* [PATCH v8 0/4] qcow2: Implement zstd cluster compression method
@ 2020-03-21 14:34 Denis Plotnikov
2020-03-21 14:34 ` [PATCH v8 1/4] qcow2: introduce compression type feature Denis Plotnikov
` (3 more replies)
0 siblings, 4 replies; 14+ messages in thread
From: Denis Plotnikov @ 2020-03-21 14:34 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, vsementsov, berto, qemu-block, armbru, mreitz, den
v8:
* 03: switch zstd API from simple to stream [Eric]
No need to state a special cluster layout for zstd
compressed clusters.
v7:
* use qapi_enum_parse instead of the open-coding [Eric]
* fix wording, typos and spelling [Eric]
v6:
* "block/qcow2-threads: fix qcow2_decompress" is removed from the series
since it has been accepted by Max already
* add compile time checking for Qcow2Header to be a multiple of 8 [Max, Alberto]
* report error on qcow2 amending when the compression type is actually chnged [Max]
* remove the extra space and the extra new line [Max]
* re-arrange acks and signed-off-s [Vladimir]
v5:
* replace -ENOTSUP with abort in qcow2_co_decompress [Vladimir]
* set cluster size for all test cases in the beginning of the 287 test
v4:
* the series is rebased on top of 01 "block/qcow2-threads: fix qcow2_decompress"
* 01 is just a no-change resend to avoid extra dependencies. Still, it may be merged in separate
v3:
* remove redundant max compression type value check [Vladimir, Eric]
(the switch below checks everything)
* prevent compression type changing on "qemu-img amend" [Vladimir]
* remove zstd config setting, since it has been added already by
"migration" patches [Vladimir]
* change the compression type error message [Vladimir]
* fix alignment and 80-chars exceeding [Vladimir]
v2:
* rework compression type setting [Vladimir]
* squash iotest changes to the compression type introduction patch [Vladimir, Eric]
* fix zstd availability checking in zstd iotest [Vladimir]
* remove unnecessry casting [Eric]
* remove rudundant checks [Eric]
* fix compressed cluster layout in qcow2 spec [Vladimir]
* fix wording [Eric, Vladimir]
* fix compression type filtering in iotests [Eric]
v1:
the initial series
Denis Plotnikov (4):
qcow2: introduce compression type feature
qcow2: rework the cluster compression routine
qcow2: add zstd cluster compression
iotests: 287: add qcow2 compression type test
docs/interop/qcow2.txt | 1 +
configure | 2 +-
qapi/block-core.json | 23 +++-
block/qcow2.h | 20 +++-
include/block/block_int.h | 1 +
block/qcow2-threads.c | 200 +++++++++++++++++++++++++++++--
block/qcow2.c | 120 +++++++++++++++++++
tests/qemu-iotests/031.out | 14 +--
tests/qemu-iotests/036.out | 4 +-
tests/qemu-iotests/049.out | 102 ++++++++--------
tests/qemu-iotests/060.out | 1 +
tests/qemu-iotests/061.out | 34 +++---
tests/qemu-iotests/065 | 28 +++--
tests/qemu-iotests/080 | 2 +-
tests/qemu-iotests/144.out | 4 +-
tests/qemu-iotests/182.out | 2 +-
tests/qemu-iotests/242.out | 5 +
tests/qemu-iotests/255.out | 8 +-
tests/qemu-iotests/287 | 128 ++++++++++++++++++++
tests/qemu-iotests/287.out | 43 +++++++
tests/qemu-iotests/common.filter | 3 +-
tests/qemu-iotests/group | 1 +
22 files changed, 638 insertions(+), 108 deletions(-)
create mode 100755 tests/qemu-iotests/287
create mode 100644 tests/qemu-iotests/287.out
--
2.17.0
^ permalink raw reply [flat|nested] 14+ messages in thread* [PATCH v8 1/4] qcow2: introduce compression type feature 2020-03-21 14:34 [PATCH v8 0/4] qcow2: Implement zstd cluster compression method Denis Plotnikov @ 2020-03-21 14:34 ` Denis Plotnikov 2020-03-23 8:00 ` Vladimir Sementsov-Ogievskiy 2020-03-21 14:34 ` [PATCH v8 2/4] qcow2: rework the cluster compression routine Denis Plotnikov ` (2 subsequent siblings) 3 siblings, 1 reply; 14+ messages in thread From: Denis Plotnikov @ 2020-03-21 14:34 UTC (permalink / raw) To: qemu-devel; +Cc: kwolf, vsementsov, berto, qemu-block, armbru, mreitz, den The patch adds some preparation parts for incompatible compression type feature to qcow2 allowing the use different compression methods for image clusters (de)compressing. It is implied that the compression type is set on the image creation and can be changed only later by image conversion, thus compression type defines the only compression algorithm used for the image, and thus, for all image clusters. The goal of the feature is to add support of other compression methods to qcow2. For example, ZSTD which is more effective on compression than ZLIB. The default compression is ZLIB. Images created with ZLIB compression type are backward compatible with older qemu versions. Adding of the compression type breaks a number of tests because now the compression type is reported on image creation and there are some changes in the qcow2 header in size and offsets. The tests are fixed in the following ways: * filter out compression_type for many tests * fix header size, feature table size and backing file offset affected tests: 031, 036, 061, 080 header_size +=8: 1 byte compression type 7 bytes padding feature_table += 48: incompatible feature compression type backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change) * add "compression type" for test output matching when it isn't filtered affected tests: 049, 060, 061, 065, 144, 182, 242, 255 Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> --- qapi/block-core.json | 22 +++++- block/qcow2.h | 20 +++++- include/block/block_int.h | 1 + block/qcow2.c | 113 +++++++++++++++++++++++++++++++ tests/qemu-iotests/031.out | 14 ++-- tests/qemu-iotests/036.out | 4 +- tests/qemu-iotests/049.out | 102 ++++++++++++++-------------- tests/qemu-iotests/060.out | 1 + tests/qemu-iotests/061.out | 34 ++++++---- tests/qemu-iotests/065 | 28 +++++--- tests/qemu-iotests/080 | 2 +- tests/qemu-iotests/144.out | 4 +- tests/qemu-iotests/182.out | 2 +- tests/qemu-iotests/242.out | 5 ++ tests/qemu-iotests/255.out | 8 +-- tests/qemu-iotests/common.filter | 3 +- 16 files changed, 267 insertions(+), 96 deletions(-) diff --git a/qapi/block-core.json b/qapi/block-core.json index 85e27bb61f..a306484973 100644 --- a/qapi/block-core.json +++ b/qapi/block-core.json @@ -78,6 +78,8 @@ # # @bitmaps: A list of qcow2 bitmap details (since 4.0) # +# @compression-type: the image cluster compression method (since 5.0) +# # Since: 1.7 ## { 'struct': 'ImageInfoSpecificQCow2', @@ -89,7 +91,8 @@ '*corrupt': 'bool', 'refcount-bits': 'int', '*encrypt': 'ImageInfoSpecificQCow2Encryption', - '*bitmaps': ['Qcow2BitmapInfo'] + '*bitmaps': ['Qcow2BitmapInfo'], + 'compression-type': 'Qcow2CompressionType' } } ## @@ -4392,6 +4395,18 @@ 'data': [ 'v2', 'v3' ] } +## +# @Qcow2CompressionType: +# +# Compression type used in qcow2 image file +# +# @zlib: zlib compression, see <http://zlib.net/> +# +# Since: 5.0 +## +{ 'enum': 'Qcow2CompressionType', + 'data': [ 'zlib' ] } + ## # @BlockdevCreateOptionsQcow2: # @@ -4415,6 +4430,8 @@ # allowed values: off, falloc, full, metadata) # @lazy-refcounts: True if refcounts may be updated lazily (default: off) # @refcount-bits: Width of reference counts in bits (default: 16) +# @compression-type: The image cluster compression method +# (default: zlib, since 5.0) # # Since: 2.12 ## @@ -4430,7 +4447,8 @@ '*cluster-size': 'size', '*preallocation': 'PreallocMode', '*lazy-refcounts': 'bool', - '*refcount-bits': 'int' } } + '*refcount-bits': 'int', + '*compression-type':'Qcow2CompressionType' } } ## # @BlockdevCreateOptionsQed: diff --git a/block/qcow2.h b/block/qcow2.h index 0942126232..cb6bf2ab83 100644 --- a/block/qcow2.h +++ b/block/qcow2.h @@ -146,8 +146,16 @@ typedef struct QCowHeader { uint32_t refcount_order; uint32_t header_length; + + /* Additional fields */ + uint8_t compression_type; + + /* header must be a multiple of 8 */ + uint8_t padding[7]; } QEMU_PACKED QCowHeader; +QEMU_BUILD_BUG_ON(sizeof(QCowHeader) % 8 != 0); + typedef struct QEMU_PACKED QCowSnapshotHeader { /* header is 8 byte aligned */ uint64_t l1_table_offset; @@ -216,13 +224,16 @@ enum { QCOW2_INCOMPAT_DIRTY_BITNR = 0, QCOW2_INCOMPAT_CORRUPT_BITNR = 1, QCOW2_INCOMPAT_DATA_FILE_BITNR = 2, + QCOW2_INCOMPAT_COMPRESSION_BITNR = 3, QCOW2_INCOMPAT_DIRTY = 1 << QCOW2_INCOMPAT_DIRTY_BITNR, QCOW2_INCOMPAT_CORRUPT = 1 << QCOW2_INCOMPAT_CORRUPT_BITNR, QCOW2_INCOMPAT_DATA_FILE = 1 << QCOW2_INCOMPAT_DATA_FILE_BITNR, + QCOW2_INCOMPAT_COMPRESSION = 1 << QCOW2_INCOMPAT_COMPRESSION_BITNR, QCOW2_INCOMPAT_MASK = QCOW2_INCOMPAT_DIRTY | QCOW2_INCOMPAT_CORRUPT - | QCOW2_INCOMPAT_DATA_FILE, + | QCOW2_INCOMPAT_DATA_FILE + | QCOW2_INCOMPAT_COMPRESSION, }; /* Compatible feature bits */ @@ -369,6 +380,13 @@ typedef struct BDRVQcow2State { bool metadata_preallocation_checked; bool metadata_preallocation; + /* + * Compression type used for the image. Default: 0 - ZLIB + * The image compression type is set on image creation. + * For now, the only way to change the compression type + * is to convert the image with the desired compression type set. + */ + Qcow2CompressionType compression_type; } BDRVQcow2State; typedef struct Qcow2COWRegion { diff --git a/include/block/block_int.h b/include/block/block_int.h index 6f9fd5e20e..2c6bb9dc99 100644 --- a/include/block/block_int.h +++ b/include/block/block_int.h @@ -57,6 +57,7 @@ #define BLOCK_OPT_REFCOUNT_BITS "refcount_bits" #define BLOCK_OPT_DATA_FILE "data_file" #define BLOCK_OPT_DATA_FILE_RAW "data_file_raw" +#define BLOCK_OPT_COMPRESSION_TYPE "compression_type" #define BLOCK_PROBE_BUF_SIZE 512 diff --git a/block/qcow2.c b/block/qcow2.c index 3c754f616b..899b5541f5 100644 --- a/block/qcow2.c +++ b/block/qcow2.c @@ -1242,6 +1242,39 @@ static int qcow2_update_options(BlockDriverState *bs, QDict *options, return ret; } +static int validate_compression_type(BDRVQcow2State *s, Error **errp) +{ + switch (s->compression_type) { + case QCOW2_COMPRESSION_TYPE_ZLIB: + break; + + default: + error_setg(errp, "qcow2: unknown compression type: %u", + s->compression_type); + return -ENOTSUP; + } + + /* + * if the compression type differs from QCOW2_COMPRESSION_TYPE_ZLIB + * the incompatible feature flag must be set + */ + if (s->compression_type == QCOW2_COMPRESSION_TYPE_ZLIB) { + if (s->incompatible_features & QCOW2_INCOMPAT_COMPRESSION) { + error_setg(errp, "qcow2: Compression type incompatible feature " + "bit must not be set"); + return -EINVAL; + } + } else { + if (!(s->incompatible_features & QCOW2_INCOMPAT_COMPRESSION)) { + error_setg(errp, "qcow2: Compression type incompatible feature " + "bit must be set"); + return -EINVAL; + } + } + + return 0; +} + /* Called with s->lock held. */ static int coroutine_fn qcow2_do_open(BlockDriverState *bs, QDict *options, int flags, Error **errp) @@ -1357,6 +1390,23 @@ static int coroutine_fn qcow2_do_open(BlockDriverState *bs, QDict *options, s->compatible_features = header.compatible_features; s->autoclear_features = header.autoclear_features; + /* + * Handle compression type + * Older qcow2 images don't contain the compression type header. + * Distinguish them by the header length and use + * the only valid (default) compression type in that case + */ + if (header.header_length > offsetof(QCowHeader, compression_type)) { + s->compression_type = header.compression_type; + } else { + s->compression_type = QCOW2_COMPRESSION_TYPE_ZLIB; + } + + ret = validate_compression_type(s, errp); + if (ret) { + goto fail; + } + if (s->incompatible_features & ~QCOW2_INCOMPAT_MASK) { void *feature_table = NULL; qcow2_read_extensions(bs, header.header_length, ext_end, @@ -2720,6 +2770,11 @@ int qcow2_update_header(BlockDriverState *bs) total_size = bs->total_sectors * BDRV_SECTOR_SIZE; refcount_table_clusters = s->refcount_table_size >> (s->cluster_bits - 3); + ret = validate_compression_type(s, NULL); + if (ret) { + goto fail; + } + *header = (QCowHeader) { /* Version 2 fields */ .magic = cpu_to_be32(QCOW_MAGIC), @@ -2742,6 +2797,7 @@ int qcow2_update_header(BlockDriverState *bs) .autoclear_features = cpu_to_be64(s->autoclear_features), .refcount_order = cpu_to_be32(s->refcount_order), .header_length = cpu_to_be32(header_length), + .compression_type = s->compression_type, }; /* For older versions, write a shorter header */ @@ -2834,6 +2890,11 @@ int qcow2_update_header(BlockDriverState *bs) .bit = QCOW2_INCOMPAT_DATA_FILE_BITNR, .name = "external data file", }, + { + .type = QCOW2_FEAT_TYPE_INCOMPATIBLE, + .bit = QCOW2_INCOMPAT_COMPRESSION_BITNR, + .name = "compression type", + }, { .type = QCOW2_FEAT_TYPE_COMPATIBLE, .bit = QCOW2_COMPAT_LAZY_REFCOUNTS_BITNR, @@ -3262,6 +3323,7 @@ qcow2_co_create(BlockdevCreateOptions *create_options, Error **errp) uint64_t* refcount_table; Error *local_err = NULL; int ret; + uint8_t compression_type = QCOW2_COMPRESSION_TYPE_ZLIB; assert(create_options->driver == BLOCKDEV_DRIVER_QCOW2); qcow2_opts = &create_options->u.qcow2; @@ -3379,6 +3441,27 @@ qcow2_co_create(BlockdevCreateOptions *create_options, Error **errp) } } + if (qcow2_opts->has_compression_type && + qcow2_opts->compression_type != QCOW2_COMPRESSION_TYPE_ZLIB) { + + ret = -EINVAL; + + if (version < 3) { + error_setg(errp, "Non-zlib compression type is only supported with " + "compatibility level 1.1 and above (use version=v3 or " + "greater)"); + goto out; + } + + switch (qcow2_opts->compression_type) { + default: + error_setg(errp, "Unknown compression type"); + goto out; + } + + compression_type = qcow2_opts->compression_type; + } + /* Create BlockBackend to write to the image */ blk = blk_new(bdrv_get_aio_context(bs), BLK_PERM_WRITE | BLK_PERM_RESIZE, BLK_PERM_ALL); @@ -3401,6 +3484,8 @@ qcow2_co_create(BlockdevCreateOptions *create_options, Error **errp) .refcount_table_offset = cpu_to_be64(cluster_size), .refcount_table_clusters = cpu_to_be32(1), .refcount_order = cpu_to_be32(refcount_order), + /* don't deal with endianness since compression_type is 1 byte long */ + .compression_type = compression_type, .header_length = cpu_to_be32(sizeof(*header)), }; @@ -3419,6 +3504,10 @@ qcow2_co_create(BlockdevCreateOptions *create_options, Error **errp) header->autoclear_features |= cpu_to_be64(QCOW2_AUTOCLEAR_DATA_FILE_RAW); } + if (compression_type != QCOW2_COMPRESSION_TYPE_ZLIB) { + header->incompatible_features |= + cpu_to_be64(QCOW2_INCOMPAT_COMPRESSION); + } ret = blk_pwrite(blk, 0, header, cluster_size, 0); g_free(header); @@ -3602,6 +3691,7 @@ static int coroutine_fn qcow2_co_create_opts(const char *filename, QemuOpts *opt { BLOCK_OPT_ENCRYPT, BLOCK_OPT_ENCRYPT_FORMAT }, { BLOCK_OPT_COMPAT_LEVEL, "version" }, { BLOCK_OPT_DATA_FILE_RAW, "data-file-raw" }, + { BLOCK_OPT_COMPRESSION_TYPE, "compression-type" }, { NULL, NULL }, }; @@ -4859,6 +4949,7 @@ static ImageInfoSpecific *qcow2_get_specific_info(BlockDriverState *bs, .data_file = g_strdup(s->image_data_file), .has_data_file_raw = has_data_file(bs), .data_file_raw = data_file_is_raw(bs), + .compression_type = s->compression_type, }; } else { /* if this assertion fails, this probably means a new version was @@ -5248,6 +5339,22 @@ static int qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts, "images"); return -EINVAL; } + } else if (!strcmp(desc->name, BLOCK_OPT_COMPRESSION_TYPE)) { + int compression_type = + qapi_enum_parse(&Qcow2CompressionType_lookup, + qemu_opt_get(opts, BLOCK_OPT_COMPRESSION_TYPE), + -1, errp); + + if (compression_type == -EINVAL) { + error_setg(errp, "Unknown compression type"); + return -ENOTSUP; + } + + if (compression_type != s->compression_type) { + error_setg(errp, "Changing the compression type " + "is not supported"); + return -ENOTSUP; + } } else { /* if this point is reached, this probably means a new option was * added without having it covered here */ @@ -5516,6 +5623,12 @@ static QemuOptsList qcow2_create_opts = { .help = "Width of a reference count entry in bits", .def_value_str = "16" }, + { + .name = BLOCK_OPT_COMPRESSION_TYPE, + .type = QEMU_OPT_STRING, + .help = "Compression method used for image cluster compression", + .def_value_str = "zlib" + }, { /* end of list */ } } }; diff --git a/tests/qemu-iotests/031.out b/tests/qemu-iotests/031.out index d535e407bc..ed51afe9ce 100644 --- a/tests/qemu-iotests/031.out +++ b/tests/qemu-iotests/031.out @@ -113,11 +113,11 @@ incompatible_features [] compatible_features [] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> Header extension: @@ -146,11 +146,11 @@ incompatible_features [] compatible_features [] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> Header extension: @@ -164,7 +164,7 @@ No errors were found on the image. magic 0x514649fb version 3 -backing_file_offset 0x178 +backing_file_offset 0x1b0 backing_file_size 0x17 cluster_bits 16 size 67108864 @@ -179,7 +179,7 @@ incompatible_features [] compatible_features [] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0xe2792aca @@ -188,7 +188,7 @@ data 'host_device' Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> Header extension: diff --git a/tests/qemu-iotests/036.out b/tests/qemu-iotests/036.out index 0b52b934e1..fb509f6357 100644 --- a/tests/qemu-iotests/036.out +++ b/tests/qemu-iotests/036.out @@ -26,7 +26,7 @@ compatible_features [] autoclear_features [63] Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> @@ -38,7 +38,7 @@ compatible_features [] autoclear_features [] Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> *** done diff --git a/tests/qemu-iotests/049.out b/tests/qemu-iotests/049.out index affa55b341..a5cfba1756 100644 --- a/tests/qemu-iotests/049.out +++ b/tests/qemu-iotests/049.out @@ -4,90 +4,90 @@ QA output created by 049 == 1. Traditional size parameter == qemu-img create -f qcow2 TEST_DIR/t.qcow2 1024 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1024b -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1k -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1K -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1048576 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1048576 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1G -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1073741824 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1073741824 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1T -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1099511627776 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1099511627776 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1024.0 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1024.0b -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1.5k -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1.5K -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1.5M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1572864 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1572864 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1.5G -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1610612736 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1610612736 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 TEST_DIR/t.qcow2 1.5T -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1649267441664 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1649267441664 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib == 2. Specifying size via -o == qemu-img create -f qcow2 -o size=1024 TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1024b TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1k TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1K TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1M TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1048576 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1048576 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1G TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1073741824 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1073741824 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1T TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1099511627776 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1099511627776 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1024.0 TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1024.0b TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1.5k TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1.5K TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1.5M TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1572864 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1572864 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1.5G TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1610612736 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1610612736 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o size=1.5T TEST_DIR/t.qcow2 -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1649267441664 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1649267441664 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib == 3. Invalid sizes == @@ -129,84 +129,84 @@ qemu-img: TEST_DIR/t.qcow2: The image size must be specified only once == Check correct interpretation of suffixes for cluster size == qemu-img create -f qcow2 -o cluster_size=1024 TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o cluster_size=1024b TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o cluster_size=1k TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o cluster_size=1K TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o cluster_size=1M TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1048576 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1048576 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o cluster_size=1024.0 TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o cluster_size=1024.0b TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o cluster_size=0.5k TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=512 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=512 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o cluster_size=0.5K TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=512 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=512 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o cluster_size=0.5M TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=524288 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=524288 lazy_refcounts=off refcount_bits=16 compression_type=zlib == Check compat level option == qemu-img create -f qcow2 -o compat=0.10 TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.10 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.10 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o compat=1.1 TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=1.1 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=1.1 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o compat=0.42 TEST_DIR/t.qcow2 64M qemu-img: TEST_DIR/t.qcow2: Invalid parameter '0.42' -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.42 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.42 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o compat=foobar TEST_DIR/t.qcow2 64M qemu-img: TEST_DIR/t.qcow2: Invalid parameter 'foobar' -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=foobar cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=foobar cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib == Check preallocation option == qemu-img create -f qcow2 -o preallocation=off TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=65536 preallocation=off lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=65536 preallocation=off lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o preallocation=metadata TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=65536 preallocation=metadata lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=65536 preallocation=metadata lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o preallocation=1234 TEST_DIR/t.qcow2 64M qemu-img: TEST_DIR/t.qcow2: Invalid parameter '1234' -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=65536 preallocation=1234 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=65536 preallocation=1234 lazy_refcounts=off refcount_bits=16 compression_type=zlib == Check encryption option == qemu-img create -f qcow2 -o encryption=off TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 --object secret,id=sec0,data=123456 -o encryption=on,encrypt.key-secret=sec0 TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 encryption=on encrypt.key-secret=sec0 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 encryption=on encrypt.key-secret=sec0 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib == Check lazy_refcounts option (only with v3) == qemu-img create -f qcow2 -o compat=1.1,lazy_refcounts=off TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=1.1 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=1.1 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o compat=1.1,lazy_refcounts=on TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=1.1 cluster_size=65536 lazy_refcounts=on refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=1.1 cluster_size=65536 lazy_refcounts=on refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o compat=0.10,lazy_refcounts=off TEST_DIR/t.qcow2 64M -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.10 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.10 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib qemu-img create -f qcow2 -o compat=0.10,lazy_refcounts=on TEST_DIR/t.qcow2 64M qemu-img: TEST_DIR/t.qcow2: Lazy refcounts only supported with compatibility level 1.1 and above (use version=v3 or greater) -Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.10 cluster_size=65536 lazy_refcounts=on refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.10 cluster_size=65536 lazy_refcounts=on refcount_bits=16 compression_type=zlib *** done diff --git a/tests/qemu-iotests/060.out b/tests/qemu-iotests/060.out index d27692a33c..3e47f537e8 100644 --- a/tests/qemu-iotests/060.out +++ b/tests/qemu-iotests/060.out @@ -17,6 +17,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 corrupt: true diff --git a/tests/qemu-iotests/061.out b/tests/qemu-iotests/061.out index 8b3091a412..c913f02ad6 100644 --- a/tests/qemu-iotests/061.out +++ b/tests/qemu-iotests/061.out @@ -22,11 +22,11 @@ incompatible_features [] compatible_features [0] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> magic 0x514649fb @@ -80,11 +80,11 @@ incompatible_features [] compatible_features [0] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> magic 0x514649fb @@ -136,11 +136,11 @@ incompatible_features [0] compatible_features [0] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> ERROR cluster 5 refcount=0 reference=1 @@ -191,11 +191,11 @@ incompatible_features [] compatible_features [42] autoclear_features [42] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> magic 0x514649fb @@ -260,11 +260,11 @@ incompatible_features [] compatible_features [0] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> read 65536/65536 bytes at offset 44040192 @@ -294,11 +294,11 @@ incompatible_features [0] compatible_features [0] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> ERROR cluster 5 refcount=0 reference=1 @@ -323,11 +323,11 @@ incompatible_features [] compatible_features [] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> read 131072/131072 bytes at offset 0 @@ -491,6 +491,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 data file: TEST_DIR/t.IMGFMT.data @@ -511,6 +512,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 data file: foo @@ -524,6 +526,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 data file raw: false @@ -538,6 +541,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 data file: TEST_DIR/t.IMGFMT.data @@ -550,6 +554,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 data file: TEST_DIR/t.IMGFMT.data @@ -563,6 +568,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 data file: TEST_DIR/t.IMGFMT.data diff --git a/tests/qemu-iotests/065 b/tests/qemu-iotests/065 index 6426474271..18dc488c7a 100755 --- a/tests/qemu-iotests/065 +++ b/tests/qemu-iotests/065 @@ -88,24 +88,30 @@ class TestQMP(TestImageInfoSpecific): class TestQCow2(TestQemuImgInfo): '''Testing a qcow2 version 2 image''' img_options = 'compat=0.10' - json_compare = { 'compat': '0.10', 'refcount-bits': 16 } - human_compare = [ 'compat: 0.10', 'refcount bits: 16' ] + json_compare = { 'compat': '0.10', 'refcount-bits': 16, + 'compression-type': 'zlib' } + human_compare = [ 'compat: 0.10', 'compression type: zlib', + 'refcount bits: 16' ] class TestQCow3NotLazy(TestQemuImgInfo): '''Testing a qcow2 version 3 image with lazy refcounts disabled''' img_options = 'compat=1.1,lazy_refcounts=off' json_compare = { 'compat': '1.1', 'lazy-refcounts': False, - 'refcount-bits': 16, 'corrupt': False } - human_compare = [ 'compat: 1.1', 'lazy refcounts: false', - 'refcount bits: 16', 'corrupt: false' ] + 'refcount-bits': 16, 'corrupt': False, + 'compression-type': 'zlib' } + human_compare = [ 'compat: 1.1', 'compression type: zlib', + 'lazy refcounts: false', 'refcount bits: 16', + 'corrupt: false' ] class TestQCow3Lazy(TestQemuImgInfo): '''Testing a qcow2 version 3 image with lazy refcounts enabled''' img_options = 'compat=1.1,lazy_refcounts=on' json_compare = { 'compat': '1.1', 'lazy-refcounts': True, - 'refcount-bits': 16, 'corrupt': False } - human_compare = [ 'compat: 1.1', 'lazy refcounts: true', - 'refcount bits: 16', 'corrupt: false' ] + 'refcount-bits': 16, 'corrupt': False, + 'compression-type': 'zlib' } + human_compare = [ 'compat: 1.1', 'compression type: zlib', + 'lazy refcounts: true', 'refcount bits: 16', + 'corrupt: false' ] class TestQCow3NotLazyQMP(TestQMP): '''Testing a qcow2 version 3 image with lazy refcounts disabled, opening @@ -113,7 +119,8 @@ class TestQCow3NotLazyQMP(TestQMP): img_options = 'compat=1.1,lazy_refcounts=off' qemu_options = 'lazy-refcounts=on' compare = { 'compat': '1.1', 'lazy-refcounts': False, - 'refcount-bits': 16, 'corrupt': False } + 'refcount-bits': 16, 'corrupt': False, + 'compression-type': 'zlib' } class TestQCow3LazyQMP(TestQMP): @@ -122,7 +129,8 @@ class TestQCow3LazyQMP(TestQMP): img_options = 'compat=1.1,lazy_refcounts=on' qemu_options = 'lazy-refcounts=off' compare = { 'compat': '1.1', 'lazy-refcounts': True, - 'refcount-bits': 16, 'corrupt': False } + 'refcount-bits': 16, 'corrupt': False, + 'compression-type': 'zlib' } TestImageInfoSpecific = None TestQemuImgInfo = None diff --git a/tests/qemu-iotests/080 b/tests/qemu-iotests/080 index a3d13c414e..7588c63b6c 100755 --- a/tests/qemu-iotests/080 +++ b/tests/qemu-iotests/080 @@ -45,7 +45,7 @@ _supported_os Linux # - This is generally a test for compat=1.1 images _unsupported_imgopts 'refcount_bits=1[^0-9]' data_file 'compat=0.10' -header_size=104 +header_size=112 offset_backing_file_offset=8 offset_backing_file_size=16 diff --git a/tests/qemu-iotests/144.out b/tests/qemu-iotests/144.out index c7aa2e4820..885a8874a5 100644 --- a/tests/qemu-iotests/144.out +++ b/tests/qemu-iotests/144.out @@ -9,7 +9,7 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=536870912 { 'execute': 'qmp_capabilities' } {"return": {}} { 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'virtio0', 'snapshot-file':'TEST_DIR/tmp.IMGFMT', 'format': 'IMGFMT' } } -Formatting 'TEST_DIR/tmp.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/tmp.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib {"return": {}} === Performing block-commit on active layer === @@ -31,6 +31,6 @@ Formatting 'TEST_DIR/tmp.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/ === Performing Live Snapshot 2 === { 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'virtio0', 'snapshot-file':'TEST_DIR/tmp2.IMGFMT', 'format': 'IMGFMT' } } -Formatting 'TEST_DIR/tmp2.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/tmp2.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib {"return": {}} *** done diff --git a/tests/qemu-iotests/182.out b/tests/qemu-iotests/182.out index a8eea166c3..ae43654d32 100644 --- a/tests/qemu-iotests/182.out +++ b/tests/qemu-iotests/182.out @@ -13,7 +13,7 @@ Is another process using the image [TEST_DIR/t.qcow2]? {'execute': 'blockdev-add', 'arguments': { 'node-name': 'node0', 'driver': 'file', 'filename': 'TEST_DIR/t.IMGFMT', 'locking': 'on' } } {"return": {}} {'execute': 'blockdev-snapshot-sync', 'arguments': { 'node-name': 'node0', 'snapshot-file': 'TEST_DIR/t.IMGFMT.overlay', 'snapshot-node-name': 'node1' } } -Formatting 'TEST_DIR/t.qcow2.overlay', fmt=qcow2 size=197120 backing_file=TEST_DIR/t.qcow2 backing_fmt=file cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2.overlay', fmt=qcow2 size=197120 backing_file=TEST_DIR/t.qcow2 backing_fmt=file cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib {"return": {}} {'execute': 'blockdev-add', 'arguments': { 'node-name': 'node1', 'driver': 'file', 'filename': 'TEST_DIR/t.IMGFMT', 'locking': 'on' } } {"return": {}} diff --git a/tests/qemu-iotests/242.out b/tests/qemu-iotests/242.out index 7ac8404d11..091b9126ce 100644 --- a/tests/qemu-iotests/242.out +++ b/tests/qemu-iotests/242.out @@ -12,6 +12,7 @@ virtual size: 1 MiB (1048576 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 corrupt: false @@ -32,6 +33,7 @@ virtual size: 1 MiB (1048576 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false bitmaps: [0]: @@ -64,6 +66,7 @@ virtual size: 1 MiB (1048576 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false bitmaps: [0]: @@ -104,6 +107,7 @@ virtual size: 1 MiB (1048576 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false bitmaps: [0]: @@ -153,6 +157,7 @@ virtual size: 1 MiB (1048576 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false bitmaps: [0]: diff --git a/tests/qemu-iotests/255.out b/tests/qemu-iotests/255.out index 348909fdef..a3c99fd62e 100644 --- a/tests/qemu-iotests/255.out +++ b/tests/qemu-iotests/255.out @@ -3,9 +3,9 @@ Finishing a commit job with background reads === Create backing chain and start VM === -Formatting 'TEST_DIR/PID-t.qcow2.mid', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/PID-t.qcow2.mid', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib -Formatting 'TEST_DIR/PID-t.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/PID-t.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib === Start background read requests === @@ -23,9 +23,9 @@ Closing the VM while a job is being cancelled === Create images and start VM === -Formatting 'TEST_DIR/PID-src.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/PID-src.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib -Formatting 'TEST_DIR/PID-dst.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/PID-dst.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib wrote 1048576/1048576 bytes at offset 0 1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) diff --git a/tests/qemu-iotests/common.filter b/tests/qemu-iotests/common.filter index 3f8ee3e5f7..279e0bbb0d 100644 --- a/tests/qemu-iotests/common.filter +++ b/tests/qemu-iotests/common.filter @@ -152,7 +152,8 @@ _filter_img_create() -e "s# refcount_bits=[0-9]\\+##g" \ -e "s# key-secret=[a-zA-Z0-9]\\+##g" \ -e "s# iter-time=[0-9]\\+##g" \ - -e "s# force_size=\\(on\\|off\\)##g" + -e "s# force_size=\\(on\\|off\\)##g" \ + -e "s# compression_type=[a-zA-Z0-9]\\+##g" } _filter_img_info() -- 2.17.0 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v8 1/4] qcow2: introduce compression type feature 2020-03-21 14:34 ` [PATCH v8 1/4] qcow2: introduce compression type feature Denis Plotnikov @ 2020-03-23 8:00 ` Vladimir Sementsov-Ogievskiy 2020-03-23 12:22 ` Denis Plotnikov 0 siblings, 1 reply; 14+ messages in thread From: Vladimir Sementsov-Ogievskiy @ 2020-03-23 8:00 UTC (permalink / raw) To: Denis Plotnikov, qemu-devel; +Cc: kwolf, berto, qemu-block, armbru, mreitz, den 21.03.2020 17:34, Denis Plotnikov wrote: > The patch adds some preparation parts for incompatible compression type > feature to qcow2 allowing the use different compression methods for > image clusters (de)compressing. > > It is implied that the compression type is set on the image creation and > can be changed only later by image conversion, thus compression type > defines the only compression algorithm used for the image, and thus, > for all image clusters. > > The goal of the feature is to add support of other compression methods > to qcow2. For example, ZSTD which is more effective on compression than ZLIB. > > The default compression is ZLIB. Images created with ZLIB compression type > are backward compatible with older qemu versions. > > Adding of the compression type breaks a number of tests because now the > compression type is reported on image creation and there are some changes > in the qcow2 header in size and offsets. > > The tests are fixed in the following ways: > * filter out compression_type for many tests > * fix header size, feature table size and backing file offset > affected tests: 031, 036, 061, 080 > header_size +=8: 1 byte compression type > 7 bytes padding > feature_table += 48: incompatible feature compression type > backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change) > * add "compression type" for test output matching when it isn't filtered > affected tests: 049, 060, 061, 065, 144, 182, 242, 255 > > Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> > Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> > --- [...] > @@ -4859,6 +4949,7 @@ static ImageInfoSpecific *qcow2_get_specific_info(BlockDriverState *bs, > .data_file = g_strdup(s->image_data_file), > .has_data_file_raw = has_data_file(bs), > .data_file_raw = data_file_is_raw(bs), > + .compression_type = s->compression_type, > }; > } else { > /* if this assertion fails, this probably means a new version was > @@ -5248,6 +5339,22 @@ static int qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts, > "images"); > return -EINVAL; > } > + } else if (!strcmp(desc->name, BLOCK_OPT_COMPRESSION_TYPE)) { > + int compression_type = > + qapi_enum_parse(&Qcow2CompressionType_lookup, > + qemu_opt_get(opts, BLOCK_OPT_COMPRESSION_TYPE), > + -1, errp); > + > + if (compression_type == -EINVAL) { You should compare to -1, as qapi_enum_parse returns given default on error. > + error_setg(errp, "Unknown compression type"); and errp is already set (ofcourse, if qemu_opt_get returned non NULL, but I hope it is guaranteed by if (!strcmp(desc->name, BLOCK_OPT_COMPRESSION_TYPE)) condition > + return -ENOTSUP; > + } > + > + if (compression_type != s->compression_type) { > + error_setg(errp, "Changing the compression type " > + "is not supported"); > + return -ENOTSUP; > + } > } else { > /* if this point is reached, this probably means a new option was > * added without having it covered here */ > @@ -5516,6 +5623,12 @@ static QemuOptsList qcow2_create_opts = { > .help = "Width of a reference count entry in bits", > .def_value_str = "16" > }, > + { > + .name = BLOCK_OPT_COMPRESSION_TYPE, > + .type = QEMU_OPT_STRING, > + .help = "Compression method used for image cluster compression", > + .def_value_str = "zlib" > + }, > { /* end of list */ } > } > }; [...] -- Best regards, Vladimir ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v8 1/4] qcow2: introduce compression type feature 2020-03-23 8:00 ` Vladimir Sementsov-Ogievskiy @ 2020-03-23 12:22 ` Denis Plotnikov 2020-03-23 12:26 ` Vladimir Sementsov-Ogievskiy 0 siblings, 1 reply; 14+ messages in thread From: Denis Plotnikov @ 2020-03-23 12:22 UTC (permalink / raw) To: Vladimir Sementsov-Ogievskiy, qemu-devel Cc: kwolf, berto, qemu-block, armbru, mreitz, den On 23.03.2020 11:00, Vladimir Sementsov-Ogievskiy wrote: > 21.03.2020 17:34, Denis Plotnikov wrote: >> The patch adds some preparation parts for incompatible compression type >> feature to qcow2 allowing the use different compression methods for >> image clusters (de)compressing. >> >> It is implied that the compression type is set on the image creation and >> can be changed only later by image conversion, thus compression type >> defines the only compression algorithm used for the image, and thus, >> for all image clusters. >> >> The goal of the feature is to add support of other compression methods >> to qcow2. For example, ZSTD which is more effective on compression >> than ZLIB. >> >> The default compression is ZLIB. Images created with ZLIB compression >> type >> are backward compatible with older qemu versions. >> >> Adding of the compression type breaks a number of tests because now the >> compression type is reported on image creation and there are some >> changes >> in the qcow2 header in size and offsets. >> >> The tests are fixed in the following ways: >> * filter out compression_type for many tests >> * fix header size, feature table size and backing file offset >> affected tests: 031, 036, 061, 080 >> header_size +=8: 1 byte compression type >> 7 bytes padding >> feature_table += 48: incompatible feature compression type >> backing_file_offset += 56 (8 + 48 -> header_change + >> feature_table_change) >> * add "compression type" for test output matching when it isn't >> filtered >> affected tests: 049, 060, 061, 065, 144, 182, 242, 255 >> >> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> >> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> >> --- > > [...] > >> @@ -4859,6 +4949,7 @@ static ImageInfoSpecific >> *qcow2_get_specific_info(BlockDriverState *bs, >> .data_file = g_strdup(s->image_data_file), >> .has_data_file_raw = has_data_file(bs), >> .data_file_raw = data_file_is_raw(bs), >> + .compression_type = s->compression_type, >> }; >> } else { >> /* if this assertion fails, this probably means a new >> version was >> @@ -5248,6 +5339,22 @@ static int >> qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts, >> "images"); >> return -EINVAL; >> } >> + } else if (!strcmp(desc->name, BLOCK_OPT_COMPRESSION_TYPE)) { >> + int compression_type = >> + qapi_enum_parse(&Qcow2CompressionType_lookup, >> + qemu_opt_get(opts, >> BLOCK_OPT_COMPRESSION_TYPE), >> + -1, errp); >> + >> + if (compression_type == -EINVAL) { > > You should compare to -1, as qapi_enum_parse returns given default on > error. ok > >> + error_setg(errp, "Unknown compression type"); > > and errp is already set (ofcourse, if qemu_opt_get returned non NULL, > but I hope it is guaranteed by if (!strcmp(desc->name, > BLOCK_OPT_COMPRESSION_TYPE)) condition I wouldn't propagate the error from qapi_enum_parse because it looks like "invalid parameter value: foo". I think it's better to print "Unknown compression type: foo" > >> + return -ENOTSUP; >> + } >> + >> + if (compression_type != s->compression_type) { >> + error_setg(errp, "Changing the compression type " >> + "is not supported"); >> + return -ENOTSUP; >> + } >> } else { >> /* if this point is reached, this probably means a new >> option was >> * added without having it covered here */ >> @@ -5516,6 +5623,12 @@ static QemuOptsList qcow2_create_opts = { >> .help = "Width of a reference count entry in bits", >> .def_value_str = "16" >> }, >> + { >> + .name = BLOCK_OPT_COMPRESSION_TYPE, >> + .type = QEMU_OPT_STRING, >> + .help = "Compression method used for image cluster >> compression", >> + .def_value_str = "zlib" >> + }, >> { /* end of list */ } >> } >> }; > > > [...] > > ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v8 1/4] qcow2: introduce compression type feature 2020-03-23 12:22 ` Denis Plotnikov @ 2020-03-23 12:26 ` Vladimir Sementsov-Ogievskiy 2020-03-23 12:30 ` Denis Plotnikov 0 siblings, 1 reply; 14+ messages in thread From: Vladimir Sementsov-Ogievskiy @ 2020-03-23 12:26 UTC (permalink / raw) To: Denis Plotnikov, qemu-devel; +Cc: kwolf, berto, qemu-block, armbru, mreitz, den 23.03.2020 15:22, Denis Plotnikov wrote: > > > On 23.03.2020 11:00, Vladimir Sementsov-Ogievskiy wrote: >> 21.03.2020 17:34, Denis Plotnikov wrote: >>> The patch adds some preparation parts for incompatible compression type >>> feature to qcow2 allowing the use different compression methods for >>> image clusters (de)compressing. >>> >>> It is implied that the compression type is set on the image creation and >>> can be changed only later by image conversion, thus compression type >>> defines the only compression algorithm used for the image, and thus, >>> for all image clusters. >>> >>> The goal of the feature is to add support of other compression methods >>> to qcow2. For example, ZSTD which is more effective on compression than ZLIB. >>> >>> The default compression is ZLIB. Images created with ZLIB compression type >>> are backward compatible with older qemu versions. >>> >>> Adding of the compression type breaks a number of tests because now the >>> compression type is reported on image creation and there are some changes >>> in the qcow2 header in size and offsets. >>> >>> The tests are fixed in the following ways: >>> * filter out compression_type for many tests >>> * fix header size, feature table size and backing file offset >>> affected tests: 031, 036, 061, 080 >>> header_size +=8: 1 byte compression type >>> 7 bytes padding >>> feature_table += 48: incompatible feature compression type >>> backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change) >>> * add "compression type" for test output matching when it isn't filtered >>> affected tests: 049, 060, 061, 065, 144, 182, 242, 255 >>> >>> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> >>> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> >>> --- >> >> [...] >> >>> @@ -4859,6 +4949,7 @@ static ImageInfoSpecific *qcow2_get_specific_info(BlockDriverState *bs, >>> .data_file = g_strdup(s->image_data_file), >>> .has_data_file_raw = has_data_file(bs), >>> .data_file_raw = data_file_is_raw(bs), >>> + .compression_type = s->compression_type, >>> }; >>> } else { >>> /* if this assertion fails, this probably means a new version was >>> @@ -5248,6 +5339,22 @@ static int qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts, >>> "images"); >>> return -EINVAL; >>> } >>> + } else if (!strcmp(desc->name, BLOCK_OPT_COMPRESSION_TYPE)) { >>> + int compression_type = >>> + qapi_enum_parse(&Qcow2CompressionType_lookup, >>> + qemu_opt_get(opts, BLOCK_OPT_COMPRESSION_TYPE), >>> + -1, errp); >>> + >>> + if (compression_type == -EINVAL) { >> >> You should compare to -1, as qapi_enum_parse returns given default on error. > ok >> >>> + error_setg(errp, "Unknown compression type"); >> >> and errp is already set (ofcourse, if qemu_opt_get returned non NULL, but I hope it is guaranteed by if (!strcmp(desc->name, BLOCK_OPT_COMPRESSION_TYPE)) condition > I wouldn't propagate the error from qapi_enum_parse because it looks like "invalid parameter value: foo". I think it's better to print "Unknown compression type: foo" No objections. Then you should pass NULL to qapi_enum_parse instead of errp. (As you can't set errp twice, second try will crash). >> >>> + return -ENOTSUP; >>> + } >>> + >>> + if (compression_type != s->compression_type) { >>> + error_setg(errp, "Changing the compression type " >>> + "is not supported"); >>> + return -ENOTSUP; >>> + } >>> } else { >>> /* if this point is reached, this probably means a new option was >>> * added without having it covered here */ >>> @@ -5516,6 +5623,12 @@ static QemuOptsList qcow2_create_opts = { >>> .help = "Width of a reference count entry in bits", >>> .def_value_str = "16" >>> }, >>> + { >>> + .name = BLOCK_OPT_COMPRESSION_TYPE, >>> + .type = QEMU_OPT_STRING, >>> + .help = "Compression method used for image cluster compression", >>> + .def_value_str = "zlib" >>> + }, >>> { /* end of list */ } >>> } >>> }; >> >> >> [...] >> >> > -- Best regards, Vladimir ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v8 1/4] qcow2: introduce compression type feature 2020-03-23 12:26 ` Vladimir Sementsov-Ogievskiy @ 2020-03-23 12:30 ` Denis Plotnikov 0 siblings, 0 replies; 14+ messages in thread From: Denis Plotnikov @ 2020-03-23 12:30 UTC (permalink / raw) To: Vladimir Sementsov-Ogievskiy, qemu-devel Cc: kwolf, berto, qemu-block, armbru, mreitz, den On 23.03.2020 15:26, Vladimir Sementsov-Ogievskiy wrote: > 23.03.2020 15:22, Denis Plotnikov wrote: >> >> >> On 23.03.2020 11:00, Vladimir Sementsov-Ogievskiy wrote: >>> 21.03.2020 17:34, Denis Plotnikov wrote: >>>> The patch adds some preparation parts for incompatible compression >>>> type >>>> feature to qcow2 allowing the use different compression methods for >>>> image clusters (de)compressing. >>>> >>>> It is implied that the compression type is set on the image >>>> creation and >>>> can be changed only later by image conversion, thus compression type >>>> defines the only compression algorithm used for the image, and thus, >>>> for all image clusters. >>>> >>>> The goal of the feature is to add support of other compression methods >>>> to qcow2. For example, ZSTD which is more effective on compression >>>> than ZLIB. >>>> >>>> The default compression is ZLIB. Images created with ZLIB >>>> compression type >>>> are backward compatible with older qemu versions. >>>> >>>> Adding of the compression type breaks a number of tests because now >>>> the >>>> compression type is reported on image creation and there are some >>>> changes >>>> in the qcow2 header in size and offsets. >>>> >>>> The tests are fixed in the following ways: >>>> * filter out compression_type for many tests >>>> * fix header size, feature table size and backing file offset >>>> affected tests: 031, 036, 061, 080 >>>> header_size +=8: 1 byte compression type >>>> 7 bytes padding >>>> feature_table += 48: incompatible feature compression type >>>> backing_file_offset += 56 (8 + 48 -> header_change + >>>> feature_table_change) >>>> * add "compression type" for test output matching when it >>>> isn't filtered >>>> affected tests: 049, 060, 061, 065, 144, 182, 242, 255 >>>> >>>> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> >>>> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> >>>> --- >>> >>> [...] >>> >>>> @@ -4859,6 +4949,7 @@ static ImageInfoSpecific >>>> *qcow2_get_specific_info(BlockDriverState *bs, >>>> .data_file = g_strdup(s->image_data_file), >>>> .has_data_file_raw = has_data_file(bs), >>>> .data_file_raw = data_file_is_raw(bs), >>>> + .compression_type = s->compression_type, >>>> }; >>>> } else { >>>> /* if this assertion fails, this probably means a new >>>> version was >>>> @@ -5248,6 +5339,22 @@ static int >>>> qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts, >>>> "images"); >>>> return -EINVAL; >>>> } >>>> + } else if (!strcmp(desc->name, BLOCK_OPT_COMPRESSION_TYPE)) { >>>> + int compression_type = >>>> + qapi_enum_parse(&Qcow2CompressionType_lookup, >>>> + qemu_opt_get(opts, >>>> BLOCK_OPT_COMPRESSION_TYPE), >>>> + -1, errp); >>>> + >>>> + if (compression_type == -EINVAL) { >>> >>> You should compare to -1, as qapi_enum_parse returns given default >>> on error. >> ok >>> >>>> + error_setg(errp, "Unknown compression type"); >>> >>> and errp is already set (ofcourse, if qemu_opt_get returned non >>> NULL, but I hope it is guaranteed by if (!strcmp(desc->name, >>> BLOCK_OPT_COMPRESSION_TYPE)) condition >> I wouldn't propagate the error from qapi_enum_parse because it looks >> like "invalid parameter value: foo". I think it's better to print >> "Unknown compression type: foo" > > No objections. Then you should pass NULL to qapi_enum_parse instead of > errp. (As you can't set errp twice, second try will crash). ok > >>> >>>> + return -ENOTSUP; >>>> + } >>>> + >>>> + if (compression_type != s->compression_type) { >>>> + error_setg(errp, "Changing the compression type " >>>> + "is not supported"); >>>> + return -ENOTSUP; >>>> + } >>>> } else { >>>> /* if this point is reached, this probably means a >>>> new option was >>>> * added without having it covered here */ >>>> @@ -5516,6 +5623,12 @@ static QemuOptsList qcow2_create_opts = { >>>> .help = "Width of a reference count entry in bits", >>>> .def_value_str = "16" >>>> }, >>>> + { >>>> + .name = BLOCK_OPT_COMPRESSION_TYPE, >>>> + .type = QEMU_OPT_STRING, >>>> + .help = "Compression method used for image cluster >>>> compression", >>>> + .def_value_str = "zlib" >>>> + }, >>>> { /* end of list */ } >>>> } >>>> }; >>> >>> >>> [...] >>> >>> >> > > ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v8 2/4] qcow2: rework the cluster compression routine 2020-03-21 14:34 [PATCH v8 0/4] qcow2: Implement zstd cluster compression method Denis Plotnikov 2020-03-21 14:34 ` [PATCH v8 1/4] qcow2: introduce compression type feature Denis Plotnikov @ 2020-03-21 14:34 ` Denis Plotnikov 2020-03-21 14:34 ` [PATCH v8 3/4] qcow2: add zstd cluster compression Denis Plotnikov 2020-03-21 14:34 ` [PATCH v8 4/4] iotests: 287: add qcow2 compression type test Denis Plotnikov 3 siblings, 0 replies; 14+ messages in thread From: Denis Plotnikov @ 2020-03-21 14:34 UTC (permalink / raw) To: qemu-devel; +Cc: kwolf, vsementsov, berto, qemu-block, armbru, mreitz, den The patch enables processing the image compression type defined for the image and chooses an appropriate method for image clusters (de)compression. Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> --- block/qcow2-threads.c | 71 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 60 insertions(+), 11 deletions(-) diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c index a68126f291..7dbaf53489 100644 --- a/block/qcow2-threads.c +++ b/block/qcow2-threads.c @@ -74,7 +74,9 @@ typedef struct Qcow2CompressData { } Qcow2CompressData; /* - * qcow2_compress() + * qcow2_zlib_compress() + * + * Compress @src_size bytes of data using zlib compression method * * @dest - destination buffer, @dest_size bytes * @src - source buffer, @src_size bytes @@ -83,8 +85,8 @@ typedef struct Qcow2CompressData { * -ENOMEM destination buffer is not enough to store compressed data * -EIO on any other error */ -static ssize_t qcow2_compress(void *dest, size_t dest_size, - const void *src, size_t src_size) +static ssize_t qcow2_zlib_compress(void *dest, size_t dest_size, + const void *src, size_t src_size) { ssize_t ret; z_stream strm; @@ -119,10 +121,10 @@ static ssize_t qcow2_compress(void *dest, size_t dest_size, } /* - * qcow2_decompress() + * qcow2_zlib_decompress() * * Decompress some data (not more than @src_size bytes) to produce exactly - * @dest_size bytes. + * @dest_size bytes using zlib compression method * * @dest - destination buffer, @dest_size bytes * @src - source buffer, @src_size bytes @@ -130,8 +132,8 @@ static ssize_t qcow2_compress(void *dest, size_t dest_size, * Returns: 0 on success * -EIO on fail */ -static ssize_t qcow2_decompress(void *dest, size_t dest_size, - const void *src, size_t src_size) +static ssize_t qcow2_zlib_decompress(void *dest, size_t dest_size, + const void *src, size_t src_size) { int ret; z_stream strm; @@ -191,20 +193,67 @@ qcow2_co_do_compress(BlockDriverState *bs, void *dest, size_t dest_size, return arg.ret; } +/* + * qcow2_co_compress() + * + * Compress @src_size bytes of data using the compression + * method defined by the image compression type + * + * @dest - destination buffer, @dest_size bytes + * @src - source buffer, @src_size bytes + * + * Returns: compressed size on success + * a negative error code on failure + */ ssize_t coroutine_fn qcow2_co_compress(BlockDriverState *bs, void *dest, size_t dest_size, const void *src, size_t src_size) { - return qcow2_co_do_compress(bs, dest, dest_size, src, src_size, - qcow2_compress); + BDRVQcow2State *s = bs->opaque; + Qcow2CompressFunc fn; + + switch (s->compression_type) { + case QCOW2_COMPRESSION_TYPE_ZLIB: + fn = qcow2_zlib_compress; + break; + + default: + abort(); + } + + return qcow2_co_do_compress(bs, dest, dest_size, src, src_size, fn); } +/* + * qcow2_co_decompress() + * + * Decompress some data (not more than @src_size bytes) to produce exactly + * @dest_size bytes using the compression method defined by the image + * compression type + * + * @dest - destination buffer, @dest_size bytes + * @src - source buffer, @src_size bytes + * + * Returns: 0 on success + * a negative error code on failure + */ ssize_t coroutine_fn qcow2_co_decompress(BlockDriverState *bs, void *dest, size_t dest_size, const void *src, size_t src_size) { - return qcow2_co_do_compress(bs, dest, dest_size, src, src_size, - qcow2_decompress); + BDRVQcow2State *s = bs->opaque; + Qcow2CompressFunc fn; + + switch (s->compression_type) { + case QCOW2_COMPRESSION_TYPE_ZLIB: + fn = qcow2_zlib_decompress; + break; + + default: + abort(); + } + + return qcow2_co_do_compress(bs, dest, dest_size, src, src_size, fn); } -- 2.17.0 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v8 3/4] qcow2: add zstd cluster compression 2020-03-21 14:34 [PATCH v8 0/4] qcow2: Implement zstd cluster compression method Denis Plotnikov 2020-03-21 14:34 ` [PATCH v8 1/4] qcow2: introduce compression type feature Denis Plotnikov 2020-03-21 14:34 ` [PATCH v8 2/4] qcow2: rework the cluster compression routine Denis Plotnikov @ 2020-03-21 14:34 ` Denis Plotnikov 2020-03-23 8:44 ` Vladimir Sementsov-Ogievskiy 2020-03-21 14:34 ` [PATCH v8 4/4] iotests: 287: add qcow2 compression type test Denis Plotnikov 3 siblings, 1 reply; 14+ messages in thread From: Denis Plotnikov @ 2020-03-21 14:34 UTC (permalink / raw) To: qemu-devel; +Cc: kwolf, vsementsov, berto, qemu-block, armbru, mreitz, den zstd significantly reduces cluster compression time. It provides better compression performance maintaining the same level of the compression ratio in comparison with zlib, which, at the moment, is the only compression method available. The performance test results: Test compresses and decompresses qemu qcow2 image with just installed rhel-7.6 guest. Image cluster size: 64K. Image on disk size: 2.2G The test was conducted with brd disk to reduce the influence of disk subsystem to the test results. The results is given in seconds. compress cmd: time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd] src.img [zlib|zstd]_compressed.img decompress cmd time ./qemu-img convert -O qcow2 [zlib|zstd]_compressed.img uncompressed.img compression decompression zlib zstd zlib zstd ------------------------------------------------------------ real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) user 65.0 15.8 5.3 2.5 sys 3.3 0.2 2.0 2.0 Both ZLIB and ZSTD gave the same compression ratio: 1.57 compressed image size in both cases: 1.4G Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> QAPI part: Acked-by: Markus Armbruster <armbru@redhat.com> --- docs/interop/qcow2.txt | 1 + configure | 2 +- qapi/block-core.json | 3 +- block/qcow2-threads.c | 129 +++++++++++++++++++++++++++++++++++++++++ block/qcow2.c | 7 +++ 5 files changed, 140 insertions(+), 2 deletions(-) diff --git a/docs/interop/qcow2.txt b/docs/interop/qcow2.txt index 5597e24474..795dbb21dd 100644 --- a/docs/interop/qcow2.txt +++ b/docs/interop/qcow2.txt @@ -208,6 +208,7 @@ version 2. Available compression type values: 0: zlib <https://www.zlib.net/> + 1: zstd <http://github.com/facebook/zstd> === Header padding === diff --git a/configure b/configure index caa65f5883..b2a0aa241a 100755 --- a/configure +++ b/configure @@ -1835,7 +1835,7 @@ disabled with --disable-FEATURE, default is enabled if available: lzfse support of lzfse compression library (for reading lzfse-compressed dmg images) zstd support for zstd compression library - (for migration compression) + (for migration compression and qcow2 cluster compression) seccomp seccomp support coroutine-pool coroutine freelist (better performance) glusterfs GlusterFS backend diff --git a/qapi/block-core.json b/qapi/block-core.json index a306484973..8953451818 100644 --- a/qapi/block-core.json +++ b/qapi/block-core.json @@ -4401,11 +4401,12 @@ # Compression type used in qcow2 image file # # @zlib: zlib compression, see <http://zlib.net/> +# @zstd: zstd compression, see <http://github.com/facebook/zstd> # # Since: 5.0 ## { 'enum': 'Qcow2CompressionType', - 'data': [ 'zlib' ] } + 'data': [ 'zlib', { 'name': 'zstd', 'if': 'defined(CONFIG_ZSTD)' } ] } ## # @BlockdevCreateOptionsQcow2: diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c index 7dbaf53489..ee4bad8d5b 100644 --- a/block/qcow2-threads.c +++ b/block/qcow2-threads.c @@ -28,6 +28,11 @@ #define ZLIB_CONST #include <zlib.h> +#ifdef CONFIG_ZSTD +#include <zstd.h> +#include <zstd_errors.h> +#endif + #include "qcow2.h" #include "block/thread-pool.h" #include "crypto.h" @@ -166,6 +171,120 @@ static ssize_t qcow2_zlib_decompress(void *dest, size_t dest_size, return ret; } +#ifdef CONFIG_ZSTD + +/* + * qcow2_zstd_compress() + * + * Compress @src_size bytes of data using zstd compression method + * + * @dest - destination buffer, @dest_size bytes + * @src - source buffer, @src_size bytes + * + * Returns: compressed size on success + * -ENOMEM destination buffer is not enough to store compressed data + * -EIO on any other error + */ +static ssize_t qcow2_zstd_compress(void *dest, size_t dest_size, + const void *src, size_t src_size) +{ + size_t ret; + ZSTD_outBuffer output = { dest, dest_size, 0 }; + ZSTD_inBuffer input = { src, src_size, 0 }; + ZSTD_CCtx *cctx = ZSTD_createCCtx(); + + if (!cctx) { + return -EIO; + } + + ret = ZSTD_CCtx_setParameter(cctx, ZSTD_c_compressionLevel, + ZSTD_CLEVEL_DEFAULT); + if (ZSTD_isError(ret)) { + ret = -EIO; + goto out; + } + + { + /* + * Instruct zstd to compress the whole buffer and write + * the frame epilogue. This allows as to use zstd streaming + * semantics and don't store the compressed size for the + * zstd decompression. + */ + ret = ZSTD_compressStream2(cctx, &output , &input, ZSTD_e_end); + if (ZSTD_isError(ret)) { + ret = -EIO; + goto out; + } + /* Dest buffer isn't big enough to store compressed content */ + if (output.pos + ret > output.size) { + ret = -ENOMEM; + goto out; + } + } while (ret); + + /* if no error, the input data must be fully consumed */ + assert(input.pos == input.size); + /* make sure we can safely return compressed buffer size with ssize_t */ + assert(output.pos <= SSIZE_MAX); + ret = output.pos; + +out: + ZSTD_freeCCtx(cctx); + return ret; +} + +/* + * qcow2_zstd_decompress() + * + * Decompress some data (not more than @src_size bytes) to produce exactly + * @dest_size bytes using zstd compression method + * + * @dest - destination buffer, @dest_size bytes + * @src - source buffer, @src_size bytes + * + * Returns: 0 on success + * -EIO on any error + */ +static ssize_t qcow2_zstd_decompress(void *dest, size_t dest_size, + const void *src, size_t src_size) +{ + size_t ret = 0; + ZSTD_outBuffer output = { dest, dest_size, 0 }; + ZSTD_inBuffer input = { src, src_size, 0 }; + ZSTD_DCtx *dctx = ZSTD_createDCtx(); + + if (!dctx) { + return -EIO; + } + + { + ret = ZSTD_decompressStream(dctx, &output, &input); + if (ZSTD_isError(ret)) { + ret = -EIO; + goto out; + } + /* + * Dest buffer size is the image cluster size. + * It should be big enough to store uncompressed content. + * There shouldn't be any cases when the decompressed content + * size is greater then the cluster size. + */ + assert(output.pos + ret <= output.size); + } while (ret); + + /* + * If decompression went fine we must have the compressed + * cluser fully consumed and flushed + */ + assert(output.pos == output.size); +out: + ZSTD_freeDCtx(dctx); + return ret; + +} +#endif + static int qcow2_compress_pool_func(void *opaque) { Qcow2CompressData *data = opaque; @@ -217,6 +336,11 @@ qcow2_co_compress(BlockDriverState *bs, void *dest, size_t dest_size, fn = qcow2_zlib_compress; break; +#ifdef CONFIG_ZSTD + case QCOW2_COMPRESSION_TYPE_ZSTD: + fn = qcow2_zstd_compress; + break; +#endif default: abort(); } @@ -249,6 +373,11 @@ qcow2_co_decompress(BlockDriverState *bs, void *dest, size_t dest_size, fn = qcow2_zlib_decompress; break; +#ifdef CONFIG_ZSTD + case QCOW2_COMPRESSION_TYPE_ZSTD: + fn = qcow2_zstd_decompress; + break; +#endif default: abort(); } diff --git a/block/qcow2.c b/block/qcow2.c index 899b5541f5..6420d27a6d 100644 --- a/block/qcow2.c +++ b/block/qcow2.c @@ -1246,6 +1246,9 @@ static int validate_compression_type(BDRVQcow2State *s, Error **errp) { switch (s->compression_type) { case QCOW2_COMPRESSION_TYPE_ZLIB: +#ifdef CONFIG_ZSTD + case QCOW2_COMPRESSION_TYPE_ZSTD: +#endif break; default: @@ -3454,6 +3457,10 @@ qcow2_co_create(BlockdevCreateOptions *create_options, Error **errp) } switch (qcow2_opts->compression_type) { +#ifdef CONFIG_ZSTD + case QCOW2_COMPRESSION_TYPE_ZSTD: + break; +#endif default: error_setg(errp, "Unknown compression type"); goto out; -- 2.17.0 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v8 3/4] qcow2: add zstd cluster compression 2020-03-21 14:34 ` [PATCH v8 3/4] qcow2: add zstd cluster compression Denis Plotnikov @ 2020-03-23 8:44 ` Vladimir Sementsov-Ogievskiy 2020-03-23 10:20 ` Denis Plotnikov 0 siblings, 1 reply; 14+ messages in thread From: Vladimir Sementsov-Ogievskiy @ 2020-03-23 8:44 UTC (permalink / raw) To: Denis Plotnikov, qemu-devel; +Cc: kwolf, berto, qemu-block, armbru, mreitz, den 21.03.2020 17:34, Denis Plotnikov wrote: > zstd significantly reduces cluster compression time. > It provides better compression performance maintaining > the same level of the compression ratio in comparison with > zlib, which, at the moment, is the only compression > method available. > > The performance test results: > Test compresses and decompresses qemu qcow2 image with just > installed rhel-7.6 guest. > Image cluster size: 64K. Image on disk size: 2.2G > > The test was conducted with brd disk to reduce the influence > of disk subsystem to the test results. > The results is given in seconds. > > compress cmd: > time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd] > src.img [zlib|zstd]_compressed.img > decompress cmd > time ./qemu-img convert -O qcow2 > [zlib|zstd]_compressed.img uncompressed.img > > compression decompression > zlib zstd zlib zstd > ------------------------------------------------------------ > real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) > user 65.0 15.8 5.3 2.5 > sys 3.3 0.2 2.0 2.0 > > Both ZLIB and ZSTD gave the same compression ratio: 1.57 > compressed image size in both cases: 1.4G > > Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> > Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> > Reviewed-by: Alberto Garcia <berto@igalia.com> > QAPI part: > Acked-by: Markus Armbruster <armbru@redhat.com> You forget to drop signs, patch is changed significantly, including algorithm. > --- > docs/interop/qcow2.txt | 1 + > configure | 2 +- > qapi/block-core.json | 3 +- > block/qcow2-threads.c | 129 +++++++++++++++++++++++++++++++++++++++++ > block/qcow2.c | 7 +++ > 5 files changed, 140 insertions(+), 2 deletions(-) > > diff --git a/docs/interop/qcow2.txt b/docs/interop/qcow2.txt > index 5597e24474..795dbb21dd 100644 > --- a/docs/interop/qcow2.txt > +++ b/docs/interop/qcow2.txt > @@ -208,6 +208,7 @@ version 2. > > Available compression type values: > 0: zlib <https://www.zlib.net/> > + 1: zstd <http://github.com/facebook/zstd> > > > === Header padding === > diff --git a/configure b/configure > index caa65f5883..b2a0aa241a 100755 > --- a/configure > +++ b/configure > @@ -1835,7 +1835,7 @@ disabled with --disable-FEATURE, default is enabled if available: > lzfse support of lzfse compression library > (for reading lzfse-compressed dmg images) > zstd support for zstd compression library > - (for migration compression) > + (for migration compression and qcow2 cluster compression) > seccomp seccomp support > coroutine-pool coroutine freelist (better performance) > glusterfs GlusterFS backend > diff --git a/qapi/block-core.json b/qapi/block-core.json > index a306484973..8953451818 100644 > --- a/qapi/block-core.json > +++ b/qapi/block-core.json > @@ -4401,11 +4401,12 @@ > # Compression type used in qcow2 image file > # > # @zlib: zlib compression, see <http://zlib.net/> > +# @zstd: zstd compression, see <http://github.com/facebook/zstd> > # > # Since: 5.0 > ## > { 'enum': 'Qcow2CompressionType', > - 'data': [ 'zlib' ] } > + 'data': [ 'zlib', { 'name': 'zstd', 'if': 'defined(CONFIG_ZSTD)' } ] } > > ## > # @BlockdevCreateOptionsQcow2: > diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c > index 7dbaf53489..ee4bad8d5b 100644 > --- a/block/qcow2-threads.c > +++ b/block/qcow2-threads.c > @@ -28,6 +28,11 @@ > #define ZLIB_CONST > #include <zlib.h> > > +#ifdef CONFIG_ZSTD > +#include <zstd.h> > +#include <zstd_errors.h> > +#endif > + > #include "qcow2.h" > #include "block/thread-pool.h" > #include "crypto.h" > @@ -166,6 +171,120 @@ static ssize_t qcow2_zlib_decompress(void *dest, size_t dest_size, > return ret; > } > > +#ifdef CONFIG_ZSTD > + > +/* > + * qcow2_zstd_compress() > + * > + * Compress @src_size bytes of data using zstd compression method > + * > + * @dest - destination buffer, @dest_size bytes > + * @src - source buffer, @src_size bytes > + * > + * Returns: compressed size on success > + * -ENOMEM destination buffer is not enough to store compressed data > + * -EIO on any other error > + */ > +static ssize_t qcow2_zstd_compress(void *dest, size_t dest_size, > + const void *src, size_t src_size) > +{ > + size_t ret; > + ZSTD_outBuffer output = { dest, dest_size, 0 }; > + ZSTD_inBuffer input = { src, src_size, 0 }; > + ZSTD_CCtx *cctx = ZSTD_createCCtx(); > + > + if (!cctx) { > + return -EIO; > + } > + > + ret = ZSTD_CCtx_setParameter(cctx, ZSTD_c_compressionLevel, > + ZSTD_CLEVEL_DEFAULT); Hmm, looks a bit strange.. Isn't it already default by default?) > + if (ZSTD_isError(ret)) { > + ret = -EIO; > + goto out; > + } > + Hmm, strange that we need a loop, but zstd spec directly requires it, possibly we need to make a comment from it: "ZSTD spec: You must continue calling ZSTD_compressStream2() with ZSTD_e_flush until it returns 0, at which point you can change the operation." > + { > + /* > + * Instruct zstd to compress the whole buffer and write > + * the frame epilogue. This allows as to use zstd streaming > + * semantics and don't store the compressed size for the > + * zstd decompression. May be not "to don't store", but to "decompress without knowing exact compressed data length" or something like this. I mean, make the comment for people who read the final code, not for those who review changes from version to version. > + */ > + ret = ZSTD_compressStream2(cctx, &output , &input, ZSTD_e_end); extra whitespace > + if (ZSTD_isError(ret)) { > + ret = -EIO; > + goto out; > + } > + /* Dest buffer isn't big enough to store compressed content */ > + if (output.pos + ret > output.size) { > + ret = -ENOMEM; > + goto out; > + } > + } while (ret); > + > + /* if no error, the input data must be fully consumed */ > + assert(input.pos == input.size); > + /* make sure we can safely return compressed buffer size with ssize_t */ > + assert(output.pos <= SSIZE_MAX); > + ret = output.pos; > + > +out: > + ZSTD_freeCCtx(cctx); > + return ret; > +} > + > +/* > + * qcow2_zstd_decompress() > + * > + * Decompress some data (not more than @src_size bytes) to produce exactly > + * @dest_size bytes using zstd compression method > + * > + * @dest - destination buffer, @dest_size bytes > + * @src - source buffer, @src_size bytes > + * > + * Returns: 0 on success > + * -EIO on any error > + */ > +static ssize_t qcow2_zstd_decompress(void *dest, size_t dest_size, > + const void *src, size_t src_size) > +{ > + size_t ret = 0; > + ZSTD_outBuffer output = { dest, dest_size, 0 }; > + ZSTD_inBuffer input = { src, src_size, 0 }; > + ZSTD_DCtx *dctx = ZSTD_createDCtx(); > + > + if (!dctx) { > + return -EIO; > + } > + > + { > + ret = ZSTD_decompressStream(dctx, &output, &input); > + if (ZSTD_isError(ret)) { > + ret = -EIO; > + goto out; > + } > + /* > + * Dest buffer size is the image cluster size. > + * It should be big enough to store uncompressed content. > + * There shouldn't be any cases when the decompressed content > + * size is greater then the cluster size. > + */ But consider corrupted image: it may contain any data. And we should not crash because of it. So, we should return error here. > + assert(output.pos + ret <= output.size); > + } while (ret); > + > + /* > + * If decompression went fine we must have the compressed > + * cluser fully consumed and flushed cluster > + */ > + assert(output.pos == output.size); again, it should be EIO, not crash. > +out: > + ZSTD_freeDCtx(dctx); > + return ret; > + > +} > +#endif > + > static int qcow2_compress_pool_func(void *opaque) > { > Qcow2CompressData *data = opaque; > @@ -217,6 +336,11 @@ qcow2_co_compress(BlockDriverState *bs, void *dest, size_t dest_size, > fn = qcow2_zlib_compress; > break; > > +#ifdef CONFIG_ZSTD > + case QCOW2_COMPRESSION_TYPE_ZSTD: > + fn = qcow2_zstd_compress; > + break; > +#endif > default: > abort(); > } > @@ -249,6 +373,11 @@ qcow2_co_decompress(BlockDriverState *bs, void *dest, size_t dest_size, > fn = qcow2_zlib_decompress; > break; > > +#ifdef CONFIG_ZSTD > + case QCOW2_COMPRESSION_TYPE_ZSTD: > + fn = qcow2_zstd_decompress; > + break; > +#endif > default: > abort(); > } > diff --git a/block/qcow2.c b/block/qcow2.c > index 899b5541f5..6420d27a6d 100644 > --- a/block/qcow2.c > +++ b/block/qcow2.c > @@ -1246,6 +1246,9 @@ static int validate_compression_type(BDRVQcow2State *s, Error **errp) > { > switch (s->compression_type) { > case QCOW2_COMPRESSION_TYPE_ZLIB: > +#ifdef CONFIG_ZSTD > + case QCOW2_COMPRESSION_TYPE_ZSTD: > +#endif > break; > > default: > @@ -3454,6 +3457,10 @@ qcow2_co_create(BlockdevCreateOptions *create_options, Error **errp) > } > > switch (qcow2_opts->compression_type) { > +#ifdef CONFIG_ZSTD > + case QCOW2_COMPRESSION_TYPE_ZSTD: > + break; > +#endif > default: > error_setg(errp, "Unknown compression type"); > goto out; > -- Best regards, Vladimir ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v8 3/4] qcow2: add zstd cluster compression 2020-03-23 8:44 ` Vladimir Sementsov-Ogievskiy @ 2020-03-23 10:20 ` Denis Plotnikov 2020-03-23 12:05 ` Vladimir Sementsov-Ogievskiy 2020-03-23 12:47 ` Alberto Garcia 0 siblings, 2 replies; 14+ messages in thread From: Denis Plotnikov @ 2020-03-23 10:20 UTC (permalink / raw) To: Vladimir Sementsov-Ogievskiy, qemu-devel Cc: kwolf, berto, qemu-block, armbru, mreitz, den On 23.03.2020 11:44, Vladimir Sementsov-Ogievskiy wrote: > 21.03.2020 17:34, Denis Plotnikov wrote: >> zstd significantly reduces cluster compression time. >> It provides better compression performance maintaining >> the same level of the compression ratio in comparison with >> zlib, which, at the moment, is the only compression >> method available. >> >> The performance test results: >> Test compresses and decompresses qemu qcow2 image with just >> installed rhel-7.6 guest. >> Image cluster size: 64K. Image on disk size: 2.2G >> >> The test was conducted with brd disk to reduce the influence >> of disk subsystem to the test results. >> The results is given in seconds. >> >> compress cmd: >> time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd] >> src.img [zlib|zstd]_compressed.img >> decompress cmd >> time ./qemu-img convert -O qcow2 >> [zlib|zstd]_compressed.img uncompressed.img >> >> compression decompression >> zlib zstd zlib zstd >> ------------------------------------------------------------ >> real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) >> user 65.0 15.8 5.3 2.5 >> sys 3.3 0.2 2.0 2.0 >> >> Both ZLIB and ZSTD gave the same compression ratio: 1.57 >> compressed image size in both cases: 1.4G >> >> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> >> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> >> Reviewed-by: Alberto Garcia <berto@igalia.com> >> QAPI part: >> Acked-by: Markus Armbruster <armbru@redhat.com> > > You forget to drop signs, patch is changed significantly, including > algorithm. ok, my fault > >> --- >> docs/interop/qcow2.txt | 1 + >> configure | 2 +- >> qapi/block-core.json | 3 +- >> block/qcow2-threads.c | 129 +++++++++++++++++++++++++++++++++++++++++ >> block/qcow2.c | 7 +++ >> 5 files changed, 140 insertions(+), 2 deletions(-) >> >> diff --git a/docs/interop/qcow2.txt b/docs/interop/qcow2.txt >> index 5597e24474..795dbb21dd 100644 >> --- a/docs/interop/qcow2.txt >> +++ b/docs/interop/qcow2.txt >> @@ -208,6 +208,7 @@ version 2. >> Available compression type values: >> 0: zlib <https://www.zlib.net/> >> + 1: zstd <http://github.com/facebook/zstd> >> === Header padding === >> diff --git a/configure b/configure >> index caa65f5883..b2a0aa241a 100755 >> --- a/configure >> +++ b/configure >> @@ -1835,7 +1835,7 @@ disabled with --disable-FEATURE, default is >> enabled if available: >> lzfse support of lzfse compression library >> (for reading lzfse-compressed dmg images) >> zstd support for zstd compression library >> - (for migration compression) >> + (for migration compression and qcow2 cluster >> compression) >> seccomp seccomp support >> coroutine-pool coroutine freelist (better performance) >> glusterfs GlusterFS backend >> diff --git a/qapi/block-core.json b/qapi/block-core.json >> index a306484973..8953451818 100644 >> --- a/qapi/block-core.json >> +++ b/qapi/block-core.json >> @@ -4401,11 +4401,12 @@ >> # Compression type used in qcow2 image file >> # >> # @zlib: zlib compression, see <http://zlib.net/> >> +# @zstd: zstd compression, see <http://github.com/facebook/zstd> >> # >> # Since: 5.0 >> ## >> { 'enum': 'Qcow2CompressionType', >> - 'data': [ 'zlib' ] } >> + 'data': [ 'zlib', { 'name': 'zstd', 'if': 'defined(CONFIG_ZSTD)' } >> ] } >> ## >> # @BlockdevCreateOptionsQcow2: >> diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c >> index 7dbaf53489..ee4bad8d5b 100644 >> --- a/block/qcow2-threads.c >> +++ b/block/qcow2-threads.c >> @@ -28,6 +28,11 @@ >> #define ZLIB_CONST >> #include <zlib.h> >> +#ifdef CONFIG_ZSTD >> +#include <zstd.h> >> +#include <zstd_errors.h> >> +#endif >> + >> #include "qcow2.h" >> #include "block/thread-pool.h" >> #include "crypto.h" >> @@ -166,6 +171,120 @@ static ssize_t qcow2_zlib_decompress(void >> *dest, size_t dest_size, >> return ret; >> } >> +#ifdef CONFIG_ZSTD >> + >> +/* >> + * qcow2_zstd_compress() >> + * >> + * Compress @src_size bytes of data using zstd compression method >> + * >> + * @dest - destination buffer, @dest_size bytes >> + * @src - source buffer, @src_size bytes >> + * >> + * Returns: compressed size on success >> + * -ENOMEM destination buffer is not enough to store >> compressed data >> + * -EIO on any other error >> + */ >> +static ssize_t qcow2_zstd_compress(void *dest, size_t dest_size, >> + const void *src, size_t src_size) >> +{ >> + size_t ret; >> + ZSTD_outBuffer output = { dest, dest_size, 0 }; >> + ZSTD_inBuffer input = { src, src_size, 0 }; >> + ZSTD_CCtx *cctx = ZSTD_createCCtx(); >> + >> + if (!cctx) { >> + return -EIO; >> + } >> + >> + ret = ZSTD_CCtx_setParameter(cctx, ZSTD_c_compressionLevel, >> + ZSTD_CLEVEL_DEFAULT); > > Hmm, looks a bit strange.. Isn't it already default by default?) Should I remove it? Doesn't worth to express that explicitly? This line removes the question what compression level is used. And gives a hint where to change it ,if we decide to implement compression ratio changing. > >> + if (ZSTD_isError(ret)) { >> + ret = -EIO; >> + goto out; >> + } >> + > > Hmm, strange that we need a loop, but zstd spec directly requires it, > possibly we need to make a comment from it: > > "ZSTD spec: You must continue calling ZSTD_compressStream2() with > ZSTD_e_flush until it returns 0, at which point you can change the > operation." ok > >> + { >> + /* >> + * Instruct zstd to compress the whole buffer and write >> + * the frame epilogue. This allows as to use zstd streaming >> + * semantics and don't store the compressed size for the >> + * zstd decompression. > > May be not "to don't store", but to "decompress without knowing exact > compressed data length" or something like this. I mean, make the > comment for people who read the final code, not for those who review > changes from version to version. I'd better write * zstd simple interface requires exact compressed size. * zstd stream interface holds all the data in the compressed frame. * Instruct zstd to compress the whole buffer and write * the frame epilogue. This allows as to use zstd streaming * semantics and don't store the compressed size for the * zstd decompression. > >> + */ >> + ret = ZSTD_compressStream2(cctx, &output , &input, ZSTD_e_end); > > extra whitespace > >> + if (ZSTD_isError(ret)) { >> + ret = -EIO; >> + goto out; >> + } >> + /* Dest buffer isn't big enough to store compressed content */ >> + if (output.pos + ret > output.size) { >> + ret = -ENOMEM; >> + goto out; >> + } >> + } while (ret); >> + >> + /* if no error, the input data must be fully consumed */ >> + assert(input.pos == input.size); >> + /* make sure we can safely return compressed buffer size with >> ssize_t */ >> + assert(output.pos <= SSIZE_MAX); >> + ret = output.pos; >> + >> +out: >> + ZSTD_freeCCtx(cctx); >> + return ret; >> +} >> + >> +/* >> + * qcow2_zstd_decompress() >> + * >> + * Decompress some data (not more than @src_size bytes) to produce >> exactly >> + * @dest_size bytes using zstd compression method >> + * >> + * @dest - destination buffer, @dest_size bytes >> + * @src - source buffer, @src_size bytes >> + * >> + * Returns: 0 on success >> + * -EIO on any error >> + */ >> +static ssize_t qcow2_zstd_decompress(void *dest, size_t dest_size, >> + const void *src, size_t src_size) >> +{ >> + size_t ret = 0; >> + ZSTD_outBuffer output = { dest, dest_size, 0 }; >> + ZSTD_inBuffer input = { src, src_size, 0 }; >> + ZSTD_DCtx *dctx = ZSTD_createDCtx(); >> + >> + if (!dctx) { >> + return -EIO; >> + } >> + >> + { >> + ret = ZSTD_decompressStream(dctx, &output, &input); >> + if (ZSTD_isError(ret)) { >> + ret = -EIO; >> + goto out; >> + } >> + /* >> + * Dest buffer size is the image cluster size. >> + * It should be big enough to store uncompressed content. >> + * There shouldn't be any cases when the decompressed content >> + * size is greater then the cluster size. >> + */ > > But consider corrupted image: it may contain any data. And we should > not crash because of it. So, we should return error here. If the image is corrupted we can't continue anyway. If we return -EIO on this condition, we need to do some work investigating what has happened. Assert explicitly points out what happened. I though we should return -EIO if we know what to do with the error. But if the invariant doesn't hold, do we really know what to do rather then stop the execution and report an error? > >> + assert(output.pos + ret <= output.size); >> + } while (ret); >> + >> + /* >> + * If decompression went fine we must have the compressed >> + * cluser fully consumed and flushed > > cluster > >> + */ >> + assert(output.pos == output.size); > > again, it should be EIO, not crash. > >> +out: >> + ZSTD_freeDCtx(dctx); >> + return ret; >> + >> +} >> +#endif >> + >> static int qcow2_compress_pool_func(void *opaque) >> { >> Qcow2CompressData *data = opaque; >> @@ -217,6 +336,11 @@ qcow2_co_compress(BlockDriverState *bs, void >> *dest, size_t dest_size, >> fn = qcow2_zlib_compress; >> break; >> +#ifdef CONFIG_ZSTD >> + case QCOW2_COMPRESSION_TYPE_ZSTD: >> + fn = qcow2_zstd_compress; >> + break; >> +#endif >> default: >> abort(); >> } >> @@ -249,6 +373,11 @@ qcow2_co_decompress(BlockDriverState *bs, void >> *dest, size_t dest_size, >> fn = qcow2_zlib_decompress; >> break; >> +#ifdef CONFIG_ZSTD >> + case QCOW2_COMPRESSION_TYPE_ZSTD: >> + fn = qcow2_zstd_decompress; >> + break; >> +#endif >> default: >> abort(); >> } >> diff --git a/block/qcow2.c b/block/qcow2.c >> index 899b5541f5..6420d27a6d 100644 >> --- a/block/qcow2.c >> +++ b/block/qcow2.c >> @@ -1246,6 +1246,9 @@ static int >> validate_compression_type(BDRVQcow2State *s, Error **errp) >> { >> switch (s->compression_type) { >> case QCOW2_COMPRESSION_TYPE_ZLIB: >> +#ifdef CONFIG_ZSTD >> + case QCOW2_COMPRESSION_TYPE_ZSTD: >> +#endif >> break; >> default: >> @@ -3454,6 +3457,10 @@ qcow2_co_create(BlockdevCreateOptions >> *create_options, Error **errp) >> } >> switch (qcow2_opts->compression_type) { >> +#ifdef CONFIG_ZSTD >> + case QCOW2_COMPRESSION_TYPE_ZSTD: >> + break; >> +#endif >> default: >> error_setg(errp, "Unknown compression type"); >> goto out; >> > > ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v8 3/4] qcow2: add zstd cluster compression 2020-03-23 10:20 ` Denis Plotnikov @ 2020-03-23 12:05 ` Vladimir Sementsov-Ogievskiy 2020-03-23 12:47 ` Alberto Garcia 1 sibling, 0 replies; 14+ messages in thread From: Vladimir Sementsov-Ogievskiy @ 2020-03-23 12:05 UTC (permalink / raw) To: Denis Plotnikov, qemu-devel; +Cc: kwolf, berto, qemu-block, armbru, mreitz, den 23.03.2020 13:20, Denis Plotnikov wrote: > > > On 23.03.2020 11:44, Vladimir Sementsov-Ogievskiy wrote: >> 21.03.2020 17:34, Denis Plotnikov wrote: >>> zstd significantly reduces cluster compression time. >>> It provides better compression performance maintaining >>> the same level of the compression ratio in comparison with >>> zlib, which, at the moment, is the only compression >>> method available. >>> >>> The performance test results: >>> Test compresses and decompresses qemu qcow2 image with just >>> installed rhel-7.6 guest. >>> Image cluster size: 64K. Image on disk size: 2.2G >>> >>> The test was conducted with brd disk to reduce the influence >>> of disk subsystem to the test results. >>> The results is given in seconds. >>> >>> compress cmd: >>> time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd] >>> src.img [zlib|zstd]_compressed.img >>> decompress cmd >>> time ./qemu-img convert -O qcow2 >>> [zlib|zstd]_compressed.img uncompressed.img >>> >>> compression decompression >>> zlib zstd zlib zstd >>> ------------------------------------------------------------ >>> real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) >>> user 65.0 15.8 5.3 2.5 >>> sys 3.3 0.2 2.0 2.0 >>> >>> Both ZLIB and ZSTD gave the same compression ratio: 1.57 >>> compressed image size in both cases: 1.4G >>> >>> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> >>> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> >>> Reviewed-by: Alberto Garcia <berto@igalia.com> >>> QAPI part: >>> Acked-by: Markus Armbruster <armbru@redhat.com> >> >> You forget to drop signs, patch is changed significantly, including algorithm. > ok, my fault >> >>> --- >>> docs/interop/qcow2.txt | 1 + >>> configure | 2 +- >>> qapi/block-core.json | 3 +- >>> block/qcow2-threads.c | 129 +++++++++++++++++++++++++++++++++++++++++ >>> block/qcow2.c | 7 +++ >>> 5 files changed, 140 insertions(+), 2 deletions(-) >>> >>> diff --git a/docs/interop/qcow2.txt b/docs/interop/qcow2.txt >>> index 5597e24474..795dbb21dd 100644 >>> --- a/docs/interop/qcow2.txt >>> +++ b/docs/interop/qcow2.txt >>> @@ -208,6 +208,7 @@ version 2. >>> Available compression type values: >>> 0: zlib <https://www.zlib.net/> >>> + 1: zstd <http://github.com/facebook/zstd> >>> === Header padding === >>> diff --git a/configure b/configure >>> index caa65f5883..b2a0aa241a 100755 >>> --- a/configure >>> +++ b/configure >>> @@ -1835,7 +1835,7 @@ disabled with --disable-FEATURE, default is enabled if available: >>> lzfse support of lzfse compression library >>> (for reading lzfse-compressed dmg images) >>> zstd support for zstd compression library >>> - (for migration compression) >>> + (for migration compression and qcow2 cluster compression) >>> seccomp seccomp support >>> coroutine-pool coroutine freelist (better performance) >>> glusterfs GlusterFS backend >>> diff --git a/qapi/block-core.json b/qapi/block-core.json >>> index a306484973..8953451818 100644 >>> --- a/qapi/block-core.json >>> +++ b/qapi/block-core.json >>> @@ -4401,11 +4401,12 @@ >>> # Compression type used in qcow2 image file >>> # >>> # @zlib: zlib compression, see <http://zlib.net/> >>> +# @zstd: zstd compression, see <http://github.com/facebook/zstd> >>> # >>> # Since: 5.0 >>> ## >>> { 'enum': 'Qcow2CompressionType', >>> - 'data': [ 'zlib' ] } >>> + 'data': [ 'zlib', { 'name': 'zstd', 'if': 'defined(CONFIG_ZSTD)' } ] } >>> ## >>> # @BlockdevCreateOptionsQcow2: >>> diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c >>> index 7dbaf53489..ee4bad8d5b 100644 >>> --- a/block/qcow2-threads.c >>> +++ b/block/qcow2-threads.c >>> @@ -28,6 +28,11 @@ >>> #define ZLIB_CONST >>> #include <zlib.h> >>> +#ifdef CONFIG_ZSTD >>> +#include <zstd.h> >>> +#include <zstd_errors.h> >>> +#endif >>> + >>> #include "qcow2.h" >>> #include "block/thread-pool.h" >>> #include "crypto.h" >>> @@ -166,6 +171,120 @@ static ssize_t qcow2_zlib_decompress(void *dest, size_t dest_size, >>> return ret; >>> } >>> +#ifdef CONFIG_ZSTD >>> + >>> +/* >>> + * qcow2_zstd_compress() >>> + * >>> + * Compress @src_size bytes of data using zstd compression method >>> + * >>> + * @dest - destination buffer, @dest_size bytes >>> + * @src - source buffer, @src_size bytes >>> + * >>> + * Returns: compressed size on success >>> + * -ENOMEM destination buffer is not enough to store compressed data >>> + * -EIO on any other error >>> + */ >>> +static ssize_t qcow2_zstd_compress(void *dest, size_t dest_size, >>> + const void *src, size_t src_size) >>> +{ >>> + size_t ret; >>> + ZSTD_outBuffer output = { dest, dest_size, 0 }; >>> + ZSTD_inBuffer input = { src, src_size, 0 }; >>> + ZSTD_CCtx *cctx = ZSTD_createCCtx(); >>> + >>> + if (!cctx) { >>> + return -EIO; >>> + } >>> + >>> + ret = ZSTD_CCtx_setParameter(cctx, ZSTD_c_compressionLevel, >>> + ZSTD_CLEVEL_DEFAULT); >> >> Hmm, looks a bit strange.. Isn't it already default by default?) > Should I remove it? Doesn't worth to express that explicitly? This line removes the question what compression level is used. No it doesn't, as we don't know the constant, neither we have guarantee that it is the same in different version of library.. I'd drop it if it changes nothing. > And gives a hint where to change it ,if we decide to implement compression ratio changing. >> >>> + if (ZSTD_isError(ret)) { >>> + ret = -EIO; >>> + goto out; >>> + } >>> + >> >> Hmm, strange that we need a loop, but zstd spec directly requires it, possibly we need to make a comment from it: >> >> "ZSTD spec: You must continue calling ZSTD_compressStream2() with ZSTD_e_flush until it returns 0, at which point you can change the operation." > ok >> >>> + { >>> + /* >>> + * Instruct zstd to compress the whole buffer and write >>> + * the frame epilogue. This allows as to use zstd streaming >>> + * semantics and don't store the compressed size for the >>> + * zstd decompression. >> >> May be not "to don't store", but to "decompress without knowing exact compressed data length" or something like this. I mean, make the comment for people who read the final code, not for those who review changes from version to version. > I'd better write > > * zstd simple interface requires exact compressed size. > * zstd stream interface holds all the data in the compressed frame. > * Instruct zstd to compress the whole buffer and write > * the frame epilogue. This allows as to use zstd streaming > * semantics and don't store the compressed size for the > * zstd decompression. >> >>> + */ >>> + ret = ZSTD_compressStream2(cctx, &output , &input, ZSTD_e_end); >> >> extra whitespace >> >>> + if (ZSTD_isError(ret)) { >>> + ret = -EIO; >>> + goto out; >>> + } >>> + /* Dest buffer isn't big enough to store compressed content */ >>> + if (output.pos + ret > output.size) { >>> + ret = -ENOMEM; >>> + goto out; >>> + } >>> + } while (ret); >>> + >>> + /* if no error, the input data must be fully consumed */ >>> + assert(input.pos == input.size); >>> + /* make sure we can safely return compressed buffer size with ssize_t */ >>> + assert(output.pos <= SSIZE_MAX); >>> + ret = output.pos; >>> + >>> +out: >>> + ZSTD_freeCCtx(cctx); >>> + return ret; >>> +} >>> + >>> +/* >>> + * qcow2_zstd_decompress() >>> + * >>> + * Decompress some data (not more than @src_size bytes) to produce exactly >>> + * @dest_size bytes using zstd compression method >>> + * >>> + * @dest - destination buffer, @dest_size bytes >>> + * @src - source buffer, @src_size bytes >>> + * >>> + * Returns: 0 on success >>> + * -EIO on any error >>> + */ >>> +static ssize_t qcow2_zstd_decompress(void *dest, size_t dest_size, >>> + const void *src, size_t src_size) >>> +{ >>> + size_t ret = 0; >>> + ZSTD_outBuffer output = { dest, dest_size, 0 }; >>> + ZSTD_inBuffer input = { src, src_size, 0 }; >>> + ZSTD_DCtx *dctx = ZSTD_createDCtx(); >>> + >>> + if (!dctx) { >>> + return -EIO; >>> + } >>> + >>> + { >>> + ret = ZSTD_decompressStream(dctx, &output, &input); >>> + if (ZSTD_isError(ret)) { >>> + ret = -EIO; >>> + goto out; >>> + } >>> + /* >>> + * Dest buffer size is the image cluster size. >>> + * It should be big enough to store uncompressed content. >>> + * There shouldn't be any cases when the decompressed content >>> + * size is greater then the cluster size. >>> + */ >> >> But consider corrupted image: it may contain any data. And we should not crash because of it. So, we should return error here. > If the image is corrupted we can't continue anyway. If we return -EIO on this condition, we need to do some work investigating what has happened. Assert explicitly points out what happened. I though we should return -EIO if we know what to do with the error. But if the invariant doesn't hold, do we really know what to do rather then stop the execution and report an error? If only one compressed cluster is corrupted because of one changed byte, it's not a reason to crash the whole program. We still can read another clusters. You already return EIO on ZSTD failure, which includes some kind of corrupted image of course. What to do with error - nothing. This cluster is corrupted, unreadable. Why not? Real devices may have corrupted clusters too. >> >>> + assert(output.pos + ret <= output.size); >>> + } while (ret); >>> + >>> + /* >>> + * If decompression went fine we must have the compressed >>> + * cluser fully consumed and flushed >> >> cluster >> >>> + */ >>> + assert(output.pos == output.size); >> >> again, it should be EIO, not crash. >> >>> +out: >>> + ZSTD_freeDCtx(dctx); >>> + return ret; >>> + >>> +} >>> +#endif >>> + >>> static int qcow2_compress_pool_func(void *opaque) >>> { >>> Qcow2CompressData *data = opaque; >>> @@ -217,6 +336,11 @@ qcow2_co_compress(BlockDriverState *bs, void *dest, size_t dest_size, >>> fn = qcow2_zlib_compress; >>> break; >>> +#ifdef CONFIG_ZSTD >>> + case QCOW2_COMPRESSION_TYPE_ZSTD: >>> + fn = qcow2_zstd_compress; >>> + break; >>> +#endif >>> default: >>> abort(); >>> } >>> @@ -249,6 +373,11 @@ qcow2_co_decompress(BlockDriverState *bs, void *dest, size_t dest_size, >>> fn = qcow2_zlib_decompress; >>> break; >>> +#ifdef CONFIG_ZSTD >>> + case QCOW2_COMPRESSION_TYPE_ZSTD: >>> + fn = qcow2_zstd_decompress; >>> + break; >>> +#endif >>> default: >>> abort(); >>> } >>> diff --git a/block/qcow2.c b/block/qcow2.c >>> index 899b5541f5..6420d27a6d 100644 >>> --- a/block/qcow2.c >>> +++ b/block/qcow2.c >>> @@ -1246,6 +1246,9 @@ static int validate_compression_type(BDRVQcow2State *s, Error **errp) >>> { >>> switch (s->compression_type) { >>> case QCOW2_COMPRESSION_TYPE_ZLIB: >>> +#ifdef CONFIG_ZSTD >>> + case QCOW2_COMPRESSION_TYPE_ZSTD: >>> +#endif >>> break; >>> default: >>> @@ -3454,6 +3457,10 @@ qcow2_co_create(BlockdevCreateOptions *create_options, Error **errp) >>> } >>> switch (qcow2_opts->compression_type) { >>> +#ifdef CONFIG_ZSTD >>> + case QCOW2_COMPRESSION_TYPE_ZSTD: >>> + break; >>> +#endif >>> default: >>> error_setg(errp, "Unknown compression type"); >>> goto out; >>> >> >> > -- Best regards, Vladimir ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v8 3/4] qcow2: add zstd cluster compression 2020-03-23 10:20 ` Denis Plotnikov 2020-03-23 12:05 ` Vladimir Sementsov-Ogievskiy @ 2020-03-23 12:47 ` Alberto Garcia 2020-03-23 12:55 ` Denis Plotnikov 1 sibling, 1 reply; 14+ messages in thread From: Alberto Garcia @ 2020-03-23 12:47 UTC (permalink / raw) To: Denis Plotnikov, Vladimir Sementsov-Ogievskiy, qemu-devel Cc: kwolf, den, armbru, qemu-block, mreitz On Mon 23 Mar 2020 11:20:42 AM CET, Denis Plotnikov wrote: >> But consider corrupted image: it may contain any data. And we should >> not crash because of it. So, we should return error here. > If the image is corrupted we can't continue anyway. If we return -EIO > on this condition, we need to do some work investigating what has > happened. Cannot you just mark the image as corrupted and return -EIO ? I also don't think that we should crash QEMU because of malformed input data. Berto ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v8 3/4] qcow2: add zstd cluster compression 2020-03-23 12:47 ` Alberto Garcia @ 2020-03-23 12:55 ` Denis Plotnikov 0 siblings, 0 replies; 14+ messages in thread From: Denis Plotnikov @ 2020-03-23 12:55 UTC (permalink / raw) To: Alberto Garcia, Vladimir Sementsov-Ogievskiy, qemu-devel Cc: kwolf, den, armbru, qemu-block, mreitz On 23.03.2020 15:47, Alberto Garcia wrote: > On Mon 23 Mar 2020 11:20:42 AM CET, Denis Plotnikov wrote: >>> But consider corrupted image: it may contain any data. And we should >>> not crash because of it. So, we should return error here. >> If the image is corrupted we can't continue anyway. If we return -EIO >> on this condition, we need to do some work investigating what has >> happened. > Cannot you just mark the image as corrupted and return -EIO ? I also > don't think that we should crash QEMU because of malformed input data. > > Berto ok, will return -EIO ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v8 4/4] iotests: 287: add qcow2 compression type test 2020-03-21 14:34 [PATCH v8 0/4] qcow2: Implement zstd cluster compression method Denis Plotnikov ` (2 preceding siblings ...) 2020-03-21 14:34 ` [PATCH v8 3/4] qcow2: add zstd cluster compression Denis Plotnikov @ 2020-03-21 14:34 ` Denis Plotnikov 3 siblings, 0 replies; 14+ messages in thread From: Denis Plotnikov @ 2020-03-21 14:34 UTC (permalink / raw) To: qemu-devel; +Cc: kwolf, vsementsov, berto, qemu-block, armbru, mreitz, den The test checks fulfilling qcow2 requiriements for the compression type feature and zstd compression type operability. Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> --- tests/qemu-iotests/287 | 128 +++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/287.out | 43 +++++++++++++ tests/qemu-iotests/group | 1 + 3 files changed, 172 insertions(+) create mode 100755 tests/qemu-iotests/287 create mode 100644 tests/qemu-iotests/287.out diff --git a/tests/qemu-iotests/287 b/tests/qemu-iotests/287 new file mode 100755 index 0000000000..49d15b3d43 --- /dev/null +++ b/tests/qemu-iotests/287 @@ -0,0 +1,128 @@ +#!/usr/bin/env bash +# +# Test case for an image using zstd compression +# +# Copyright (c) 2020 Virtuozzo International GmbH +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +# creator +owner=dplotnikov@virtuozzo.com + +seq="$(basename $0)" +echo "QA output created by $seq" + +status=1 # failure is the default! + +_cleanup() +{ + _cleanup_test_img +} +trap "_cleanup; exit \$status" 0 1 2 3 15 + +# standard environment +. ./common.rc +. ./common.filter + +# This tests qocw2-specific low-level functionality +_supported_fmt qcow2 +_supported_proto file +_supported_os Linux + +# for all the cases +CLUSTER_SIZE=65536 + +# Check if we can run this test. + +IMGOPTS='compression_type=zstd' _make_test_img 64M | grep "Invalid parameter 'zstd'" 2>&1 1>/dev/null + +ZSTD_SUPPORTED=$? + +if (($ZSTD_SUPPORTED==0)); then + _notrun "ZSTD is disabled" +fi + +# Test: when compression is zlib the incompatible bit is unset +echo +echo "=== Testing compression type incompatible bit setting for zlib ===" +echo + +IMGOPTS='compression_type=zlib' _make_test_img 64M +$PYTHON qcow2.py "$TEST_IMG" dump-header | grep incompatible_features + +# Test: when compression differs from zlib the incompatible bit is set +echo +echo "=== Testing compression type incompatible bit setting for zstd ===" +echo + +IMGOPTS='compression_type=zstd' _make_test_img 64M +$PYTHON qcow2.py "$TEST_IMG" dump-header | grep incompatible_features + +# Test: an image can't be openned if compression type is zlib and +# incompatible feature compression type is set +echo +echo "=== Testing zlib with incompatible bit set ===" +echo + +IMGOPTS='compression_type=zlib' _make_test_img 64M +$PYTHON qcow2.py "$TEST_IMG" set-feature-bit incompatible 3 +# to make sure the bit was actually set +$PYTHON qcow2.py "$TEST_IMG" dump-header | grep incompatible_features +$QEMU_IMG info "$TEST_IMG" 2>1 1>/dev/null +if (($?==0)); then + echo "Error: The image openned successfully. The image must not be openned" +fi + +# Test: an image can't be openned if compression type is NOT zlib and +# incompatible feature compression type is UNSET +echo +echo "=== Testing zstd with incompatible bit unset ===" +echo + +IMGOPTS='compression_type=zstd' _make_test_img 64M +$PYTHON qcow2.py "$TEST_IMG" set-header incompatible_features 0 +# to make sure the bit was actually unset +$PYTHON qcow2.py "$TEST_IMG" dump-header | grep incompatible_features +$QEMU_IMG info "$TEST_IMG" 2>1 1>/dev/null +if (($?==0)); then + echo "Error: The image openned successfully. The image must not be openned" +fi +# Test: check compression type values +echo +echo "=== Testing compression type values ===" +echo +# zlib=0 +IMGOPTS='compression_type=zlib' _make_test_img 64M +od -j104 -N1 -An -vtu1 "$TEST_IMG" + +# zstd=1 +IMGOPTS='compression_type=zstd' _make_test_img 64M +od -j104 -N1 -An -vtu1 "$TEST_IMG" + +# Test: using zstd compression, write to and read from an image +echo +echo "=== Testing reading and writing with zstd ===" +echo + +IMGOPTS='compression_type=zstd' _make_test_img 64M +$QEMU_IO -c "write -c -P 0xAC 65536 64k " "$TEST_IMG" | _filter_qemu_io +$QEMU_IO -c "read -P 0xAC 65536 65536 " "$TEST_IMG" | _filter_qemu_io +$QEMU_IO -c "read -v 131070 8 " "$TEST_IMG" | _filter_qemu_io +$QEMU_IO -c "read -v 65534 8" "$TEST_IMG" | _filter_qemu_io + +# success, all done +echo "*** done" +rm -f $seq.full +status=0 diff --git a/tests/qemu-iotests/287.out b/tests/qemu-iotests/287.out new file mode 100644 index 0000000000..8e51c3078d --- /dev/null +++ b/tests/qemu-iotests/287.out @@ -0,0 +1,43 @@ +QA output created by 287 + +=== Testing compression type incompatible bit setting for zlib === + +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 +incompatible_features [] + +=== Testing compression type incompatible bit setting for zstd === + +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 +incompatible_features [3] + +=== Testing zlib with incompatible bit set === + +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 +incompatible_features [3] + +=== Testing zstd with incompatible bit unset === + +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 +incompatible_features [] + +=== Testing compression type values === + +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 + 0 +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 + 1 + +=== Testing reading and writing with zstd === + +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 +wrote 65536/65536 bytes at offset 65536 +64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +read 65536/65536 bytes at offset 65536 +64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +0001fffe: ac ac 00 00 00 00 00 00 ........ +read 8/8 bytes at offset 131070 +8 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +0000fffe: 00 00 ac ac ac ac ac ac ........ +read 8/8 bytes at offset 65534 +8 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +*** done diff --git a/tests/qemu-iotests/group b/tests/qemu-iotests/group index 0317667695..5edbadef40 100644 --- a/tests/qemu-iotests/group +++ b/tests/qemu-iotests/group @@ -293,3 +293,4 @@ 283 auto quick 284 rw 286 rw quick +287 auto quick -- 2.17.0 ^ permalink raw reply related [flat|nested] 14+ messages in thread
end of thread, other threads:[~2020-03-23 12:56 UTC | newest] Thread overview: 14+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2020-03-21 14:34 [PATCH v8 0/4] qcow2: Implement zstd cluster compression method Denis Plotnikov 2020-03-21 14:34 ` [PATCH v8 1/4] qcow2: introduce compression type feature Denis Plotnikov 2020-03-23 8:00 ` Vladimir Sementsov-Ogievskiy 2020-03-23 12:22 ` Denis Plotnikov 2020-03-23 12:26 ` Vladimir Sementsov-Ogievskiy 2020-03-23 12:30 ` Denis Plotnikov 2020-03-21 14:34 ` [PATCH v8 2/4] qcow2: rework the cluster compression routine Denis Plotnikov 2020-03-21 14:34 ` [PATCH v8 3/4] qcow2: add zstd cluster compression Denis Plotnikov 2020-03-23 8:44 ` Vladimir Sementsov-Ogievskiy 2020-03-23 10:20 ` Denis Plotnikov 2020-03-23 12:05 ` Vladimir Sementsov-Ogievskiy 2020-03-23 12:47 ` Alberto Garcia 2020-03-23 12:55 ` Denis Plotnikov 2020-03-21 14:34 ` [PATCH v8 4/4] iotests: 287: add qcow2 compression type test Denis Plotnikov
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.