All of lore.kernel.org
 help / color / mirror / Atom feed
From: mani@kernel.org
To: robh+dt@kernel.org, mcoquelin.stm32@gmail.com, alexandre.torgue@st.com
Cc: devicetree@vger.kernel.org,
	Manivannan Sadhasivam <mani@kernel.org>,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 0/6] Add Stinger96 and IoT Box board support
Date: Mon, 20 Apr 2020 23:01:18 +0530	[thread overview]
Message-ID: <20200420173124.27416-1-mani@kernel.org> (raw)

From: Manivannan Sadhasivam <mani@kernel.org>

Hello,

This series adds Stinger96 and IoT Box board support. These boards are
based on STM32MP157A SoC, designed and manufactured by Shiratech solutions.

The Stinger96 is a base board (96Boards IoT Extended edition) while IoT Box
adds one mezzanine on top of it and sold as a gateway device.

This series depends on below patchsets already submitted and gone through
reviews:

[PATCH v3 0/3] Add Reset and Wakeup support for CCS811
[PATCH v3 0/2] Add CTS/RTS gpio support to STM32 UART

More information about these boards can be found in below links:

https://www.shiratech-solutions.com/products/stinger96/
https://www.shiratech-solutions.com/products/iot-box/

Thanks,
Mani

Manivannan Sadhasivam (6):
  dt-bindings: Add vendor prefix for Shiratech Solutions
  ARM: dts: Add missing pinctrl entries for STM32MP15
  dt-bindings: arm: stm32: Document Stinger96 compatible
  ARM: dts: stm32mp1: Add Stinger96 board support
  dt-bindings: arm: stm32: Document IoT Box compatible
  ARM: dts: stm32mp1: Add IoT Box board support

 .../devicetree/bindings/arm/stm32/stm32.yaml  |   2 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   2 +
 arch/arm/boot/dts/stm32mp15-pinctrl.dtsi      |  64 ++++
 arch/arm/boot/dts/stm32mp157a-iot-box.dts     |  92 +++++
 arch/arm/boot/dts/stm32mp157a-stinger96.dts   |  12 +
 arch/arm/boot/dts/stm32mp157a-stinger96.dtsi  | 342 ++++++++++++++++++
 7 files changed, 516 insertions(+)
 create mode 100644 arch/arm/boot/dts/stm32mp157a-iot-box.dts
 create mode 100644 arch/arm/boot/dts/stm32mp157a-stinger96.dts
 create mode 100644 arch/arm/boot/dts/stm32mp157a-stinger96.dtsi

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: mani@kernel.org
To: robh+dt@kernel.org, mcoquelin.stm32@gmail.com, alexandre.torgue@st.com
Cc: devicetree@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Manivannan Sadhasivam <mani@kernel.org>
Subject: [PATCH 0/6] Add Stinger96 and IoT Box board support
Date: Mon, 20 Apr 2020 23:01:18 +0530	[thread overview]
Message-ID: <20200420173124.27416-1-mani@kernel.org> (raw)

From: Manivannan Sadhasivam <mani@kernel.org>

Hello,

This series adds Stinger96 and IoT Box board support. These boards are
based on STM32MP157A SoC, designed and manufactured by Shiratech solutions.

The Stinger96 is a base board (96Boards IoT Extended edition) while IoT Box
adds one mezzanine on top of it and sold as a gateway device.

This series depends on below patchsets already submitted and gone through
reviews:

[PATCH v3 0/3] Add Reset and Wakeup support for CCS811
[PATCH v3 0/2] Add CTS/RTS gpio support to STM32 UART

More information about these boards can be found in below links:

https://www.shiratech-solutions.com/products/stinger96/
https://www.shiratech-solutions.com/products/iot-box/

Thanks,
Mani

Manivannan Sadhasivam (6):
  dt-bindings: Add vendor prefix for Shiratech Solutions
  ARM: dts: Add missing pinctrl entries for STM32MP15
  dt-bindings: arm: stm32: Document Stinger96 compatible
  ARM: dts: stm32mp1: Add Stinger96 board support
  dt-bindings: arm: stm32: Document IoT Box compatible
  ARM: dts: stm32mp1: Add IoT Box board support

 .../devicetree/bindings/arm/stm32/stm32.yaml  |   2 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   2 +
 arch/arm/boot/dts/stm32mp15-pinctrl.dtsi      |  64 ++++
 arch/arm/boot/dts/stm32mp157a-iot-box.dts     |  92 +++++
 arch/arm/boot/dts/stm32mp157a-stinger96.dts   |  12 +
 arch/arm/boot/dts/stm32mp157a-stinger96.dtsi  | 342 ++++++++++++++++++
 7 files changed, 516 insertions(+)
 create mode 100644 arch/arm/boot/dts/stm32mp157a-iot-box.dts
 create mode 100644 arch/arm/boot/dts/stm32mp157a-stinger96.dts
 create mode 100644 arch/arm/boot/dts/stm32mp157a-stinger96.dtsi

-- 
2.17.1


             reply	other threads:[~2020-04-20 17:31 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-20 17:31 mani [this message]
2020-04-20 17:31 ` [PATCH 0/6] Add Stinger96 and IoT Box board support mani
2020-04-20 17:31 ` [PATCH 1/6] dt-bindings: Add vendor prefix for Shiratech Solutions mani
2020-04-20 17:31   ` mani
2020-04-20 17:31 ` [PATCH 2/6] ARM: dts: Add missing pinctrl entries for STM32MP15 mani
2020-04-20 17:31   ` mani
2020-04-21 11:16   ` Alexandre Torgue
2020-04-21 11:16     ` Alexandre Torgue
2020-04-20 17:31 ` [PATCH 3/6] dt-bindings: arm: stm32: Document Stinger96 compatible mani
2020-04-20 17:31   ` mani
2020-04-20 17:31 ` [PATCH 4/6] ARM: dts: stm32mp1: Add Stinger96 board support mani
2020-04-20 17:31   ` mani
2020-04-20 17:31 ` [PATCH 5/6] dt-bindings: arm: stm32: Document IoT Box compatible mani
2020-04-20 17:31   ` mani
2020-04-20 17:31 ` [PATCH 6/6] ARM: dts: stm32mp1: Add IoT Box board support mani
2020-04-20 17:31   ` mani
2020-04-29  8:02   ` Alexandre Torgue
2020-04-29  8:02     ` Alexandre Torgue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200420173124.27416-1-mani@kernel.org \
    --to=mani@kernel.org \
    --cc=alexandre.torgue@st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.