From: Eddie James <eajames@linux.ibm.com>
To: openbmc@lists.ozlabs.org
Subject: [PATCH linux dev-5.4 05/16] dt-bindings: soc: Add Aspeed XDMA Engine
Date: Tue, 17 Mar 2020 17:13:25 -0500 [thread overview]
Message-ID: <20200317221336.19973-6-eajames@linux.ibm.com> (raw)
In-Reply-To: <20200317221336.19973-1-eajames@linux.ibm.com>
Document the bindings for the Aspeed AST25XX and AST26XX XDMA engine.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/soc/aspeed/xdma.txt | 40 +++++++++++++++++++
MAINTAINERS | 6 +++
2 files changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/aspeed/xdma.txt
diff --git a/Documentation/devicetree/bindings/soc/aspeed/xdma.txt b/Documentation/devicetree/bindings/soc/aspeed/xdma.txt
new file mode 100644
index 000000000000..074bda546e2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/aspeed/xdma.txt
@@ -0,0 +1,40 @@
+Aspeed AST25XX and AST26XX XDMA Engine
+
+The XDMA Engine embedded in the AST2500 and AST2600 SOCs can perform automatic
+DMA operations over PCI between the SOC (acting as a BMC) and a host processor.
+
+Required properties:
+ - compatible : must be "aspeed,ast2500-xdma" or
+ "aspeed,ast2600-xdma"
+ - reg : contains the address and size of the memory region
+ associated with the XDMA engine registers
+ - clocks : clock specifier for the clock associated with the
+ XDMA engine
+ - resets : reset specifier for the syscon reset associated with
+ the XDMA engine
+ - interrupts-extended : two interrupt cells; the first specifies the global
+ interrupt for the XDMA engine and the second
+ specifies the PCI-E reset or PERST interrupt.
+ - aspeed,scu : a phandle to the syscon node for the system control
+ unit of the SOC
+ - memory : contains the address and size of the memory area to
+ be used by the XDMA engine for DMA operations
+
+Optional properties:
+ - pcie-device : should be either "bmc" or "vga", corresponding to
+ which device should be used by the XDMA engine for
+ DMA operations. If this property is not set, the XDMA
+ engine will use the BMC PCI-E device.
+
+Example:
+
+ xdma@1e6e7000 {
+ compatible = "aspeed,ast2500-xdma";
+ reg = <0x1e6e7000 0x100>;
+ clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+ resets = <&syscon ASPEED_RESET_XDMA>;
+ interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>;
+ aspeed,scu = <&syscon>;
+ pcie-device = "bmc";
+ memory = <0x9f000000 0x01000000>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index be086561c694..01bd161f1d56 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2665,6 +2665,12 @@ S: Maintained
F: drivers/media/platform/aspeed-video.c
F: Documentation/devicetree/bindings/media/aspeed-video.txt
+ASPEED XDMA ENGINE DRIVER
+M: Eddie James <eajames@linux.ibm.com>
+L: linux-aspeed@lists.ozlabs.org (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/soc/aspeed/xdma.txt
+
ASUS NOTEBOOKS AND EEEPC ACPI/WMI EXTRAS DRIVERS
M: Corentin Chary <corentin.chary@gmail.com>
L: acpi4asus-user@lists.sourceforge.net
--
2.24.0
next prev parent reply other threads:[~2020-03-17 22:13 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-17 22:13 [PATCH linux dev-5.4 00/16] Aspeed: Add XDMA and SCU interrupt controller drivers Eddie James
2020-03-17 22:13 ` [PATCH linux dev-5.4 01/16] dt-bindings: interrupt-controller: Add Aspeed SCU interrupt controller Eddie James
2020-03-17 22:13 ` [PATCH linux dev-5.4 02/16] irqchip: " Eddie James
2020-03-17 22:13 ` [PATCH linux dev-5.4 03/16] ARM: dts: aspeed: ast2500: Add " Eddie James
2020-03-17 22:13 ` [PATCH linux dev-5.4 04/16] ARM: dts: aspeed: ast2600: Add SCU interrupt controllers Eddie James
2020-03-17 22:13 ` Eddie James [this message]
2020-03-17 22:13 ` [PATCH linux dev-5.4 06/16] soc: aspeed: Add XDMA Engine Driver Eddie James
2020-03-17 22:13 ` [PATCH linux dev-5.4 07/16] soc: aspeed: xdma: Add user interface Eddie James
2020-03-17 22:13 ` [PATCH linux dev-5.4 08/16] soc: aspeed: xdma: Add reset ioctl Eddie James
2020-03-17 22:13 ` [PATCH linux dev-5.4 09/16] ARM: dts: aspeed: ast2500: Add XDMA Engine Eddie James
2020-03-17 22:13 ` [PATCH linux dev-5.4 10/16] ARM: dts: aspeed: ast2600: " Eddie James
2020-03-17 22:13 ` [PATCH linux dev-5.4 11/16] ARM: dts: aspeed: witherspoon: Enable " Eddie James
2020-03-17 22:13 ` [PATCH linux dev-5.4 12/16] ARM: dts: aspeed: tacoma: Enable XDMA engine Eddie James
2020-03-17 22:13 ` [PATCH linux dev-5.4 13/16] soc: aspeed: xdma: Add memory controller configuration Eddie James
2020-03-17 22:13 ` [PATCH linux dev-5.4 14/16] soc: aspeed: xdma: Add root complex reset Eddie James
2020-03-17 22:13 ` [PATCH linux dev-5.4 15/16] soc: aspeed: xdma: Disable PCI AHB bridge during probe Eddie James
2020-03-17 22:13 ` [PATCH linux dev-5.4 16/16] soc: aspeed: xdma: Fix BMC PCI device class and revision for AST2600 Eddie James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200317221336.19973-6-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=openbmc@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.