* [PATCH 3/4] kbuild: sync if_changed and friends with Linux 5.7-rc2
2020-04-30 5:13 [PATCH 1/4] kbuild: do not delete $@ explicitly on failure Masahiro Yamada
2020-04-30 5:13 ` [PATCH 2/4] kbuild: sync filechk rule with Linux 5.7-rc2 Masahiro Yamada
@ 2020-04-30 5:13 ` Masahiro Yamada
2020-04-30 5:13 ` [PATCH 4/4] kbuild: sync scripts/Kbuild.include " Masahiro Yamada
2020-05-04 7:00 ` [PATCH 1/4] kbuild: do not delete $@ explicitly on failure Sascha Hauer
3 siblings, 0 replies; 5+ messages in thread
From: Masahiro Yamada @ 2020-04-30 5:13 UTC (permalink / raw)
To: barebox; +Cc: Masahiro Yamada
Resync cmd, if_change, if_changed_dep, and if_changed_rule.
Clean up the users of if_changed_rule.
I deleted the modversions rule. It is dead code because barebox
does not define CONFIG_MODVERSIONS. It does not work without
scripts/genksyms/ anyway.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
Makefile | 14 ++-------
scripts/Kbuild.include | 47 +++++++++++++++---------------
scripts/Makefile.build | 66 +++++-------------------------------------
3 files changed, 34 insertions(+), 93 deletions(-)
diff --git a/Makefile b/Makefile
index 59e041fed..9485f5551 100644
--- a/Makefile
+++ b/Makefile
@@ -626,24 +626,18 @@ quiet_cmd_barebox_version = GEN .version
$(MAKE) $(build)=common
# Generate System.map
-quiet_cmd_sysmap = SYSMAP
- cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
+quiet_cmd_sysmap = SYSMAP System.map
+ cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap $@ System.map
# Link of barebox
# If CONFIG_KALLSYMS is set .version is already updated
# Generate System.map and verify that the content is consistent
# Use + in front of the barebox_version rule to silent warning with make -j2
-# First command is ':' to allow us to use + in front of the rule
define rule_barebox__
- :
$(if $(CONFIG_KALLSYMS),,+$(call cmd,barebox_version))
$(call cmd,barebox__)
-
$(Q)echo 'cmd_$@ := $(cmd_barebox__)' > $(@D)/.$(@F).cmd
-
- $(Q)$(if $($(quiet)cmd_sysmap), \
- echo ' $($(quiet)cmd_sysmap) System.map' &&) \
- $(cmd_sysmap) $@ System.map
+ $(call cmd,sysmap)
endef
ifdef CONFIG_KALLSYMS
@@ -684,10 +678,8 @@ endef
# Update barebox version before link
# Use + in front of this rule to silent warning about make -j1
-# First command is ':' to allow us to use + in front of this rule
cmd_ksym_ld = $(cmd_barebox__)
define rule_ksym_ld
- :
+$(call cmd,barebox_version)
$(call cmd,barebox__)
$(Q)echo 'cmd_$@ := $(cmd_barebox__)' > $(@D)/.$(@F).cmd
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index 983329e40..074d2db04 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -165,7 +165,7 @@ echo-cmd = $(if $($(quiet)cmd_$(1)),\
echo ' $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';)
# printing commands
-cmd = @$(echo-cmd) $(cmd_$(1))
+cmd = @set -e; $(echo-cmd) $(cmd_$(1))
# Add $(obj)/ for paths that are not absolute
objectify = $(foreach o,$(1),$(if $(filter /%,$(o)),$(o),$(obj)/$(o)))
@@ -176,15 +176,15 @@ objectify = $(foreach o,$(1),$(if $(filter /%,$(o)),$(o),$(obj)/$(o)))
# if_changed_dep - as if_changed, but uses fixdep to reveal dependencies
# including used config symbols
# if_changed_rule - as if_changed but execute rule instead
-# See Documentation/kbuild/makefiles.txt for more info
+# See Documentation/kbuild/makefiles.rst for more info
ifneq ($(KBUILD_NOCMDDEP),1)
-# Check if both arguments are the same including their order. Result is empty
+# Check if both commands are the same including their order. Result is empty
# string if equal. User may override this check using make KBUILD_NOCMDDEP=1
-arg-check = $(filter-out $(subst $(space),$(space_escape),$(strip $(cmd_$@))), \
+cmd-check = $(filter-out $(subst $(space),$(space_escape),$(strip $(cmd_$@))), \
$(subst $(space),$(space_escape),$(strip $(cmd_$1))))
else
-arg-check = $(if $(strip $(cmd_$@)),,1)
+cmd-check = $(if $(strip $(cmd_$@)),,1)
endif
# Replace >$< with >$$< to preserve $ when reloading the .cmd file
@@ -195,34 +195,33 @@ endif
# (needed for the shell)
make-cmd = $(call escsq,$(subst $(pound),$$(pound),$(subst $$,$$$$,$(cmd_$(1)))))
-# Find any prerequisites that is newer than target or that does not exist.
+# Find any prerequisites that are newer than target or that do not exist.
+# (This is not true for now; $? should contain any non-existent prerequisites,
+# but it does not work as expected when .SECONDARY is present. This seems a bug
+# of GNU Make.)
# PHONY targets skipped in both cases.
-any-prereq = $(filter-out $(PHONY),$?) $(filter-out $(PHONY) $(wildcard $^),$^)
+newer-prereqs = $(filter-out $(PHONY),$?)
# Execute command if command has changed or prerequisite(s) are updated.
-#
-if_changed = $(if $(strip $(any-prereq) $(arg-check)), \
- @set -e; \
- $(echo-cmd) $(cmd_$(1)); \
- printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
+if_changed = $(if $(newer-prereqs)$(cmd-check), \
+ $(cmd); \
+ printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd, @:)
# Execute the command and also postprocess generated .d dependencies file.
-if_changed_dep = $(if $(strip $(any-prereq) $(arg-check) ), \
- @set -e; \
- $(echo-cmd) $(cmd_$(1)); \
- scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).tmp;\
- rm -f $(depfile); \
- mv -f $(dot-target).tmp $(dot-target).cmd)
+if_changed_dep = $(if $(newer-prereqs)$(cmd-check),$(cmd_and_fixdep),@:)
+
+cmd_and_fixdep = \
+ $(cmd); \
+ scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).cmd;\
+ rm -f $(depfile)
# Usage: $(call if_changed_rule,foo)
# Will check if $(cmd_foo) or any of the prerequisites changed,
# and if so will execute $(rule_foo).
-if_changed_rule = $(if $(strip $(any-prereq) $(arg-check) ), \
- @set -e; \
- $(rule_$(1)))
+if_changed_rule = $(if $(newer-prereqs)$(cmd-check),$(rule_$(1)),@:)
###
-# why - tell why a a target got build
+# why - tell why a target got built
# enabled by make V=2
# Output (listed in the order they are checked):
# (1) - due to target is PHONY
@@ -244,8 +243,8 @@ ifeq ($(KBUILD_VERBOSE),2)
why = \
$(if $(filter $@, $(PHONY)),- due to target is PHONY, \
$(if $(wildcard $@), \
- $(if $(strip $(any-prereq)),- due to: $(any-prereq), \
- $(if $(arg-check), \
+ $(if $(newer-prereqs),- due to: $(newer-prereqs), \
+ $(if $(cmd-check), \
$(if $(cmd_$@),- due to command line change, \
$(if $(filter $@, $(targets)), \
- due to missing .cmd file, \
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 002afd245..2273d815c 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -88,10 +88,10 @@ __build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(pbl-target) $(
# Linus' kernel sanity checking tool
ifeq ($(KBUILD_CHECKSRC),1)
quiet_cmd_checksrc = CHECK $<
- cmd_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
+ cmd_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $<
else ifeq ($(KBUILD_CHECKSRC),2)
quiet_cmd_force_checksrc = CHECK $<
- cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
+ cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $<
endif
# Compile C sources (.c)
@@ -137,73 +137,23 @@ cmd_cc_i_c = $(CPP) $(c_flags) -o $@ $<
%.i: %.c FORCE
$(call if_changed_dep,cc_i_c)
-quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
-cmd_cc_symtypes_c = \
- $(CPP) -D__GENKSYMS__ $(c_flags) $< \
- | $(GENKSYMS) -T $@ >/dev/null; \
- test -s $@ || rm -f $@
-
-%.symtypes : %.c FORCE
- $(call if_changed_dep,cc_symtypes_c)
-
# C (.c) files
# The C file is compiled and updated dependency information is generated.
# (See cmd_cc_o_c + relevant part of rule_cc_o_c)
quiet_cmd_cc_o_c = CC $(quiet_modtag) $@
+ cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
quiet_cmd_pbl_cc_o_c = PBLCC $@
-
-ifndef CONFIG_MODVERSIONS
-cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
-cmd_pbl_cc_o_c = $(CC) -D__PBL__ $(c_flags) $(PBL_CPPFLAGS) -c -o $@ $<
-
-else
-# When module versioning is enabled the following steps are executed:
-# o compile a .tmp_<file>.o from <file>.c
-# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does
-# not export symbols, we just rename .tmp_<file>.o to <file>.o and
-# are done.
-# o otherwise, we calculate symbol versions using the good old
-# genksyms on the preprocessed source and postprocess them in a way
-# that they are usable as a linker script
-# o generate <file>.o from .tmp_<file>.o using the linker to
-# replace the unresolved symbols __crc_exported_symbol with
-# the actual value of the checksum generated by genksyms
-
-cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
-cmd_modversions = \
- if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \
- $(CPP) -D__GENKSYMS__ $(c_flags) $< \
- | $(GENKSYMS) $(if $(KBUILD_SYMTYPES), \
- -T $(@D)/$(@F:.o=.symtypes)) \
- > $(@D)/.tmp_$(@F:.o=.ver); \
- \
- $(LD) $(KBUILD_LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \
- -T $(@D)/.tmp_$(@F:.o=.ver); \
- rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \
- else \
- mv -f $(@D)/.tmp_$(@F) $@; \
- fi;
-endif
+ cmd_pbl_cc_o_c = $(CC) -D__PBL__ $(c_flags) $(PBL_CPPFLAGS) -c -o $@ $<
define rule_cc_o_c
- $(call echo-cmd,checksrc) $(cmd_checksrc) \
- $(call echo-cmd,cc_o_c) $(cmd_cc_o_c); \
- $(cmd_modversions) \
- scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' > \
- $(dot-target).tmp; \
- rm -f $(depfile); \
- mv -f $(dot-target).tmp $(dot-target).cmd
+ $(call cmd,checksrc)
+ $(call cmd_and_fixdep,cc_o_c)
endef
define rule_pbl_cc_o_c
- $(call echo-cmd,checksrc) $(cmd_checksrc) \
- $(call echo-cmd,pbl_cc_o_c) $(cmd_pbl_cc_o_c); \
- $(cmd_modversions) \
- scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,pbl_cc_o_c)' > \
- $(dot-target).tmp; \
- rm -f $(depfile); \
- mv -f $(dot-target).tmp $(dot-target).cmd
+ $(call cmd,checksrc)
+ $(call cmd_and_fixdep,pbl_cc_o_c)
endef
# Built-in and composite module parts
--
2.25.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 4/4] kbuild: sync scripts/Kbuild.include with Linux 5.7-rc2
2020-04-30 5:13 [PATCH 1/4] kbuild: do not delete $@ explicitly on failure Masahiro Yamada
2020-04-30 5:13 ` [PATCH 2/4] kbuild: sync filechk rule with Linux 5.7-rc2 Masahiro Yamada
2020-04-30 5:13 ` [PATCH 3/4] kbuild: sync if_changed and friends " Masahiro Yamada
@ 2020-04-30 5:13 ` Masahiro Yamada
2020-05-04 7:00 ` [PATCH 1/4] kbuild: do not delete $@ explicitly on failure Sascha Hauer
3 siblings, 0 replies; 5+ messages in thread
From: Masahiro Yamada @ 2020-04-30 5:13 UTC (permalink / raw)
To: barebox; +Cc: Masahiro Yamada
More random cherry-picks for scripts/Kbuild.include
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
scripts/Kbuild.include | 42 ++++++++++++++++++++++--------------------
1 file changed, 22 insertions(+), 20 deletions(-)
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index 074d2db04..838ab11e7 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
####
# kbuild: Generic definitions
@@ -23,10 +24,18 @@ depfile = $(subst $(comma),_,$(dot-target).d)
# filename of target with directory and extension stripped
basetarget = $(basename $(notdir $@))
+###
+# real prerequisites without phony targets
+real-prereqs = $(filter-out $(PHONY), $^)
+
###
# Escape single quote for use in echo statements
escsq = $(subst $(squote),'\$(squote)',$1)
+###
+# Quote a string to pass it to C files. foo => '"foo"'
+stringify = $(squote)$(quote)$1$(quote)$(squote)
+
###
# Easy method for doing a status message
kecho := :
@@ -62,18 +71,19 @@ endef
######
# gcc support functions
-# See documentation in Documentation/kbuild/makefiles.txt
+# See documentation in Documentation/kbuild/makefiles.rst
# cc-cross-prefix
# Usage: CROSS_COMPILE := $(call cc-cross-prefix, m68k-linux-gnu- m68k-linux-)
-# Return first prefix where a prefix$(CC) is found in PATH.
-# If no $(CC) found in PATH with listed prefixes return nothing
-cc-cross-prefix = \
- $(word 1, $(foreach c,$(1), \
- $(shell set -e; \
- if (which $(strip $(c))$(CC)) > /dev/null 2>&1 ; then \
- echo $(c); \
- fi)))
+# Return first <prefix> where a <prefix>gcc is found in PATH.
+# If no gcc found in PATH with listed prefixes return nothing
+#
+# Note: '2>/dev/null' is here to force Make to invoke a shell. Otherwise, it
+# would try to directly execute the shell builtin 'command'. This workaround
+# should be kept for a long time since this issue was fixed only after the
+# GNU Make 4.2.1 release.
+cc-cross-prefix = $(firstword $(foreach c, $(1), \
+ $(if $(shell command -v -- $(c)gcc 2>/dev/null), $(c))))
# output directory for tests below
TMPOUT := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/)
@@ -138,18 +148,13 @@ ld-option = $(call try-run,\
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
# Usage:
# $(Q)$(MAKE) $(build)=dir
-build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
+build := -f $(srctree)/scripts/Makefile.build obj
###
-# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.modbuiltin obj=
-# Usage:
-# $(Q)$(MAKE) $(modbuiltin)=dir
-modbuiltin := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.modbuiltin obj
-
-# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
+# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=
# Usage:
# $(Q)$(MAKE) $(clean)=dir
-clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+clean := -f $(srctree)/scripts/Makefile.clean obj
# Prefix -I with $(srctree) if it is not an absolute path.
# skip if -I has no parameter
@@ -167,9 +172,6 @@ echo-cmd = $(if $($(quiet)cmd_$(1)),\
# printing commands
cmd = @set -e; $(echo-cmd) $(cmd_$(1))
-# Add $(obj)/ for paths that are not absolute
-objectify = $(foreach o,$(1),$(if $(filter /%,$(o)),$(o),$(obj)/$(o)))
-
###
# if_changed - execute command if any prerequisite is newer than
# target, or command line has changed
--
2.25.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply related [flat|nested] 5+ messages in thread