From: Eddie James <eajames@linux.ibm.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v10 5/7] ARM: dts: Aspeed: AST2600: Add XDMA PCI-E root control reset
Date: Mon, 20 Apr 2020 15:26:09 -0500 [thread overview]
Message-ID: <20200420202611.17776-6-eajames@linux.ibm.com> (raw)
In-Reply-To: <20200420202611.17776-1-eajames@linux.ibm.com>
The AST2600 XDMA engine requires the PCI-E root control reset be cleared
as well, so add a phandle to that syscon reset.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 1ffc15177b79..19f3287b7320 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -342,7 +342,8 @@ xdma: xdma at 1e6e7000 {
compatible = "aspeed,ast2600-xdma";
reg = <0x1e6e7000 0x100>;
clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
- resets = <&syscon ASPEED_RESET_DEV_XDMA>;
+ resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>;
+ reset-names = "device", "root-complex";
interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<&scu_ic0 2>;
pcie-device = "bmc";
--
2.24.0
WARNING: multiple messages have this Message-ID (diff)
From: Eddie James <eajames@linux.ibm.com>
To: linux-aspeed@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
robh+dt@kernel.org, joel@jms.id.au, andrew@aj.id.au,
eajames@linux.ibm.com
Subject: [PATCH v10 5/7] ARM: dts: Aspeed: AST2600: Add XDMA PCI-E root control reset
Date: Mon, 20 Apr 2020 15:26:09 -0500 [thread overview]
Message-ID: <20200420202611.17776-6-eajames@linux.ibm.com> (raw)
In-Reply-To: <20200420202611.17776-1-eajames@linux.ibm.com>
The AST2600 XDMA engine requires the PCI-E root control reset be cleared
as well, so add a phandle to that syscon reset.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 1ffc15177b79..19f3287b7320 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -342,7 +342,8 @@ xdma: xdma@1e6e7000 {
compatible = "aspeed,ast2600-xdma";
reg = <0x1e6e7000 0x100>;
clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
- resets = <&syscon ASPEED_RESET_DEV_XDMA>;
+ resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>;
+ reset-names = "device", "root-complex";
interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<&scu_ic0 2>;
pcie-device = "bmc";
--
2.24.0
next prev parent reply other threads:[~2020-04-20 20:26 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-20 20:26 [PATCH v10 0/7] soc: aspeed: Add XDMA engine driver Eddie James
2020-04-20 20:26 ` Eddie James
2020-04-20 20:26 ` [PATCH v10 1/7] dt-bindings: soc: Add Aspeed XDMA Engine Eddie James
2020-04-20 20:26 ` Eddie James
2020-04-22 20:13 ` Rob Herring
2020-04-22 20:13 ` Rob Herring
2020-04-20 20:26 ` [PATCH v10 2/7] soc: aspeed: Add XDMA Engine Driver Eddie James
2020-04-20 20:26 ` Eddie James
2020-04-20 20:26 ` [PATCH v10 3/7] soc: aspeed: xdma: Add user interface Eddie James
2020-04-20 20:26 ` Eddie James
2020-04-20 20:26 ` [PATCH v10 4/7] soc: aspeed: xdma: Add reset ioctl Eddie James
2020-04-20 20:26 ` Eddie James
2020-04-20 20:26 ` Eddie James [this message]
2020-04-20 20:26 ` [PATCH v10 5/7] ARM: dts: Aspeed: AST2600: Add XDMA PCI-E root control reset Eddie James
2020-04-20 20:26 ` [PATCH v10 6/7] ARM: dts: Aspeed: AST2500: Add missing SCU interrupt controller include Eddie James
2020-04-20 20:26 ` Eddie James
2020-04-20 20:26 ` [PATCH v10 7/7] ARM: dts: Aspeed: AST2600: " Eddie James
2020-04-20 20:26 ` Eddie James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200420202611.17776-6-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.