From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: a.zummo@towertech.it, robh+dt@kernel.org, mark.rutland@arm.com,
nicolas.ferre@microchip.com, ludovic.desroches@microchip.com,
tglx@linutronix.de, jason@lakedaemon.net, maz@kernel.org,
linux-rtc@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 5/5] rtc: at91sam9: add microchip,sam9x60-rtt
Date: Fri, 10 Apr 2020 19:41:13 +0200 [thread overview]
Message-ID: <20200410174113.GZ3628@piout.net> (raw)
In-Reply-To: <1586536019-12348-6-git-send-email-claudiu.beznea@microchip.com>
Hi,
This patch must come first. Also, the correct prefix is
dt-bindings: rtc:
On 10/04/2020 19:26:59+0300, Claudiu Beznea wrote:
> Add microchip,sam9x60-rtt to compatible list.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
> Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
> index 6ae79d1843f3..b2f913ff6c69 100644
> --- a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
> +++ b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
> @@ -1,7 +1,7 @@
> Atmel AT91SAM9260 Real Time Timer
>
> Required properties:
> -- compatible: should be: "atmel,at91sam9260-rtt"
> +- compatible: should be: "atmel,at91sam9260-rtt" or "microchip,sam9x60-rtt"
If you had a fallback on atmel,at91sam9260-rtt, this would make merging
this series easier as this removes the need for 1/5 and 2/5.
I think 2/5 may be useful in the future but as far as the aic fixup
is concerned, both IPs are identical.
> - reg: should encode the memory region of the RTT controller
> - interrupts: rtt alarm/event interrupt
> - clocks: should contain the 32 KHz slow clk that will drive the RTT block.
> --
> 2.7.4
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: mark.rutland@arm.com, a.zummo@towertech.it, jason@lakedaemon.net,
devicetree@vger.kernel.org, maz@kernel.org,
linux-kernel@vger.kernel.org, ludovic.desroches@microchip.com,
robh+dt@kernel.org, tglx@linutronix.de,
linux-arm-kernel@lists.infradead.org, linux-rtc@vger.kernel.org
Subject: Re: [PATCH 5/5] rtc: at91sam9: add microchip,sam9x60-rtt
Date: Fri, 10 Apr 2020 19:41:13 +0200 [thread overview]
Message-ID: <20200410174113.GZ3628@piout.net> (raw)
In-Reply-To: <1586536019-12348-6-git-send-email-claudiu.beznea@microchip.com>
Hi,
This patch must come first. Also, the correct prefix is
dt-bindings: rtc:
On 10/04/2020 19:26:59+0300, Claudiu Beznea wrote:
> Add microchip,sam9x60-rtt to compatible list.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
> Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
> index 6ae79d1843f3..b2f913ff6c69 100644
> --- a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
> +++ b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
> @@ -1,7 +1,7 @@
> Atmel AT91SAM9260 Real Time Timer
>
> Required properties:
> -- compatible: should be: "atmel,at91sam9260-rtt"
> +- compatible: should be: "atmel,at91sam9260-rtt" or "microchip,sam9x60-rtt"
If you had a fallback on atmel,at91sam9260-rtt, this would make merging
this series easier as this removes the need for 1/5 and 2/5.
I think 2/5 may be useful in the future but as far as the aic fixup
is concerned, both IPs are identical.
> - reg: should encode the memory region of the RTT controller
> - interrupts: rtt alarm/event interrupt
> - clocks: should contain the 32 KHz slow clk that will drive the RTT block.
> --
> 2.7.4
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-04-10 17:41 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-10 16:26 [PATCH 0/5] add RTT support for SAM9X60 Claudiu Beznea
2020-04-10 16:26 ` Claudiu Beznea
2020-04-10 16:26 ` [PATCH 1/5] irqchip/atmel-aic5: add support for sam9x60 rtt fixup Claudiu Beznea
2020-04-10 16:26 ` Claudiu Beznea
2020-04-10 16:26 ` [PATCH 2/5] rtc: at91sam9: enable driver for sam9x60 Claudiu Beznea
2020-04-10 16:26 ` Claudiu Beznea
2020-04-10 16:26 ` [PATCH 3/5] ARM: dts: sam9x60ek: enable gpbr Claudiu Beznea
2020-04-10 16:26 ` Claudiu Beznea
2020-04-10 16:26 ` [PATCH 4/5] ARM: dts: sam9x60: add rtt Claudiu Beznea
2020-04-10 16:26 ` Claudiu Beznea
2020-04-10 22:26 ` Alexandre Belloni
2020-04-10 22:26 ` Alexandre Belloni
2020-04-13 8:51 ` Claudiu.Beznea
2020-04-13 8:51 ` Claudiu.Beznea
2020-04-13 10:46 ` Alexandre Belloni
2020-04-13 10:46 ` Alexandre Belloni
2020-04-14 8:42 ` Claudiu.Beznea
2020-04-14 8:42 ` Claudiu.Beznea
2020-04-14 11:16 ` Alexandre Belloni
2020-04-14 11:16 ` Alexandre Belloni
2020-04-14 12:13 ` Claudiu.Beznea
2020-04-14 12:13 ` Claudiu.Beznea
2020-04-14 12:47 ` Alexandre Belloni
2020-04-14 12:47 ` Alexandre Belloni
2020-04-14 13:05 ` Claudiu.Beznea
2020-04-14 13:05 ` Claudiu.Beznea
2020-04-14 13:12 ` Alexandre Belloni
2020-04-14 13:12 ` Alexandre Belloni
2020-04-14 13:59 ` Claudiu.Beznea
2020-04-14 13:59 ` Claudiu.Beznea
2020-04-10 16:26 ` [PATCH 5/5] rtc: at91sam9: add microchip,sam9x60-rtt Claudiu Beznea
2020-04-10 16:26 ` Claudiu Beznea
2020-04-10 17:41 ` Alexandre Belloni [this message]
2020-04-10 17:41 ` Alexandre Belloni
2020-04-13 8:50 ` Claudiu.Beznea
2020-04-13 8:50 ` Claudiu.Beznea
2020-04-13 10:41 ` Alexandre Belloni
2020-04-13 10:41 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200410174113.GZ3628@piout.net \
--to=alexandre.belloni@bootlin.com \
--cc=a.zummo@towertech.it \
--cc=claudiu.beznea@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=mark.rutland@arm.com \
--cc=maz@kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.