[PATCH net-next v5 0/4] add TJA1102 support

[PATCH net-next v5 0/4] add TJA1102 support

[Oleksij Rempel]

changes v5:
- rename __of_mdiobus_register_phy() to of_mdiobus_phy_device_register()

changes v4:
- remove unused phy_id variable

changes v3:
- export part of of_mdiobus_register_phy() and reuse it in tja11xx
  driver
- coding style fixes

changes v2:
- use .match_phy_device
- add irq support
- add add delayed registration for PHY1

Oleksij Rempel (4):
  dt-bindings: net: phy: Add support for NXP TJA11xx
  net: phy: tja11xx: add initial TJA1102 support
  net: mdio: of: export part of of_mdiobus_register_phy()
  net: phy: tja11xx: add delayed registration of TJA1102 PHY1

 .../devicetree/bindings/net/nxp,tja11xx.yaml  |  61 ++++++
 drivers/net/phy/nxp-tja11xx.c                 | 201 +++++++++++++++++-
 drivers/of/of_mdio.c                          |  73 ++++---
 include/linux/of_mdio.h                       |  11 +-
 4 files changed, 308 insertions(+), 38 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/nxp,tja11xx.yaml

-- 
2.26.1

[PATCH net-next v5 1/4] dt-bindings: net: phy: Add support for NXP TJA11xx

[Oleksij Rempel]

Document the NXP TJA11xx PHY bindings.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 .../devicetree/bindings/net/nxp,tja11xx.yaml  | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/nxp,tja11xx.yaml

diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
new file mode 100644
index 0000000000000..42be0255512b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nxp,tja11xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP TJA11xx PHY
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Heiner Kallweit <hkallweit1@gmail.com>
+
+description:
+  Bindings for NXP TJA11xx automotive PHYs
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+patternProperties:
+  "^ethernet-phy@[0-9a-f]+$":
+    type: object
+    description: |
+      Some packages have multiple PHYs. Secondary PHY should be defines as
+      subnode of the first (parent) PHY.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 31
+        description:
+          The ID number for the child PHY. Should be +1 of parent PHY.
+
+    required:
+      - reg
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tja1101_phy0: ethernet-phy@4 {
+            reg = <0x4>;
+        };
+    };
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tja1102_phy0: ethernet-phy@4 {
+            reg = <0x4>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            tja1102_phy1: ethernet-phy@5 {
+                reg = <0x5>;
+            };
+        };
+    };
-- 
2.26.1

Re: [PATCH net-next v5 1/4] dt-bindings: net: phy: Add support for NXP TJA11xx

[Andrew Lunn]

On Wed, Apr 22, 2020 at 11:24:53AM +0200, Oleksij Rempel wrote:
> Document the NXP TJA11xx PHY bindings.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH net-next v5 1/4] dt-bindings: net: phy: Add support for NXP TJA11xx

[Florian Fainelli]

On 4/22/2020 2:24 AM, Oleksij Rempel wrote:
> Document the NXP TJA11xx PHY bindings.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
>   .../devicetree/bindings/net/nxp,tja11xx.yaml  | 61 +++++++++++++++++++
>   1 file changed, 61 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
> new file mode 100644
> index 0000000000000..42be0255512b3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
> @@ -0,0 +1,61 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/nxp,tja11xx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP TJA11xx PHY
> +
> +maintainers:
> +  - Andrew Lunn <andrew@lunn.ch>
> +  - Florian Fainelli <f.fainelli@gmail.com>
> +  - Heiner Kallweit <hkallweit1@gmail.com>

I would have expected to have you listed as a maintainer of this 
binding, but fair enough.

> +
> +description:
> +  Bindings for NXP TJA11xx automotive PHYs
> +
> +allOf:
> +  - $ref: ethernet-phy.yaml#
> +
> +patternProperties:
> +  "^ethernet-phy@[0-9a-f]+$":
> +    type: object
> +    description: |
> +      Some packages have multiple PHYs. Secondary PHY should be defines as

should be defined as a subnode.
-- 
Florian

[PATCH net-next v5 2/4] net: phy: tja11xx: add initial TJA1102 support

[Oleksij Rempel]

TJA1102 is an dual T1 PHY chip. Both PHYs are separately addressable.
Both PHYs are similar but have different amount of functionality. For
example PHY 1 has no PHY ID and no health monitor.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/phy/nxp-tja11xx.c | 91 +++++++++++++++++++++++++++++++++++
 1 file changed, 91 insertions(+)

diff --git a/drivers/net/phy/nxp-tja11xx.c b/drivers/net/phy/nxp-tja11xx.c
index 47caae770ffc8..971286f5e5b0b 100644
--- a/drivers/net/phy/nxp-tja11xx.c
+++ b/drivers/net/phy/nxp-tja11xx.c
@@ -15,6 +15,7 @@
 #define PHY_ID_MASK			0xfffffff0
 #define PHY_ID_TJA1100			0x0180dc40
 #define PHY_ID_TJA1101			0x0180dd00
+#define PHY_ID_TJA1102			0x0180dc80
 
 #define MII_ECTRL			17
 #define MII_ECTRL_LINK_CONTROL		BIT(15)
@@ -40,6 +41,10 @@
 #define MII_INTSRC_TEMP_ERR		BIT(1)
 #define MII_INTSRC_UV_ERR		BIT(3)
 
+#define MII_INTEN			22
+#define MII_INTEN_LINK_FAIL		BIT(10)
+#define MII_INTEN_LINK_UP		BIT(9)
+
 #define MII_COMMSTAT			23
 #define MII_COMMSTAT_LINK_UP		BIT(15)
 
@@ -180,6 +185,7 @@ static int tja11xx_config_init(struct phy_device *phydev)
 			return ret;
 		break;
 	case PHY_ID_TJA1101:
+	case PHY_ID_TJA1102:
 		ret = phy_set_bits(phydev, MII_COMMCFG, MII_COMMCFG_AUTO_OP);
 		if (ret)
 			return ret;
@@ -344,6 +350,55 @@ static int tja11xx_probe(struct phy_device *phydev)
 	return PTR_ERR_OR_ZERO(priv->hwmon_dev);
 }
 
+static int tja1102_match_phy_device(struct phy_device *phydev, bool port0)
+{
+	int ret;
+
+	if ((phydev->phy_id & PHY_ID_MASK) != PHY_ID_TJA1102)
+		return 0;
+
+	ret = phy_read(phydev, MII_PHYSID2);
+	if (ret < 0)
+		return ret;
+
+	/* TJA1102 Port 1 has phyid 0 and doesn't support temperature
+	 * and undervoltage alarms.
+	 */
+	if (port0)
+		return ret ? 1 : 0;
+
+	return !ret;
+}
+
+static int tja1102_p0_match_phy_device(struct phy_device *phydev)
+{
+	return tja1102_match_phy_device(phydev, true);
+}
+
+static int tja1102_p1_match_phy_device(struct phy_device *phydev)
+{
+	return tja1102_match_phy_device(phydev, false);
+}
+
+static int tja11xx_ack_interrupt(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_read(phydev, MII_INTSRC);
+
+	return (ret < 0) ? ret : 0;
+}
+
+static int tja11xx_config_intr(struct phy_device *phydev)
+{
+	int value = 0;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		value = MII_INTEN_LINK_FAIL | MII_INTEN_LINK_UP;
+
+	return phy_write(phydev, MII_INTEN, value);
+}
+
 static struct phy_driver tja11xx_driver[] = {
 	{
 		PHY_ID_MATCH_MODEL(PHY_ID_TJA1100),
@@ -375,6 +430,41 @@ static struct phy_driver tja11xx_driver[] = {
 		.get_sset_count = tja11xx_get_sset_count,
 		.get_strings	= tja11xx_get_strings,
 		.get_stats	= tja11xx_get_stats,
+	}, {
+		.name		= "NXP TJA1102 Port 0",
+		.features       = PHY_BASIC_T1_FEATURES,
+		.probe		= tja11xx_probe,
+		.soft_reset	= tja11xx_soft_reset,
+		.config_init	= tja11xx_config_init,
+		.read_status	= tja11xx_read_status,
+		.match_phy_device = tja1102_p0_match_phy_device,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.set_loopback   = genphy_loopback,
+		/* Statistics */
+		.get_sset_count = tja11xx_get_sset_count,
+		.get_strings	= tja11xx_get_strings,
+		.get_stats	= tja11xx_get_stats,
+		.ack_interrupt	= tja11xx_ack_interrupt,
+		.config_intr	= tja11xx_config_intr,
+
+	}, {
+		.name		= "NXP TJA1102 Port 1",
+		.features       = PHY_BASIC_T1_FEATURES,
+		/* currently no probe for Port 1 is need */
+		.soft_reset	= tja11xx_soft_reset,
+		.config_init	= tja11xx_config_init,
+		.read_status	= tja11xx_read_status,
+		.match_phy_device = tja1102_p1_match_phy_device,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.set_loopback   = genphy_loopback,
+		/* Statistics */
+		.get_sset_count = tja11xx_get_sset_count,
+		.get_strings	= tja11xx_get_strings,
+		.get_stats	= tja11xx_get_stats,
+		.ack_interrupt	= tja11xx_ack_interrupt,
+		.config_intr	= tja11xx_config_intr,
 	}
 };
 
@@ -383,6 +473,7 @@ module_phy_driver(tja11xx_driver);
 static struct mdio_device_id __maybe_unused tja11xx_tbl[] = {
 	{ PHY_ID_MATCH_MODEL(PHY_ID_TJA1100) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_TJA1101) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_TJA1102) },
 	{ }
 };
 
-- 
2.26.1

Re: [PATCH net-next v5 2/4] net: phy: tja11xx: add initial TJA1102 support

[Andrew Lunn]

On Wed, Apr 22, 2020 at 11:24:54AM +0200, Oleksij Rempel wrote:
> TJA1102 is an dual T1 PHY chip. Both PHYs are separately addressable.
> Both PHYs are similar but have different amount of functionality. For
> example PHY 1 has no PHY ID and no health monitor.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH net-next v5 2/4] net: phy: tja11xx: add initial TJA1102 support

[Florian Fainelli]

On 4/22/2020 2:24 AM, Oleksij Rempel wrote:
> TJA1102 is an dual T1 PHY chip. Both PHYs are separately addressable.
> Both PHYs are similar but have different amount of functionality. For
> example PHY 1 has no PHY ID and no health monitor.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

[PATCH net-next v5 3/4] net: mdio: of: export part of of_mdiobus_register_phy()

[Oleksij Rempel]

This function will be needed in tja11xx driver for secondary PHY
support.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/of/of_mdio.c    | 73 ++++++++++++++++++++++++-----------------
 include/linux/of_mdio.h | 11 ++++++-
 2 files changed, 52 insertions(+), 32 deletions(-)

diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 9f982c0627a0d..a04afe79529ca 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -60,39 +60,15 @@ static struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)
 	return register_mii_timestamper(arg.np, arg.args[0]);
 }
 
-static int of_mdiobus_register_phy(struct mii_bus *mdio,
-				    struct device_node *child, u32 addr)
+int of_mdiobus_phy_device_register(struct mii_bus *mdio, struct phy_device *phy,
+			      struct device_node *child, u32 addr)
 {
-	struct mii_timestamper *mii_ts;
-	struct phy_device *phy;
-	bool is_c45;
 	int rc;
-	u32 phy_id;
-
-	mii_ts = of_find_mii_timestamper(child);
-	if (IS_ERR(mii_ts))
-		return PTR_ERR(mii_ts);
-
-	is_c45 = of_device_is_compatible(child,
-					 "ethernet-phy-ieee802.3-c45");
-
-	if (!is_c45 && !of_get_phy_id(child, &phy_id))
-		phy = phy_device_create(mdio, addr, phy_id, 0, NULL);
-	else
-		phy = get_phy_device(mdio, addr, is_c45);
-	if (IS_ERR(phy)) {
-		if (mii_ts)
-			unregister_mii_timestamper(mii_ts);
-		return PTR_ERR(phy);
-	}
 
 	rc = of_irq_get(child, 0);
-	if (rc == -EPROBE_DEFER) {
-		if (mii_ts)
-			unregister_mii_timestamper(mii_ts);
-		phy_device_free(phy);
+	if (rc == -EPROBE_DEFER)
 		return rc;
-	}
+
 	if (rc > 0) {
 		phy->irq = rc;
 		mdio->irq[addr] = rc;
@@ -117,11 +93,48 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio,
 	/* All data is now stored in the phy struct;
 	 * register it */
 	rc = phy_device_register(phy);
+	if (rc) {
+		of_node_put(child);
+		return rc;
+	}
+
+	dev_dbg(&mdio->dev, "registered phy %pOFn at address %i\n",
+		child, addr);
+	return 0;
+}
+EXPORT_SYMBOL(of_mdiobus_phy_device_register);
+
+static int of_mdiobus_register_phy(struct mii_bus *mdio,
+				    struct device_node *child, u32 addr)
+{
+	struct mii_timestamper *mii_ts;
+	struct phy_device *phy;
+	bool is_c45;
+	int rc;
+	u32 phy_id;
+
+	mii_ts = of_find_mii_timestamper(child);
+	if (IS_ERR(mii_ts))
+		return PTR_ERR(mii_ts);
+
+	is_c45 = of_device_is_compatible(child,
+					 "ethernet-phy-ieee802.3-c45");
+
+	if (!is_c45 && !of_get_phy_id(child, &phy_id))
+		phy = phy_device_create(mdio, addr, phy_id, 0, NULL);
+	else
+		phy = get_phy_device(mdio, addr, is_c45);
+	if (IS_ERR(phy)) {
+		if (mii_ts)
+			unregister_mii_timestamper(mii_ts);
+		return PTR_ERR(phy);
+	}
+
+	rc = of_mdiobus_phy_device_register(mdio, phy, child, addr);
 	if (rc) {
 		if (mii_ts)
 			unregister_mii_timestamper(mii_ts);
 		phy_device_free(phy);
-		of_node_put(child);
 		return rc;
 	}
 
@@ -132,8 +145,6 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio,
 	if (mii_ts)
 		phy->mii_ts = mii_ts;
 
-	dev_dbg(&mdio->dev, "registered phy %pOFn at address %i\n",
-		child, addr);
 	return 0;
 }
 
diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h
index 491a2b7e77c1e..0f61a4ac6bcfb 100644
--- a/include/linux/of_mdio.h
+++ b/include/linux/of_mdio.h
@@ -30,7 +30,9 @@ extern struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np);
 extern int of_phy_register_fixed_link(struct device_node *np);
 extern void of_phy_deregister_fixed_link(struct device_node *np);
 extern bool of_phy_is_fixed_link(struct device_node *np);
-
+extern int of_mdiobus_phy_device_register(struct mii_bus *mdio,
+				     struct phy_device *phy,
+				     struct device_node *child, u32 addr);
 
 static inline int of_mdio_parse_addr(struct device *dev,
 				     const struct device_node *np)
@@ -118,6 +120,13 @@ static inline bool of_phy_is_fixed_link(struct device_node *np)
 {
 	return false;
 }
+
+static inline int of_mdiobus_phy_device_register(struct mii_bus *mdio,
+					    struct phy_device *phy,
+					    struct device_node *child, u32 addr)
+{
+	return -ENOSYS;
+}
 #endif
 
 
-- 
2.26.1

Re: [PATCH net-next v5 3/4] net: mdio: of: export part of of_mdiobus_register_phy()

[Andrew Lunn]

On Wed, Apr 22, 2020 at 11:24:55AM +0200, Oleksij Rempel wrote:
> This function will be needed in tja11xx driver for secondary PHY
> support.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH net-next v5 3/4] net: mdio: of: export part of of_mdiobus_register_phy()

[Florian Fainelli]

On 4/22/2020 2:24 AM, Oleksij Rempel wrote:
> This function will be needed in tja11xx driver for secondary PHY
> support.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

[PATCH net-next v5 4/4] net: phy: tja11xx: add delayed registration of TJA1102 PHY1

[Oleksij Rempel]

TJA1102 is a dual PHY package with PHY0 having proper PHYID and PHY1
having no ID. On one hand it is possible to for PHY detection by
compatible, on other hand we should be able to reset complete chip
before PHY1 configured it, and we need to define dependencies for proper
power management.

We can solve it by defining PHY1 as child of PHY0:
	tja1102_phy0: ethernet-phy@4 {
		reg = <0x4>;

		interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;

		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
		reset-assert-us = <20>;
		reset-deassert-us = <2000>;

		tja1102_phy1: ethernet-phy@5 {
			reg = <0x5>;

			interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
		};
	};

The PHY1 should be a subnode of PHY0 and registered only after PHY0 was
completely reset and initialized.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/phy/nxp-tja11xx.c | 112 +++++++++++++++++++++++++++++++---
 1 file changed, 105 insertions(+), 7 deletions(-)

diff --git a/drivers/net/phy/nxp-tja11xx.c b/drivers/net/phy/nxp-tja11xx.c
index 971286f5e5b0b..cc766b2d4136e 100644
--- a/drivers/net/phy/nxp-tja11xx.c
+++ b/drivers/net/phy/nxp-tja11xx.c
@@ -6,11 +6,14 @@
 #include <linux/delay.h>
 #include <linux/ethtool.h>
 #include <linux/kernel.h>
+#include <linux/mdio.h>
 #include <linux/mii.h>
 #include <linux/module.h>
 #include <linux/phy.h>
 #include <linux/hwmon.h>
 #include <linux/bitfield.h>
+#include <linux/of_mdio.h>
+#include <linux/of_irq.h>
 
 #define PHY_ID_MASK			0xfffffff0
 #define PHY_ID_TJA1100			0x0180dc40
@@ -57,6 +60,8 @@
 struct tja11xx_priv {
 	char		*hwmon_name;
 	struct device	*hwmon_dev;
+	struct phy_device *phydev;
+	struct work_struct phy_register_work;
 };
 
 struct tja11xx_phy_stats {
@@ -323,16 +328,12 @@ static const struct hwmon_chip_info tja11xx_hwmon_chip_info = {
 	.info		= tja11xx_hwmon_info,
 };
 
-static int tja11xx_probe(struct phy_device *phydev)
+static int tja11xx_hwmon_register(struct phy_device *phydev,
+				  struct tja11xx_priv *priv)
 {
 	struct device *dev = &phydev->mdio.dev;
-	struct tja11xx_priv *priv;
 	int i;
 
-	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
 	priv->hwmon_name = devm_kstrdup(dev, dev_name(dev), GFP_KERNEL);
 	if (!priv->hwmon_name)
 		return -ENOMEM;
@@ -350,6 +351,103 @@ static int tja11xx_probe(struct phy_device *phydev)
 	return PTR_ERR_OR_ZERO(priv->hwmon_dev);
 }
 
+static int tja11xx_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct tja11xx_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->phydev = phydev;
+
+	return tja11xx_hwmon_register(phydev, priv);
+}
+
+static void tja1102_p1_register(struct work_struct *work)
+{
+	struct tja11xx_priv *priv = container_of(work, struct tja11xx_priv,
+						 phy_register_work);
+	struct phy_device *phydev_phy0 = priv->phydev;
+	struct mii_bus *bus = phydev_phy0->mdio.bus;
+	struct device *dev = &phydev_phy0->mdio.dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *child;
+	int ret;
+
+	for_each_available_child_of_node(np, child) {
+		struct phy_device *phy;
+		int addr;
+
+		addr = of_mdio_parse_addr(dev, child);
+		if (addr < 0) {
+			dev_err(dev, "Can't parse addr\n");
+			continue;
+		} else if (addr != phydev_phy0->mdio.addr + 1) {
+			/* Currently we care only about double PHY chip TJA1102.
+			 * If some day NXP will decide to bring chips with more
+			 * PHYs, this logic should be reworked.
+			 */
+			dev_err(dev, "Unexpected address. Should be: %i\n",
+				phydev_phy0->mdio.addr + 1);
+			continue;
+		}
+
+		if (mdiobus_is_registered_device(bus, addr)) {
+			dev_err(dev, "device is already registered\n");
+			continue;
+		}
+
+		/* Real PHY ID of Port 1 is 0 */
+		phy = phy_device_create(bus, addr, PHY_ID_TJA1102, false, NULL);
+		if (IS_ERR(phy)) {
+			dev_err(dev, "Can't create PHY device for Port 1: %i\n",
+				addr);
+			continue;
+		}
+
+		/* Overwrite parent device. phy_device_create() set parent to
+		 * the mii_bus->dev, which is not correct in case.
+		 */
+		phy->mdio.dev.parent = dev;
+
+		ret = of_mdiobus_phy_device_register(bus, phy, child, addr);
+		if (ret) {
+			/* All resources needed for Port 1 should be already
+			 * available for Port 0. Both ports use the same
+			 * interrupt line, so -EPROBE_DEFER would make no sense
+			 * here.
+			 */
+			dev_err(dev, "Can't register Port 1. Unexpected error: %i\n",
+				ret);
+			phy_device_free(phy);
+		}
+	}
+}
+
+static int tja1102_p0_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct tja11xx_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->phydev = phydev;
+	INIT_WORK(&priv->phy_register_work, tja1102_p1_register);
+
+	ret = tja11xx_hwmon_register(phydev, priv);
+	if (ret)
+		return ret;
+
+	schedule_work(&priv->phy_register_work);
+
+	return 0;
+}
+
 static int tja1102_match_phy_device(struct phy_device *phydev, bool port0)
 {
 	int ret;
@@ -433,7 +531,7 @@ static struct phy_driver tja11xx_driver[] = {
 	}, {
 		.name		= "NXP TJA1102 Port 0",
 		.features       = PHY_BASIC_T1_FEATURES,
-		.probe		= tja11xx_probe,
+		.probe		= tja1102_p0_probe,
 		.soft_reset	= tja11xx_soft_reset,
 		.config_init	= tja11xx_config_init,
 		.read_status	= tja11xx_read_status,
-- 
2.26.1

Re: [PATCH net-next v5 4/4] net: phy: tja11xx: add delayed registration of TJA1102 PHY1

[Andrew Lunn]

On Wed, Apr 22, 2020 at 11:24:56AM +0200, Oleksij Rempel wrote:
> TJA1102 is a dual PHY package with PHY0 having proper PHYID and PHY1
> having no ID. On one hand it is possible to for PHY detection by
> compatible, on other hand we should be able to reset complete chip
> before PHY1 configured it, and we need to define dependencies for proper
> power management.
> 
> We can solve it by defining PHY1 as child of PHY0:
> 	tja1102_phy0: ethernet-phy@4 {
> 		reg = <0x4>;
> 
> 		interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
> 
> 		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
> 		reset-assert-us = <20>;
> 		reset-deassert-us = <2000>;
> 
> 		tja1102_phy1: ethernet-phy@5 {
> 			reg = <0x5>;
> 
> 			interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
> 		};
> 	};
> 
> The PHY1 should be a subnode of PHY0 and registered only after PHY0 was
> completely reset and initialized.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH net-next v5 4/4] net: phy: tja11xx: add delayed registration of TJA1102 PHY1

[Florian Fainelli]

On 4/22/2020 2:24 AM, Oleksij Rempel wrote:
> TJA1102 is a dual PHY package with PHY0 having proper PHYID and PHY1
> having no ID. On one hand it is possible to for PHY detection by
> compatible, on other hand we should be able to reset complete chip
> before PHY1 configured it, and we need to define dependencies for proper
> power management.
> 
> We can solve it by defining PHY1 as child of PHY0:
> 	tja1102_phy0: ethernet-phy@4 {
> 		reg = <0x4>;
> 
> 		interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
> 
> 		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
> 		reset-assert-us = <20>;
> 		reset-deassert-us = <2000>;
> 
> 		tja1102_phy1: ethernet-phy@5 {
> 			reg = <0x5>;
> 
> 			interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
> 		};
> 	};
> 
> The PHY1 should be a subnode of PHY0 and registered only after PHY0 was
> completely reset and initialized.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

You did not expand too much on why you had to use a workqueue to 
register the second PHY instance?
-- 
Florian

Re: [PATCH net-next v5 0/4] add TJA1102 support

[David Miller]

From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: Wed, 22 Apr 2020 11:24:52 +0200

> changes v5:
> - rename __of_mdiobus_register_phy() to of_mdiobus_phy_device_register()
> 
> changes v4:
> - remove unused phy_id variable
> 
> changes v3:
> - export part of of_mdiobus_register_phy() and reuse it in tja11xx
>   driver
> - coding style fixes
> 
> changes v2:
> - use .match_phy_device
> - add irq support
> - add add delayed registration for PHY1

Series applied, thanks.