From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Jarkko Nikula <jarkko.nikula@linux.intel.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
linux-i2c@vger.kernel.org,
Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1 2/2] i2c: designware: Move configuration routines to respective modules
Date: Mon, 23 Mar 2020 12:04:51 +0200 [thread overview]
Message-ID: <20200323100451.28808-2-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20200323100451.28808-1-andriy.shevchenko@linux.intel.com>
Move configuration routines to respective modules, i.e. master and slave.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/i2c/busses/i2c-designware-core.h | 12 +++++++
drivers/i2c/busses/i2c-designware-master.c | 24 +++++++++++++
drivers/i2c/busses/i2c-designware-platdrv.c | 38 +--------------------
drivers/i2c/busses/i2c-designware-slave.c | 11 ++++++
4 files changed, 48 insertions(+), 37 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 2d34c15dca75..ba04fa91de0c 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -315,13 +315,17 @@ static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev)
void __i2c_dw_disable(struct dw_i2c_dev *dev);
#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_MASTER)
+extern void i2c_dw_configure_master(struct dw_i2c_dev *dev);
extern int i2c_dw_probe_master(struct dw_i2c_dev *dev);
#else
+static inline void i2c_dw_configure_master(struct dw_i2c_dev *dev) { }
static inline int i2c_dw_probe_master(struct dw_i2c_dev *dev) { return -EINVAL; }
#endif
#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_SLAVE)
+extern void i2c_dw_configure_slave(struct dw_i2c_dev *dev);
extern int i2c_dw_probe_slave(struct dw_i2c_dev *dev);
#else
+static inline void i2c_dw_configure_slave(struct dw_i2c_dev *dev) { }
static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; }
#endif
@@ -338,6 +342,14 @@ static inline int i2c_dw_probe(struct dw_i2c_dev *dev)
}
}
+static inline void i2c_dw_configure(struct dw_i2c_dev *dev)
+{
+ if (i2c_detect_slave_mode(dev->dev))
+ i2c_dw_configure_slave(dev);
+ else
+ i2c_dw_configure_master(dev);
+}
+
#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL)
extern int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev);
#else
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 9d2af87f45f1..66ada723d740 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -632,6 +632,30 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
return IRQ_HANDLED;
}
+void i2c_dw_configure_master(struct dw_i2c_dev *dev)
+{
+ struct i2c_timings *t = &dev->timings;
+
+ dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
+
+ dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+ DW_IC_CON_RESTART_EN;
+
+ dev->mode = DW_IC_MASTER;
+
+ switch (t->bus_freq_hz) {
+ case I2C_MAX_STANDARD_MODE_FREQ:
+ dev->master_cfg |= DW_IC_CON_SPEED_STD;
+ break;
+ case I2C_MAX_HIGH_SPEED_MODE_FREQ:
+ dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
+ break;
+ default:
+ dev->master_cfg |= DW_IC_CON_SPEED_FAST;
+ }
+}
+EXPORT_SYMBOL_GPL(i2c_dw_configure_master);
+
static void i2c_dw_prepare_recovery(struct i2c_adapter *adap)
{
struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 0edcebe2168f..6da7f14cba62 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -186,39 +186,6 @@ static inline int dw_i2c_of_configure(struct platform_device *pdev)
}
#endif
-static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
-{
- struct i2c_timings *t = &dev->timings;
-
- dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
-
- dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
- DW_IC_CON_RESTART_EN;
-
- dev->mode = DW_IC_MASTER;
-
- switch (t->bus_freq_hz) {
- case I2C_MAX_STANDARD_MODE_FREQ:
- dev->master_cfg |= DW_IC_CON_SPEED_STD;
- break;
- case I2C_MAX_HIGH_SPEED_MODE_FREQ:
- dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
- break;
- default:
- dev->master_cfg |= DW_IC_CON_SPEED_FAST;
- }
-}
-
-static void i2c_dw_configure_slave(struct dw_i2c_dev *dev)
-{
- dev->functionality = I2C_FUNC_SLAVE | DW_IC_DEFAULT_FUNCTIONALITY;
-
- dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL |
- DW_IC_CON_RESTART_EN | DW_IC_CON_STOP_DET_IFADDRESSED;
-
- dev->mode = DW_IC_SLAVE;
-}
-
static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev)
{
pm_runtime_disable(dev->dev);
@@ -323,10 +290,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
if (ret)
goto exit_reset;
- if (i2c_detect_slave_mode(&pdev->dev))
- i2c_dw_configure_slave(dev);
- else
- i2c_dw_configure_master(dev);
+ i2c_dw_configure(dev);
/* Optional interface clock */
dev->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index f5ecf76c0d02..576e7af4e94b 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -241,6 +241,17 @@ static const struct i2c_algorithm i2c_dw_algo = {
.unreg_slave = i2c_dw_unreg_slave,
};
+void i2c_dw_configure_slave(struct dw_i2c_dev *dev)
+{
+ dev->functionality = I2C_FUNC_SLAVE | DW_IC_DEFAULT_FUNCTIONALITY;
+
+ dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL |
+ DW_IC_CON_RESTART_EN | DW_IC_CON_STOP_DET_IFADDRESSED;
+
+ dev->mode = DW_IC_SLAVE;
+}
+EXPORT_SYMBOL_GPL(i2c_dw_configure_slave);
+
int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
{
struct i2c_adapter *adap = &dev->adapter;
--
2.25.1
next prev parent reply other threads:[~2020-03-23 10:04 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-23 10:04 [PATCH v1 1/2] i2c: designware: Make master module optional Andy Shevchenko
2020-03-23 10:04 ` Andy Shevchenko [this message]
2020-03-23 12:26 ` Andy Shevchenko
2020-03-25 7:47 ` Jarkko Nikula
2020-03-25 11:45 ` Andy Shevchenko
2020-04-15 11:37 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200323100451.28808-2-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=jarkko.nikula@linux.intel.com \
--cc=linux-i2c@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.