From: shiva.linuxworks@gmail.com
To: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Boris Brezillon <boris.brezillon@collabora.com>,
Chuanhong Guo <gch981213@gmail.com>,
Frieder Schrempf <frieder.schrempf@kontron.de>,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Shivamurthy Shastri <sshivamurthy@micron.com>
Subject: [PATCH v7 0/6] Add new series Micron SPI NAND devices
Date: Wed, 11 Mar 2020 18:57:29 +0100 [thread overview]
Message-ID: <20200311175735.2007-1-sshivamurthy@micron.com> (raw)
From: Shivamurthy Shastri <sshivamurthy@micron.com>
This patchset is for the new series of Micron SPI NAND devices, and the
following links are their datasheets.
M78A:
[1] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m78a_1gb_3v_nand_spi.pdf
[2] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m78a_1gb_1_8v_nand_spi.pdf
M79A:
[3] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m79a_2gb_1_8v_nand_spi.pdf
[4] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m79a_ddp_4gb_3v_nand_spi.pdf
M70A:
[5] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_4gb_3v_nand_spi.pdf
[6] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_4gb_1_8v_nand_spi.pdf
[7] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_ddp_8gb_3v_nand_spi.pdf
[8] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_ddp_8gb_1_8v_nand_spi.pdf
Changes since v6:
-----------------
1. Rebased series to nand/next.
2. Added Reviewed-by from Boris.
Changes since v5:
-----------------
1. Rebased series to v5.6-rc1.
Changes since v4:
-----------------
1. Patch 2 is separated into two as per the comment by Boris.
2. Renamed MICRON_CFG_CONTI_READ into MICRON_CFG_CR.
3. Reworked die selection function as per the comment by Boris.
Changes since v3:
-----------------
1. Patch 3 and 4 reworked as follows
- Patch 3 introducing the Continuous read feature
- Patch 4 adding devices with the feature
Changes since v2:
-----------------
1. Patch commit messages have been modified.
2. Handled devices with Continuous Read feature with vendor specific flag.
3. Reworked die selection function as per the comment.
Changes since v1:
-----------------
1. The patch split into multiple patches.
2. Added comments for selecting the die.
Shivamurthy Shastri (6):
mtd: spinand: micron: Generalize the OOB layout structure and function
names
mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD
mtd: spinand: micron: Add new Micron SPI NAND devices
mtd: spinand: micron: identify SPI NAND device with Continuous Read
mode
mtd: spinand: micron: Add M70A series Micron SPI NAND devices
mtd: spinand: micron: Add new Micron SPI NAND devices with multiple
dies
drivers/mtd/nand/spi/micron.c | 158 +++++++++++++++++++++++++++++++---
include/linux/mtd/spinand.h | 1 +
2 files changed, 145 insertions(+), 14 deletions(-)
--
2.17.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: shiva.linuxworks@gmail.com
To: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Boris Brezillon <boris.brezillon@collabora.com>,
Chuanhong Guo <gch981213@gmail.com>,
Frieder Schrempf <frieder.schrempf@kontron.de>,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Shivamurthy Shastri <sshivamurthy@micron.com>
Subject: [PATCH v7 0/6] Add new series Micron SPI NAND devices
Date: Wed, 11 Mar 2020 18:57:29 +0100 [thread overview]
Message-ID: <20200311175735.2007-1-sshivamurthy@micron.com> (raw)
From: Shivamurthy Shastri <sshivamurthy@micron.com>
This patchset is for the new series of Micron SPI NAND devices, and the
following links are their datasheets.
M78A:
[1] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m78a_1gb_3v_nand_spi.pdf
[2] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m78a_1gb_1_8v_nand_spi.pdf
M79A:
[3] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m79a_2gb_1_8v_nand_spi.pdf
[4] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m79a_ddp_4gb_3v_nand_spi.pdf
M70A:
[5] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_4gb_3v_nand_spi.pdf
[6] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_4gb_1_8v_nand_spi.pdf
[7] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_ddp_8gb_3v_nand_spi.pdf
[8] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_ddp_8gb_1_8v_nand_spi.pdf
Changes since v6:
-----------------
1. Rebased series to nand/next.
2. Added Reviewed-by from Boris.
Changes since v5:
-----------------
1. Rebased series to v5.6-rc1.
Changes since v4:
-----------------
1. Patch 2 is separated into two as per the comment by Boris.
2. Renamed MICRON_CFG_CONTI_READ into MICRON_CFG_CR.
3. Reworked die selection function as per the comment by Boris.
Changes since v3:
-----------------
1. Patch 3 and 4 reworked as follows
- Patch 3 introducing the Continuous read feature
- Patch 4 adding devices with the feature
Changes since v2:
-----------------
1. Patch commit messages have been modified.
2. Handled devices with Continuous Read feature with vendor specific flag.
3. Reworked die selection function as per the comment.
Changes since v1:
-----------------
1. The patch split into multiple patches.
2. Added comments for selecting the die.
Shivamurthy Shastri (6):
mtd: spinand: micron: Generalize the OOB layout structure and function
names
mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD
mtd: spinand: micron: Add new Micron SPI NAND devices
mtd: spinand: micron: identify SPI NAND device with Continuous Read
mode
mtd: spinand: micron: Add M70A series Micron SPI NAND devices
mtd: spinand: micron: Add new Micron SPI NAND devices with multiple
dies
drivers/mtd/nand/spi/micron.c | 158 +++++++++++++++++++++++++++++++---
include/linux/mtd/spinand.h | 1 +
2 files changed, 145 insertions(+), 14 deletions(-)
--
2.17.1
next reply other threads:[~2020-03-11 17:59 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-11 17:57 shiva.linuxworks [this message]
2020-03-11 17:57 ` [PATCH v7 0/6] Add new series Micron SPI NAND devices shiva.linuxworks
2020-03-11 17:57 ` [PATCH v7 1/6] mtd: spinand: micron: Generalize the OOB layout structure and function names shiva.linuxworks
2020-03-11 17:57 ` shiva.linuxworks
2020-03-12 21:33 ` Miquel Raynal
2020-03-12 21:33 ` Miquel Raynal
2020-03-11 17:57 ` [PATCH v7 2/6] mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD shiva.linuxworks
2020-03-11 17:57 ` shiva.linuxworks
2020-03-12 21:33 ` Miquel Raynal
2020-03-12 21:33 ` Miquel Raynal
2020-03-11 17:57 ` [PATCH v7 3/6] mtd: spinand: micron: Add new Micron SPI NAND devices shiva.linuxworks
2020-03-11 17:57 ` shiva.linuxworks
2020-03-12 21:33 ` Miquel Raynal
2020-03-12 21:33 ` Miquel Raynal
2020-03-11 17:57 ` [PATCH v7 4/6] mtd: spinand: micron: identify SPI NAND device with Continuous Read mode shiva.linuxworks
2020-03-11 17:57 ` shiva.linuxworks
2020-03-12 21:33 ` Miquel Raynal
2020-03-12 21:33 ` Miquel Raynal
2020-03-11 17:57 ` [PATCH v7 5/6] mtd: spinand: micron: Add M70A series Micron SPI NAND devices shiva.linuxworks
2020-03-11 17:57 ` shiva.linuxworks
2020-03-12 21:33 ` Miquel Raynal
2020-03-12 21:33 ` Miquel Raynal
2020-03-11 17:57 ` [PATCH v7 6/6] mtd: spinand: micron: Add new Micron SPI NAND devices with multiple dies shiva.linuxworks
2020-03-11 17:57 ` shiva.linuxworks
2020-03-12 21:33 ` Miquel Raynal
2020-03-12 21:33 ` Miquel Raynal
2020-03-12 19:16 ` [EXT] [PATCH v7 0/6] Add new series Micron SPI NAND devices Shivamurthy Shastri (sshivamurthy)
2020-03-12 19:16 ` Shivamurthy Shastri (sshivamurthy)
2020-03-12 19:39 ` Miquel Raynal
2020-03-12 19:39 ` Miquel Raynal
2020-05-15 5:27 ` Naresh Kamboju
2020-05-15 5:27 ` Naresh Kamboju
2020-05-15 5:29 ` Poonam Aggrwal
2020-05-15 5:29 ` Poonam Aggrwal
2020-05-15 7:33 ` Miquel Raynal
2020-05-15 7:33 ` Miquel Raynal
2020-05-15 9:59 ` [EXT] " Shivamurthy Shastri (sshivamurthy)
2020-05-15 9:59 ` Shivamurthy Shastri (sshivamurthy)
2020-05-15 10:02 ` Suram Suram
2020-05-15 10:02 ` Suram Suram
2020-05-15 10:13 ` X.f. Ren
2020-05-15 10:13 ` X.f. Ren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200311175735.2007-1-sshivamurthy@micron.com \
--to=shiva.linuxworks@gmail.com \
--cc=boris.brezillon@collabora.com \
--cc=frieder.schrempf@kontron.de \
--cc=gch981213@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=sshivamurthy@micron.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.