[v2 1/3] ASoC: rt5682: Add a property for DMIC clock rate setting

[v2 1/3] ASoC: rt5682: Add a property for DMIC clock rate setting

[Oder Chiou]

The patch adds a property for DMIC clock rate setting and changes the
default clock rate to the common optimize DMIC clock rate.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
---
 include/sound/rt5682.h    | 1 +
 sound/soc/codecs/rt5682.c | 9 +++++++--
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/include/sound/rt5682.h b/include/sound/rt5682.h
index 6bf0e3581056..96b268ac96bd 100644
--- a/include/sound/rt5682.h
+++ b/include/sound/rt5682.h
@@ -38,6 +38,7 @@ struct rt5682_platform_data {
 	enum rt5682_dmic1_clk_pin dmic1_clk_pin;
 	enum rt5682_jd_src jd_src;
 	unsigned int btndet_delay;
+	unsigned int dmic_clk_rate;
 
 	const char *dai_clk_names[RT5682_DAI_NUM_CLKS];
 };
diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index 2ee01e782fe0..c9e6f287424b 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -1231,10 +1231,13 @@ static int set_dmic_clk(struct snd_soc_dapm_widget *w,
 	struct snd_soc_component *component =
 		snd_soc_dapm_to_component(w->dapm);
 	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
-	int idx = -EINVAL;
+	int idx = -EINVAL, dmic_clk_rate = 3072000;
 	static const int div[] = {2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128};
 
-	idx = rt5682_div_sel(rt5682, 1500000, div, ARRAY_SIZE(div));
+	if (rt5682->pdata.dmic_clk_rate)
+		dmic_clk_rate = rt5682->pdata.dmic_clk_rate;
+
+	idx = rt5682_div_sel(rt5682, dmic_clk_rate, div, ARRAY_SIZE(div));
 
 	snd_soc_component_update_bits(component, RT5682_DMIC_CTRL_1,
 		RT5682_DMIC_CLK_MASK, idx << RT5682_DMIC_CLK_SFT);
@@ -3231,6 +3234,8 @@ static int rt5682_parse_dt(struct rt5682_priv *rt5682, struct device *dev)
 		&rt5682->pdata.jd_src);
 	device_property_read_u32(dev, "realtek,btndet-delay",
 		&rt5682->pdata.btndet_delay);
+	device_property_read_u32(dev, "realtek,dmic-clk-rate",
+		&rt5682->pdata.dmic_clk_rate);
 
 	rt5682->pdata.ldo1_en = of_get_named_gpio(dev->of_node,
 		"realtek,ldo1-en-gpios", 0);
-- 
2.25.1

[v3 2/3] ASoC: rt5682: Add a property for DMIC delay

[Oder Chiou]

The patch adds a property for DMIC delay (ms) to avoid pop noise and
changes the default delay setting.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
---
 include/sound/rt5682.h    |  1 +
 sound/soc/codecs/rt5682.c | 12 +++++++++++-
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/include/sound/rt5682.h b/include/sound/rt5682.h
index 96b268ac96bd..e1f790561ac1 100644
--- a/include/sound/rt5682.h
+++ b/include/sound/rt5682.h
@@ -39,6 +39,7 @@ struct rt5682_platform_data {
 	enum rt5682_jd_src jd_src;
 	unsigned int btndet_delay;
 	unsigned int dmic_clk_rate;
+	unsigned int dmic_delay;
 
 	const char *dai_clk_names[RT5682_DAI_NUM_CLKS];
 };
diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index 20a571bfe05c..d5a9e8a48607 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -1544,10 +1544,18 @@ static int rt5682_hp_event(struct snd_soc_dapm_widget *w,
 static int set_dmic_power(struct snd_soc_dapm_widget *w,
 	struct snd_kcontrol *kcontrol, int event)
 {
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
+	unsigned int delay = 50;
+
+	if (rt5682->pdata.dmic_delay)
+		delay = rt5682->pdata.dmic_delay;
+
 	switch (event) {
 	case SND_SOC_DAPM_POST_PMU:
 		/*Add delay to avoid pop noise*/
-		msleep(150);
+		msleep(delay);
 		break;
 
 	default:
@@ -3236,6 +3244,8 @@ static int rt5682_parse_dt(struct rt5682_priv *rt5682, struct device *dev)
 		&rt5682->pdata.btndet_delay);
 	device_property_read_u32(dev, "realtek,dmic-clk-rate-hz",
 		&rt5682->pdata.dmic_clk_rate);
+	device_property_read_u32(dev, "realtek,dmic-delay-ms",
+		&rt5682->pdata.dmic_delay);
 
 	rt5682->pdata.ldo1_en = of_get_named_gpio(dev->of_node,
 		"realtek,ldo1-en-gpios", 0);
-- 
2.25.1

[v3 3/3] ASoC: rt5682: Add the descriptions for the DMIC clock rate and delay settings

[Oder Chiou]

The patch adds the descriptions for the DMIC clock rate and delay settings.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
---
 Documentation/devicetree/bindings/sound/rt5682.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt
index ac98151d29e4..ade1ece8b45f 100644
--- a/Documentation/devicetree/bindings/sound/rt5682.txt
+++ b/Documentation/devicetree/bindings/sound/rt5682.txt
@@ -38,6 +38,12 @@ Optional properties:
 - clocks : phandle and clock specifier for codec MCLK.
 - clock-names : Clock name string for 'clocks' attribute, should be "mclk".
 
+- realtek,dmic-clk-rate-hz : Set the clock rate (hz) for the requirement of
+  the particular DMIC.
+
+- realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of
+  the particular DMIC.
+
 Pins on the device (for linking into audio routes) for RT5682:
 
   * DMIC L1
-- 
2.25.1

[v3 1/3] ASoC: rt5682: Add a property for DMIC clock rate

[Oder Chiou]

The patch adds a property for DMIC clock rate (hz) and changes the
default to the common optimize DMIC clock rate.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
---
 include/sound/rt5682.h    | 1 +
 sound/soc/codecs/rt5682.c | 9 +++++++--
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/include/sound/rt5682.h b/include/sound/rt5682.h
index 6bf0e3581056..96b268ac96bd 100644
--- a/include/sound/rt5682.h
+++ b/include/sound/rt5682.h
@@ -38,6 +38,7 @@ struct rt5682_platform_data {
 	enum rt5682_dmic1_clk_pin dmic1_clk_pin;
 	enum rt5682_jd_src jd_src;
 	unsigned int btndet_delay;
+	unsigned int dmic_clk_rate;
 
 	const char *dai_clk_names[RT5682_DAI_NUM_CLKS];
 };
diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index 2ee01e782fe0..20a571bfe05c 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -1231,10 +1231,13 @@ static int set_dmic_clk(struct snd_soc_dapm_widget *w,
 	struct snd_soc_component *component =
 		snd_soc_dapm_to_component(w->dapm);
 	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
-	int idx = -EINVAL;
+	int idx = -EINVAL, dmic_clk_rate = 3072000;
 	static const int div[] = {2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128};
 
-	idx = rt5682_div_sel(rt5682, 1500000, div, ARRAY_SIZE(div));
+	if (rt5682->pdata.dmic_clk_rate)
+		dmic_clk_rate = rt5682->pdata.dmic_clk_rate;
+
+	idx = rt5682_div_sel(rt5682, dmic_clk_rate, div, ARRAY_SIZE(div));
 
 	snd_soc_component_update_bits(component, RT5682_DMIC_CTRL_1,
 		RT5682_DMIC_CLK_MASK, idx << RT5682_DMIC_CLK_SFT);
@@ -3231,6 +3234,8 @@ static int rt5682_parse_dt(struct rt5682_priv *rt5682, struct device *dev)
 		&rt5682->pdata.jd_src);
 	device_property_read_u32(dev, "realtek,btndet-delay",
 		&rt5682->pdata.btndet_delay);
+	device_property_read_u32(dev, "realtek,dmic-clk-rate-hz",
+		&rt5682->pdata.dmic_clk_rate);
 
 	rt5682->pdata.ldo1_en = of_get_named_gpio(dev->of_node,
 		"realtek,ldo1-en-gpios", 0);
-- 
2.25.1

[v3 3/3] ASoC: rt5682: Add the descriptions for the DMIC clock rate and delay settings

[Oder Chiou]

The patch adds the descriptions for the DMIC clock rate and delay settings.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
---
 Documentation/devicetree/bindings/sound/rt5682.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt
index ac98151d29e4..ade1ece8b45f 100644
--- a/Documentation/devicetree/bindings/sound/rt5682.txt
+++ b/Documentation/devicetree/bindings/sound/rt5682.txt
@@ -38,6 +38,12 @@ Optional properties:
 - clocks : phandle and clock specifier for codec MCLK.
 - clock-names : Clock name string for 'clocks' attribute, should be "mclk".
 
+- realtek,dmic-clk-rate-hz : Set the clock rate (hz) for the requirement of
+  the particular DMIC.
+
+- realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of
+  the particular DMIC.
+
 Pins on the device (for linking into audio routes) for RT5682:
 
   * DMIC L1
-- 
2.25.1