
To: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>,
	David Miller <davem@davemloft.net>,
	Mirko Lindner <mlindner@marvell.com>,
	Stephen Hemminger <stephen@networkplumber.org>,
	Clemens Ladisch <clemens@ladisch.de>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	alsa-devel@alsa-project.org
Subject: Re: [PATCH v3 0/8] PCI: add and use constant PCI_STATUS_ERROR_BITS and helper pci_status_get_and_clear_errors
Date: Tue, 25 Feb 2020 14:57:55 -0600	[thread overview]
Message-ID: <20200225205755.GA199380@google.com> (raw)
In-Reply-To: <20ca7c1f-7530-2d89-40a6-d97a65aa25ef@gmail.com>

On Tue, Feb 25, 2020 at 03:03:05PM +0100, Heiner Kallweit wrote:
> Few drivers have own definitions for this constant, so move it to the
> PCI core. In addition there are several places where the following
> code sequence is used:
> 1. Read PCI_STATUS
> 2. Mask out non-error bits
> 3. Action based on set error bits
> 4. Write back set error bits to clear them
> 
> As this is a repeated pattern, add a helper to the PCI core.
> 
> Most affected drivers are network drivers. But as it's about core
> PCI functionality, I suppose the series should go through the PCI
> tree.

Makes good sense to me, thanks for doing this.

> v2:
> - fix formal issue with cover letter
> v3:
> - fix dumb typo in patch 7
> 
> Heiner Kallweit (8):
>   PCI: add constant PCI_STATUS_ERROR_BITS
>   PCI: add pci_status_get_and_clear_errors
>   r8169: use pci_status_get_and_clear_errors
>   net: cassini: use pci_status_get_and_clear_errors
>   net: sungem: use pci_status_get_and_clear_errors
>   net: skfp: use PCI_STATUS_ERROR_BITS
>   PCI: pci-bridge-emul: use PCI_STATUS_ERROR_BITS
>   sound: bt87x: use pci_status_get_and_clear_errors
> 
>  drivers/net/ethernet/marvell/skge.h       |  6 -----
>  drivers/net/ethernet/marvell/sky2.h       |  6 -----
>  drivers/net/ethernet/realtek/r8169_main.c | 15 +++++-------
>  drivers/net/ethernet/sun/cassini.c        | 28 ++++++++-------------
>  drivers/net/ethernet/sun/sungem.c         | 30 +++++++----------------
>  drivers/net/fddi/skfp/drvfbi.c            |  2 +-
>  drivers/net/fddi/skfp/h/skfbi.h           |  5 ----
>  drivers/pci/pci-bridge-emul.c             | 14 ++---------
>  drivers/pci/pci.c                         | 23 +++++++++++++++++
>  include/linux/pci.h                       |  1 +
>  include/uapi/linux/pci_regs.h             |  7 ++++++
>  sound/pci/bt87x.c                         |  7 +-----
>  12 files changed, 60 insertions(+), 84 deletions(-)
> 
> -- 
> 2.25.1
> 
> 
> 

  parent reply	other threads:[~2020-02-25 20:59 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-25 14:03 [PATCH v3 0/8] PCI: add and use constant PCI_STATUS_ERROR_BITS and helper pci_status_get_and_clear_errors Heiner Kallweit
2020-02-25 14:03 ` [PATCH v3 1/8] PCI: add constant PCI_STATUS_ERROR_BITS Heiner Kallweit
2020-02-25 20:50   ` Bjorn Helgaas
2020-02-25 20:50     ` Bjorn Helgaas
2020-02-25 21:35     ` Heiner Kallweit
2020-02-25 14:04 ` [PATCH v3 2/8] PCI: add pci_status_get_and_clear_errors Heiner Kallweit
2020-02-25 20:57   ` Bjorn Helgaas
2020-02-25 20:57     ` Bjorn Helgaas
2020-02-25 14:04 ` [PATCH v3 3/8] r8169: use pci_status_get_and_clear_errors Heiner Kallweit
2020-02-25 14:05 ` [PATCH v3 4/8] net: cassini: " Heiner Kallweit
2020-02-25 14:05 ` [PATCH v3 5/8] net: sungem: " Heiner Kallweit
2020-02-25 14:06 ` [PATCH v3 6/8] net: skfp: use PCI_STATUS_ERROR_BITS Heiner Kallweit
2020-02-25 14:07 ` [PATCH v3 7/8] PCI: pci-bridge-emul: " Heiner Kallweit
2020-02-25 14:07 ` [PATCH v3 8/8] sound: bt87x: use pci_status_get_and_clear_errors Heiner Kallweit
2020-02-25 20:57 ` Bjorn Helgaas [this message]
2020-02-25 20:57   ` [PATCH v3 0/8] PCI: add and use constant PCI_STATUS_ERROR_BITS and helper pci_status_get_and_clear_errors Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200225205755.GA199380@google.com \
    --to=helgaas@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=clemens@ladisch.de \
    --cc=davem@davemloft.net \
    --cc=hkallweit1@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mlindner@marvell.com \
    --cc=netdev@vger.kernel.org \
    --cc=nic_swsd@realtek.com \
    --cc=stephen@networkplumber.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.