From: Eric Biggers <ebiggers@kernel.org>
To: cluster-devel.redhat.com
Subject: [Cluster-devel] [PATCH v9 12/25] mm: Move end_index check out of readahead loop
Date: Fri, 20 Mar 2020 11:00:17 -0700 [thread overview]
Message-ID: <20200320180017.GE851@sol.localdomain> (raw)
In-Reply-To: <20200320173040.GB4971@bombadil.infradead.org>
On Fri, Mar 20, 2020 at 10:30:40AM -0700, Matthew Wilcox wrote:
> On Fri, Mar 20, 2020 at 09:58:28AM -0700, Eric Biggers wrote:
> > On Fri, Mar 20, 2020 at 07:22:18AM -0700, Matthew Wilcox wrote:
> > > + /* Avoid wrapping to the beginning of the file */
> > > + if (index + nr_to_read < index)
> > > + nr_to_read = ULONG_MAX - index + 1;
> > > + /* Don't read past the page containing the last byte of the file */
> > > + if (index + nr_to_read >= end_index)
> > > + nr_to_read = end_index - index + 1;
> >
> > There seem to be a couple off-by-one errors here. Shouldn't it be:
> >
> > /* Avoid wrapping to the beginning of the file */
> > if (index + nr_to_read < index)
> > nr_to_read = ULONG_MAX - index;
>
> I think it's right. Imagine that index is ULONG_MAX. We should read one
> page (the one at ULONG_MAX). That would be ULONG_MAX - ULONG_MAX + 1.
>
> > /* Don't read past the page containing the last byte of the file */
> > if (index + nr_to_read > end_index)
> > nr_to_read = end_index - index + 1;
> >
> > I.e., 'ULONG_MAX - index' rather than 'ULONG_MAX - index + 1', so that
> > 'index + nr_to_read' is then ULONG_MAX rather than overflowed to 0.
> >
> > Then 'index + nr_to_read > end_index' rather 'index + nr_to_read >= end_index',
> > since otherwise nr_to_read can be increased by 1 rather than decreased or stay
> > the same as expected.
>
> Ooh, I missed the overflow case here. It should be:
>
> + if (index + nr_to_read - 1 > end_index)
> + nr_to_read = end_index - index + 1;
>
But then if someone passes index=0 and nr_to_read=0, this underflows and the
entire file gets read.
The page cache isn't actually supposed to contain a page at index ULONG_MAX,
since MAX_LFS_FILESIZE is at most ((loff_t)ULONG_MAX << PAGE_SHIFT), right? So
I don't think we need to worry about reading the page with index ULONG_MAX.
I.e. I think it's fine to limit nr_to_read to 'ULONG_MAX - index', if that makes
it easier to avoid an overflow or underflow in the next check.
- Eric
WARNING: multiple messages have this Message-ID (diff)
From: Eric Biggers <ebiggers@kernel.org>
To: Matthew Wilcox <willy@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
linux-xfs@vger.kernel.org,
William Kucharski <william.kucharski@oracle.com>,
John Hubbard <jhubbard@nvidia.com>,
linux-kernel@vger.kernel.org,
linux-f2fs-devel@lists.sourceforge.net, cluster-devel@redhat.com,
linux-mm@kvack.org, ocfs2-devel@oss.oracle.com,
linux-fsdevel@vger.kernel.org, linux-ext4@vger.kernel.org,
linux-erofs@lists.ozlabs.org, linux-btrfs@vger.kernel.org
Subject: Re: [PATCH v9 12/25] mm: Move end_index check out of readahead loop
Date: Fri, 20 Mar 2020 11:00:17 -0700 [thread overview]
Message-ID: <20200320180017.GE851@sol.localdomain> (raw)
In-Reply-To: <20200320173040.GB4971@bombadil.infradead.org>
On Fri, Mar 20, 2020 at 10:30:40AM -0700, Matthew Wilcox wrote:
> On Fri, Mar 20, 2020 at 09:58:28AM -0700, Eric Biggers wrote:
> > On Fri, Mar 20, 2020 at 07:22:18AM -0700, Matthew Wilcox wrote:
> > > + /* Avoid wrapping to the beginning of the file */
> > > + if (index + nr_to_read < index)
> > > + nr_to_read = ULONG_MAX - index + 1;
> > > + /* Don't read past the page containing the last byte of the file */
> > > + if (index + nr_to_read >= end_index)
> > > + nr_to_read = end_index - index + 1;
> >
> > There seem to be a couple off-by-one errors here. Shouldn't it be:
> >
> > /* Avoid wrapping to the beginning of the file */
> > if (index + nr_to_read < index)
> > nr_to_read = ULONG_MAX - index;
>
> I think it's right. Imagine that index is ULONG_MAX. We should read one
> page (the one at ULONG_MAX). That would be ULONG_MAX - ULONG_MAX + 1.
>
> > /* Don't read past the page containing the last byte of the file */
> > if (index + nr_to_read > end_index)
> > nr_to_read = end_index - index + 1;
> >
> > I.e., 'ULONG_MAX - index' rather than 'ULONG_MAX - index + 1', so that
> > 'index + nr_to_read' is then ULONG_MAX rather than overflowed to 0.
> >
> > Then 'index + nr_to_read > end_index' rather 'index + nr_to_read >= end_index',
> > since otherwise nr_to_read can be increased by 1 rather than decreased or stay
> > the same as expected.
>
> Ooh, I missed the overflow case here. It should be:
>
> + if (index + nr_to_read - 1 > end_index)
> + nr_to_read = end_index - index + 1;
>
But then if someone passes index=0 and nr_to_read=0, this underflows and the
entire file gets read.
The page cache isn't actually supposed to contain a page at index ULONG_MAX,
since MAX_LFS_FILESIZE is at most ((loff_t)ULONG_MAX << PAGE_SHIFT), right? So
I don't think we need to worry about reading the page with index ULONG_MAX.
I.e. I think it's fine to limit nr_to_read to 'ULONG_MAX - index', if that makes
it easier to avoid an overflow or underflow in the next check.
- Eric
WARNING: multiple messages have this Message-ID (diff)
From: Eric Biggers <ebiggers@kernel.org>
To: Matthew Wilcox <willy@infradead.org>
Cc: cluster-devel@redhat.com, linux-mm@kvack.org,
John Hubbard <jhubbard@nvidia.com>,
linux-kernel@vger.kernel.org,
linux-f2fs-devel@lists.sourceforge.net,
linux-xfs@vger.kernel.org,
William Kucharski <william.kucharski@oracle.com>,
linux-btrfs@vger.kernel.org, linux-fsdevel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
linux-ext4@vger.kernel.org, linux-erofs@lists.ozlabs.org,
ocfs2-devel@oss.oracle.com
Subject: Re: [PATCH v9 12/25] mm: Move end_index check out of readahead loop
Date: Fri, 20 Mar 2020 11:00:17 -0700 [thread overview]
Message-ID: <20200320180017.GE851@sol.localdomain> (raw)
In-Reply-To: <20200320173040.GB4971@bombadil.infradead.org>
On Fri, Mar 20, 2020 at 10:30:40AM -0700, Matthew Wilcox wrote:
> On Fri, Mar 20, 2020 at 09:58:28AM -0700, Eric Biggers wrote:
> > On Fri, Mar 20, 2020 at 07:22:18AM -0700, Matthew Wilcox wrote:
> > > + /* Avoid wrapping to the beginning of the file */
> > > + if (index + nr_to_read < index)
> > > + nr_to_read = ULONG_MAX - index + 1;
> > > + /* Don't read past the page containing the last byte of the file */
> > > + if (index + nr_to_read >= end_index)
> > > + nr_to_read = end_index - index + 1;
> >
> > There seem to be a couple off-by-one errors here. Shouldn't it be:
> >
> > /* Avoid wrapping to the beginning of the file */
> > if (index + nr_to_read < index)
> > nr_to_read = ULONG_MAX - index;
>
> I think it's right. Imagine that index is ULONG_MAX. We should read one
> page (the one at ULONG_MAX). That would be ULONG_MAX - ULONG_MAX + 1.
>
> > /* Don't read past the page containing the last byte of the file */
> > if (index + nr_to_read > end_index)
> > nr_to_read = end_index - index + 1;
> >
> > I.e., 'ULONG_MAX - index' rather than 'ULONG_MAX - index + 1', so that
> > 'index + nr_to_read' is then ULONG_MAX rather than overflowed to 0.
> >
> > Then 'index + nr_to_read > end_index' rather 'index + nr_to_read >= end_index',
> > since otherwise nr_to_read can be increased by 1 rather than decreased or stay
> > the same as expected.
>
> Ooh, I missed the overflow case here. It should be:
>
> + if (index + nr_to_read - 1 > end_index)
> + nr_to_read = end_index - index + 1;
>
But then if someone passes index=0 and nr_to_read=0, this underflows and the
entire file gets read.
The page cache isn't actually supposed to contain a page at index ULONG_MAX,
since MAX_LFS_FILESIZE is at most ((loff_t)ULONG_MAX << PAGE_SHIFT), right? So
I don't think we need to worry about reading the page with index ULONG_MAX.
I.e. I think it's fine to limit nr_to_read to 'ULONG_MAX - index', if that makes
it easier to avoid an overflow or underflow in the next check.
- Eric
WARNING: multiple messages have this Message-ID (diff)
From: Eric Biggers <ebiggers@kernel.org>
To: Matthew Wilcox <willy@infradead.org>
Cc: cluster-devel@redhat.com, linux-mm@kvack.org,
John Hubbard <jhubbard@nvidia.com>,
linux-kernel@vger.kernel.org,
linux-f2fs-devel@lists.sourceforge.net,
linux-xfs@vger.kernel.org,
William Kucharski <william.kucharski@oracle.com>,
linux-btrfs@vger.kernel.org, linux-fsdevel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
linux-ext4@vger.kernel.org, linux-erofs@lists.ozlabs.org,
ocfs2-devel@oss.oracle.com
Subject: Re: [f2fs-dev] [PATCH v9 12/25] mm: Move end_index check out of readahead loop
Date: Fri, 20 Mar 2020 11:00:17 -0700 [thread overview]
Message-ID: <20200320180017.GE851@sol.localdomain> (raw)
In-Reply-To: <20200320173040.GB4971@bombadil.infradead.org>
On Fri, Mar 20, 2020 at 10:30:40AM -0700, Matthew Wilcox wrote:
> On Fri, Mar 20, 2020 at 09:58:28AM -0700, Eric Biggers wrote:
> > On Fri, Mar 20, 2020 at 07:22:18AM -0700, Matthew Wilcox wrote:
> > > + /* Avoid wrapping to the beginning of the file */
> > > + if (index + nr_to_read < index)
> > > + nr_to_read = ULONG_MAX - index + 1;
> > > + /* Don't read past the page containing the last byte of the file */
> > > + if (index + nr_to_read >= end_index)
> > > + nr_to_read = end_index - index + 1;
> >
> > There seem to be a couple off-by-one errors here. Shouldn't it be:
> >
> > /* Avoid wrapping to the beginning of the file */
> > if (index + nr_to_read < index)
> > nr_to_read = ULONG_MAX - index;
>
> I think it's right. Imagine that index is ULONG_MAX. We should read one
> page (the one at ULONG_MAX). That would be ULONG_MAX - ULONG_MAX + 1.
>
> > /* Don't read past the page containing the last byte of the file */
> > if (index + nr_to_read > end_index)
> > nr_to_read = end_index - index + 1;
> >
> > I.e., 'ULONG_MAX - index' rather than 'ULONG_MAX - index + 1', so that
> > 'index + nr_to_read' is then ULONG_MAX rather than overflowed to 0.
> >
> > Then 'index + nr_to_read > end_index' rather 'index + nr_to_read >= end_index',
> > since otherwise nr_to_read can be increased by 1 rather than decreased or stay
> > the same as expected.
>
> Ooh, I missed the overflow case here. It should be:
>
> + if (index + nr_to_read - 1 > end_index)
> + nr_to_read = end_index - index + 1;
>
But then if someone passes index=0 and nr_to_read=0, this underflows and the
entire file gets read.
The page cache isn't actually supposed to contain a page at index ULONG_MAX,
since MAX_LFS_FILESIZE is at most ((loff_t)ULONG_MAX << PAGE_SHIFT), right? So
I don't think we need to worry about reading the page with index ULONG_MAX.
I.e. I think it's fine to limit nr_to_read to 'ULONG_MAX - index', if that makes
it easier to avoid an overflow or underflow in the next check.
- Eric
_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
WARNING: multiple messages have this Message-ID (diff)
From: Eric Biggers <ebiggers@kernel.org>
To: ocfs2-devel@oss.oracle.com
Subject: [Ocfs2-devel] [PATCH v9 12/25] mm: Move end_index check out of readahead loop
Date: Fri, 20 Mar 2020 11:00:17 -0700 [thread overview]
Message-ID: <20200320180017.GE851@sol.localdomain> (raw)
In-Reply-To: <20200320173040.GB4971@bombadil.infradead.org>
On Fri, Mar 20, 2020 at 10:30:40AM -0700, Matthew Wilcox wrote:
> On Fri, Mar 20, 2020 at 09:58:28AM -0700, Eric Biggers wrote:
> > On Fri, Mar 20, 2020 at 07:22:18AM -0700, Matthew Wilcox wrote:
> > > + /* Avoid wrapping to the beginning of the file */
> > > + if (index + nr_to_read < index)
> > > + nr_to_read = ULONG_MAX - index + 1;
> > > + /* Don't read past the page containing the last byte of the file */
> > > + if (index + nr_to_read >= end_index)
> > > + nr_to_read = end_index - index + 1;
> >
> > There seem to be a couple off-by-one errors here. Shouldn't it be:
> >
> > /* Avoid wrapping to the beginning of the file */
> > if (index + nr_to_read < index)
> > nr_to_read = ULONG_MAX - index;
>
> I think it's right. Imagine that index is ULONG_MAX. We should read one
> page (the one at ULONG_MAX). That would be ULONG_MAX - ULONG_MAX + 1.
>
> > /* Don't read past the page containing the last byte of the file */
> > if (index + nr_to_read > end_index)
> > nr_to_read = end_index - index + 1;
> >
> > I.e., 'ULONG_MAX - index' rather than 'ULONG_MAX - index + 1', so that
> > 'index + nr_to_read' is then ULONG_MAX rather than overflowed to 0.
> >
> > Then 'index + nr_to_read > end_index' rather 'index + nr_to_read >= end_index',
> > since otherwise nr_to_read can be increased by 1 rather than decreased or stay
> > the same as expected.
>
> Ooh, I missed the overflow case here. It should be:
>
> + if (index + nr_to_read - 1 > end_index)
> + nr_to_read = end_index - index + 1;
>
But then if someone passes index=0 and nr_to_read=0, this underflows and the
entire file gets read.
The page cache isn't actually supposed to contain a page at index ULONG_MAX,
since MAX_LFS_FILESIZE is at most ((loff_t)ULONG_MAX << PAGE_SHIFT), right? So
I don't think we need to worry about reading the page with index ULONG_MAX.
I.e. I think it's fine to limit nr_to_read to 'ULONG_MAX - index', if that makes
it easier to avoid an overflow or underflow in the next check.
- Eric
next prev parent reply other threads:[~2020-03-20 18:00 UTC|newest]
Thread overview: 230+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-20 14:22 [Cluster-devel] [PATCH v9 00/25] Change readahead API Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 01/25] mm: Move readahead prototypes from mm.h Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 02/25] mm: Return void from various readahead functions Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 03/25] mm: Ignore return value of ->readpages Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 04/25] mm: Move readahead nr_pages check into read_pages Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 05/25] mm: Add new readahead_control API Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 06/25] mm: Use readahead_control to pass arguments Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 07/25] mm: Rename various 'offset' parameters to 'index' Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 08/25] mm: rename readahead loop variable to 'i' Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 09/25] mm: Remove 'page_offset' from readahead loop Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 10/25] mm: Put readahead pages in cache earlier Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 11/25] mm: Add readahead address space operation Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 12/25] mm: Move end_index check out of readahead loop Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 16:58 ` [Cluster-devel] " Eric Biggers
2020-03-20 16:58 ` [Ocfs2-devel] " Eric Biggers
2020-03-20 16:58 ` [f2fs-dev] " Eric Biggers
2020-03-20 16:58 ` Eric Biggers
2020-03-20 16:58 ` Eric Biggers
2020-03-20 17:30 ` [Cluster-devel] " Matthew Wilcox
2020-03-20 17:30 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 17:30 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 17:30 ` Matthew Wilcox
2020-03-20 17:30 ` Matthew Wilcox
2020-03-20 18:00 ` Eric Biggers [this message]
2020-03-20 18:00 ` [Ocfs2-devel] " Eric Biggers
2020-03-20 18:00 ` [f2fs-dev] " Eric Biggers
2020-03-20 18:00 ` Eric Biggers
2020-03-20 18:00 ` Eric Biggers
2020-03-20 18:11 ` [Cluster-devel] " Matthew Wilcox
2020-03-20 18:11 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 18:11 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 18:11 ` Matthew Wilcox
2020-03-20 18:11 ` Matthew Wilcox
2020-03-20 18:24 ` [Cluster-devel] " Eric Biggers
2020-03-20 18:24 ` [Ocfs2-devel] " Eric Biggers
2020-03-20 18:24 ` [f2fs-dev] " Eric Biggers
2020-03-20 18:24 ` Eric Biggers
2020-03-20 18:24 ` Eric Biggers
2020-03-22 16:28 ` [Cluster-devel] " Matthew Wilcox
2020-03-22 16:28 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-22 16:28 ` [f2fs-dev] " Matthew Wilcox
2020-03-22 16:28 ` Matthew Wilcox
2020-03-22 16:28 ` Matthew Wilcox
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 13/25] mm: Add page_cache_readahead_unbounded Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 17:27 ` [Cluster-devel] " Eric Biggers
2020-03-20 17:27 ` [Ocfs2-devel] " Eric Biggers
2020-03-20 17:27 ` [f2fs-dev] " Eric Biggers
2020-03-20 17:27 ` Eric Biggers
2020-03-20 17:27 ` Eric Biggers
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 14/25] mm: Document why we don't set PageReadahead Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 15/25] mm: Use memalloc_nofs_save in readahead path Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 16/25] fs: Convert mpage_readpages to mpage_readahead Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 23:24 ` [Cluster-devel] " Namjae Jeon
2020-03-20 23:24 ` [Ocfs2-devel] " Namjae Jeon
2020-03-20 23:24 ` [f2fs-dev] " Namjae Jeon
2020-03-20 23:24 ` Namjae Jeon
2020-03-20 23:24 ` Namjae Jeon
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 17/25] btrfs: Convert from readpages to readahead Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 18/25] erofs: Convert uncompressed files " Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-21 12:38 ` [Cluster-devel] [f2fs-dev] " Chao Yu
2020-03-21 12:38 ` [Ocfs2-devel] " Chao Yu
2020-03-21 12:38 ` Chao Yu
2020-03-21 12:38 ` Chao Yu
2020-03-21 12:38 ` Chao Yu
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 19/25] erofs: Convert compressed " Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-21 12:41 ` [Cluster-devel] [f2fs-dev] " Chao Yu
2020-03-21 12:41 ` [Ocfs2-devel] " Chao Yu
2020-03-21 12:41 ` Chao Yu
2020-03-21 12:41 ` Chao Yu
2020-03-21 12:41 ` Chao Yu
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 20/25] ext4: Convert " Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 17:37 ` [Cluster-devel] " Eric Biggers
2020-03-20 17:37 ` [Ocfs2-devel] " Eric Biggers
2020-03-20 17:37 ` [f2fs-dev] " Eric Biggers
2020-03-20 17:37 ` Eric Biggers
2020-03-20 17:37 ` Eric Biggers
2020-03-20 17:48 ` [Cluster-devel] " Matthew Wilcox
2020-03-20 17:48 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 17:48 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 17:48 ` Matthew Wilcox
2020-03-20 17:48 ` Matthew Wilcox
2020-03-20 18:40 ` [Cluster-devel] " Eric Biggers
2020-03-20 18:40 ` [Ocfs2-devel] " Eric Biggers
2020-03-20 18:40 ` [f2fs-dev] " Eric Biggers
2020-03-20 18:40 ` Eric Biggers
2020-03-20 18:40 ` Eric Biggers
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 21/25] ext4: Pass the inode to ext4_mpage_readpages Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 18:44 ` [Cluster-devel] " Eric Biggers
2020-03-20 18:44 ` [Ocfs2-devel] " Eric Biggers
2020-03-20 18:44 ` [f2fs-dev] " Eric Biggers
2020-03-20 18:44 ` Eric Biggers
2020-03-20 18:44 ` Eric Biggers
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 22/25] f2fs: Convert from readpages to readahead Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 18:51 ` [Cluster-devel] " Eric Biggers
2020-03-20 18:51 ` [Ocfs2-devel] " Eric Biggers
2020-03-20 18:51 ` [f2fs-dev] " Eric Biggers
2020-03-20 18:51 ` Eric Biggers
2020-03-20 18:51 ` Eric Biggers
2020-03-21 12:34 ` [Cluster-devel] [f2fs-dev] " Chao Yu
2020-03-21 12:34 ` [Ocfs2-devel] " Chao Yu
2020-03-21 12:34 ` Chao Yu
2020-03-21 12:34 ` Chao Yu
2020-03-21 12:34 ` Chao Yu
2020-03-23 3:55 ` [Cluster-devel] " Jaegeuk Kim
2020-03-23 3:55 ` [Ocfs2-devel] " Jaegeuk Kim
2020-03-23 3:55 ` Jaegeuk Kim
2020-03-23 3:55 ` Jaegeuk Kim
2020-03-23 3:55 ` Jaegeuk Kim
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 23/25] f2fs: Pass the inode to f2fs_mpage_readpages Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 18:52 ` [Cluster-devel] " Eric Biggers
2020-03-20 18:52 ` [Ocfs2-devel] " Eric Biggers
2020-03-20 18:52 ` [f2fs-dev] " Eric Biggers
2020-03-20 18:52 ` Eric Biggers
2020-03-20 18:52 ` Eric Biggers
2020-03-21 12:35 ` [Cluster-devel] [f2fs-dev] " Chao Yu
2020-03-21 12:35 ` [Ocfs2-devel] " Chao Yu
2020-03-21 12:35 ` Chao Yu
2020-03-21 12:35 ` Chao Yu
2020-03-21 12:35 ` Chao Yu
2020-03-23 3:53 ` [Cluster-devel] " Jaegeuk Kim
2020-03-23 3:53 ` [Ocfs2-devel] " Jaegeuk Kim
2020-03-23 3:53 ` Jaegeuk Kim
2020-03-23 3:53 ` Jaegeuk Kim
2020-03-23 3:53 ` Jaegeuk Kim
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 24/25] fuse: Convert from readpages to readahead Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` [Cluster-devel] [PATCH v9 25/25] iomap: " Matthew Wilcox
2020-03-20 14:22 ` [Ocfs2-devel] " Matthew Wilcox
2020-03-20 14:22 ` [f2fs-dev] " Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
2020-03-20 14:22 ` Matthew Wilcox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200320180017.GE851@sol.localdomain \
--to=ebiggers@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.