From: Shawn Guo <shawnguo@kernel.org>
To: peng.fan@nxp.com
Cc: abel.vesa@nxp.com, Anson.Huang@nxp.com, sboyd@kernel.org,
viresh.kumar@linaro.org, s.hauer@pengutronix.de,
rjw@rjwysocki.net, linux-kernel@vger.kernel.org,
robh+dt@kernel.org, linux-imx@nxp.com, kernel@pengutronix.de,
festevam@gmail.com, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 07/14] clk: imx7ulp: make it easy to change ARM core clk
Date: Tue, 10 Mar 2020 14:09:57 +0800 [thread overview]
Message-ID: <20200310060956.GJ15729@dragon> (raw)
In-Reply-To: <1582099197-20327-8-git-send-email-peng.fan@nxp.com>
On Wed, Feb 19, 2020 at 03:59:50PM +0800, peng.fan@nxp.com wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> ARM clk could only source from divcore or hsrun_divcore.
>
> However when ARM core is running normaly, whether divcore or
> hwrun_divcore will finally source from SPLL_PFD0. However SPLL_PFD0
> is marked with CLK_SET_GATE, so we need to disable SPLL_PFD0, when
> configure the rate. So add CORE and HSRUN_CORE virtual clk to make it
> easy to configure the clk using imx_clk_hw_cpu API.
It sounds a bit hackish, so would like to hear an ACK from Stephen on
it.
Shawn
>
> Since CORE and HSRUN_CORE already marked with CLK_IS_CRITICAL, no
> need to set ARM as CLK_IS_CRITICAL. And when set the rate of ARM clk,
> prograting it the parent with CLK_SET_RATE_PARENT will finally set
> the SPLL_PFD0 clk.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> drivers/clk/imx/clk-imx7ulp.c | 6 ++++--
> include/dt-bindings/clock/imx7ulp-clock.h | 5 ++++-
> 2 files changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/imx/clk-imx7ulp.c b/drivers/clk/imx/clk-imx7ulp.c
> index 3710aa0dee9b..634c0b6636b0 100644
> --- a/drivers/clk/imx/clk-imx7ulp.c
> +++ b/drivers/clk/imx/clk-imx7ulp.c
> @@ -29,7 +29,7 @@ static const char * const ddr_sels[] = { "apll_pfd_sel", "dummy", "dummy", "dum
> static const char * const nic_sels[] = { "firc", "ddr_clk", };
> static const char * const periph_plat_sels[] = { "dummy", "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", "upll", };
> static const char * const periph_bus_sels[] = { "dummy", "sosc_bus_clk", "dummy", "firc_bus_clk", "rosc", "nic1_bus_clk", "nic1_clk", "spll_bus_clk", };
> -static const char * const arm_sels[] = { "divcore", "dummy", "dummy", "hsrun_divcore", };
> +static const char * const arm_sels[] = { "core", "dummy", "dummy", "hsrun_core", };
>
> /* used by sosc/sirc/firc/ddr/spll/apll dividers */
> static const struct clk_div_table ulp_div_table[] = {
> @@ -121,7 +121,9 @@ static void __init imx7ulp_clk_scg1_init(struct device_node *np)
> hws[IMX7ULP_CLK_DDR_SEL] = imx_clk_hw_mux_flags("ddr_sel", base + 0x30, 24, 2, ddr_sels, ARRAY_SIZE(ddr_sels), CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
>
> hws[IMX7ULP_CLK_CORE_DIV] = imx_clk_hw_divider_flags("divcore", "scs_sel", base + 0x14, 16, 4, CLK_SET_RATE_PARENT);
> + hws[IMX7ULP_CLK_CORE] = imx_clk_hw_cpu("core", "divcore", hws[IMX7ULP_CLK_CORE_DIV]->clk, hws[IMX7ULP_CLK_SYS_SEL]->clk, hws[IMX7ULP_CLK_SPLL_SEL]->clk, hws[IMX7ULP_CLK_FIRC]->clk);
> hws[IMX7ULP_CLK_HSRUN_CORE_DIV] = imx_clk_hw_divider_flags("hsrun_divcore", "hsrun_scs_sel", base + 0x1c, 16, 4, CLK_SET_RATE_PARENT);
> + hws[IMX7ULP_CLK_HSRUN_CORE] = imx_clk_hw_cpu("hsrun_core", "hsrun_divcore", hws[IMX7ULP_CLK_HSRUN_CORE_DIV]->clk, hws[IMX7ULP_CLK_HSRUN_SYS_SEL]->clk, hws[IMX7ULP_CLK_SPLL_SEL]->clk, hws[IMX7ULP_CLK_FIRC]->clk);
>
> hws[IMX7ULP_CLK_DDR_DIV] = imx_clk_hw_divider_gate("ddr_clk", "ddr_sel", CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, base + 0x30, 0, 3,
> 0, ulp_div_table, &imx_ccm_lock);
> @@ -270,7 +272,7 @@ static void __init imx7ulp_clk_smc1_init(struct device_node *np)
> base = of_iomap(np, 0);
> WARN_ON(!base);
>
> - hws[IMX7ULP_CLK_ARM] = imx_clk_hw_mux_flags("arm", base + 0x10, 8, 2, arm_sels, ARRAY_SIZE(arm_sels), CLK_IS_CRITICAL);
> + hws[IMX7ULP_CLK_ARM] = imx_clk_hw_mux_flags("arm", base + 0x10, 8, 2, arm_sels, ARRAY_SIZE(arm_sels), CLK_SET_RATE_PARENT);
>
> imx_check_clk_hws(hws, clk_data->num);
>
> diff --git a/include/dt-bindings/clock/imx7ulp-clock.h b/include/dt-bindings/clock/imx7ulp-clock.h
> index 38145bdcd975..b58370d146e2 100644
> --- a/include/dt-bindings/clock/imx7ulp-clock.h
> +++ b/include/dt-bindings/clock/imx7ulp-clock.h
> @@ -58,7 +58,10 @@
> #define IMX7ULP_CLK_HSRUN_SYS_SEL 44
> #define IMX7ULP_CLK_HSRUN_CORE_DIV 45
>
> -#define IMX7ULP_CLK_SCG1_END 46
> +#define IMX7ULP_CLK_CORE 46
> +#define IMX7ULP_CLK_HSRUN_CORE 47
> +
> +#define IMX7ULP_CLK_SCG1_END 48
>
> /* PCC2 */
> #define IMX7ULP_CLK_DMA1 0
> --
> 2.16.4
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: peng.fan@nxp.com
Cc: s.hauer@pengutronix.de, sboyd@kernel.org, robh+dt@kernel.org,
viresh.kumar@linaro.org, rjw@rjwysocki.net,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
Anson.Huang@nxp.com, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, abel.vesa@nxp.com
Subject: Re: [PATCH v2 07/14] clk: imx7ulp: make it easy to change ARM core clk
Date: Tue, 10 Mar 2020 14:09:57 +0800 [thread overview]
Message-ID: <20200310060956.GJ15729@dragon> (raw)
In-Reply-To: <1582099197-20327-8-git-send-email-peng.fan@nxp.com>
On Wed, Feb 19, 2020 at 03:59:50PM +0800, peng.fan@nxp.com wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> ARM clk could only source from divcore or hsrun_divcore.
>
> However when ARM core is running normaly, whether divcore or
> hwrun_divcore will finally source from SPLL_PFD0. However SPLL_PFD0
> is marked with CLK_SET_GATE, so we need to disable SPLL_PFD0, when
> configure the rate. So add CORE and HSRUN_CORE virtual clk to make it
> easy to configure the clk using imx_clk_hw_cpu API.
It sounds a bit hackish, so would like to hear an ACK from Stephen on
it.
Shawn
>
> Since CORE and HSRUN_CORE already marked with CLK_IS_CRITICAL, no
> need to set ARM as CLK_IS_CRITICAL. And when set the rate of ARM clk,
> prograting it the parent with CLK_SET_RATE_PARENT will finally set
> the SPLL_PFD0 clk.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> drivers/clk/imx/clk-imx7ulp.c | 6 ++++--
> include/dt-bindings/clock/imx7ulp-clock.h | 5 ++++-
> 2 files changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/imx/clk-imx7ulp.c b/drivers/clk/imx/clk-imx7ulp.c
> index 3710aa0dee9b..634c0b6636b0 100644
> --- a/drivers/clk/imx/clk-imx7ulp.c
> +++ b/drivers/clk/imx/clk-imx7ulp.c
> @@ -29,7 +29,7 @@ static const char * const ddr_sels[] = { "apll_pfd_sel", "dummy", "dummy", "dum
> static const char * const nic_sels[] = { "firc", "ddr_clk", };
> static const char * const periph_plat_sels[] = { "dummy", "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", "upll", };
> static const char * const periph_bus_sels[] = { "dummy", "sosc_bus_clk", "dummy", "firc_bus_clk", "rosc", "nic1_bus_clk", "nic1_clk", "spll_bus_clk", };
> -static const char * const arm_sels[] = { "divcore", "dummy", "dummy", "hsrun_divcore", };
> +static const char * const arm_sels[] = { "core", "dummy", "dummy", "hsrun_core", };
>
> /* used by sosc/sirc/firc/ddr/spll/apll dividers */
> static const struct clk_div_table ulp_div_table[] = {
> @@ -121,7 +121,9 @@ static void __init imx7ulp_clk_scg1_init(struct device_node *np)
> hws[IMX7ULP_CLK_DDR_SEL] = imx_clk_hw_mux_flags("ddr_sel", base + 0x30, 24, 2, ddr_sels, ARRAY_SIZE(ddr_sels), CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
>
> hws[IMX7ULP_CLK_CORE_DIV] = imx_clk_hw_divider_flags("divcore", "scs_sel", base + 0x14, 16, 4, CLK_SET_RATE_PARENT);
> + hws[IMX7ULP_CLK_CORE] = imx_clk_hw_cpu("core", "divcore", hws[IMX7ULP_CLK_CORE_DIV]->clk, hws[IMX7ULP_CLK_SYS_SEL]->clk, hws[IMX7ULP_CLK_SPLL_SEL]->clk, hws[IMX7ULP_CLK_FIRC]->clk);
> hws[IMX7ULP_CLK_HSRUN_CORE_DIV] = imx_clk_hw_divider_flags("hsrun_divcore", "hsrun_scs_sel", base + 0x1c, 16, 4, CLK_SET_RATE_PARENT);
> + hws[IMX7ULP_CLK_HSRUN_CORE] = imx_clk_hw_cpu("hsrun_core", "hsrun_divcore", hws[IMX7ULP_CLK_HSRUN_CORE_DIV]->clk, hws[IMX7ULP_CLK_HSRUN_SYS_SEL]->clk, hws[IMX7ULP_CLK_SPLL_SEL]->clk, hws[IMX7ULP_CLK_FIRC]->clk);
>
> hws[IMX7ULP_CLK_DDR_DIV] = imx_clk_hw_divider_gate("ddr_clk", "ddr_sel", CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, base + 0x30, 0, 3,
> 0, ulp_div_table, &imx_ccm_lock);
> @@ -270,7 +272,7 @@ static void __init imx7ulp_clk_smc1_init(struct device_node *np)
> base = of_iomap(np, 0);
> WARN_ON(!base);
>
> - hws[IMX7ULP_CLK_ARM] = imx_clk_hw_mux_flags("arm", base + 0x10, 8, 2, arm_sels, ARRAY_SIZE(arm_sels), CLK_IS_CRITICAL);
> + hws[IMX7ULP_CLK_ARM] = imx_clk_hw_mux_flags("arm", base + 0x10, 8, 2, arm_sels, ARRAY_SIZE(arm_sels), CLK_SET_RATE_PARENT);
>
> imx_check_clk_hws(hws, clk_data->num);
>
> diff --git a/include/dt-bindings/clock/imx7ulp-clock.h b/include/dt-bindings/clock/imx7ulp-clock.h
> index 38145bdcd975..b58370d146e2 100644
> --- a/include/dt-bindings/clock/imx7ulp-clock.h
> +++ b/include/dt-bindings/clock/imx7ulp-clock.h
> @@ -58,7 +58,10 @@
> #define IMX7ULP_CLK_HSRUN_SYS_SEL 44
> #define IMX7ULP_CLK_HSRUN_CORE_DIV 45
>
> -#define IMX7ULP_CLK_SCG1_END 46
> +#define IMX7ULP_CLK_CORE 46
> +#define IMX7ULP_CLK_HSRUN_CORE 47
> +
> +#define IMX7ULP_CLK_SCG1_END 48
>
> /* PCC2 */
> #define IMX7ULP_CLK_DMA1 0
> --
> 2.16.4
>
next prev parent reply other threads:[~2020-03-10 6:10 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-19 7:59 [PATCH v2 00/14] ARM: imx7ulp: add cpufreq using cpufreq-dt peng.fan
2020-02-19 7:59 ` peng.fan
2020-02-19 7:59 ` [PATCH v2 01/14] dt-bindings: fsl: add i.MX7ULP PMC binding doc peng.fan
2020-02-19 7:59 ` peng.fan
2020-03-10 5:49 ` Shawn Guo
2020-03-10 5:49 ` Shawn Guo
2020-03-10 5:56 ` Peng Fan
2020-03-10 5:56 ` Peng Fan
2020-03-11 7:39 ` Peng Fan
2020-03-11 7:39 ` Peng Fan
2020-02-19 7:59 ` [PATCH v2 02/14] ARM: dts: imx7ulp: add pmc node peng.fan
2020-02-19 7:59 ` peng.fan
2020-02-19 7:59 ` [PATCH v2 03/14] clk: imx: Fix division by zero warning on pfdv2 peng.fan
2020-02-19 7:59 ` peng.fan
2020-03-10 5:53 ` Shawn Guo
2020-03-10 5:53 ` Shawn Guo
2020-02-19 7:59 ` [PATCH v2 04/14] clk: imx: pfdv2: switch to use determine_rate peng.fan
2020-02-19 7:59 ` peng.fan
2020-03-10 6:02 ` Shawn Guo
2020-03-10 6:02 ` Shawn Guo
2020-02-19 7:59 ` [PATCH v2 05/14] clk: imx: pfdv2: determine best parent rate peng.fan
2020-02-19 7:59 ` peng.fan
2020-03-10 6:04 ` Shawn Guo
2020-03-10 6:04 ` Shawn Guo
2020-02-19 7:59 ` [PATCH v2 06/14] clk: imx: pllv4: use prepare/unprepare peng.fan
2020-02-19 7:59 ` peng.fan
2020-03-10 6:04 ` Shawn Guo
2020-03-10 6:04 ` Shawn Guo
2020-02-19 7:59 ` [PATCH v2 07/14] clk: imx7ulp: make it easy to change ARM core clk peng.fan
2020-02-19 7:59 ` peng.fan
2020-03-10 6:09 ` Shawn Guo [this message]
2020-03-10 6:09 ` Shawn Guo
2020-03-10 6:19 ` Peng Fan
2020-03-10 6:19 ` Peng Fan
2020-02-19 7:59 ` [PATCH v2 08/14] ARM: imx: imx7ulp: support HSRUN mode peng.fan
2020-02-19 7:59 ` peng.fan
2020-02-19 7:59 ` [PATCH v2 09/14] ARM: imx: cpuidle-imx7ulp: Stop mode disallowed when HSRUN peng.fan
2020-02-19 7:59 ` peng.fan
2020-03-10 6:13 ` Shawn Guo
2020-03-10 6:13 ` Shawn Guo
2020-03-10 7:35 ` Peng Fan
2020-03-10 7:35 ` Peng Fan
2020-02-19 7:59 ` [PATCH v2 10/14] cpufreq: dt: Allow platform specific intermediate callbacks peng.fan
2020-02-19 7:59 ` peng.fan
2020-02-19 9:35 ` Viresh Kumar
2020-02-19 9:35 ` Viresh Kumar
2020-02-19 9:41 ` Peng Fan
2020-02-19 9:41 ` Peng Fan
2020-02-19 9:45 ` Viresh Kumar
2020-02-19 9:45 ` Viresh Kumar
2020-02-19 9:46 ` Viresh Kumar
2020-02-19 9:46 ` Viresh Kumar
2020-02-19 9:55 ` Peng Fan
2020-02-19 9:55 ` Peng Fan
2020-03-12 10:15 ` Viresh Kumar
2020-03-12 10:15 ` Viresh Kumar
2020-02-19 7:59 ` [PATCH v2 11/14] cpufreq: Add i.MX7ULP to cpufreq-dt-platdev blacklist peng.fan
2020-02-19 7:59 ` peng.fan
2020-02-19 7:59 ` [PATCH v2 12/14] cpufreq: imx-cpufreq-dt: support i.MX7ULP peng.fan
2020-02-19 7:59 ` peng.fan
2020-02-19 7:59 ` [PATCH v2 13/14] ARM: imx7ulp: enable cpufreq peng.fan
2020-02-19 7:59 ` peng.fan
2020-02-19 7:59 ` [PATCH v2 14/14] [Do not Apply] ARM: dts: imx7ulp: add cpu OPP points peng.fan
2020-02-19 7:59 ` peng.fan
2020-03-02 1:40 ` [PATCH v2 00/14] ARM: imx7ulp: add cpufreq using cpufreq-dt Peng Fan
2020-03-02 1:40 ` Peng Fan
2020-03-02 17:48 ` Fabio Estevam
2020-03-02 17:48 ` Fabio Estevam
2020-03-03 1:08 ` Peng Fan
2020-03-03 1:08 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200310060956.GJ15729@dragon \
--to=shawnguo@kernel.org \
--cc=Anson.Huang@nxp.com \
--cc=abel.vesa@nxp.com \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=rjw@rjwysocki.net \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.