From: Paul Mackerras <paulus@ozlabs.org>
To: Gustavo Romero <gromero@linux.ibm.com>
Cc: leonardo@linux.ibm.com, mikey@neuling.org,
linuxppc-dev@lists.ozlabs.org, kvm-ppc@vger.kernel.org
Subject: Re: [PATCH v3] KVM: PPC: Book3S HV: Treat TM-related invalid form instructions on P9 like the valid
Date: Thu, 19 Mar 2020 23:32:20 +0000 [thread overview]
Message-ID: <20200319233220.GC3260@blackberry> (raw)
In-Reply-To: <20200221162950.132860-1-gromero@linux.ibm.com>
On Fri, Feb 21, 2020 at 11:29:50AM -0500, Gustavo Romero wrote:
> On P9 DD2.2 due to a CPU defect some TM instructions need to be emulated by
> KVM. This is handled at first by the hardware raising a softpatch interrupt
> when certain TM instructions that need KVM assistance are executed in the
> guest. Althought some TM instructions per Power ISA are invalid forms they
> can raise a softpatch interrupt too. For instance, 'tresume.' instruction
> as defined in the ISA must have bit 31 set (1), but an instruction that
> matches 'tresume.' PO and XO opcode fields but has bit 31 not set (0), like
> 0x7cfe9ddc, also raises a softpatch interrupt. Similarly for 'treclaim.'
> and 'trechkpt.' instructions with bit 31 = 0, i.e. 0x7c00075c and
> 0x7c0007dc, respectively. Hence, if a code like the following is executed
> in the guest it will raise a softpatch interrupt just like a 'tresume.'
> when the TM facility is enabled ('tabort. 0' in the example is used only
> to enable the TM facility):
>
> int main() { asm("tabort. 0; .long 0x7cfe9ddc;"); }
>
> Currently in such a case KVM throws a complete trace like:
>
> [345523.705984] WARNING: CPU: 24 PID: 64413 at arch/powerpc/kvm/book3s_hv_tm.c:211 kvmhv_p9_tm_emulation+0x68/0x620 [kvm_hv]
> [345523.705985] Modules linked in: kvm_hv(E) xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp ip6table_mangle ip6table_nat
> iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ebtable_filter ebtables ip6table_filter
> ip6_tables iptable_filter bridge stp llc sch_fq_codel ipmi_powernv at24 vmx_crypto ipmi_devintf ipmi_msghandler
> ibmpowernv uio_pdrv_genirq kvm opal_prd uio leds_powernv ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp
> libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456
> async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor raid6_pq raid1 raid0 multipath linear tg3
> crct10dif_vpmsum crc32c_vpmsum ipr [last unloaded: kvm_hv]
> [345523.706030] CPU: 24 PID: 64413 Comm: CPU 0/KVM Tainted: G W E 5.5.0+ #1
> [345523.706031] NIP: c0080000072cb9c0 LR: c0080000072b5e80 CTR: c0080000085c7850
> [345523.706034] REGS: c000000399467680 TRAP: 0700 Tainted: G W E (5.5.0+)
> [345523.706034] MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 24022428 XER: 00000000
> [345523.706042] CFAR: c0080000072b5e7c IRQMASK: 0
> GPR00: c0080000072b5e80 c000000399467910 c0080000072db500 c000000375ccc720
> GPR04: c000000375ccc720 00000003fbec0000 0000a10395dda5a6 0000000000000000
> GPR08: 000000007cfe9ddc 7cfe9ddc000005dc 7cfe9ddc7c0005dc c0080000072cd530
> GPR12: c0080000085c7850 c0000003fffeb800 0000000000000001 00007dfb737f0000
> GPR16: c0002001edcca558 0000000000000000 0000000000000000 0000000000000001
> GPR20: c000000001b21258 c0002001edcca558 0000000000000018 0000000000000000
> GPR24: 0000000001000000 ffffffffffffffff 0000000000000001 0000000000001500
> GPR28: c0002001edcc4278 c00000037dd80000 800000050280f033 c000000375ccc720
> [345523.706062] NIP [c0080000072cb9c0] kvmhv_p9_tm_emulation+0x68/0x620 [kvm_hv]
> [345523.706065] LR [c0080000072b5e80] kvmppc_handle_exit_hv.isra.53+0x3e8/0x798 [kvm_hv]
> [345523.706066] Call Trace:
> [345523.706069] [c000000399467910] [c000000399467940] 0xc000000399467940 (unreliable)
> [345523.706071] [c000000399467950] [c000000399467980] 0xc000000399467980
> [345523.706075] [c0000003994679f0] [c0080000072bd1c4] kvmhv_run_single_vcpu+0xa1c/0xb80 [kvm_hv]
> [345523.706079] [c000000399467ac0] [c0080000072bd8e0] kvmppc_vcpu_run_hv+0x5b8/0xb00 [kvm_hv]
> [345523.706087] [c000000399467b90] [c0080000085c93cc] kvmppc_vcpu_run+0x34/0x48 [kvm]
> [345523.706095] [c000000399467bb0] [c0080000085c582c] kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm]
> [345523.706101] [c000000399467c40] [c0080000085b7498] kvm_vcpu_ioctl+0x3d0/0x7b0 [kvm]
> [345523.706105] [c000000399467db0] [c0000000004adf9c] ksys_ioctl+0x13c/0x170
> [345523.706107] [c000000399467e00] [c0000000004adff8] sys_ioctl+0x28/0x80
> [345523.706111] [c000000399467e20] [c00000000000b278] system_call+0x5c/0x68
> [345523.706112] Instruction dump:
> [345523.706114] 419e0390 7f8a4840 409d0048 6d497c00 2f89075d 419e021c 6d497c00 2f8907dd
> [345523.706119] 419e01c0 6d497c00 2f8905dd 419e00a4 <0fe00000> 38210040 38600000 ebc1fff0
>
> and then treats the executed instruction as a 'nop'.
>
> However the POWER9 User's Manual, in section "4.6.10 Book II Invalid
> Forms", informs that for TM instructions bit 31 is in fact ignored, thus
> for the TM-related invalid forms ignoring bit 31 and handling them like the
> valid forms is an acceptable way to handle them. POWER8 behaves the same
> way too.
>
> This commit changes the handling of the cases here described by treating
> the TM-related invalid forms that can generate a softpatch interrupt
> just like their valid forms (w/ bit 31 = 1) instead of as a 'nop' and by
> gently reporting any other unrecognized case to the host and treating it as
> illegal instruction instead of throwing a trace and treating it as a 'nop'.
>
> Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
> Acked-By: Michael Neuling <mikey@neuling.org>
> Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com>
Thanks, applied to my kvm-ppc-next branch.
Paul.
WARNING: multiple messages have this Message-ID (diff)
From: Paul Mackerras <paulus@ozlabs.org>
To: Gustavo Romero <gromero@linux.ibm.com>
Cc: leonardo@linux.ibm.com, mikey@neuling.org,
linuxppc-dev@lists.ozlabs.org, kvm-ppc@vger.kernel.org
Subject: Re: [PATCH v3] KVM: PPC: Book3S HV: Treat TM-related invalid form instructions on P9 like the valid ones
Date: Fri, 20 Mar 2020 10:32:20 +1100 [thread overview]
Message-ID: <20200319233220.GC3260@blackberry> (raw)
In-Reply-To: <20200221162950.132860-1-gromero@linux.ibm.com>
On Fri, Feb 21, 2020 at 11:29:50AM -0500, Gustavo Romero wrote:
> On P9 DD2.2 due to a CPU defect some TM instructions need to be emulated by
> KVM. This is handled at first by the hardware raising a softpatch interrupt
> when certain TM instructions that need KVM assistance are executed in the
> guest. Althought some TM instructions per Power ISA are invalid forms they
> can raise a softpatch interrupt too. For instance, 'tresume.' instruction
> as defined in the ISA must have bit 31 set (1), but an instruction that
> matches 'tresume.' PO and XO opcode fields but has bit 31 not set (0), like
> 0x7cfe9ddc, also raises a softpatch interrupt. Similarly for 'treclaim.'
> and 'trechkpt.' instructions with bit 31 = 0, i.e. 0x7c00075c and
> 0x7c0007dc, respectively. Hence, if a code like the following is executed
> in the guest it will raise a softpatch interrupt just like a 'tresume.'
> when the TM facility is enabled ('tabort. 0' in the example is used only
> to enable the TM facility):
>
> int main() { asm("tabort. 0; .long 0x7cfe9ddc;"); }
>
> Currently in such a case KVM throws a complete trace like:
>
> [345523.705984] WARNING: CPU: 24 PID: 64413 at arch/powerpc/kvm/book3s_hv_tm.c:211 kvmhv_p9_tm_emulation+0x68/0x620 [kvm_hv]
> [345523.705985] Modules linked in: kvm_hv(E) xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp ip6table_mangle ip6table_nat
> iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ebtable_filter ebtables ip6table_filter
> ip6_tables iptable_filter bridge stp llc sch_fq_codel ipmi_powernv at24 vmx_crypto ipmi_devintf ipmi_msghandler
> ibmpowernv uio_pdrv_genirq kvm opal_prd uio leds_powernv ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp
> libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456
> async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor raid6_pq raid1 raid0 multipath linear tg3
> crct10dif_vpmsum crc32c_vpmsum ipr [last unloaded: kvm_hv]
> [345523.706030] CPU: 24 PID: 64413 Comm: CPU 0/KVM Tainted: G W E 5.5.0+ #1
> [345523.706031] NIP: c0080000072cb9c0 LR: c0080000072b5e80 CTR: c0080000085c7850
> [345523.706034] REGS: c000000399467680 TRAP: 0700 Tainted: G W E (5.5.0+)
> [345523.706034] MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 24022428 XER: 00000000
> [345523.706042] CFAR: c0080000072b5e7c IRQMASK: 0
> GPR00: c0080000072b5e80 c000000399467910 c0080000072db500 c000000375ccc720
> GPR04: c000000375ccc720 00000003fbec0000 0000a10395dda5a6 0000000000000000
> GPR08: 000000007cfe9ddc 7cfe9ddc000005dc 7cfe9ddc7c0005dc c0080000072cd530
> GPR12: c0080000085c7850 c0000003fffeb800 0000000000000001 00007dfb737f0000
> GPR16: c0002001edcca558 0000000000000000 0000000000000000 0000000000000001
> GPR20: c000000001b21258 c0002001edcca558 0000000000000018 0000000000000000
> GPR24: 0000000001000000 ffffffffffffffff 0000000000000001 0000000000001500
> GPR28: c0002001edcc4278 c00000037dd80000 800000050280f033 c000000375ccc720
> [345523.706062] NIP [c0080000072cb9c0] kvmhv_p9_tm_emulation+0x68/0x620 [kvm_hv]
> [345523.706065] LR [c0080000072b5e80] kvmppc_handle_exit_hv.isra.53+0x3e8/0x798 [kvm_hv]
> [345523.706066] Call Trace:
> [345523.706069] [c000000399467910] [c000000399467940] 0xc000000399467940 (unreliable)
> [345523.706071] [c000000399467950] [c000000399467980] 0xc000000399467980
> [345523.706075] [c0000003994679f0] [c0080000072bd1c4] kvmhv_run_single_vcpu+0xa1c/0xb80 [kvm_hv]
> [345523.706079] [c000000399467ac0] [c0080000072bd8e0] kvmppc_vcpu_run_hv+0x5b8/0xb00 [kvm_hv]
> [345523.706087] [c000000399467b90] [c0080000085c93cc] kvmppc_vcpu_run+0x34/0x48 [kvm]
> [345523.706095] [c000000399467bb0] [c0080000085c582c] kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm]
> [345523.706101] [c000000399467c40] [c0080000085b7498] kvm_vcpu_ioctl+0x3d0/0x7b0 [kvm]
> [345523.706105] [c000000399467db0] [c0000000004adf9c] ksys_ioctl+0x13c/0x170
> [345523.706107] [c000000399467e00] [c0000000004adff8] sys_ioctl+0x28/0x80
> [345523.706111] [c000000399467e20] [c00000000000b278] system_call+0x5c/0x68
> [345523.706112] Instruction dump:
> [345523.706114] 419e0390 7f8a4840 409d0048 6d497c00 2f89075d 419e021c 6d497c00 2f8907dd
> [345523.706119] 419e01c0 6d497c00 2f8905dd 419e00a4 <0fe00000> 38210040 38600000 ebc1fff0
>
> and then treats the executed instruction as a 'nop'.
>
> However the POWER9 User's Manual, in section "4.6.10 Book II Invalid
> Forms", informs that for TM instructions bit 31 is in fact ignored, thus
> for the TM-related invalid forms ignoring bit 31 and handling them like the
> valid forms is an acceptable way to handle them. POWER8 behaves the same
> way too.
>
> This commit changes the handling of the cases here described by treating
> the TM-related invalid forms that can generate a softpatch interrupt
> just like their valid forms (w/ bit 31 = 1) instead of as a 'nop' and by
> gently reporting any other unrecognized case to the host and treating it as
> illegal instruction instead of throwing a trace and treating it as a 'nop'.
>
> Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
> Acked-By: Michael Neuling <mikey@neuling.org>
> Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com>
Thanks, applied to my kvm-ppc-next branch.
Paul.
next prev parent reply other threads:[~2020-03-19 23:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-21 16:29 [PATCH v3] KVM: PPC: Book3S HV: Treat TM-related invalid form instructions on P9 like the valid ones Gustavo Romero
2020-02-21 16:29 ` Gustavo Romero
2020-03-19 23:32 ` Paul Mackerras [this message]
2020-03-19 23:32 ` Paul Mackerras
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200319233220.GC3260@blackberry \
--to=paulus@ozlabs.org \
--cc=gromero@linux.ibm.com \
--cc=kvm-ppc@vger.kernel.org \
--cc=leonardo@linux.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mikey@neuling.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.