[PATCH v5 04/12] spi: spi-fsl-dspi: Avoid reading more data than written in EOQ mode

[Vladimir Oltean <olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

From: Vladimir Oltean <vladimir.oltean-3arQi8VN3Tc@public.gmane.org>

If dspi->words_in_flight is populated with the hardware FIFO size,
then in dspi_fifo_read it will attempt to read more data at the end of a
buffer that is not a multiple of 16 bytes in length. It will probably
time out attempting to do so.

So limit the num_fifo_entries variable to the actual number of FIFO
entries that is going to be used.

Fixes: d59c90a2400f ("spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode")
Signed-off-by: Vladimir Oltean <vladimir.oltean-3arQi8VN3Tc@public.gmane.org>
---
Changes in v5:
None.

Changes in v4:
Patch is new.

 drivers/spi/spi-fsl-dspi.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 8f2b73cc6ed7..51224b772680 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -739,13 +739,16 @@ static void dspi_eoq_fifo_write(struct fsl_dspi *dspi)
 	int num_fifo_entries = dspi->devtype_data->fifo_size;
 	u16 xfer_cmd = dspi->tx_cmd;
 
+	if (num_fifo_entries * dspi->oper_word_size > dspi->len)
+		num_fifo_entries = dspi->len / dspi->oper_word_size;
+
 	dspi->words_in_flight = num_fifo_entries;
 
 	/* Fill TX FIFO with as many transfers as possible */
-	while (dspi->len && num_fifo_entries--) {
+	while (num_fifo_entries--) {
 		dspi->tx_cmd = xfer_cmd;
 		/* Request EOQF for last transfer in FIFO */
-		if (dspi->len == dspi->oper_word_size || num_fifo_entries == 0)
+		if (num_fifo_entries == 0)
 			dspi->tx_cmd |= SPI_PUSHR_CMD_EOQ;
 		/* Write combined TX FIFO and CMD FIFO entry */
 		dspi_pushr_write(dspi);
-- 
2.17.1