From: Sam Ravnborg <sam@ravnborg.org>
To: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: devicetree@vger.kernel.org, David Airlie <airlied@linux.ie>,
Alexey Brodkin <Alexey.Brodkin@synopsys.com>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Rob Herring <robh+dt@kernel.org>,
linux-snps-arc@lists.infradead.org
Subject: Re: [PATCH 2/2] dt-bindings: Document the Synopsys ARC HDMI TX bindings
Date: Mon, 16 Mar 2020 16:05:48 +0100 [thread overview]
Message-ID: <20200316150548.GA25294@ravnborg.org> (raw)
In-Reply-To: <20200316144647.10416-3-Eugeniy.Paltsev@synopsys.com>
Hi Eugeniy.
On Mon, Mar 16, 2020 at 05:46:47PM +0300, Eugeniy Paltsev wrote:
> This patch adds documentation of device tree bindings for the Synopsys
> HDMI 2.0 TX encoder driver for ARC SoCs.
>
> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> ---
> .../display/bridge/snps,arc-dw-hdmi.txt | 73 +++++++++++++++++++
New bindings in DT Schema format please (.yaml files).
We are working on migrating all bindings to DT Schema format.
Sam
> 1 file changed, 73 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.txt
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.txt
> new file mode 100644
> index 000000000000..d5e006b392cc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.txt
> @@ -0,0 +1,73 @@
> +Synopsys DesignWare HDMI 2.0 TX encoder driver for ARC SoCs
> +================================
> +
> +The HDMI transmitter is a Synopsys DesignWare HDMI 2.0 TX controller IP
> +with a companion of Synopsys DesignWare HDMI 2.0 TX PHY IP.
> +
> +These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
> +Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt
> +with the following device-specific properties.
> +
> +
> +Required properties:
> +
> +- compatible : Shall contain
> + - "snps,dw-hdmi-hsdk" for HSDK4xD compatible HDMI TX
> +
> +- reg: See dw_hdmi.txt.
> +- interrupts: HDMI interrupt number.
> +- clocks: See dw_hdmi.txt.
> +- clock-names: Must contain "iahb" and "isfr" as defined in dw_hdmi.txt.
> +- ports: See dw_hdmi.txt. The DWC HDMI shall have one port numbered 0
> + corresponding to the video input of the controller and one port numbered 1
> + corresponding to its HDMI output.
> +
> +Example:
> +
> +hdmi: hdmi@0x10000 {
> + compatible = "snps,dw-hdmi-hsdk";
> + reg = <0x10000 0x10000>;
> + reg-io-width = <4>;
> + interrupts = <14>;
> + clocks = <&apbclk>, <&hdmi_pix_clk>;
> + clock-names = "iahb", "isfr";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + hdmi_enc_input: endpoint {
> + remote-endpoint = <&pgu_output>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + hdmi_enc_out: endpoint {
> + remote-endpoint = <&hdmi_con>;
> + };
> + };
> + };
> +};
> +
> +hdmi-out {
> + ...
> +
> + port {
> + hdmi_con: endpoint {
> + remote-endpoint = <&hdmi_enc_out>;
> + };
> + };
> +};
> +
> +pgu {
> + ...
> +
> + port_o: port {
> + pgu_output: endpoint {
> + remote-endpoint = <&hdmi_enc_input>;
> + };
> + };
> +};
> --
> 2.21.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc
WARNING: multiple messages have this Message-ID (diff)
From: Sam Ravnborg <sam@ravnborg.org>
To: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: dri-devel@lists.freedesktop.org,
Alexey Brodkin <Alexey.Brodkin@synopsys.com>,
devicetree@vger.kernel.org, David Airlie <airlied@linux.ie>,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
linux-snps-arc@lists.infradead.org
Subject: Re: [PATCH 2/2] dt-bindings: Document the Synopsys ARC HDMI TX bindings
Date: Mon, 16 Mar 2020 16:05:48 +0100 [thread overview]
Message-ID: <20200316150548.GA25294@ravnborg.org> (raw)
In-Reply-To: <20200316144647.10416-3-Eugeniy.Paltsev@synopsys.com>
Hi Eugeniy.
On Mon, Mar 16, 2020 at 05:46:47PM +0300, Eugeniy Paltsev wrote:
> This patch adds documentation of device tree bindings for the Synopsys
> HDMI 2.0 TX encoder driver for ARC SoCs.
>
> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> ---
> .../display/bridge/snps,arc-dw-hdmi.txt | 73 +++++++++++++++++++
New bindings in DT Schema format please (.yaml files).
We are working on migrating all bindings to DT Schema format.
Sam
> 1 file changed, 73 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.txt
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.txt
> new file mode 100644
> index 000000000000..d5e006b392cc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.txt
> @@ -0,0 +1,73 @@
> +Synopsys DesignWare HDMI 2.0 TX encoder driver for ARC SoCs
> +================================
> +
> +The HDMI transmitter is a Synopsys DesignWare HDMI 2.0 TX controller IP
> +with a companion of Synopsys DesignWare HDMI 2.0 TX PHY IP.
> +
> +These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
> +Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt
> +with the following device-specific properties.
> +
> +
> +Required properties:
> +
> +- compatible : Shall contain
> + - "snps,dw-hdmi-hsdk" for HSDK4xD compatible HDMI TX
> +
> +- reg: See dw_hdmi.txt.
> +- interrupts: HDMI interrupt number.
> +- clocks: See dw_hdmi.txt.
> +- clock-names: Must contain "iahb" and "isfr" as defined in dw_hdmi.txt.
> +- ports: See dw_hdmi.txt. The DWC HDMI shall have one port numbered 0
> + corresponding to the video input of the controller and one port numbered 1
> + corresponding to its HDMI output.
> +
> +Example:
> +
> +hdmi: hdmi@0x10000 {
> + compatible = "snps,dw-hdmi-hsdk";
> + reg = <0x10000 0x10000>;
> + reg-io-width = <4>;
> + interrupts = <14>;
> + clocks = <&apbclk>, <&hdmi_pix_clk>;
> + clock-names = "iahb", "isfr";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + hdmi_enc_input: endpoint {
> + remote-endpoint = <&pgu_output>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + hdmi_enc_out: endpoint {
> + remote-endpoint = <&hdmi_con>;
> + };
> + };
> + };
> +};
> +
> +hdmi-out {
> + ...
> +
> + port {
> + hdmi_con: endpoint {
> + remote-endpoint = <&hdmi_enc_out>;
> + };
> + };
> +};
> +
> +pgu {
> + ...
> +
> + port_o: port {
> + pgu_output: endpoint {
> + remote-endpoint = <&hdmi_enc_input>;
> + };
> + };
> +};
> --
> 2.21.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Sam Ravnborg <sam@ravnborg.org>
To: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: devicetree@vger.kernel.org, David Airlie <airlied@linux.ie>,
Alexey Brodkin <Alexey.Brodkin@synopsys.com>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Rob Herring <robh+dt@kernel.org>,
linux-snps-arc@lists.infradead.org
Subject: Re: [PATCH 2/2] dt-bindings: Document the Synopsys ARC HDMI TX bindings
Date: Mon, 16 Mar 2020 16:05:48 +0100 [thread overview]
Message-ID: <20200316150548.GA25294@ravnborg.org> (raw)
In-Reply-To: <20200316144647.10416-3-Eugeniy.Paltsev@synopsys.com>
Hi Eugeniy.
On Mon, Mar 16, 2020 at 05:46:47PM +0300, Eugeniy Paltsev wrote:
> This patch adds documentation of device tree bindings for the Synopsys
> HDMI 2.0 TX encoder driver for ARC SoCs.
>
> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> ---
> .../display/bridge/snps,arc-dw-hdmi.txt | 73 +++++++++++++++++++
New bindings in DT Schema format please (.yaml files).
We are working on migrating all bindings to DT Schema format.
Sam
> 1 file changed, 73 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.txt
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.txt
> new file mode 100644
> index 000000000000..d5e006b392cc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.txt
> @@ -0,0 +1,73 @@
> +Synopsys DesignWare HDMI 2.0 TX encoder driver for ARC SoCs
> +================================
> +
> +The HDMI transmitter is a Synopsys DesignWare HDMI 2.0 TX controller IP
> +with a companion of Synopsys DesignWare HDMI 2.0 TX PHY IP.
> +
> +These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
> +Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt
> +with the following device-specific properties.
> +
> +
> +Required properties:
> +
> +- compatible : Shall contain
> + - "snps,dw-hdmi-hsdk" for HSDK4xD compatible HDMI TX
> +
> +- reg: See dw_hdmi.txt.
> +- interrupts: HDMI interrupt number.
> +- clocks: See dw_hdmi.txt.
> +- clock-names: Must contain "iahb" and "isfr" as defined in dw_hdmi.txt.
> +- ports: See dw_hdmi.txt. The DWC HDMI shall have one port numbered 0
> + corresponding to the video input of the controller and one port numbered 1
> + corresponding to its HDMI output.
> +
> +Example:
> +
> +hdmi: hdmi@0x10000 {
> + compatible = "snps,dw-hdmi-hsdk";
> + reg = <0x10000 0x10000>;
> + reg-io-width = <4>;
> + interrupts = <14>;
> + clocks = <&apbclk>, <&hdmi_pix_clk>;
> + clock-names = "iahb", "isfr";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + hdmi_enc_input: endpoint {
> + remote-endpoint = <&pgu_output>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + hdmi_enc_out: endpoint {
> + remote-endpoint = <&hdmi_con>;
> + };
> + };
> + };
> +};
> +
> +hdmi-out {
> + ...
> +
> + port {
> + hdmi_con: endpoint {
> + remote-endpoint = <&hdmi_enc_out>;
> + };
> + };
> +};
> +
> +pgu {
> + ...
> +
> + port_o: port {
> + pgu_output: endpoint {
> + remote-endpoint = <&hdmi_enc_input>;
> + };
> + };
> +};
> --
> 2.21.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-03-16 15:08 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-16 14:46 [PATCH 0/2] DRM: ARC: add HDMI 2.0 TX encoder support Eugeniy Paltsev
2020-03-16 14:46 ` Eugeniy Paltsev
2020-03-16 14:46 ` Eugeniy Paltsev
2020-03-16 14:46 ` [PATCH 1/2] " Eugeniy Paltsev
2020-03-16 14:46 ` Eugeniy Paltsev
2020-03-16 14:46 ` Eugeniy Paltsev
2020-03-16 14:46 ` [PATCH 2/2] dt-bindings: Document the Synopsys ARC HDMI TX bindings Eugeniy Paltsev
2020-03-16 14:46 ` Eugeniy Paltsev
2020-03-16 14:46 ` Eugeniy Paltsev
2020-03-16 15:05 ` Sam Ravnborg [this message]
2020-03-16 15:05 ` Sam Ravnborg
2020-03-16 15:05 ` Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200316150548.GA25294@ravnborg.org \
--to=sam@ravnborg.org \
--cc=Alexey.Brodkin@synopsys.com \
--cc=Eugeniy.Paltsev@synopsys.com \
--cc=airlied@linux.ie \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-snps-arc@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.