Re: [PATCH] arm64: dts: update SolidRun Armada 8040 phy interface types

[Russell King - ARM Linux admin <linux@armlinux.org.uk>]

A note for Gregorii / bootlin people:

After this patch, these still remain:

arch/arm64/boot/dts/marvell/cn9131-db.dts:      phy-mode = "10gbase-kr";
arch/arm64/boot/dts/marvell/armada-7040-db.dts: phy-mode = "10gbase-kr";
arch/arm64/boot/dts/marvell/armada-8040-db.dts: phy-mode = "10gbase-kr";
arch/arm64/boot/dts/marvell/armada-8040-db.dts: phy-mode = "10gbase-kr";
arch/arm64/boot/dts/marvell/cn9132-db.dts:      phy-mode = "10gbase-kr";
arch/arm64/boot/dts/marvell/cn9130-db.dts:      phy-mode = "10gbase-kr";

Please can you check whether these should be updated, and if so also
update them?  10GBASE-KR is the backplane variant of 10GBASE-R which
involves some negotiation.

Thanks.

On Fri, Mar 27, 2020 at 12:40:42PM +0000, Russell King wrote:
> Update the SolidRun Armada 8040 platforms phy interface types from the
> old 10gbase-kr to the newer and more correct 10gbase-r.
> 
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> ---
>  arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts   | 2 +-
>  arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts | 4 ++--
>  arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts            | 4 ++--
>  3 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
> index 1e7b47affe26..006666272489 100644
> --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
> @@ -401,7 +401,7 @@
>  /* SFP */
>  &cp0_eth0 {
>  	status = "okay";
> -	phy-mode = "10gbase-kr";
> +	phy-mode = "10gbase-r";
>  	managed = "in-band-status";
>  	phys = <&cp0_comphy2 0>;
>  	sfp = <&sfp_cp0_eth0>;
> diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
> index 26114d96d637..b44f4c029b78 100644
> --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
> @@ -16,14 +16,14 @@
>  
>  &cp0_eth0 {
>  	status = "okay";
> -	phy-mode = "10gbase-kr";
> +	phy-mode = "10gbase-r";
>  	managed = "in-band-status";
>  	sfp = <&sfp_eth0>;
>  };
>  
>  &cp1_eth0 {
>  	status = "okay";
> -	phy-mode = "10gbase-kr";
> +	phy-mode = "10gbase-r";
>  	managed = "in-band-status";
>  	sfp = <&sfp_eth1>;
>  };
> diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> index 087a5502631e..42741adf867b 100644
> --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> @@ -63,14 +63,14 @@
>  	status = "okay";
>  	/* Network PHY */
>  	phy = <&phy0>;
> -	phy-mode = "10gbase-kr";
> +	phy-mode = "10gbase-r";
>  };
>  
>  &cp1_eth0 {
>  	status = "okay";
>  	/* Network PHY */
>  	phy = <&phy8>;
> -	phy-mode = "10gbase-kr";
> +	phy-mode = "10gbase-r";
>  };
>  
>  &cp1_pinctrl {
> -- 
> 2.20.1
> 
> 

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel