From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Sibi Sankar <sibis@codeaurora.org>
Cc: srinivas.kandagatla@linaro.org, robh+dt@kernel.org,
agross@kernel.org, mark.rutland@arm.com,
linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
tsoni@codeaurora.org, vnkgutta@codeaurora.org
Subject: Re: [PATCH v4 2/3] dt-bindings: soc: qcom: apr: Add protection domain bindings
Date: Thu, 27 Feb 2020 21:35:50 -0800 [thread overview]
Message-ID: <20200228053550.GD210720@yoga> (raw)
In-Reply-To: <20200226170001.24234-3-sibis@codeaurora.org>
On Wed 26 Feb 09:00 PST 2020, Sibi Sankar wrote:
> Qualcomm SoCs (starting with MSM8998) allow for multiple protection
> domains (PDs) to run on the same Q6 sub-system. This allows for
> services like AVS AUDIO to have their own separate address space and
> crash/recover without disrupting the other PDs running on the same Q6
> ADSP. Add "qcom,protection-domain" bindings to capture the dependencies
> between the APR service and the PD on which the apr service runs.
>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---
> .../devicetree/bindings/soc/qcom/qcom,apr.txt | 50 +++++++++++++++++++
> 1 file changed, 50 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> index db501269f47b8..f8fa71f5d84ba 100644
> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> @@ -45,6 +45,18 @@ by the individual bindings for the specific service
> 12 - Ultrasound stream manager.
> 13 - Listen stream manager.
>
> +- qcom,protection-domain
> + Usage: optional
> + Value type: <stringlist>
> + Definition: Must list the protection domain service name and path
> + that the particular apr service has a dependency on.
> + Possible values are :
> + "avs/audio", "msm/adsp/audio_pd".
> + "kernel/elf_loader", "msm/modem/wlan_pd".
> + "tms/servreg", "msm/adsp/audio_pd".
> + "tms/servreg", "msm/modem/wlan_pd".
> + "tms/servreg", "msm/slpi/sensor_pd".
> +
> = EXAMPLE
> The following example represents a QDSP based sound card on a MSM8996 device
> which uses apr as communication between Apps and QDSP.
> @@ -82,3 +94,41 @@ which uses apr as communication between Apps and QDSP.
> ...
> };
> };
> +
> += EXAMPLE 2
> +The following example represents a QDSP based sound card with protection domain
> +dependencies specified. Here some of the apr services are dependent on services
> +running on protection domain hosted on ADSP/SLPI remote processors while others
> +have no such dependency.
> +
> + apr {
> + compatible = "qcom,apr-v2";
> + qcom,glink-channels = "apr_audio_svc";
> + qcom,apr-domain = <APR_DOMAIN_ADSP>;
> +
> + q6core {
> + compatible = "qcom,q6core";
> + reg = <APR_SVC_ADSP_CORE>;
> + };
> +
> + q6afe: q6afe {
> + compatible = "qcom,q6afe";
> + reg = <APR_SVC_AFE>;
> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> + ...
> + };
> +
> + q6asm: q6asm {
> + compatible = "qcom,q6asm";
> + reg = <APR_SVC_ASM>;
> + qcom,protection-domain = "tms/servreg", "msm/slpi/sensor_pd";
> + ...
> + };
> +
> + q6adm: q6adm {
> + compatible = "qcom,q6adm";
> + reg = <APR_SVC_ADM>;
> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> + ...
> + };
> + };
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Sibi Sankar <sibis@codeaurora.org>
Cc: srinivas.kandagatla@linaro.org, robh+dt@kernel.org,
agross@kernel.org, mark.rutland@arm.com,
linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
tsoni@codeaurora.org, vnkgutta@codeaurora.org
Subject: Re: [PATCH v4 2/3] dt-bindings: soc: qcom: apr: Add protection domain bindings
Date: Thu, 27 Feb 2020 21:35:53 -0800 [thread overview]
Message-ID: <20200228053550.GD210720@yoga> (raw)
In-Reply-To: <20200226170001.24234-3-sibis@codeaurora.org>
On Wed 26 Feb 09:00 PST 2020, Sibi Sankar wrote:
> Qualcomm SoCs (starting with MSM8998) allow for multiple protection
> domains (PDs) to run on the same Q6 sub-system. This allows for
> services like AVS AUDIO to have their own separate address space and
> crash/recover without disrupting the other PDs running on the same Q6
> ADSP. Add "qcom,protection-domain" bindings to capture the dependencies
> between the APR service and the PD on which the apr service runs.
>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---
> .../devicetree/bindings/soc/qcom/qcom,apr.txt | 50 +++++++++++++++++++
> 1 file changed, 50 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> index db501269f47b8..f8fa71f5d84ba 100644
> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> @@ -45,6 +45,18 @@ by the individual bindings for the specific service
> 12 - Ultrasound stream manager.
> 13 - Listen stream manager.
>
> +- qcom,protection-domain
> + Usage: optional
> + Value type: <stringlist>
> + Definition: Must list the protection domain service name and path
> + that the particular apr service has a dependency on.
> + Possible values are :
> + "avs/audio", "msm/adsp/audio_pd".
> + "kernel/elf_loader", "msm/modem/wlan_pd".
> + "tms/servreg", "msm/adsp/audio_pd".
> + "tms/servreg", "msm/modem/wlan_pd".
> + "tms/servreg", "msm/slpi/sensor_pd".
> +
> = EXAMPLE
> The following example represents a QDSP based sound card on a MSM8996 device
> which uses apr as communication between Apps and QDSP.
> @@ -82,3 +94,41 @@ which uses apr as communication between Apps and QDSP.
> ...
> };
> };
> +
> += EXAMPLE 2
> +The following example represents a QDSP based sound card with protection domain
> +dependencies specified. Here some of the apr services are dependent on services
> +running on protection domain hosted on ADSP/SLPI remote processors while others
> +have no such dependency.
> +
> + apr {
> + compatible = "qcom,apr-v2";
> + qcom,glink-channels = "apr_audio_svc";
> + qcom,apr-domain = <APR_DOMAIN_ADSP>;
> +
> + q6core {
> + compatible = "qcom,q6core";
> + reg = <APR_SVC_ADSP_CORE>;
> + };
> +
> + q6afe: q6afe {
> + compatible = "qcom,q6afe";
> + reg = <APR_SVC_AFE>;
> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> + ...
> + };
> +
> + q6asm: q6asm {
> + compatible = "qcom,q6asm";
> + reg = <APR_SVC_ASM>;
> + qcom,protection-domain = "tms/servreg", "msm/slpi/sensor_pd";
> + ...
> + };
> +
> + q6adm: q6adm {
> + compatible = "qcom,q6adm";
> + reg = <APR_SVC_ADM>;
> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> + ...
> + };
> + };
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2020-02-28 5:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-26 16:59 [PATCH v4 0/3] Introduce Protection Domain Restart (PDR) Helpers Sibi Sankar
2020-02-26 16:59 ` [PATCH v4 1/3] soc: qcom: Introduce Protection Domain Restart helpers Sibi Sankar
2020-02-28 5:34 ` Bjorn Andersson
2020-02-28 5:34 ` Bjorn Andersson
2020-02-26 17:00 ` [PATCH v4 2/3] dt-bindings: soc: qcom: apr: Add protection domain bindings Sibi Sankar
2020-02-28 5:35 ` Bjorn Andersson [this message]
2020-02-28 5:35 ` Bjorn Andersson
2020-02-26 17:00 ` [PATCH v4 3/3] soc: qcom: apr: Add avs/audio tracking functionality Sibi Sankar
2020-02-28 5:38 ` Bjorn Andersson
2020-02-28 5:38 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200228053550.GD210720@yoga \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=sibis@codeaurora.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=tsoni@codeaurora.org \
--cc=vnkgutta@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.