[PATCH 0/4] mfd: Add ENE KB3930 Embedded Controller driver

[PATCH 0/4] mfd: Add ENE KB3930 Embedded Controller driver

[Lubomir Rintel]

Hi,

please take a look at the following patch set and consider applying it
to the MFD tree. It is essentially a new driver with DT binding
documentation changes.

It will be used by the driver for the three status LEDs that will be
submitted separately.

Thanks,
Lubo

[PATCH 1/4] dt-bindings: Add vendor prefix for Dell Inc.

[Lubomir Rintel]

Dell makes computers and perhaps other stuff. Their web site is
http://www.dell.com/.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 0ab86d876f4d2..994857e6bcc05 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -235,6 +235,8 @@ patternProperties:
     description: DataImage, Inc.
   "^davicom,.*":
     description: DAVICOM Semiconductor, Inc.
+  "^dell,.*":
+    description: Dell Inc.
   "^delta,.*":
     description: Delta Electronics, Inc.
   "^denx,.*":
-- 
2.25.1

Re: [PATCH 1/4] dt-bindings: Add vendor prefix for Dell Inc.

[Rob Herring]

On Mon,  9 Mar 2020 21:38:15 +0100, Lubomir Rintel wrote:
> 
> Dell makes computers and perhaps other stuff. Their web site is
> http://www.dell.com/.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 

Applied, thanks.

Rob

[PATCH 2/4] dt-bindings: Add vendor prefix for ENE

[Lubomir Rintel]

ENE Technology makes embedded controllers and perhaps other stuff. Their
web site is http://www.ene.com.tw/.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 994857e6bcc05..2f289c37a788a 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -301,6 +301,8 @@ patternProperties:
     description: emtrion GmbH
   "^endless,.*":
     description: Endless Mobile, Inc.
+  "^ene,.*":
+    description: ENE Technology, Inc.
   "^energymicro,.*":
     description: Silicon Laboratories (formerly Energy Micro AS)
   "^engicam,.*":
-- 
2.25.1

Re: [PATCH 2/4] dt-bindings: Add vendor prefix for ENE

[Rob Herring]

On Mon,  9 Mar 2020 21:38:16 +0100, Lubomir Rintel wrote:
> 
> ENE Technology makes embedded controllers and perhaps other stuff. Their
> web site is http://www.ene.com.tw/.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 

Applied, thanks.

Rob

[PATCH 3/4] dt-bindings: mfd: Add ENE KB3930 Embedded Controller binding

[Lubomir Rintel]

Add binding document for the ENE KB3930 Embedded Controller.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 .../devicetree/bindings/mfd/ene-kb3930.yaml   | 46 +++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/ene-kb3930.yaml

diff --git a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
new file mode 100644
index 0000000000000..5c9009617aea2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ene-kb3930.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ENE KB3930 Embedded Controller bindings
+
+description: |
+  This binding describes the ENE KB3930 Embedded Controller attached to a
+  I2C bus.
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  compatible:
+    const: ene,kb3930
+
+  reg:
+    maxItems: 1
+
+  power-gpios:
+    description: GPIO used for the power pin
+    maxItems: 2
+
+  system-power-controller: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    embedded-controller@58 {
+      compatible = "ene,kb3930";
+      reg = <0x58>;
+      system-power-controller;
+
+      off-gpios = <&gpio 126 GPIO_ACTIVE_HIGH>,
+                  <&gpio 127 GPIO_ACTIVE_HIGH>;
+    };
+
+...
-- 
2.25.1

Re: [PATCH 3/4] dt-bindings: mfd: Add ENE KB3930 Embedded Controller binding

[Rob Herring]

On Mon,  9 Mar 2020 21:38:17 +0100, Lubomir Rintel wrote:
> 
> Add binding document for the ENE KB3930 Embedded Controller.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> ---
>  .../devicetree/bindings/mfd/ene-kb3930.yaml   | 46 +++++++++++++++++++
>  1 file changed, 46 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

Error: Documentation/devicetree/bindings/mfd/ene-kb3930.example.dts:22.34-35 syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.lib:311: recipe for target 'Documentation/devicetree/bindings/mfd/ene-kb3930.example.dt.yaml' failed
make[1]: *** [Documentation/devicetree/bindings/mfd/ene-kb3930.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
Makefile:1262: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2

See https://patchwork.ozlabs.org/patch/1251828
Please check and re-submit.

[PATCH 4/4] mfd: ene-kb3930: Add driver for ENE KB3930 Embedded Controller

[Lubomir Rintel]

This driver provides access to the EC RAM of said embedded controller
attached to the I2C bus as well as optionally supporting its slightly weird
power-off/restart protocol.

A particular implementation of the EC firmware can be identified by a
model byte. If this driver identifies the Dell Ariel platform, it
registers the appropriate cells.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 drivers/mfd/Kconfig      |  10 ++
 drivers/mfd/Makefile     |   1 +
 drivers/mfd/ene-kb3930.c | 209 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 220 insertions(+)
 create mode 100644 drivers/mfd/ene-kb3930.c

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2b203290e7b9f..d34cf1a026c86 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -398,6 +398,16 @@ config MFD_DLN2
 	  etc. must be enabled in order to use the functionality of
 	  the device.
 
+config MFD_ENE_KB3930
+	tristate "ENE KB3930 Embedded Controller support"
+	depends on I2C
+	depends on MACH_MMP3_DT || COMPILE_TEST
+	select MFD_CORE
+	help
+	  This adds support for accessing the registers on ENE KB3930, Embedded
+	  Controller. Additional drivers such as LEDS_ARIEL must be enabled in
+	  order to use the functionality of the device.
+
 config MFD_EXYNOS_LPASS
 	tristate "Samsung Exynos SoC Low Power Audio Subsystem"
 	depends on ARCH_EXYNOS || COMPILE_TEST
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b83f172545e1e..ee9a5260a26cd 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835-pm.o
 obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
 obj-$(CONFIG_MFD_BD9571MWV)	+= bd9571mwv.o
 obj-$(CONFIG_MFD_CROS_EC_DEV)	+= cros_ec_dev.o
+obj-$(CONFIG_MFD_ENE_KB3930)	+= ene-kb3930.o
 obj-$(CONFIG_MFD_EXYNOS_LPASS)	+= exynos-lpass.o
 
 obj-$(CONFIG_HTC_PASIC3)	+= htc-pasic3.o
diff --git a/drivers/mfd/ene-kb3930.c b/drivers/mfd/ene-kb3930.c
new file mode 100644
index 0000000000000..1123f3a1c816a
--- /dev/null
+++ b/drivers/mfd/ene-kb3930.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0-or-later
+/*
+ * ENE KB3930 Embedded Controller Driver
+ *
+ * Copyright (C) 2020 Lubomir Rintel
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+#include <linux/mfd/core.h>
+
+enum {
+	EC_DATA_IN	= 0x00,
+	EC_RAM_OUT	= 0x80,
+	EC_RAM_IN	= 0x81,
+};
+
+enum {
+	EC_MODEL_ID	= 0x30,
+	EC_VERSION_MAJ	= 0x31,
+	EC_VERSION_MIN	= 0x32,
+};
+
+struct kb3930 {
+	struct i2c_client *client;
+	struct regmap *ec_ram;
+	struct gpio_descs *off_gpios;
+};
+
+struct kb3930 *global_kb3930;
+
+static void kb3930_off(struct kb3930 *priv, int poweroff)
+{
+	gpiod_direction_output(priv->off_gpios->desc[1], poweroff);
+
+	while (1) {
+		mdelay(50);
+		gpiod_direction_output(priv->off_gpios->desc[0], 0);
+		mdelay(50);
+		gpiod_direction_output(priv->off_gpios->desc[0], 1);
+	}
+}
+
+static int kb3930_restart(struct notifier_block *this,
+			  unsigned long mode, void *cmd)
+{
+	kb3930_off(global_kb3930, 0);
+	return NOTIFY_DONE;
+}
+
+static void kb3930_power_off(void)
+{
+	kb3930_off(global_kb3930, 1);
+}
+
+static struct notifier_block kb3930_restart_nb = {
+	.notifier_call = kb3930_restart,
+	.priority = 128,
+};
+
+static const struct mfd_cell ariel_ec_cells[] = {
+	{ .name = "dell-wyse-ariel-led", },
+	{ .name = "dell-wyse-ariel-power", },
+};
+
+static int kb3930_ec_ram_reg_write(void *context, unsigned int reg,
+				   unsigned int val)
+{
+	struct kb3930 *priv = context;
+
+	return i2c_smbus_write_word_data(priv->client, EC_RAM_OUT,
+					 (val << 8) | reg);
+}
+
+static int kb3930_ec_ram_reg_read(void *context, unsigned int reg,
+				  unsigned int *val)
+{
+	struct kb3930 *priv = context;
+	int ret;
+
+	ret = i2c_smbus_write_word_data(priv->client, EC_RAM_IN, reg);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_word_data(priv->client, EC_DATA_IN);
+	if (ret < 0)
+		return ret;
+
+	*val = ret >> 8;
+	return 0;
+}
+
+static const struct regmap_config kb3930_ec_ram_regmap_config = {
+	.name = "ec_ram",
+	.reg_bits = 8,
+	.val_bits = 8,
+	.reg_stride = 1,
+	.max_register = 0xff,
+	.reg_write = kb3930_ec_ram_reg_write,
+	.reg_read = kb3930_ec_ram_reg_read,
+	.fast_io = false,
+};
+
+static int kb3930_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct device_node *np = dev->of_node;
+	struct kb3930 *priv;
+	unsigned int model_id;
+	int ret;
+
+	if (global_kb3930)
+		return -EEXIST;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	global_kb3930 = priv;
+	priv->client = client;
+	i2c_set_clientdata(client, priv);
+
+	priv->ec_ram = devm_regmap_init(dev, NULL, priv,
+					&kb3930_ec_ram_regmap_config);
+	if (IS_ERR(priv->ec_ram))
+		return PTR_ERR(priv->ec_ram);
+
+	ret = regmap_read(priv->ec_ram, EC_MODEL_ID, &model_id);
+	if (ret < 0)
+		return ret;
+
+	if (model_id == 'J') {
+		ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
+					   ariel_ec_cells,
+					   ARRAY_SIZE(ariel_ec_cells),
+					   NULL, 0, NULL);
+		if (ret < 0)
+			return ret;
+	} else {
+		dev_err(dev, "unknown board model: %02x\n", model_id);
+		return -ENODEV;
+	}
+
+	if (of_property_read_bool (np, "system-power-controller")) {
+		priv->off_gpios = devm_gpiod_get_array_optional(dev, "off",
+								GPIOD_IN);
+	}
+	if (IS_ERR(priv->off_gpios))
+		return PTR_ERR(priv->off_gpios);
+	if (priv->off_gpios->ndescs < 2) {
+		dev_err(dev, "invalid off-gpios property\n");
+		return -EINVAL;
+	}
+	if (priv->off_gpios) {
+		register_restart_handler(&kb3930_restart_nb);
+		if (pm_power_off == NULL)
+			pm_power_off = kb3930_power_off;
+	}
+
+	dev_info(dev, "ENE KB3930 Embedded Controller\n");
+	return 0;
+}
+
+static int kb3930_remove(struct i2c_client *client)
+{
+	struct kb3930 *priv = i2c_get_clientdata(client);
+
+	if (priv->off_gpios) {
+		if (pm_power_off == kb3930_power_off)
+			pm_power_off = NULL;
+		unregister_restart_handler(&kb3930_restart_nb);
+	}
+	global_kb3930 = NULL;
+
+	return 0;
+}
+
+static const struct i2c_device_id kb3930_ids[] = {
+	{ "kb3930", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, kb3930_ids);
+
+static const struct of_device_id kb3930_dt_ids[] = {
+	{ .compatible = "ene,kb3930" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, kb3930_dt_ids);
+
+static struct i2c_driver kb3930_driver = {
+	.probe = kb3930_probe,
+	.remove = kb3930_remove,
+	.driver = {
+		.name = "ene-kb3930",
+		.of_match_table = of_match_ptr(kb3930_dt_ids),
+	},
+	.id_table = kb3930_ids,
+};
+
+module_i2c_driver(kb3930_driver);
+
+MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
+MODULE_DESCRIPTION("ENE KB3930 Embedded Controller Driver");
+MODULE_LICENSE("Dual BSD/GPL");
-- 
2.25.1