All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: linux-arm-kernel@lists.infradead.org,
	kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Jason Cooper <jason@lakedaemon.net>,
	Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH v6 21/23] KVM: arm64: GICv4.1: Reload VLPI configuration on distributor enable/disable
Date: Fri, 20 Mar 2020 18:24:04 +0000	[thread overview]
Message-ID: <20200320182406.23465-22-maz@kernel.org> (raw)
In-Reply-To: <20200320182406.23465-1-maz@kernel.org>

Each time a Group-enable bit gets flipped, the state of these bits
needs to be forwarded to the hardware. This is a pretty heavy
handed operation, requiring all vcpus to reload their GICv4
configuration. It is thus implemented as a new request type.

These enable bits are programmed into the HW by setting the VGrp{0,1}En
fields of GICR_VPENDBASER when the vPEs are made resident again.

Of course, we only support Group-1 for now...

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-22-maz@kernel.org
---
 arch/arm/include/asm/kvm_host.h   | 1 +
 arch/arm64/include/asm/kvm_host.h | 1 +
 virt/kvm/arm/arm.c                | 8 ++++++++
 virt/kvm/arm/vgic/vgic-mmio-v3.c  | 5 ++++-
 4 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index a827b4d60d38..3da57e863df6 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -39,6 +39,7 @@
 #define KVM_REQ_IRQ_PENDING	KVM_ARCH_REQ(1)
 #define KVM_REQ_VCPU_RESET	KVM_ARCH_REQ(2)
 #define KVM_REQ_RECORD_STEAL	KVM_ARCH_REQ(3)
+#define KVM_REQ_RELOAD_GICv4	KVM_ARCH_REQ(4)
 
 DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use);
 
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 57fd46acd058..32c8a675e5a4 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -44,6 +44,7 @@
 #define KVM_REQ_IRQ_PENDING	KVM_ARCH_REQ(1)
 #define KVM_REQ_VCPU_RESET	KVM_ARCH_REQ(2)
 #define KVM_REQ_RECORD_STEAL	KVM_ARCH_REQ(3)
+#define KVM_REQ_RELOAD_GICv4	KVM_ARCH_REQ(4)
 
 DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use);
 
diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c
index eda7b624eab8..4d864f857ac8 100644
--- a/virt/kvm/arm/arm.c
+++ b/virt/kvm/arm/arm.c
@@ -625,6 +625,14 @@ static void check_vcpu_requests(struct kvm_vcpu *vcpu)
 
 		if (kvm_check_request(KVM_REQ_RECORD_STEAL, vcpu))
 			kvm_update_stolen_time(vcpu);
+
+		if (kvm_check_request(KVM_REQ_RELOAD_GICv4, vcpu)) {
+			/* The distributor enable bits were changed */
+			preempt_disable();
+			vgic_v4_put(vcpu, false);
+			vgic_v4_load(vcpu);
+			preempt_enable();
+		}
 	}
 }
 
diff --git a/virt/kvm/arm/vgic/vgic-mmio-v3.c b/virt/kvm/arm/vgic/vgic-mmio-v3.c
index 905032a03886..e72dcc454247 100644
--- a/virt/kvm/arm/vgic/vgic-mmio-v3.c
+++ b/virt/kvm/arm/vgic/vgic-mmio-v3.c
@@ -132,7 +132,10 @@ static void vgic_mmio_write_v3_misc(struct kvm_vcpu *vcpu,
 		if (is_hwsgi != dist->nassgireq)
 			vgic_v4_configure_vsgis(vcpu->kvm);
 
-		if (!was_enabled && dist->enabled)
+		if (kvm_vgic_global_state.has_gicv4_1 &&
+		    was_enabled != dist->enabled)
+			kvm_make_all_cpus_request(vcpu->kvm, KVM_REQ_RELOAD_GICv4);
+		else if (!was_enabled && dist->enabled)
 			vgic_kick_vcpus(vcpu->kvm);
 
 		mutex_unlock(&vcpu->kvm->lock);
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

WARNING: multiple messages have this Message-ID (diff)
From: Marc Zyngier <maz@kernel.org>
To: linux-arm-kernel@lists.infradead.org,
	kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Jason Cooper <jason@lakedaemon.net>,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	Eric Auger <eric.auger@redhat.com>,
	James Morse <james.morse@arm.com>,
	Zenghui Yu <yuzenghui@huawei.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Julien Thierry <julien.thierry.kdev@gmail.com>
Subject: [PATCH v6 21/23] KVM: arm64: GICv4.1: Reload VLPI configuration on distributor enable/disable
Date: Fri, 20 Mar 2020 18:24:04 +0000	[thread overview]
Message-ID: <20200320182406.23465-22-maz@kernel.org> (raw)
In-Reply-To: <20200320182406.23465-1-maz@kernel.org>

Each time a Group-enable bit gets flipped, the state of these bits
needs to be forwarded to the hardware. This is a pretty heavy
handed operation, requiring all vcpus to reload their GICv4
configuration. It is thus implemented as a new request type.

These enable bits are programmed into the HW by setting the VGrp{0,1}En
fields of GICR_VPENDBASER when the vPEs are made resident again.

Of course, we only support Group-1 for now...

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-22-maz@kernel.org
---
 arch/arm/include/asm/kvm_host.h   | 1 +
 arch/arm64/include/asm/kvm_host.h | 1 +
 virt/kvm/arm/arm.c                | 8 ++++++++
 virt/kvm/arm/vgic/vgic-mmio-v3.c  | 5 ++++-
 4 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index a827b4d60d38..3da57e863df6 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -39,6 +39,7 @@
 #define KVM_REQ_IRQ_PENDING	KVM_ARCH_REQ(1)
 #define KVM_REQ_VCPU_RESET	KVM_ARCH_REQ(2)
 #define KVM_REQ_RECORD_STEAL	KVM_ARCH_REQ(3)
+#define KVM_REQ_RELOAD_GICv4	KVM_ARCH_REQ(4)
 
 DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use);
 
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 57fd46acd058..32c8a675e5a4 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -44,6 +44,7 @@
 #define KVM_REQ_IRQ_PENDING	KVM_ARCH_REQ(1)
 #define KVM_REQ_VCPU_RESET	KVM_ARCH_REQ(2)
 #define KVM_REQ_RECORD_STEAL	KVM_ARCH_REQ(3)
+#define KVM_REQ_RELOAD_GICv4	KVM_ARCH_REQ(4)
 
 DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use);
 
diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c
index eda7b624eab8..4d864f857ac8 100644
--- a/virt/kvm/arm/arm.c
+++ b/virt/kvm/arm/arm.c
@@ -625,6 +625,14 @@ static void check_vcpu_requests(struct kvm_vcpu *vcpu)
 
 		if (kvm_check_request(KVM_REQ_RECORD_STEAL, vcpu))
 			kvm_update_stolen_time(vcpu);
+
+		if (kvm_check_request(KVM_REQ_RELOAD_GICv4, vcpu)) {
+			/* The distributor enable bits were changed */
+			preempt_disable();
+			vgic_v4_put(vcpu, false);
+			vgic_v4_load(vcpu);
+			preempt_enable();
+		}
 	}
 }
 
diff --git a/virt/kvm/arm/vgic/vgic-mmio-v3.c b/virt/kvm/arm/vgic/vgic-mmio-v3.c
index 905032a03886..e72dcc454247 100644
--- a/virt/kvm/arm/vgic/vgic-mmio-v3.c
+++ b/virt/kvm/arm/vgic/vgic-mmio-v3.c
@@ -132,7 +132,10 @@ static void vgic_mmio_write_v3_misc(struct kvm_vcpu *vcpu,
 		if (is_hwsgi != dist->nassgireq)
 			vgic_v4_configure_vsgis(vcpu->kvm);
 
-		if (!was_enabled && dist->enabled)
+		if (kvm_vgic_global_state.has_gicv4_1 &&
+		    was_enabled != dist->enabled)
+			kvm_make_all_cpus_request(vcpu->kvm, KVM_REQ_RELOAD_GICv4);
+		else if (!was_enabled && dist->enabled)
 			vgic_kick_vcpus(vcpu->kvm);
 
 		mutex_unlock(&vcpu->kvm->lock);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Marc Zyngier <maz@kernel.org>
To: linux-arm-kernel@lists.infradead.org,
	kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Jason Cooper <jason@lakedaemon.net>,
	Thomas Gleixner <tglx@linutronix.de>,
	Zenghui Yu <yuzenghui@huawei.com>,
	Eric Auger <eric.auger@redhat.com>,
	James Morse <james.morse@arm.com>,
	Julien Thierry <julien.thierry.kdev@gmail.com>,
	Suzuki K Poulose <suzuki.poulose@arm.com>
Subject: [PATCH v6 21/23] KVM: arm64: GICv4.1: Reload VLPI configuration on distributor enable/disable
Date: Fri, 20 Mar 2020 18:24:04 +0000	[thread overview]
Message-ID: <20200320182406.23465-22-maz@kernel.org> (raw)
In-Reply-To: <20200320182406.23465-1-maz@kernel.org>

Each time a Group-enable bit gets flipped, the state of these bits
needs to be forwarded to the hardware. This is a pretty heavy
handed operation, requiring all vcpus to reload their GICv4
configuration. It is thus implemented as a new request type.

These enable bits are programmed into the HW by setting the VGrp{0,1}En
fields of GICR_VPENDBASER when the vPEs are made resident again.

Of course, we only support Group-1 for now...

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-22-maz@kernel.org
---
 arch/arm/include/asm/kvm_host.h   | 1 +
 arch/arm64/include/asm/kvm_host.h | 1 +
 virt/kvm/arm/arm.c                | 8 ++++++++
 virt/kvm/arm/vgic/vgic-mmio-v3.c  | 5 ++++-
 4 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index a827b4d60d38..3da57e863df6 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -39,6 +39,7 @@
 #define KVM_REQ_IRQ_PENDING	KVM_ARCH_REQ(1)
 #define KVM_REQ_VCPU_RESET	KVM_ARCH_REQ(2)
 #define KVM_REQ_RECORD_STEAL	KVM_ARCH_REQ(3)
+#define KVM_REQ_RELOAD_GICv4	KVM_ARCH_REQ(4)
 
 DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use);
 
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 57fd46acd058..32c8a675e5a4 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -44,6 +44,7 @@
 #define KVM_REQ_IRQ_PENDING	KVM_ARCH_REQ(1)
 #define KVM_REQ_VCPU_RESET	KVM_ARCH_REQ(2)
 #define KVM_REQ_RECORD_STEAL	KVM_ARCH_REQ(3)
+#define KVM_REQ_RELOAD_GICv4	KVM_ARCH_REQ(4)
 
 DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use);
 
diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c
index eda7b624eab8..4d864f857ac8 100644
--- a/virt/kvm/arm/arm.c
+++ b/virt/kvm/arm/arm.c
@@ -625,6 +625,14 @@ static void check_vcpu_requests(struct kvm_vcpu *vcpu)
 
 		if (kvm_check_request(KVM_REQ_RECORD_STEAL, vcpu))
 			kvm_update_stolen_time(vcpu);
+
+		if (kvm_check_request(KVM_REQ_RELOAD_GICv4, vcpu)) {
+			/* The distributor enable bits were changed */
+			preempt_disable();
+			vgic_v4_put(vcpu, false);
+			vgic_v4_load(vcpu);
+			preempt_enable();
+		}
 	}
 }
 
diff --git a/virt/kvm/arm/vgic/vgic-mmio-v3.c b/virt/kvm/arm/vgic/vgic-mmio-v3.c
index 905032a03886..e72dcc454247 100644
--- a/virt/kvm/arm/vgic/vgic-mmio-v3.c
+++ b/virt/kvm/arm/vgic/vgic-mmio-v3.c
@@ -132,7 +132,10 @@ static void vgic_mmio_write_v3_misc(struct kvm_vcpu *vcpu,
 		if (is_hwsgi != dist->nassgireq)
 			vgic_v4_configure_vsgis(vcpu->kvm);
 
-		if (!was_enabled && dist->enabled)
+		if (kvm_vgic_global_state.has_gicv4_1 &&
+		    was_enabled != dist->enabled)
+			kvm_make_all_cpus_request(vcpu->kvm, KVM_REQ_RELOAD_GICv4);
+		else if (!was_enabled && dist->enabled)
 			vgic_kick_vcpus(vcpu->kvm);
 
 		mutex_unlock(&vcpu->kvm->lock);
-- 
2.20.1


  parent reply	other threads:[~2020-03-20 18:51 UTC|newest]

Thread overview: 84+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-20 18:23 [PATCH v6 00/23] irqchip/gic-v4: GICv4.1 architecture support Marc Zyngier
2020-03-20 18:23 ` Marc Zyngier
2020-03-20 18:23 ` Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 01/23] irqchip/gic-v3: Use SGIs without active state if offered Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 02/23] irqchip/gic-v4.1: Skip absent CPUs while iterating over redistributors Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 03/23] irqchip/gic-v4.1: Ensure mutual exclusion between vPE affinity change and RD access Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 04/23] irqchip/gic-v4.1: Wait for completion of redistributor's INVALL operation Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 05/23] irqchip/gic-v4.1: Ensure mutual exclusion betwen invalidations on the same RD Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 06/23] irqchip/gic-v4.1: Advertise support v4.1 to KVM Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 07/23] irqchip/gic-v4.1: Map the ITS SGIR register page Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 08/23] irqchip/gic-v4.1: Plumb skeletal VSGI irqchip Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-24  2:27   ` Zenghui Yu
2020-03-24  2:27     ` Zenghui Yu
2020-03-24  2:27     ` Zenghui Yu
2020-03-24 12:14     ` Marc Zyngier
2020-03-24 12:14       ` Marc Zyngier
2020-03-24 12:14       ` Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 09/23] irqchip/gic-v4.1: Add initial SGI configuration Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 10/23] irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 11/23] irqchip/gic-v4.1: Plumb get/set_irqchip_state " Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 12/23] irqchip/gic-v4.1: Plumb set_vcpu_affinity " Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 13/23] irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 14/23] irqchip/gic-v4.1: Add VSGI allocation/teardown Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-24  2:43   ` Zenghui Yu
2020-03-24  2:43     ` Zenghui Yu
2020-03-24  2:43     ` Zenghui Yu
2020-03-24 12:35     ` Marc Zyngier
2020-03-24 12:35       ` Marc Zyngier
2020-03-24 12:35       ` Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 15/23] irqchip/gic-v4.1: Add VSGI property setup Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23 ` [PATCH v6 16/23] irqchip/gic-v4.1: Eagerly vmap vPEs Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:23   ` Marc Zyngier
2020-03-20 18:24 ` [PATCH v6 17/23] KVM: arm64: GICv4.1: Let doorbells be auto-enabled Marc Zyngier
2020-03-20 18:24   ` Marc Zyngier
2020-03-20 18:24   ` Marc Zyngier
2020-03-20 18:24 ` [PATCH v6 18/23] KVM: arm64: GICv4.1: Add direct injection capability to SGI registers Marc Zyngier
2020-03-20 18:24   ` Marc Zyngier
2020-03-20 18:24   ` Marc Zyngier
2020-03-20 18:24 ` [PATCH v6 19/23] KVM: arm64: GICv4.1: Allow SGIs to switch between HW and SW interrupts Marc Zyngier
2020-03-20 18:24   ` Marc Zyngier
2020-03-20 18:24   ` Marc Zyngier
2020-03-20 18:24 ` [PATCH v6 20/23] KVM: arm64: GICv4.1: Plumb SGI implementation selection in the distributor Marc Zyngier
2020-03-20 18:24   ` Marc Zyngier
2020-03-20 18:24   ` Marc Zyngier
2020-03-20 18:24 ` Marc Zyngier [this message]
2020-03-20 18:24   ` [PATCH v6 21/23] KVM: arm64: GICv4.1: Reload VLPI configuration on distributor enable/disable Marc Zyngier
2020-03-20 18:24   ` Marc Zyngier
2020-03-20 18:24 ` [PATCH v6 22/23] KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs Marc Zyngier
2020-03-20 18:24   ` Marc Zyngier
2020-03-20 18:24   ` Marc Zyngier
2020-03-20 18:24 ` [PATCH v6 23/23] KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs Marc Zyngier
2020-03-20 18:24   ` Marc Zyngier
2020-03-20 18:24   ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200320182406.23465-22-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.