Re: [PATCH v3 2/2] dt-bindings: Document the Synopsys ARC HDMI TX bindings

[Rob Herring <robh@kernel.org>]

On Wed, Apr 15, 2020 at 02:29:29AM +0300, Eugeniy Paltsev wrote:
> This patch adds documentation of device tree bindings for the Synopsys
> HDMI 2.0 TX encoder driver for ARC SoCs.

You're going to need to base this on top of Laurent's conversion of 
dw_hdmi.txt to schema.

> 
> Acked-by: Sam Ravnborg <sam@ravnborg.org>
> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> ---
>  .../display/bridge/snps,arc-dw-hdmi.yaml      | 136 ++++++++++++++++++
>  1 file changed, 136 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.yaml
> new file mode 100644
> index 000000000000..9b2fdfecd5b3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.yaml
> @@ -0,0 +1,136 @@
> +# SPDX-License-Identifier: GPL-2.0

Dual license new bindings please:

(GPL-2.0-only OR BSD-2-Clause)

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/snps,arc-dw-hdmi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Synopsys DesignWare HDMI 2.0 TX encoder driver

Bindings are for h/w blocks, not drivers.

> +
> +maintainers:
> +  - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> +
> +description: |
> +  The HDMI transmitter is a Synopsys DesignWare HDMI 2.0 TX controller IP
> +  with a companion of Synopsys DesignWare HDMI 2.0 TX PHY IP.

Sounds like 2 blocks?

> +
> +  These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
> +  Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt
> +  with the following device-specific properties.
> +
> +properties:
> +  compatible:
> +    const: snps,arc-dw-hdmi-hsdk
> +
> +  reg:
> +    maxItems: 1
> +    description: |
> +      Memory mapped base address and length of the DWC HDMI TX registers.

Can drop.

> +
> +  clocks:
> +    items:
> +      - description: The bus clock for AHB / APB
> +      - description: The internal register configuration clock
> +
> +  clock-names:
> +    items:
> +      - const: iahb
> +      - const: isfr
> +
> +  interrupts:
> +    maxItems: 1
> +    description: Reference to the DWC HDMI TX interrupt

Can drop.

> +
> +  reg-io-width:
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - enum: [1, 4]
> +        description: |
> +          Width of the registers specified by the reg property. The
> +          value is expressed in bytes and must be equal to 1 or 4 if specified.
> +          The register width defaults to 1 if the property is not present.

default: 1

The description is pretty much a plain text version of the constraints, 
so all but the first sentence can be dropped.

> +
> +  ports:
> +    type: object
> +    description: |
> +      A ports node with endpoint definitions as defined in
> +      Documentation/devicetree/bindings/media/video-interfaces.txt

Can drop. That's all 'ports'.

> +
> +    properties:
> +      "#address-cells":
> +        const: 1
> +
> +      "#size-cells":
> +        const: 0
> +
> +      port@0:
> +        type: object
> +        description: |
> +          Video input endpoints of the controller.
> +          Usually it is associated with ARC PGU.
> +
> +      port@1:
> +        type: object
> +        description: |
> +          Output endpoints of the controller. HDMI connector.
> +
> +    required:
> +      - "#address-cells"
> +      - "#size-cells"
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    hdmi@10000 {
> +        compatible = "snps,arc-dw-hdmi-hsdk";
> +        reg = <0x10000 0x10000>;
> +        reg-io-width = <4>;
> +        interrupts = <14>;
> +        clocks = <&apbclk>, <&hdmi_pix_clk>;
> +        clock-names = "iahb", "isfr";
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port@0 {
> +                reg = <0>;
> +                hdmi_enc_input: endpoint {
> +                    remote-endpoint = <&pgu_output>;
> +                };
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +                hdmi_enc_out: endpoint {
> +                    remote-endpoint = <&hdmi_con>;
> +                };
> +            };
> +        };
> +    };
> +
> +    hdmi-out {
> +        port {
> +            hdmi_con: endpoint {
> +                remote-endpoint = <&hdmi_enc_out>;
> +            };
> +        };
> +    };
> +
> +    pgu {
> +        port_o: port {
> +            pgu_output: endpoint {
> +                remote-endpoint = <&hdmi_enc_input>;
> +            };
> +        };
> +    };
> -- 
> 2.21.1
> 

_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc