All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>,
	devicetree@vger.kernel.org, netdev <netdev@vger.kernel.org>,
	Sekhar Nori <nsekhar@ti.com>,
	linux-kernel@vger.kernel.org,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Murali Karicheri <m-karicheri2@ti.com>,
	Jakub Kicinski <kuba@kernel.org>,
	"David S . Miller" <davem@davemloft.net>,
	linux-arm-kernel@lists.infradead.org,
	Roger Quadros <rogerq@ti.com>
Subject: Re: [PATCH net-next v5 05/11] dt-binding: ti: am65x: document mcu cpsw nuss
Date: Fri, 20 Mar 2020 16:55:56 -0600	[thread overview]
Message-ID: <20200320225556.GA12084@bogus> (raw)
In-Reply-To: <20200319162806.25705-6-grygorii.strashko@ti.com>

On Thu, Mar 19, 2020 at 06:28:00PM +0200, Grygorii Strashko wrote:
> Document device tree bindings for The TI AM654x/J721E SoC Gigabit Ethernet MAC
> (Media Access Controller - CPSW2G NUSS). The CPSW NUSS provides Ethernet packet
> communication for the device.
> 
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> Tested-by: Murali Karicheri <m-karicheri2@ti.com>
> ---
>  .../bindings/net/ti,k3-am654-cpsw-nuss.yaml   | 226 ++++++++++++++++++
>  1 file changed, 226 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
> new file mode 100644
> index 000000000000..c28b5c925377
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
> @@ -0,0 +1,226 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/ti,k3-am654-cpsw-nuss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: The TI AM654x/J721E SoC Gigabit Ethernet MAC (Media Access Controller) Device Tree Bindings
> +
> +maintainers:
> +  - Grygorii Strashko <grygorii.strashko@ti.com>
> +  - Sekhar Nori <nsekhar@ti.com>
> +
> +description:
> +  The TI AM654x/J721E SoC Gigabit Ethernet MAC (CPSW2G NUSS) has two ports
> +  (one external) and provides Ethernet packet communication for the device.
> +  CPSW2G NUSS features - the Reduced Gigabit Media Independent Interface (RGMII),
> +  Reduced Media Independent Interface (RMII), the Management Data
> +  Input/Output (MDIO) interface for physical layer device (PHY) management,
> +  new version of Common Platform Time Sync (CPTS), updated Address Lookup
> +  Engine (ALE).
> +  One external Ethernet port (port 1) with selectable RGMII/RMII interfaces and
> +  an internal Communications Port Programming Interface (CPPI5) (Host port 0).
> +  Host Port 0 CPPI Packet Streaming Interface interface supports 8 TX channels
> +  and one RX channels and operating by TI AM654x/J721E NAVSS Unified DMA
> +  Peripheral Root Complex (UDMA-P) controller.
> +  The CPSW2G NUSS is integrated into device MCU domain named MCU_CPSW0.
> +
> +  Additional features
> +  priority level Quality Of Service (QOS) support (802.1p)
> +  Support for Audio/Video Bridging (P802.1Qav/D6.0)
> +  Support for IEEE 1588 Clock Synchronization (2008 Annex D, Annex E and Annex F)
> +  Flow Control (802.3x) Support
> +  Time Sensitive Network Support
> +  IEEE P902.3br/D2.0 Interspersing Express Traffic
> +  IEEE 802.1Qbv/D2.2 Enhancements for Scheduled Traffic
> +  Configurable number of addresses plus VLANs
> +  Configurable number of classifier/policers
> +  VLAN support, 802.1Q compliant, Auto add port VLAN for untagged frames on
> +  ingress, Auto VLAN removal on egress and auto pad to minimum frame size.
> +  RX/TX csum offload
> +
> +  Specifications can be found at
> +    http://www.ti.com/lit/ug/spruid7e/spruid7e.pdf
> +    http://www.ti.com/lit/ug/spruil1a/spruil1a.pdf
> +
> +properties:
> +  "#address-cells": true
> +  "#size-cells": true
> +
> +  compatible:
> +    oneOf:
> +      - const: ti,am654-cpsw-nuss
> +      - const: ti,j721e-cpsw-nuss
> +
> +  reg:
> +    maxItems: 1
> +    description:
> +       The physical base address and size of full the CPSW2G NUSS IO range
> +
> +  reg-names:
> +    items:
> +      - const: cpsw_nuss
> +
> +  ranges: true
> +
> +  dma-coherent: true
> +
> +  clocks:
> +    description: CPSW2G NUSS functional clock
> +
> +  clock-names:
> +    items:
> +      - const: fck
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  dmas:
> +    minItems: 9

Drop this. maxItems is enough.

> +    maxItems: 9
> +
> +  dma-names:
> +    items:
> +      - const: tx0
> +      - const: tx1
> +      - const: tx2
> +      - const: tx3
> +      - const: tx4
> +      - const: tx5
> +      - const: tx6
> +      - const: tx7
> +      - const: rx
> +
> +  pinctrl-names: true

Don't need this. It is implicitly allowed.

> +
> +  ethernet-ports:
> +    type: object
> +    properties:
> +      '#address-cells':
> +        const: 1
> +      '#size-cells':
> +        const: 0
> +
> +    patternProperties:
> +      "^port@[0-9]+$":

reg must be 1, but unit-address can be any number (though it should be 
hex)?

> +          type: object
> +          description: CPSW2G NUSS external ports
> +
> +          allOf:
> +            - $ref: ethernet-controller.yaml#
> +
> +          properties:
> +            reg:
> +              items:
> +                - const: 1
> +              description: CPSW port number
> +
> +            phys:
> +              maxItems: 1
> +              description:  phandle on phy-gmii-sel PHY
> +
> +            label:
> +              description: label associated with this port
> +
> +            ti,mac-only:
> +              $ref: /schemas/types.yaml#definitions/flag
> +              description:
> +                Specifies the port works in mac-only mode.
> +
> +            ti,syscon-efuse:
> +              $ref: /schemas/types.yaml#definitions/phandle-array
> +              description:
> +                Phandle to the system control device node which provides access
> +                to efuse IO range with MAC addresses
> +
> +          required:
> +            - reg
> +            - phys

ethernet-ports needs an 'additionalProperties: false'

> +
> +  mdio:
> +    type: object
> +    allOf:
> +      - $ref: "ti,davinci-mdio.yaml#"
> +    description:
> +      CPSW MDIO bus.
> +
> +patternProperties:
> +  "^pinctrl-[0-9]+$": true

Can drop this.

> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - ranges
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - dmas
> +  - dma-names
> +  - '#address-cells'
> +  - '#size-cells'

Add: 

additionalProperties: false

> +
> +examples:
> +  - |
> +    #include <dt-bindings/pinctrl/k3.h>
> +    #include <dt-bindings/soc/ti,sci_pm_domain.h>
> +    #include <dt-bindings/net/ti-dp83867.h>
> +
> +    mcu_cpsw: ethernet@46000000 {
> +        compatible = "ti,am654-cpsw-nuss";
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +        reg = <0x0 0x46000000 0x0 0x200000>;
> +        reg-names = "cpsw_nuss";
> +        ranges = <0x0 0x0 0x46000000 0x0 0x200000>;
> +        dma-coherent;
> +        clocks = <&k3_clks 5 10>;
> +        clock-names = "fck";
> +        power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
> +
> +        dmas = <&mcu_udmap 0xf000>,
> +               <&mcu_udmap 0xf001>,
> +               <&mcu_udmap 0xf002>,
> +               <&mcu_udmap 0xf003>,
> +               <&mcu_udmap 0xf004>,
> +               <&mcu_udmap 0xf005>,
> +               <&mcu_udmap 0xf006>,
> +               <&mcu_udmap 0xf007>,
> +               <&mcu_udmap 0x7000>;
> +        dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
> +                    "rx";
> +
> +        ethernet-ports {
> +              #address-cells = <1>;
> +              #size-cells = <0>;
> +
> +              cpsw_port1: port@1 {
> +                    reg = <1>;
> +                    ti,mac-only;
> +                    label = "port1";
> +                    ti,syscon-efuse = <&mcu_conf 0x200>;
> +                    phys = <&phy_gmii_sel 1>;
> +
> +                    phy-mode = "rgmii-rxid";
> +                    phy-handle = <&phy0>;
> +              };
> +        };
> +
> +        davinci_mdio: mdio@f00 {
> +              compatible = "ti,cpsw-mdio","ti,davinci_mdio";
> +              reg = <0x0 0xf00 0x0 0x100>;
> +              #address-cells = <1>;
> +              #size-cells = <0>;
> +              clocks = <&k3_clks 5 10>;
> +              clock-names = "fck";
> +              bus_freq = <1000000>;
> +
> +              phy0: ethernet-phy@0 {
> +                    reg = <0>;
> +                    ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> +                    ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> +              };
> +        };
> +    };
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Tero Kristo <t-kristo@ti.com>,
	"David S . Miller" <davem@davemloft.net>,
	netdev <netdev@vger.kernel.org>, Roger Quadros <rogerq@ti.com>,
	devicetree@vger.kernel.org, Jakub Kicinski <kuba@kernel.org>,
	Murali Karicheri <m-karicheri2@ti.com>,
	Sekhar Nori <nsekhar@ti.com>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH net-next v5 05/11] dt-binding: ti: am65x: document mcu cpsw nuss
Date: Fri, 20 Mar 2020 16:55:56 -0600	[thread overview]
Message-ID: <20200320225556.GA12084@bogus> (raw)
In-Reply-To: <20200319162806.25705-6-grygorii.strashko@ti.com>

On Thu, Mar 19, 2020 at 06:28:00PM +0200, Grygorii Strashko wrote:
> Document device tree bindings for The TI AM654x/J721E SoC Gigabit Ethernet MAC
> (Media Access Controller - CPSW2G NUSS). The CPSW NUSS provides Ethernet packet
> communication for the device.
> 
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> Tested-by: Murali Karicheri <m-karicheri2@ti.com>
> ---
>  .../bindings/net/ti,k3-am654-cpsw-nuss.yaml   | 226 ++++++++++++++++++
>  1 file changed, 226 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
> new file mode 100644
> index 000000000000..c28b5c925377
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
> @@ -0,0 +1,226 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/ti,k3-am654-cpsw-nuss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: The TI AM654x/J721E SoC Gigabit Ethernet MAC (Media Access Controller) Device Tree Bindings
> +
> +maintainers:
> +  - Grygorii Strashko <grygorii.strashko@ti.com>
> +  - Sekhar Nori <nsekhar@ti.com>
> +
> +description:
> +  The TI AM654x/J721E SoC Gigabit Ethernet MAC (CPSW2G NUSS) has two ports
> +  (one external) and provides Ethernet packet communication for the device.
> +  CPSW2G NUSS features - the Reduced Gigabit Media Independent Interface (RGMII),
> +  Reduced Media Independent Interface (RMII), the Management Data
> +  Input/Output (MDIO) interface for physical layer device (PHY) management,
> +  new version of Common Platform Time Sync (CPTS), updated Address Lookup
> +  Engine (ALE).
> +  One external Ethernet port (port 1) with selectable RGMII/RMII interfaces and
> +  an internal Communications Port Programming Interface (CPPI5) (Host port 0).
> +  Host Port 0 CPPI Packet Streaming Interface interface supports 8 TX channels
> +  and one RX channels and operating by TI AM654x/J721E NAVSS Unified DMA
> +  Peripheral Root Complex (UDMA-P) controller.
> +  The CPSW2G NUSS is integrated into device MCU domain named MCU_CPSW0.
> +
> +  Additional features
> +  priority level Quality Of Service (QOS) support (802.1p)
> +  Support for Audio/Video Bridging (P802.1Qav/D6.0)
> +  Support for IEEE 1588 Clock Synchronization (2008 Annex D, Annex E and Annex F)
> +  Flow Control (802.3x) Support
> +  Time Sensitive Network Support
> +  IEEE P902.3br/D2.0 Interspersing Express Traffic
> +  IEEE 802.1Qbv/D2.2 Enhancements for Scheduled Traffic
> +  Configurable number of addresses plus VLANs
> +  Configurable number of classifier/policers
> +  VLAN support, 802.1Q compliant, Auto add port VLAN for untagged frames on
> +  ingress, Auto VLAN removal on egress and auto pad to minimum frame size.
> +  RX/TX csum offload
> +
> +  Specifications can be found at
> +    http://www.ti.com/lit/ug/spruid7e/spruid7e.pdf
> +    http://www.ti.com/lit/ug/spruil1a/spruil1a.pdf
> +
> +properties:
> +  "#address-cells": true
> +  "#size-cells": true
> +
> +  compatible:
> +    oneOf:
> +      - const: ti,am654-cpsw-nuss
> +      - const: ti,j721e-cpsw-nuss
> +
> +  reg:
> +    maxItems: 1
> +    description:
> +       The physical base address and size of full the CPSW2G NUSS IO range
> +
> +  reg-names:
> +    items:
> +      - const: cpsw_nuss
> +
> +  ranges: true
> +
> +  dma-coherent: true
> +
> +  clocks:
> +    description: CPSW2G NUSS functional clock
> +
> +  clock-names:
> +    items:
> +      - const: fck
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  dmas:
> +    minItems: 9

Drop this. maxItems is enough.

> +    maxItems: 9
> +
> +  dma-names:
> +    items:
> +      - const: tx0
> +      - const: tx1
> +      - const: tx2
> +      - const: tx3
> +      - const: tx4
> +      - const: tx5
> +      - const: tx6
> +      - const: tx7
> +      - const: rx
> +
> +  pinctrl-names: true

Don't need this. It is implicitly allowed.

> +
> +  ethernet-ports:
> +    type: object
> +    properties:
> +      '#address-cells':
> +        const: 1
> +      '#size-cells':
> +        const: 0
> +
> +    patternProperties:
> +      "^port@[0-9]+$":

reg must be 1, but unit-address can be any number (though it should be 
hex)?

> +          type: object
> +          description: CPSW2G NUSS external ports
> +
> +          allOf:
> +            - $ref: ethernet-controller.yaml#
> +
> +          properties:
> +            reg:
> +              items:
> +                - const: 1
> +              description: CPSW port number
> +
> +            phys:
> +              maxItems: 1
> +              description:  phandle on phy-gmii-sel PHY
> +
> +            label:
> +              description: label associated with this port
> +
> +            ti,mac-only:
> +              $ref: /schemas/types.yaml#definitions/flag
> +              description:
> +                Specifies the port works in mac-only mode.
> +
> +            ti,syscon-efuse:
> +              $ref: /schemas/types.yaml#definitions/phandle-array
> +              description:
> +                Phandle to the system control device node which provides access
> +                to efuse IO range with MAC addresses
> +
> +          required:
> +            - reg
> +            - phys

ethernet-ports needs an 'additionalProperties: false'

> +
> +  mdio:
> +    type: object
> +    allOf:
> +      - $ref: "ti,davinci-mdio.yaml#"
> +    description:
> +      CPSW MDIO bus.
> +
> +patternProperties:
> +  "^pinctrl-[0-9]+$": true

Can drop this.

> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - ranges
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - dmas
> +  - dma-names
> +  - '#address-cells'
> +  - '#size-cells'

Add: 

additionalProperties: false

> +
> +examples:
> +  - |
> +    #include <dt-bindings/pinctrl/k3.h>
> +    #include <dt-bindings/soc/ti,sci_pm_domain.h>
> +    #include <dt-bindings/net/ti-dp83867.h>
> +
> +    mcu_cpsw: ethernet@46000000 {
> +        compatible = "ti,am654-cpsw-nuss";
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +        reg = <0x0 0x46000000 0x0 0x200000>;
> +        reg-names = "cpsw_nuss";
> +        ranges = <0x0 0x0 0x46000000 0x0 0x200000>;
> +        dma-coherent;
> +        clocks = <&k3_clks 5 10>;
> +        clock-names = "fck";
> +        power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
> +
> +        dmas = <&mcu_udmap 0xf000>,
> +               <&mcu_udmap 0xf001>,
> +               <&mcu_udmap 0xf002>,
> +               <&mcu_udmap 0xf003>,
> +               <&mcu_udmap 0xf004>,
> +               <&mcu_udmap 0xf005>,
> +               <&mcu_udmap 0xf006>,
> +               <&mcu_udmap 0xf007>,
> +               <&mcu_udmap 0x7000>;
> +        dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
> +                    "rx";
> +
> +        ethernet-ports {
> +              #address-cells = <1>;
> +              #size-cells = <0>;
> +
> +              cpsw_port1: port@1 {
> +                    reg = <1>;
> +                    ti,mac-only;
> +                    label = "port1";
> +                    ti,syscon-efuse = <&mcu_conf 0x200>;
> +                    phys = <&phy_gmii_sel 1>;
> +
> +                    phy-mode = "rgmii-rxid";
> +                    phy-handle = <&phy0>;
> +              };
> +        };
> +
> +        davinci_mdio: mdio@f00 {
> +              compatible = "ti,cpsw-mdio","ti,davinci_mdio";
> +              reg = <0x0 0xf00 0x0 0x100>;
> +              #address-cells = <1>;
> +              #size-cells = <0>;
> +              clocks = <&k3_clks 5 10>;
> +              clock-names = "fck";
> +              bus_freq = <1000000>;
> +
> +              phy0: ethernet-phy@0 {
> +                    reg = <0>;
> +                    ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> +                    ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> +              };
> +        };
> +    };
> -- 
> 2.17.1
> 

  reply	other threads:[~2020-03-20 22:56 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-19 16:27 [PATCH net-next v5 00/11] net: ethernet: ti: add networking support for k3 am65x/j721e soc Grygorii Strashko
2020-03-19 16:27 ` Grygorii Strashko
2020-03-19 16:27 ` [PATCH net-next v5 01/11] phy: ti: gmii-sel: simplify config dependencies between net drivers and gmii phy Grygorii Strashko
2020-03-19 16:27   ` Grygorii Strashko
2020-03-19 16:27 ` [PATCH net-next v5 02/11] net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled Grygorii Strashko
2020-03-19 16:27   ` Grygorii Strashko
2020-03-19 16:27 ` [PATCH net-next v5 03/11] net: ethernet: ti: ale: add support for mac-only mode Grygorii Strashko
2020-03-19 16:27   ` Grygorii Strashko
2020-03-19 16:27 ` [PATCH net-next v5 04/11] net: ethernet: ti: ale: am65: add support for default thread cfg Grygorii Strashko
2020-03-19 16:27   ` Grygorii Strashko
2020-03-19 16:28 ` [PATCH net-next v5 05/11] dt-binding: ti: am65x: document mcu cpsw nuss Grygorii Strashko
2020-03-19 16:28   ` Grygorii Strashko
2020-03-20 22:55   ` Rob Herring [this message]
2020-03-20 22:55     ` Rob Herring
2020-03-20 22:56   ` Rob Herring
2020-03-20 22:56     ` Rob Herring
2020-03-19 16:28 ` [PATCH net-next v5 06/11] net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver Grygorii Strashko
2020-03-19 16:28   ` Grygorii Strashko
2020-03-19 16:28 ` [PATCH net-next v5 07/11] arm64: dts: ti: k3-am65-mcu: add cpsw nuss node Grygorii Strashko
2020-03-19 16:28   ` Grygorii Strashko
2020-03-19 16:28 ` [PATCH net-next v5 08/11] arm64: dts: k3-am654-base-board: add mcu cpsw nuss pinmux and phy defs Grygorii Strashko
2020-03-19 16:28   ` Grygorii Strashko
2020-03-19 16:28 ` [PATCH net-next v5 09/11] arm64: dts: ti: k3-j721e-mcu: add mcu cpsw nuss node Grygorii Strashko
2020-03-19 16:28   ` Grygorii Strashko
2020-03-19 16:28 ` [PATCH net-next v5 10/11] arm64: dts: ti: k3-j721e-common-proc-board: add mcu cpsw nuss pinmux and phy defs Grygorii Strashko
2020-03-19 16:28   ` Grygorii Strashko
2020-03-19 16:28 ` [PATCH net-next v5 11/11] arm64: defconfig: ti: k3: enable dma and networking Grygorii Strashko
2020-03-19 16:28   ` Grygorii Strashko
2020-03-20 11:37 ` [PATCH net-next v5 00/11] net: ethernet: ti: add networking support for k3 am65x/j721e soc Peter Ujfalusi
2020-03-20 11:37   ` Peter Ujfalusi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200320225556.GA12084@bogus \
    --to=robh@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=grygorii.strashko@ti.com \
    --cc=kishon@ti.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m-karicheri2@ti.com \
    --cc=netdev@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=peter.ujfalusi@ti.com \
    --cc=rogerq@ti.com \
    --cc=t-kristo@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.