* [PATCH v2 2/2] usb: phy: Add driver for the Ingenic JZ4770 USB transceiver
2020-02-29 16:18 [PATCH v2 1/2] dt-bindings: Document JZ4770 PHY bindings Paul Cercueil
@ 2020-02-29 16:18 ` Paul Cercueil
2020-03-04 16:59 ` [PATCH v2 1/2] dt-bindings: Document JZ4770 PHY bindings Rob Herring
1 sibling, 0 replies; 3+ messages in thread
From: Paul Cercueil @ 2020-02-29 16:18 UTC (permalink / raw)
To: Felipe Balbi, Greg Kroah-Hartman, Rob Herring, Mark Rutland
Cc: od, linux-usb, devicetree, linux-kernel, Paul Cercueil
Add a driver to support the USB PHY found in the JZ4770 SoC from
Ingenic.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
Notes:
v2: Add missing include <linux/io.h>
drivers/usb/phy/Kconfig | 8 ++
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/phy-jz4770.c | 243 +++++++++++++++++++++++++++++++++++
3 files changed, 252 insertions(+)
create mode 100644 drivers/usb/phy/phy-jz4770.c
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index ff24fca0a2d9..4b3fa78995cf 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -184,4 +184,12 @@ config USB_ULPI_VIEWPORT
Provides read/write operations to the ULPI phy register set for
controllers with a viewport register (e.g. Chipidea/ARC controllers).
+config JZ4770_PHY
+ tristate "Ingenic JZ4770 Transceiver Driver"
+ depends on MIPS || COMPILE_TEST
+ select USB_PHY
+ help
+ This driver provides PHY support for the USB controller found
+ on the JZ4770 SoC from Ingenic.
+
endmenu
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index df1d99010079..b352bdbe8712 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -24,3 +24,4 @@ obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o
obj-$(CONFIG_USB_ULPI) += phy-ulpi.o
obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o
obj-$(CONFIG_KEYSTONE_USB_PHY) += phy-keystone.o
+obj-$(CONFIG_JZ4770_PHY) += phy-jz4770.o
diff --git a/drivers/usb/phy/phy-jz4770.c b/drivers/usb/phy/phy-jz4770.c
new file mode 100644
index 000000000000..3ea1f5b9bcf8
--- /dev/null
+++ b/drivers/usb/phy/phy-jz4770.c
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ingenic JZ4770 USB PHY driver
+ * Copyright (c) Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/phy.h>
+
+#define REG_USBPCR_OFFSET 0x00
+#define REG_USBRDT_OFFSET 0x04
+#define REG_USBVBFIL_OFFSET 0x08
+#define REG_USBPCR1_OFFSET 0x0c
+
+/* USBPCR */
+#define USBPCR_USB_MODE BIT(31)
+#define USBPCR_AVLD_REG BIT(30)
+#define USBPCR_INCRM BIT(27)
+#define USBPCR_CLK12_EN BIT(26)
+#define USBPCR_COMMONONN BIT(25)
+#define USBPCR_VBUSVLDEXT BIT(24)
+#define USBPCR_VBUSVLDEXTSEL BIT(23)
+#define USBPCR_POR BIT(22)
+#define USBPCR_SIDDQ BIT(21)
+#define USBPCR_OTG_DISABLE BIT(20)
+#define USBPCR_TXPREEMPHTUNE BIT(6)
+
+#define USBPCR_IDPULLUP_LSB 28
+#define USBPCR_IDPULLUP_MASK GENMASK(29, USBPCR_IDPULLUP_LSB)
+#define USBPCR_IDPULLUP_ALWAYS (3 << USBPCR_IDPULLUP_LSB)
+#define USBPCR_IDPULLUP_SUSPEND (1 << USBPCR_IDPULLUP_LSB)
+#define USBPCR_IDPULLUP_OTG (0 << USBPCR_IDPULLUP_LSB)
+
+#define USBPCR_COMPDISTUNE_LSB 17
+#define USBPCR_COMPDISTUNE_MASK GENMASK(19, USBPCR_COMPDISTUNE_LSB)
+#define USBPCR_COMPDISTUNE_DFT 4
+
+#define USBPCR_OTGTUNE_LSB 14
+#define USBPCR_OTGTUNE_MASK GENMASK(16, USBPCR_OTGTUNE_LSB)
+#define USBPCR_OTGTUNE_DFT 4
+
+#define USBPCR_SQRXTUNE_LSB 11
+#define USBPCR_SQRXTUNE_MASK GENMASK(13, USBPCR_SQRXTUNE_LSB)
+#define USBPCR_SQRXTUNE_DFT 3
+
+#define USBPCR_TXFSLSTUNE_LSB 7
+#define USBPCR_TXFSLSTUNE_MASK GENMASK(10, USBPCR_TXFSLSTUNE_LSB)
+#define USBPCR_TXFSLSTUNE_DFT 3
+
+#define USBPCR_TXRISETUNE_LSB 4
+#define USBPCR_TXRISETUNE_MASK GENMASK(5, USBPCR_TXRISETUNE_LSB)
+#define USBPCR_TXRISETUNE_DFT 3
+
+#define USBPCR_TXVREFTUNE_LSB 0
+#define USBPCR_TXVREFTUNE_MASK GENMASK(3, USBPCR_TXVREFTUNE_LSB)
+#define USBPCR_TXVREFTUNE_DFT 5
+
+/* USBRDT */
+#define USBRDT_VBFIL_LD_EN BIT(25)
+#define USBRDT_IDDIG_EN BIT(24)
+#define USBRDT_IDDIG_REG BIT(23)
+
+#define USBRDT_USBRDT_LSB 0
+#define USBRDT_USBRDT_MASK GENMASK(22, USBRDT_USBRDT_LSB)
+
+/* USBPCR1 */
+#define USBPCR1_UHC_POWON BIT(5)
+
+struct jz4770_phy {
+ struct usb_phy phy;
+ struct usb_otg otg;
+ struct device *dev;
+ void __iomem *base;
+ struct clk *clk;
+ struct regulator *vcc_supply;
+};
+
+static inline struct jz4770_phy *otg_to_jz4770_phy(struct usb_otg *otg)
+{
+ return container_of(otg, struct jz4770_phy, otg);
+}
+
+static inline struct jz4770_phy *phy_to_jz4770_phy(struct usb_phy *phy)
+{
+ return container_of(phy, struct jz4770_phy, phy);
+}
+
+static int jz4770_phy_set_peripheral(struct usb_otg *otg,
+ struct usb_gadget *gadget)
+{
+ struct jz4770_phy *priv = otg_to_jz4770_phy(otg);
+ u32 reg;
+
+ reg = readl(priv->base + REG_USBPCR_OFFSET);
+ reg &= ~USBPCR_USB_MODE;
+ reg |= USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE;
+ writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+ return 0;
+}
+
+static int jz4770_phy_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ struct jz4770_phy *priv = otg_to_jz4770_phy(otg);
+ u32 reg;
+
+ reg = readl(priv->base + REG_USBPCR_OFFSET);
+ reg &= ~(USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE);
+ reg |= USBPCR_USB_MODE;
+ writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+ return 0;
+}
+
+static int jz4770_phy_init(struct usb_phy *phy)
+{
+ struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+ int err;
+ u32 reg;
+
+ err = regulator_enable(priv->vcc_supply);
+ if (err) {
+ dev_err(priv->dev, "Unable to enable VCC: %d", err);
+ return err;
+ }
+
+ err = clk_prepare_enable(priv->clk);
+ if (err) {
+ dev_err(priv->dev, "Unable to start clock: %d", err);
+ return err;
+ }
+
+ reg = USBPCR_AVLD_REG | USBPCR_COMMONONN | USBPCR_IDPULLUP_ALWAYS |
+ (USBPCR_COMPDISTUNE_DFT << USBPCR_COMPDISTUNE_LSB) |
+ (USBPCR_OTGTUNE_DFT << USBPCR_OTGTUNE_LSB) |
+ (USBPCR_SQRXTUNE_DFT << USBPCR_SQRXTUNE_LSB) |
+ (USBPCR_TXFSLSTUNE_DFT << USBPCR_TXFSLSTUNE_LSB) |
+ (USBPCR_TXRISETUNE_DFT << USBPCR_TXRISETUNE_LSB) |
+ (USBPCR_TXVREFTUNE_DFT << USBPCR_TXVREFTUNE_LSB) |
+ USBPCR_POR;
+ writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+ /* Wait for PHY to reset */
+ usleep_range(30, 300);
+ writel(reg & ~USBPCR_POR, priv->base + REG_USBPCR_OFFSET);
+ usleep_range(300, 1000);
+
+ return 0;
+}
+
+static void jz4770_phy_shutdown(struct usb_phy *phy)
+{
+ struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+
+ clk_disable_unprepare(priv->clk);
+ regulator_disable(priv->vcc_supply);
+}
+
+static void jz4770_phy_remove(void *phy)
+{
+ usb_remove_phy(phy);
+}
+
+static int jz4770_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct jz4770_phy *priv;
+ int err;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, priv);
+ priv->dev = dev;
+ priv->phy.dev = dev;
+ priv->phy.otg = &priv->otg;
+ priv->phy.label = "jz4770-phy";
+ priv->phy.init = jz4770_phy_init;
+ priv->phy.shutdown = jz4770_phy_shutdown;
+
+ priv->otg.state = OTG_STATE_UNDEFINED;
+ priv->otg.usb_phy = &priv->phy;
+ priv->otg.set_host = jz4770_phy_set_host;
+ priv->otg.set_peripheral = jz4770_phy_set_peripheral;
+
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base)) {
+ dev_err(dev, "Failed to map registers");
+ return PTR_ERR(priv->base);
+ }
+
+ priv->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ err = PTR_ERR(priv->clk);
+ if (err != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get clock");
+ return err;
+ }
+
+ priv->vcc_supply = devm_regulator_get(dev, "vcc");
+ if (IS_ERR(priv->vcc_supply)) {
+ err = PTR_ERR(priv->vcc_supply);
+ if (err != -EPROBE_DEFER)
+ dev_err(dev, "failed to get regulator");
+ return err;
+ }
+
+ err = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
+ if (err) {
+ if (err != -EPROBE_DEFER)
+ dev_err(dev, "Unable to register PHY");
+ return err;
+ }
+
+ return devm_add_action_or_reset(dev, jz4770_phy_remove, &priv->phy);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id jz4770_phy_of_matches[] = {
+ { .compatible = "ingenic,jz4770-phy" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, jz4770_phy_of_matches);
+#endif
+
+static struct platform_driver jz4770_phy_driver = {
+ .probe = jz4770_phy_probe,
+ .driver = {
+ .name = "jz4770-phy",
+ .of_match_table = of_match_ptr(jz4770_phy_of_matches),
+ },
+};
+module_platform_driver(jz4770_phy_driver);
+
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("Ingenic JZ4770 USB PHY driver");
+MODULE_LICENSE("GPL");
--
2.25.1
^ permalink raw reply related [flat|nested] 3+ messages in thread