[PATCH 1/2] dt-bindings: thermal: tsens: Fix nvmem-cell-names schema

[PATCH 1/2] dt-bindings: thermal: tsens: Fix nvmem-cell-names schema

[Rob Herring]

There's a typo 'nvmem-cells-names' in the schema which means the correct
'nvmem-cell-names' in the examples are not checked. The possible values
are wrong too both in that the 2nd entry is not specified correctly and the
values are just wrong based on the dts files in the kernel.

Fixes: a877e768f655 ("dt-bindings: thermal: tsens: Convert over to a yaml schema")
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Amit Kucheria <amit.kucheria@linaro.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/thermal/qcom-tsens.yaml          | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index eac644d9e238..7a38d2116059 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -52,13 +52,12 @@ properties:
     description:
       Reference to an nvmem node for the calibration data
 
-  nvmem-cells-names:
+  nvmem-cell-names:
     minItems: 1
     maxItems: 2
     items:
-      - enum:
-        - caldata
-        - calsel
+      - const: calib
+      - const: calib_sel
 
   "#qcom,sensors":
     allOf:
@@ -124,7 +123,7 @@ examples:
                  <0x4a8000 0x1000>; /* SROT */
 
            nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
-           nvmem-cell-names = "caldata", "calsel";
+           nvmem-cell-names = "calib", "calib_sel";
 
            interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
            interrupt-names = "uplow";
-- 
2.20.1

[PATCH 2/2] dt-bindings: thermal: tsens: Set 'additionalProperties: false'

[Rob Herring]

Ensure the node only contains the properties listed in the schema by
setting 'additionalProperties: false'. Doing this requires reworking the
interrupt properties schemas so that they are defined in the main
'properties' section.

Fixes: a877e768f655 ("dt-bindings: thermal: tsens: Convert over to a yaml schema")
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Amit Kucheria <amit.kucheria@linaro.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../bindings/thermal/qcom-tsens.yaml          | 28 ++++++++++++-------
 1 file changed, 18 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 7a38d2116059..3492447e42e9 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -46,6 +46,18 @@ properties:
       - description: TM registers
       - description: SROT registers
 
+  interrupts:
+    minItems: 1
+    items:
+      - description: Combined interrupt if upper or lower threshold crossed
+      - description: Interrupt if critical threshold crossed
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: uplow
+      - const: critical
+
   nvmem-cells:
     minItems: 1
     maxItems: 2
@@ -88,22 +100,16 @@ allOf:
     then:
       properties:
         interrupts:
-          items:
-            - description: Combined interrupt if upper or lower threshold crossed
+          maxItems: 1
         interrupt-names:
-          items:
-            - const: uplow
+          maxItems: 1
 
     else:
       properties:
         interrupts:
-          items:
-            - description: Combined interrupt if upper or lower threshold crossed
-            - description: Interrupt if critical threshold crossed
+          minItems: 2
         interrupt-names:
-          items:
-            - const: uplow
-            - const: critical
+          minItems: 2
 
 required:
   - compatible
@@ -113,6 +119,8 @@ required:
   - interrupt-names
   - "#thermal-sensor-cells"
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-- 
2.20.1

Re: [PATCH 2/2] dt-bindings: thermal: tsens: Set 'additionalProperties: false'

[Amit Kucheria]

On Tue, Mar 24, 2020 at 11:35 PM Rob Herring <robh@kernel.org> wrote:
>
> Ensure the node only contains the properties listed in the schema by
> setting 'additionalProperties: false'. Doing this requires reworking the
> interrupt properties schemas so that they are defined in the main
> 'properties' section.


Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>

> Fixes: a877e768f655 ("dt-bindings: thermal: tsens: Convert over to a yaml schema")
> Cc: Andy Gross <agross@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Amit Kucheria <amit.kucheria@linaro.org>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: linux-arm-msm@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  .../bindings/thermal/qcom-tsens.yaml          | 28 ++++++++++++-------
>  1 file changed, 18 insertions(+), 10 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> index 7a38d2116059..3492447e42e9 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -46,6 +46,18 @@ properties:
>        - description: TM registers
>        - description: SROT registers
>
> +  interrupts:
> +    minItems: 1
> +    items:
> +      - description: Combined interrupt if upper or lower threshold crossed
> +      - description: Interrupt if critical threshold crossed
> +
> +  interrupt-names:
> +    minItems: 1
> +    items:
> +      - const: uplow
> +      - const: critical
> +
>    nvmem-cells:
>      minItems: 1
>      maxItems: 2
> @@ -88,22 +100,16 @@ allOf:
>      then:
>        properties:
>          interrupts:
> -          items:
> -            - description: Combined interrupt if upper or lower threshold crossed
> +          maxItems: 1
>          interrupt-names:
> -          items:
> -            - const: uplow
> +          maxItems: 1
>
>      else:
>        properties:
>          interrupts:
> -          items:
> -            - description: Combined interrupt if upper or lower threshold crossed
> -            - description: Interrupt if critical threshold crossed
> +          minItems: 2
>          interrupt-names:
> -          items:
> -            - const: uplow
> -            - const: critical
> +          minItems: 2
>
>  required:
>    - compatible
> @@ -113,6 +119,8 @@ required:
>    - interrupt-names
>    - "#thermal-sensor-cells"
>
> +additionalProperties: false
> +
>  examples:
>    - |
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
> --
> 2.20.1
>

Re: [PATCH 2/2] dt-bindings: thermal: tsens: Set 'additionalProperties: false'

[Rob Herring]

On Tue, 24 Mar 2020 12:05:13 -0600, Rob Herring wrote:
> Ensure the node only contains the properties listed in the schema by
> setting 'additionalProperties: false'. Doing this requires reworking the
> interrupt properties schemas so that they are defined in the main
> 'properties' section.
> 
> Fixes: a877e768f655 ("dt-bindings: thermal: tsens: Convert over to a yaml schema")
> Cc: Andy Gross <agross@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Amit Kucheria <amit.kucheria@linaro.org>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: linux-arm-msm@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  .../bindings/thermal/qcom-tsens.yaml          | 28 ++++++++++++-------
>  1 file changed, 18 insertions(+), 10 deletions(-)
> 

Applied, thanks.

Rob

Re: [PATCH 1/2] dt-bindings: thermal: tsens: Fix nvmem-cell-names schema

[Amit Kucheria]

On Tue, Mar 24, 2020 at 11:35 PM Rob Herring <robh@kernel.org> wrote:
>
> There's a typo 'nvmem-cells-names' in the schema which means the correct
> 'nvmem-cell-names' in the examples are not checked. The possible values
> are wrong too both in that the 2nd entry is not specified correctly and the
> values are just wrong based on the dts files in the kernel.


Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>

> Fixes: a877e768f655 ("dt-bindings: thermal: tsens: Convert over to a yaml schema")
> Cc: Andy Gross <agross@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Amit Kucheria <amit.kucheria@linaro.org>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: linux-arm-msm@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  .../devicetree/bindings/thermal/qcom-tsens.yaml          | 9 ++++-----
>  1 file changed, 4 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> index eac644d9e238..7a38d2116059 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -52,13 +52,12 @@ properties:
>      description:
>        Reference to an nvmem node for the calibration data
>
> -  nvmem-cells-names:
> +  nvmem-cell-names:
>      minItems: 1
>      maxItems: 2
>      items:
> -      - enum:
> -        - caldata
> -        - calsel
> +      - const: calib
> +      - const: calib_sel
>
>    "#qcom,sensors":
>      allOf:
> @@ -124,7 +123,7 @@ examples:
>                   <0x4a8000 0x1000>; /* SROT */
>
>             nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
> -           nvmem-cell-names = "caldata", "calsel";
> +           nvmem-cell-names = "calib", "calib_sel";
>
>             interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
>             interrupt-names = "uplow";
> --
> 2.20.1
>

Re: [PATCH 1/2] dt-bindings: thermal: tsens: Fix nvmem-cell-names schema

[Rob Herring]

On Tue, 24 Mar 2020 12:05:12 -0600, Rob Herring wrote:
> There's a typo 'nvmem-cells-names' in the schema which means the correct
> 'nvmem-cell-names' in the examples are not checked. The possible values
> are wrong too both in that the 2nd entry is not specified correctly and the
> values are just wrong based on the dts files in the kernel.
> 
> Fixes: a877e768f655 ("dt-bindings: thermal: tsens: Convert over to a yaml schema")
> Cc: Andy Gross <agross@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Amit Kucheria <amit.kucheria@linaro.org>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: linux-arm-msm@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  .../devicetree/bindings/thermal/qcom-tsens.yaml          | 9 ++++-----
>  1 file changed, 4 insertions(+), 5 deletions(-)
> 

Applied, thanks.

Rob