* [PATCH 1/3] dt-bindings: phy: Convert UniPhier PCIe-PHY controller to json-schema @ 2020-04-28 6:34 ` Kunihiko Hayashi 0 siblings, 0 replies; 12+ messages in thread From: Kunihiko Hayashi @ 2020-04-28 6:34 UTC (permalink / raw) To: Kishon Vijay Abraham I, Rob Herring, Masahiro Yamada Cc: devicetree, Kunihiko Hayashi, linux-kernel, linux-arm-kernel Convert the UniPhier PCIe-PHY controller to DT schema format. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- .../bindings/phy/socionext,uniphier-pcie-phy.yaml | 77 ++++++++++++++++++++++ .../devicetree/bindings/phy/uniphier-pcie-phy.txt | 36 ---------- 2 files changed, 77 insertions(+), 36 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml new file mode 100644 index 0000000..86f4909 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier PCIe PHY + +description: | + This describes the devicetree bindings for PHY interface built into + PCIe controller implemented on Socionext UniPhier SoCs. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +properties: + compatible: + enum: + - socionext,uniphier-pro5-pcie-phy + - socionext,uniphier-ld20-pcie-phy + - socionext,uniphier-pxs3-pcie-phy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + oneOf: + - items: # for Pro5 + - const: gio + - const: link + - const: link # for others + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + oneOf: + - items: # for Pro5 + - const: gio + - const: link + - const: link # for others + + socionext,syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to system control to set configurations for phy + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + pcie_phy: phy@66038000 { + compatible = "socionext,uniphier-ld20-pcie-phy"; + reg = <0x66038000 0x4000>; + #phy-cells = <0>; + clock-names = "link"; + clocks = <&sys_clk 24>; + reset-names = "link"; + resets = <&sys_rst 24>; + socionext,syscon = <&soc_glue>; + }; diff --git a/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt b/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt deleted file mode 100644 index 3cee372..0000000 --- a/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt +++ /dev/null @@ -1,36 +0,0 @@ -Socionext UniPhier PCIe PHY bindings - -This describes the devicetree bindings for PHY interface built into -PCIe controller implemented on Socionext UniPhier SoCs. - -Required properties: -- compatible: Should contain one of the following: - "socionext,uniphier-pro5-pcie-phy" - for Pro5 PHY - "socionext,uniphier-ld20-pcie-phy" - for LD20 PHY - "socionext,uniphier-pxs3-pcie-phy" - for PXs3 PHY -- reg: Specifies offset and length of the register set for the device. -- #phy-cells: Must be zero. -- clocks: A list of phandles to the clock gate for PCIe glue layer - including this phy. -- clock-names: For Pro5 only, should contain the following: - "gio", "link" - for Pro5 SoC -- resets: A list of phandles to the reset line for PCIe glue layer - including this phy. -- reset-names: For Pro5 only, should contain the following: - "gio", "link" - for Pro5 SoC - -Optional properties: -- socionext,syscon: A phandle to system control to set configurations - for phy. - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - pcie_phy: phy@66038000 { - compatible = "socionext,uniphier-ld20-pcie-phy"; - reg = <0x66038000 0x4000>; - #phy-cells = <0>; - clocks = <&sys_clk 24>; - resets = <&sys_rst 24>; - socionext,syscon = <&soc_glue>; - }; -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 1/3] dt-bindings: phy: Convert UniPhier PCIe-PHY controller to json-schema @ 2020-04-28 6:34 ` Kunihiko Hayashi 0 siblings, 0 replies; 12+ messages in thread From: Kunihiko Hayashi @ 2020-04-28 6:34 UTC (permalink / raw) To: Kishon Vijay Abraham I, Rob Herring, Masahiro Yamada Cc: devicetree, linux-arm-kernel, linux-kernel, Kunihiko Hayashi Convert the UniPhier PCIe-PHY controller to DT schema format. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- .../bindings/phy/socionext,uniphier-pcie-phy.yaml | 77 ++++++++++++++++++++++ .../devicetree/bindings/phy/uniphier-pcie-phy.txt | 36 ---------- 2 files changed, 77 insertions(+), 36 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml new file mode 100644 index 0000000..86f4909 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier PCIe PHY + +description: | + This describes the devicetree bindings for PHY interface built into + PCIe controller implemented on Socionext UniPhier SoCs. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +properties: + compatible: + enum: + - socionext,uniphier-pro5-pcie-phy + - socionext,uniphier-ld20-pcie-phy + - socionext,uniphier-pxs3-pcie-phy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + oneOf: + - items: # for Pro5 + - const: gio + - const: link + - const: link # for others + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + oneOf: + - items: # for Pro5 + - const: gio + - const: link + - const: link # for others + + socionext,syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to system control to set configurations for phy + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + pcie_phy: phy@66038000 { + compatible = "socionext,uniphier-ld20-pcie-phy"; + reg = <0x66038000 0x4000>; + #phy-cells = <0>; + clock-names = "link"; + clocks = <&sys_clk 24>; + reset-names = "link"; + resets = <&sys_rst 24>; + socionext,syscon = <&soc_glue>; + }; diff --git a/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt b/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt deleted file mode 100644 index 3cee372..0000000 --- a/Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt +++ /dev/null @@ -1,36 +0,0 @@ -Socionext UniPhier PCIe PHY bindings - -This describes the devicetree bindings for PHY interface built into -PCIe controller implemented on Socionext UniPhier SoCs. - -Required properties: -- compatible: Should contain one of the following: - "socionext,uniphier-pro5-pcie-phy" - for Pro5 PHY - "socionext,uniphier-ld20-pcie-phy" - for LD20 PHY - "socionext,uniphier-pxs3-pcie-phy" - for PXs3 PHY -- reg: Specifies offset and length of the register set for the device. -- #phy-cells: Must be zero. -- clocks: A list of phandles to the clock gate for PCIe glue layer - including this phy. -- clock-names: For Pro5 only, should contain the following: - "gio", "link" - for Pro5 SoC -- resets: A list of phandles to the reset line for PCIe glue layer - including this phy. -- reset-names: For Pro5 only, should contain the following: - "gio", "link" - for Pro5 SoC - -Optional properties: -- socionext,syscon: A phandle to system control to set configurations - for phy. - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - pcie_phy: phy@66038000 { - compatible = "socionext,uniphier-ld20-pcie-phy"; - reg = <0x66038000 0x4000>; - #phy-cells = <0>; - clocks = <&sys_clk 24>; - resets = <&sys_rst 24>; - socionext,syscon = <&soc_glue>; - }; -- 2.7.4 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/3] dt-bindings: phy: Convert UniPhier USB2-PHY controller to json-schema 2020-04-28 6:34 ` Kunihiko Hayashi @ 2020-04-28 6:34 ` Kunihiko Hayashi -1 siblings, 0 replies; 12+ messages in thread From: Kunihiko Hayashi @ 2020-04-28 6:34 UTC (permalink / raw) To: Kishon Vijay Abraham I, Rob Herring, Masahiro Yamada Cc: devicetree, Kunihiko Hayashi, linux-kernel, linux-arm-kernel Convert the UniPhier USB2-PHY conroller to DT schema format. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- .../bindings/phy/socionext,uniphier-usb2-phy.yaml | 85 ++++++++++++++++++++++ .../devicetree/bindings/phy/uniphier-usb2-phy.txt | 45 ------------ 2 files changed, 85 insertions(+), 45 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml new file mode 100644 index 0000000..479b203 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier USB2 PHY + +description: | + This describes the devicetree bindings for PHY interface built into + USB2 controller implemented on Socionext UniPhier SoCs. + Pro4 SoC has both USB2 and USB3 host controllers, however, this USB3 + controller doesn't include its own High-Speed PHY. This needs to specify + USB2 PHY instead of USB3 HS-PHY. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +properties: + compatible: + enum: + - socionext,uniphier-pro4-usb2-phy + - socionext,uniphier-ld11-usb2-phy + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^phy@[0-9]+$": + type: object + additionalProperties: false + + properties: + reg: + minimum: 0 + maximum: 3 + description: + The ID number for the PHY + + "#phy-cells": + const: 0 + + required: + - reg + - "#phy-cells" + +required: + - compatible + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + // The UniPhier usb2-phy should be a subnode of a "syscon" compatible node. + + soc-glue@5f800000 { + compatible = "socionext,uniphier-ld11-soc-glue", "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + usb-controller { + compatible = "socionext,uniphier-ld11-usb2-phy"; + #address-cells = <1>; + #size-cells = <0>; + + usb_phy0: phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + usb_phy1: phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + + usb_phy2: phy@2 { + reg = <2>; + #phy-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt deleted file mode 100644 index b43b282..0000000 --- a/Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt +++ /dev/null @@ -1,45 +0,0 @@ -Socionext UniPhier USB2 PHY - -This describes the devicetree bindings for PHY interface built into -USB2 controller implemented on Socionext UniPhier SoCs. - -Pro4 SoC has both USB2 and USB3 host controllers, however, this USB3 -controller doesn't include its own High-Speed PHY. This needs to specify -USB2 PHY instead of USB3 HS-PHY. - -Required properties: -- compatible: Should contain one of the following: - "socionext,uniphier-pro4-usb2-phy" - for Pro4 SoC - "socionext,uniphier-ld11-usb2-phy" - for LD11 SoC - -Sub-nodes: -Each PHY should be represented as a sub-node. - -Sub-nodes required properties: -- #phy-cells: Should be 0. -- reg: The number of the PHY. - -Sub-nodes optional properties: -- vbus-supply: A phandle to the regulator for USB VBUS. - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - soc-glue@5f800000 { - ... - usb-phy { - compatible = "socionext,uniphier-ld11-usb2-phy"; - usb_phy0: phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - ... - }; - }; - - usb@5a800100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - ... - phy-names = "usb"; - phys = <&usb_phy0>; - }; -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/3] dt-bindings: phy: Convert UniPhier USB2-PHY controller to json-schema @ 2020-04-28 6:34 ` Kunihiko Hayashi 0 siblings, 0 replies; 12+ messages in thread From: Kunihiko Hayashi @ 2020-04-28 6:34 UTC (permalink / raw) To: Kishon Vijay Abraham I, Rob Herring, Masahiro Yamada Cc: devicetree, linux-arm-kernel, linux-kernel, Kunihiko Hayashi Convert the UniPhier USB2-PHY conroller to DT schema format. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- .../bindings/phy/socionext,uniphier-usb2-phy.yaml | 85 ++++++++++++++++++++++ .../devicetree/bindings/phy/uniphier-usb2-phy.txt | 45 ------------ 2 files changed, 85 insertions(+), 45 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml new file mode 100644 index 0000000..479b203 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier USB2 PHY + +description: | + This describes the devicetree bindings for PHY interface built into + USB2 controller implemented on Socionext UniPhier SoCs. + Pro4 SoC has both USB2 and USB3 host controllers, however, this USB3 + controller doesn't include its own High-Speed PHY. This needs to specify + USB2 PHY instead of USB3 HS-PHY. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +properties: + compatible: + enum: + - socionext,uniphier-pro4-usb2-phy + - socionext,uniphier-ld11-usb2-phy + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^phy@[0-9]+$": + type: object + additionalProperties: false + + properties: + reg: + minimum: 0 + maximum: 3 + description: + The ID number for the PHY + + "#phy-cells": + const: 0 + + required: + - reg + - "#phy-cells" + +required: + - compatible + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + // The UniPhier usb2-phy should be a subnode of a "syscon" compatible node. + + soc-glue@5f800000 { + compatible = "socionext,uniphier-ld11-soc-glue", "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + usb-controller { + compatible = "socionext,uniphier-ld11-usb2-phy"; + #address-cells = <1>; + #size-cells = <0>; + + usb_phy0: phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + usb_phy1: phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + + usb_phy2: phy@2 { + reg = <2>; + #phy-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt deleted file mode 100644 index b43b282..0000000 --- a/Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt +++ /dev/null @@ -1,45 +0,0 @@ -Socionext UniPhier USB2 PHY - -This describes the devicetree bindings for PHY interface built into -USB2 controller implemented on Socionext UniPhier SoCs. - -Pro4 SoC has both USB2 and USB3 host controllers, however, this USB3 -controller doesn't include its own High-Speed PHY. This needs to specify -USB2 PHY instead of USB3 HS-PHY. - -Required properties: -- compatible: Should contain one of the following: - "socionext,uniphier-pro4-usb2-phy" - for Pro4 SoC - "socionext,uniphier-ld11-usb2-phy" - for LD11 SoC - -Sub-nodes: -Each PHY should be represented as a sub-node. - -Sub-nodes required properties: -- #phy-cells: Should be 0. -- reg: The number of the PHY. - -Sub-nodes optional properties: -- vbus-supply: A phandle to the regulator for USB VBUS. - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - soc-glue@5f800000 { - ... - usb-phy { - compatible = "socionext,uniphier-ld11-usb2-phy"; - usb_phy0: phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - ... - }; - }; - - usb@5a800100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - ... - phy-names = "usb"; - phys = <&usb_phy0>; - }; -- 2.7.4 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 2/3] dt-bindings: phy: Convert UniPhier USB2-PHY controller to json-schema 2020-04-28 6:34 ` Kunihiko Hayashi @ 2020-05-12 2:04 ` Rob Herring -1 siblings, 0 replies; 12+ messages in thread From: Rob Herring @ 2020-05-12 2:04 UTC (permalink / raw) To: Kunihiko Hayashi Cc: devicetree, linux-kernel, Kishon Vijay Abraham I, Masahiro Yamada, Rob Herring, linux-arm-kernel On Tue, 28 Apr 2020 15:34:49 +0900, Kunihiko Hayashi wrote: > Convert the UniPhier USB2-PHY conroller to DT schema format. > > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> > --- > .../bindings/phy/socionext,uniphier-usb2-phy.yaml | 85 ++++++++++++++++++++++ > .../devicetree/bindings/phy/uniphier-usb2-phy.txt | 45 ------------ > 2 files changed, 85 insertions(+), 45 deletions(-) > create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml > delete mode 100644 Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt > Applied, thanks! _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/3] dt-bindings: phy: Convert UniPhier USB2-PHY controller to json-schema @ 2020-05-12 2:04 ` Rob Herring 0 siblings, 0 replies; 12+ messages in thread From: Rob Herring @ 2020-05-12 2:04 UTC (permalink / raw) To: Kunihiko Hayashi Cc: linux-arm-kernel, Masahiro Yamada, Kishon Vijay Abraham I, devicetree, linux-kernel, Rob Herring On Tue, 28 Apr 2020 15:34:49 +0900, Kunihiko Hayashi wrote: > Convert the UniPhier USB2-PHY conroller to DT schema format. > > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> > --- > .../bindings/phy/socionext,uniphier-usb2-phy.yaml | 85 ++++++++++++++++++++++ > .../devicetree/bindings/phy/uniphier-usb2-phy.txt | 45 ------------ > 2 files changed, 85 insertions(+), 45 deletions(-) > create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml > delete mode 100644 Documentation/devicetree/bindings/phy/uniphier-usb2-phy.txt > Applied, thanks! ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 3/3] dt-bindings: phy: Convert UniPhier USB3-PHY conroller to json-schema 2020-04-28 6:34 ` Kunihiko Hayashi @ 2020-04-28 6:34 ` Kunihiko Hayashi -1 siblings, 0 replies; 12+ messages in thread From: Kunihiko Hayashi @ 2020-04-28 6:34 UTC (permalink / raw) To: Kishon Vijay Abraham I, Rob Herring, Masahiro Yamada Cc: devicetree, Kunihiko Hayashi, linux-kernel, linux-arm-kernel Convert the UniPhier USB3-PHY controller for SS/HS to DT schema format. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- .../phy/socionext,uniphier-usb3hs-phy.yaml | 104 +++++++++++++++++++++ .../phy/socionext,uniphier-usb3ss-phy.yaml | 97 +++++++++++++++++++ .../bindings/phy/uniphier-usb3-hsphy.txt | 69 -------------- .../bindings/phy/uniphier-usb3-ssphy.txt | 58 ------------ 4 files changed, 201 insertions(+), 127 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt delete mode 100644 Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml new file mode 100644 index 0000000..a92a034 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3hs-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier USB3 High-Speed (HS) PHY + +description: | + This describes the devicetree bindings for PHY interfaces built into + USB3 controller implemented on Socionext UniPhier SoCs. + Although the controller includes High-Speed PHY and Super-Speed PHY, + this describes about High-Speed PHY. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +properties: + compatible: + enum: + - socionext,uniphier-pro5-usb3-hsphy + - socionext,uniphier-pxs2-usb3-hsphy + - socionext,uniphier-ld20-usb3-hsphy + - socionext,uniphier-pxs3-usb3-hsphy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + oneOf: + - const: link # for PXs2 + - items: # for PXs3 + - const: link + - const: phy + + resets: + maxItems: 2 + + reset-names: + items: + - const: link + - const: phy + + vbus-supply: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to the regulator for USB VBUS + + nvmem-cells: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Phandles to nvmem cell that contains the trimming data. + Available only for HS-PHY implemented on LD20 and PXs3, and + if unspecified, default value is used. + + nvmem-cell-names: + items: + - const: rterm + - const: sel_t + - const: hs_i + description: + Should be the following names, which correspond to each nvmem-cells. + All of the 3 parameters associated with the above names are + required for each port, if any one is omitted, the trimming data + of the port will not be set at all. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus0>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, <&usb_hs_i0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml new file mode 100644 index 0000000..ed67707 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3ss-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier USB3 Super-Speed (SS) PHY + +description: | + This describes the devicetree bindings for PHY interfaces built into + USB3 controller implemented on Socionext UniPhier SoCs. + Although the controller includes High-Speed PHY and Super-Speed PHY, + this describes about Super-Speed PHY. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +properties: + compatible: + enum: + - socionext,uniphier-pro4-usb3-ssphy + - socionext,uniphier-pro5-usb3-ssphy + - socionext,uniphier-pxs2-usb3-ssphy + - socionext,uniphier-ld20-usb3-ssphy + - socionext,uniphier-pxs3-usb3-ssphy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + oneOf: + - items: # for Pro4, Pro5 + - const: gio + - const: link + - items: # for PXs3 with phy-ext + - const: link + - const: phy + - const: phy-ext + - items: # for others + - const: link + - const: phy + + resets: + maxItems: 2 + + reset-names: + oneOf: + - items: # for Pro4,Pro5 + - const: gio + - const: link + - items: # for others + - const: link + - const: phy + + vbus-supply: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to the regulator for USB VBUS + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + - vbus-supply + +additionalProperties: false + +examples: + - | + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-ld20-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt deleted file mode 100644 index 093d4f0..0000000 --- a/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt +++ /dev/null @@ -1,69 +0,0 @@ -Socionext UniPhier USB3 High-Speed (HS) PHY - -This describes the devicetree bindings for PHY interfaces built into -USB3 controller implemented on Socionext UniPhier SoCs. -Although the controller includes High-Speed PHY and Super-Speed PHY, -this describes about High-Speed PHY. - -Required properties: -- compatible: Should contain one of the following: - "socionext,uniphier-pro5-usb3-hsphy" - for Pro5 SoC - "socionext,uniphier-pxs2-usb3-hsphy" - for PXs2 SoC - "socionext,uniphier-ld20-usb3-hsphy" - for LD20 SoC - "socionext,uniphier-pxs3-usb3-hsphy" - for PXs3 SoC -- reg: Specifies offset and length of the register set for the device. -- #phy-cells: Should be 0. -- clocks: A list of phandles to the clock gate for USB3 glue layer. - According to the clock-names, appropriate clocks are required. -- clock-names: Should contain the following: - "gio", "link" - for Pro5 SoC - "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional. - "phy", "link" - for others -- resets: A list of phandles to the reset control for USB3 glue layer. - According to the reset-names, appropriate resets are required. -- reset-names: Should contain the following: - "gio", "link" - for Pro5 SoC - "phy", "link" - for others - -Optional properties: -- vbus-supply: A phandle to the regulator for USB VBUS. -- nvmem-cells: Phandles to nvmem cell that contains the trimming data. - Available only for HS-PHY implemented on LD20 and PXs3, and - if unspecified, default value is used. -- nvmem-cell-names: Should be the following names, which correspond to - each nvmem-cells. - All of the 3 parameters associated with the following names are - required for each port, if any one is omitted, the trimming data - of the port will not be set at all. - "rterm", "sel_t", "hs_i" - Each cell name for phy parameters - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - - usb-glue@65b00000 { - compatible = "socionext,uniphier-ld20-dwc3-glue", - "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x65b00000 0x400>; - - usb_vbus0: regulator { - ... - }; - - usb_hsphy0: hs-phy@200 { - compatible = "socionext,uniphier-ld20-usb3-hsphy"; - reg = <0x200 0x10>; - #phy-cells = <0>; - clock-names = "link", "phy"; - clocks = <&sys_clk 14>, <&sys_clk 16>; - reset-names = "link", "phy"; - resets = <&sys_rst 14>, <&sys_rst 16>; - vbus-supply = <&usb_vbus0>; - nvmem-cell-names = "rterm", "sel_t", "hs_i"; - nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, - <&usb_hs_i0>; - }; - ... - }; diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt deleted file mode 100644 index 9df2bc2..0000000 --- a/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt +++ /dev/null @@ -1,58 +0,0 @@ -Socionext UniPhier USB3 Super-Speed (SS) PHY - -This describes the devicetree bindings for PHY interfaces built into -USB3 controller implemented on Socionext UniPhier SoCs. -Although the controller includes High-Speed PHY and Super-Speed PHY, -this describes about Super-Speed PHY. - -Required properties: -- compatible: Should contain one of the following: - "socionext,uniphier-pro4-usb3-ssphy" - for Pro4 SoC - "socionext,uniphier-pro5-usb3-ssphy" - for Pro5 SoC - "socionext,uniphier-pxs2-usb3-ssphy" - for PXs2 SoC - "socionext,uniphier-ld20-usb3-ssphy" - for LD20 SoC - "socionext,uniphier-pxs3-usb3-ssphy" - for PXs3 SoC -- reg: Specifies offset and length of the register set for the device. -- #phy-cells: Should be 0. -- clocks: A list of phandles to the clock gate for USB3 glue layer. - According to the clock-names, appropriate clocks are required. -- clock-names: - "gio", "link" - for Pro4 and Pro5 SoC - "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional. - "phy", "link" - for others -- resets: A list of phandles to the reset control for USB3 glue layer. - According to the reset-names, appropriate resets are required. -- reset-names: - "gio", "link" - for Pro4 and Pro5 SoC - "phy", "link" - for others - -Optional properties: -- vbus-supply: A phandle to the regulator for USB VBUS. - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - - usb-glue@65b00000 { - compatible = "socionext,uniphier-ld20-dwc3-glue", - "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x65b00000 0x400>; - - usb_vbus0: regulator { - ... - }; - - usb_ssphy0: ss-phy@300 { - compatible = "socionext,uniphier-ld20-usb3-ssphy"; - reg = <0x300 0x10>; - #phy-cells = <0>; - clock-names = "link", "phy"; - clocks = <&sys_clk 14>, <&sys_clk 16>; - reset-names = "link", "phy"; - resets = <&sys_rst 14>, <&sys_rst 16>; - vbus-supply = <&usb_vbus0>; - }; - ... - }; -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 3/3] dt-bindings: phy: Convert UniPhier USB3-PHY conroller to json-schema @ 2020-04-28 6:34 ` Kunihiko Hayashi 0 siblings, 0 replies; 12+ messages in thread From: Kunihiko Hayashi @ 2020-04-28 6:34 UTC (permalink / raw) To: Kishon Vijay Abraham I, Rob Herring, Masahiro Yamada Cc: devicetree, linux-arm-kernel, linux-kernel, Kunihiko Hayashi Convert the UniPhier USB3-PHY controller for SS/HS to DT schema format. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- .../phy/socionext,uniphier-usb3hs-phy.yaml | 104 +++++++++++++++++++++ .../phy/socionext,uniphier-usb3ss-phy.yaml | 97 +++++++++++++++++++ .../bindings/phy/uniphier-usb3-hsphy.txt | 69 -------------- .../bindings/phy/uniphier-usb3-ssphy.txt | 58 ------------ 4 files changed, 201 insertions(+), 127 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt delete mode 100644 Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml new file mode 100644 index 0000000..a92a034 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3hs-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier USB3 High-Speed (HS) PHY + +description: | + This describes the devicetree bindings for PHY interfaces built into + USB3 controller implemented on Socionext UniPhier SoCs. + Although the controller includes High-Speed PHY and Super-Speed PHY, + this describes about High-Speed PHY. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +properties: + compatible: + enum: + - socionext,uniphier-pro5-usb3-hsphy + - socionext,uniphier-pxs2-usb3-hsphy + - socionext,uniphier-ld20-usb3-hsphy + - socionext,uniphier-pxs3-usb3-hsphy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + oneOf: + - const: link # for PXs2 + - items: # for PXs3 + - const: link + - const: phy + + resets: + maxItems: 2 + + reset-names: + items: + - const: link + - const: phy + + vbus-supply: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to the regulator for USB VBUS + + nvmem-cells: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Phandles to nvmem cell that contains the trimming data. + Available only for HS-PHY implemented on LD20 and PXs3, and + if unspecified, default value is used. + + nvmem-cell-names: + items: + - const: rterm + - const: sel_t + - const: hs_i + description: + Should be the following names, which correspond to each nvmem-cells. + All of the 3 parameters associated with the above names are + required for each port, if any one is omitted, the trimming data + of the port will not be set at all. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus0>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, <&usb_hs_i0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml new file mode 100644 index 0000000..ed67707 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3ss-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier USB3 Super-Speed (SS) PHY + +description: | + This describes the devicetree bindings for PHY interfaces built into + USB3 controller implemented on Socionext UniPhier SoCs. + Although the controller includes High-Speed PHY and Super-Speed PHY, + this describes about Super-Speed PHY. + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +properties: + compatible: + enum: + - socionext,uniphier-pro4-usb3-ssphy + - socionext,uniphier-pro5-usb3-ssphy + - socionext,uniphier-pxs2-usb3-ssphy + - socionext,uniphier-ld20-usb3-ssphy + - socionext,uniphier-pxs3-usb3-ssphy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + oneOf: + - items: # for Pro4, Pro5 + - const: gio + - const: link + - items: # for PXs3 with phy-ext + - const: link + - const: phy + - const: phy-ext + - items: # for others + - const: link + - const: phy + + resets: + maxItems: 2 + + reset-names: + oneOf: + - items: # for Pro4,Pro5 + - const: gio + - const: link + - items: # for others + - const: link + - const: phy + + vbus-supply: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to the regulator for USB VBUS + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + - vbus-supply + +additionalProperties: false + +examples: + - | + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-ld20-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt deleted file mode 100644 index 093d4f0..0000000 --- a/Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt +++ /dev/null @@ -1,69 +0,0 @@ -Socionext UniPhier USB3 High-Speed (HS) PHY - -This describes the devicetree bindings for PHY interfaces built into -USB3 controller implemented on Socionext UniPhier SoCs. -Although the controller includes High-Speed PHY and Super-Speed PHY, -this describes about High-Speed PHY. - -Required properties: -- compatible: Should contain one of the following: - "socionext,uniphier-pro5-usb3-hsphy" - for Pro5 SoC - "socionext,uniphier-pxs2-usb3-hsphy" - for PXs2 SoC - "socionext,uniphier-ld20-usb3-hsphy" - for LD20 SoC - "socionext,uniphier-pxs3-usb3-hsphy" - for PXs3 SoC -- reg: Specifies offset and length of the register set for the device. -- #phy-cells: Should be 0. -- clocks: A list of phandles to the clock gate for USB3 glue layer. - According to the clock-names, appropriate clocks are required. -- clock-names: Should contain the following: - "gio", "link" - for Pro5 SoC - "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional. - "phy", "link" - for others -- resets: A list of phandles to the reset control for USB3 glue layer. - According to the reset-names, appropriate resets are required. -- reset-names: Should contain the following: - "gio", "link" - for Pro5 SoC - "phy", "link" - for others - -Optional properties: -- vbus-supply: A phandle to the regulator for USB VBUS. -- nvmem-cells: Phandles to nvmem cell that contains the trimming data. - Available only for HS-PHY implemented on LD20 and PXs3, and - if unspecified, default value is used. -- nvmem-cell-names: Should be the following names, which correspond to - each nvmem-cells. - All of the 3 parameters associated with the following names are - required for each port, if any one is omitted, the trimming data - of the port will not be set at all. - "rterm", "sel_t", "hs_i" - Each cell name for phy parameters - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - - usb-glue@65b00000 { - compatible = "socionext,uniphier-ld20-dwc3-glue", - "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x65b00000 0x400>; - - usb_vbus0: regulator { - ... - }; - - usb_hsphy0: hs-phy@200 { - compatible = "socionext,uniphier-ld20-usb3-hsphy"; - reg = <0x200 0x10>; - #phy-cells = <0>; - clock-names = "link", "phy"; - clocks = <&sys_clk 14>, <&sys_clk 16>; - reset-names = "link", "phy"; - resets = <&sys_rst 14>, <&sys_rst 16>; - vbus-supply = <&usb_vbus0>; - nvmem-cell-names = "rterm", "sel_t", "hs_i"; - nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, - <&usb_hs_i0>; - }; - ... - }; diff --git a/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt b/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt deleted file mode 100644 index 9df2bc2..0000000 --- a/Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt +++ /dev/null @@ -1,58 +0,0 @@ -Socionext UniPhier USB3 Super-Speed (SS) PHY - -This describes the devicetree bindings for PHY interfaces built into -USB3 controller implemented on Socionext UniPhier SoCs. -Although the controller includes High-Speed PHY and Super-Speed PHY, -this describes about Super-Speed PHY. - -Required properties: -- compatible: Should contain one of the following: - "socionext,uniphier-pro4-usb3-ssphy" - for Pro4 SoC - "socionext,uniphier-pro5-usb3-ssphy" - for Pro5 SoC - "socionext,uniphier-pxs2-usb3-ssphy" - for PXs2 SoC - "socionext,uniphier-ld20-usb3-ssphy" - for LD20 SoC - "socionext,uniphier-pxs3-usb3-ssphy" - for PXs3 SoC -- reg: Specifies offset and length of the register set for the device. -- #phy-cells: Should be 0. -- clocks: A list of phandles to the clock gate for USB3 glue layer. - According to the clock-names, appropriate clocks are required. -- clock-names: - "gio", "link" - for Pro4 and Pro5 SoC - "phy", "phy-ext", "link" - for PXs3 SoC, "phy-ext" is optional. - "phy", "link" - for others -- resets: A list of phandles to the reset control for USB3 glue layer. - According to the reset-names, appropriate resets are required. -- reset-names: - "gio", "link" - for Pro4 and Pro5 SoC - "phy", "link" - for others - -Optional properties: -- vbus-supply: A phandle to the regulator for USB VBUS. - -Refer to phy/phy-bindings.txt for the generic PHY binding properties. - -Example: - - usb-glue@65b00000 { - compatible = "socionext,uniphier-ld20-dwc3-glue", - "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x65b00000 0x400>; - - usb_vbus0: regulator { - ... - }; - - usb_ssphy0: ss-phy@300 { - compatible = "socionext,uniphier-ld20-usb3-ssphy"; - reg = <0x300 0x10>; - #phy-cells = <0>; - clock-names = "link", "phy"; - clocks = <&sys_clk 14>, <&sys_clk 16>; - reset-names = "link", "phy"; - resets = <&sys_rst 14>, <&sys_rst 16>; - vbus-supply = <&usb_vbus0>; - }; - ... - }; -- 2.7.4 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 3/3] dt-bindings: phy: Convert UniPhier USB3-PHY conroller to json-schema 2020-04-28 6:34 ` Kunihiko Hayashi @ 2020-05-12 2:04 ` Rob Herring -1 siblings, 0 replies; 12+ messages in thread From: Rob Herring @ 2020-05-12 2:04 UTC (permalink / raw) To: Kunihiko Hayashi Cc: devicetree, linux-kernel, Kishon Vijay Abraham I, Masahiro Yamada, Rob Herring, linux-arm-kernel On Tue, 28 Apr 2020 15:34:50 +0900, Kunihiko Hayashi wrote: > Convert the UniPhier USB3-PHY controller for SS/HS to DT schema format. > > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> > --- > .../phy/socionext,uniphier-usb3hs-phy.yaml | 104 +++++++++++++++++++++ > .../phy/socionext,uniphier-usb3ss-phy.yaml | 97 +++++++++++++++++++ > .../bindings/phy/uniphier-usb3-hsphy.txt | 69 -------------- > .../bindings/phy/uniphier-usb3-ssphy.txt | 58 ------------ > 4 files changed, 201 insertions(+), 127 deletions(-) > create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml > create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml > delete mode 100644 Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt > delete mode 100644 Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt > Applied, thanks! _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/3] dt-bindings: phy: Convert UniPhier USB3-PHY conroller to json-schema @ 2020-05-12 2:04 ` Rob Herring 0 siblings, 0 replies; 12+ messages in thread From: Rob Herring @ 2020-05-12 2:04 UTC (permalink / raw) To: Kunihiko Hayashi Cc: devicetree, Kishon Vijay Abraham I, Rob Herring, linux-kernel, linux-arm-kernel, Masahiro Yamada On Tue, 28 Apr 2020 15:34:50 +0900, Kunihiko Hayashi wrote: > Convert the UniPhier USB3-PHY controller for SS/HS to DT schema format. > > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> > --- > .../phy/socionext,uniphier-usb3hs-phy.yaml | 104 +++++++++++++++++++++ > .../phy/socionext,uniphier-usb3ss-phy.yaml | 97 +++++++++++++++++++ > .../bindings/phy/uniphier-usb3-hsphy.txt | 69 -------------- > .../bindings/phy/uniphier-usb3-ssphy.txt | 58 ------------ > 4 files changed, 201 insertions(+), 127 deletions(-) > create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml > create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml > delete mode 100644 Documentation/devicetree/bindings/phy/uniphier-usb3-hsphy.txt > delete mode 100644 Documentation/devicetree/bindings/phy/uniphier-usb3-ssphy.txt > Applied, thanks! ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/3] dt-bindings: phy: Convert UniPhier PCIe-PHY controller to json-schema 2020-04-28 6:34 ` Kunihiko Hayashi @ 2020-05-12 2:03 ` Rob Herring -1 siblings, 0 replies; 12+ messages in thread From: Rob Herring @ 2020-05-12 2:03 UTC (permalink / raw) To: Kunihiko Hayashi Cc: devicetree, linux-kernel, Kishon Vijay Abraham I, Masahiro Yamada, Rob Herring, linux-arm-kernel On Tue, 28 Apr 2020 15:34:48 +0900, Kunihiko Hayashi wrote: > Convert the UniPhier PCIe-PHY controller to DT schema format. > > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> > --- > .../bindings/phy/socionext,uniphier-pcie-phy.yaml | 77 ++++++++++++++++++++++ > .../devicetree/bindings/phy/uniphier-pcie-phy.txt | 36 ---------- > 2 files changed, 77 insertions(+), 36 deletions(-) > create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml > delete mode 100644 Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt > Applied, thanks! _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/3] dt-bindings: phy: Convert UniPhier PCIe-PHY controller to json-schema @ 2020-05-12 2:03 ` Rob Herring 0 siblings, 0 replies; 12+ messages in thread From: Rob Herring @ 2020-05-12 2:03 UTC (permalink / raw) To: Kunihiko Hayashi Cc: devicetree, Rob Herring, Kishon Vijay Abraham I, linux-kernel, Masahiro Yamada, linux-arm-kernel On Tue, 28 Apr 2020 15:34:48 +0900, Kunihiko Hayashi wrote: > Convert the UniPhier PCIe-PHY controller to DT schema format. > > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> > --- > .../bindings/phy/socionext,uniphier-pcie-phy.yaml | 77 ++++++++++++++++++++++ > .../devicetree/bindings/phy/uniphier-pcie-phy.txt | 36 ---------- > 2 files changed, 77 insertions(+), 36 deletions(-) > create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml > delete mode 100644 Documentation/devicetree/bindings/phy/uniphier-pcie-phy.txt > Applied, thanks! ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2020-05-12 2:04 UTC | newest] Thread overview: 12+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2020-04-28 6:34 [PATCH 1/3] dt-bindings: phy: Convert UniPhier PCIe-PHY controller to json-schema Kunihiko Hayashi 2020-04-28 6:34 ` Kunihiko Hayashi 2020-04-28 6:34 ` [PATCH 2/3] dt-bindings: phy: Convert UniPhier USB2-PHY " Kunihiko Hayashi 2020-04-28 6:34 ` Kunihiko Hayashi 2020-05-12 2:04 ` Rob Herring 2020-05-12 2:04 ` Rob Herring 2020-04-28 6:34 ` [PATCH 3/3] dt-bindings: phy: Convert UniPhier USB3-PHY conroller " Kunihiko Hayashi 2020-04-28 6:34 ` Kunihiko Hayashi 2020-05-12 2:04 ` Rob Herring 2020-05-12 2:04 ` Rob Herring 2020-05-12 2:03 ` [PATCH 1/3] dt-bindings: phy: Convert UniPhier PCIe-PHY controller " Rob Herring 2020-05-12 2:03 ` Rob Herring
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.