All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Xin Ji <xji@analogixsemi.com>
Cc: devicetree@vger.kernel.org, devel@driverdev.osuosl.org,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Andrzej Hajda <a.hajda@samsung.com>,
	Nicolas Boichat <drinkcat@google.com>,
	Sam Ravnborg <sam@ravnborg.org>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Jonas Karlman <jonas@kwiboo.se>,
	Jernej Skrabec <jernej.skrabec@siol.net>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Dan Carpenter <dan.carpenter@oracle.com>,
	Nicolas Boichat <drinkcat@chromium.org>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Pi-Hsun Shih <pihsun@chromium.org>,
	Sheng Pan <span@analogixsemi.com>
Subject: Re: [PATCH v10 1/2] dt-bindings: drm/bridge: anx7625: MIPI to DP transmitter binding
Date: Thu, 14 May 2020 09:54:32 -0500	[thread overview]
Message-ID: <20200514145432.GA6091@bogus> (raw)
In-Reply-To: <b720f7d2c5338813d31b7f715f59ca68c367d5a8.1588747998.git.xji@analogixsemi.com>

On Wed, May 06, 2020 at 03:04:20PM +0800, Xin Ji wrote:
> The ANX7625 is an ultra-low power 4K Mobile HD Transmitter designed
> for portable device. It converts MIPI to DisplayPort 1.3 4K.
> 
> You can add support to your board with binding.

We have an example in the binding, no reason to also put in the commit 
msg.

> 
> Example:
> 	anx7625_bridge: encoder@58 {
> 		compatible = "analogix,anx7625";
> 		reg = <0x58>;
> 		status = "okay";
> 		enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
> 		reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
> 
> 		ports {
> 			#address-cells = <1>;
> 			#size-cells = <0>;
> 
> 			mipi2dp_bridge_in: port@0 {
> 				reg = <0>;
> 				anx7625_in: endpoint {
> 					remote-endpoint = <&mipi_dsi>;
> 				};
> 			};
> 
> 			mipi2dp_bridge_out: port@1 {
> 				reg = <1>;
> 				anx7625_out: endpoint {
> 					remote-endpoint = <&panel_in>;
> 				};
> 			};
> 		};
> 	};
> 
> Signed-off-by: Xin Ji <xji@analogixsemi.com>
> ---
>  .../bindings/display/bridge/analogix,anx7625.yaml  | 98 ++++++++++++++++++++++
>  1 file changed, 98 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> new file mode 100644
> index 0000000..6e54176
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> @@ -0,0 +1,98 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2019 Analogix Semiconductor, Inc.
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter)
> +
> +maintainers:
> +  - Xin Ji <xji@analogixsemi.com>
> +
> +description: |
> +  The ANX7625 is an ultra-low power 4K Mobile HD Transmitter
> +  designed for portable devices.
> +
> +properties:
> +  "#address-cells": true
> +  "#size-cells": true

These don't belong here.

> +
> +  compatible:
> +    items:
> +      - const: analogix,anx7625
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    description: used for interrupt pin B8.
> +    maxItems: 1
> +
> +  enable-gpios:
> +    description: used for power on chip control, POWER_EN pin D2.
> +    maxItems: 1
> +
> +  reset-gpios:
> +    description: used for reset chip control, RESET_N pin B7.
> +    maxItems: 1
> +
> +  ports:
> +    type: object
> +
> +    properties:
> +      port@0:
> +        type: object
> +        description:
> +          Video port for MIPI DSI input.
> +
> +      port@1:
> +        type: object
> +        description:
> +          Video port for panel or connector.
> +
> +    required:
> +        - port@0
> +        - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c0 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        anx7625_bridge: encoder@58 {

Drop any unused labels.

> +            compatible = "analogix,anx7625";
> +            reg = <0x58>;
> +            enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
> +            reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                mipi2dp_bridge_in: port@0 {
> +                    reg = <0>;
> +                    anx7625_in: endpoint {
> +                        remote-endpoint = <&mipi_dsi>;
> +                    };
> +                };
> +
> +                mipi2dp_bridge_out: port@1 {
> +                    reg = <1>;
> +                    anx7625_out: endpoint {
> +                        remote-endpoint = <&panel_in>;
> +                    };
> +                };
> +            };
> +        };
> +    };
> -- 
> 2.7.4
> 

WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Xin Ji <xji@analogixsemi.com>
Cc: devel@driverdev.osuosl.org, devicetree@vger.kernel.org,
	Jernej Skrabec <jernej.skrabec@siol.net>,
	Nicolas Boichat <drinkcat@chromium.org>,
	Pi-Hsun Shih <pihsun@chromium.org>,
	Nicolas Boichat <drinkcat@google.com>,
	David Airlie <airlied@linux.ie>,
	Neil Armstrong <narmstrong@baylibre.com>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Andrzej Hajda <a.hajda@samsung.com>,
	Jonas Karlman <jonas@kwiboo.se>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Sam Ravnborg <sam@ravnborg.org>,
	Dan Carpenter <dan.carpenter@oracle.com>,
	Sheng Pan <span@analogixsemi.com>
Subject: Re: [PATCH v10 1/2] dt-bindings: drm/bridge: anx7625: MIPI to DP transmitter binding
Date: Thu, 14 May 2020 09:54:32 -0500	[thread overview]
Message-ID: <20200514145432.GA6091@bogus> (raw)
In-Reply-To: <b720f7d2c5338813d31b7f715f59ca68c367d5a8.1588747998.git.xji@analogixsemi.com>

On Wed, May 06, 2020 at 03:04:20PM +0800, Xin Ji wrote:
> The ANX7625 is an ultra-low power 4K Mobile HD Transmitter designed
> for portable device. It converts MIPI to DisplayPort 1.3 4K.
> 
> You can add support to your board with binding.

We have an example in the binding, no reason to also put in the commit 
msg.

> 
> Example:
> 	anx7625_bridge: encoder@58 {
> 		compatible = "analogix,anx7625";
> 		reg = <0x58>;
> 		status = "okay";
> 		enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
> 		reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
> 
> 		ports {
> 			#address-cells = <1>;
> 			#size-cells = <0>;
> 
> 			mipi2dp_bridge_in: port@0 {
> 				reg = <0>;
> 				anx7625_in: endpoint {
> 					remote-endpoint = <&mipi_dsi>;
> 				};
> 			};
> 
> 			mipi2dp_bridge_out: port@1 {
> 				reg = <1>;
> 				anx7625_out: endpoint {
> 					remote-endpoint = <&panel_in>;
> 				};
> 			};
> 		};
> 	};
> 
> Signed-off-by: Xin Ji <xji@analogixsemi.com>
> ---
>  .../bindings/display/bridge/analogix,anx7625.yaml  | 98 ++++++++++++++++++++++
>  1 file changed, 98 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> new file mode 100644
> index 0000000..6e54176
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> @@ -0,0 +1,98 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2019 Analogix Semiconductor, Inc.
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter)
> +
> +maintainers:
> +  - Xin Ji <xji@analogixsemi.com>
> +
> +description: |
> +  The ANX7625 is an ultra-low power 4K Mobile HD Transmitter
> +  designed for portable devices.
> +
> +properties:
> +  "#address-cells": true
> +  "#size-cells": true

These don't belong here.

> +
> +  compatible:
> +    items:
> +      - const: analogix,anx7625
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    description: used for interrupt pin B8.
> +    maxItems: 1
> +
> +  enable-gpios:
> +    description: used for power on chip control, POWER_EN pin D2.
> +    maxItems: 1
> +
> +  reset-gpios:
> +    description: used for reset chip control, RESET_N pin B7.
> +    maxItems: 1
> +
> +  ports:
> +    type: object
> +
> +    properties:
> +      port@0:
> +        type: object
> +        description:
> +          Video port for MIPI DSI input.
> +
> +      port@1:
> +        type: object
> +        description:
> +          Video port for panel or connector.
> +
> +    required:
> +        - port@0
> +        - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c0 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        anx7625_bridge: encoder@58 {

Drop any unused labels.

> +            compatible = "analogix,anx7625";
> +            reg = <0x58>;
> +            enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
> +            reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                mipi2dp_bridge_in: port@0 {
> +                    reg = <0>;
> +                    anx7625_in: endpoint {
> +                        remote-endpoint = <&mipi_dsi>;
> +                    };
> +                };
> +
> +                mipi2dp_bridge_out: port@1 {
> +                    reg = <1>;
> +                    anx7625_out: endpoint {
> +                        remote-endpoint = <&panel_in>;
> +                    };
> +                };
> +            };
> +        };
> +    };
> -- 
> 2.7.4
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2020-05-14 14:54 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-06  7:03 [PATCH v10 0/2] Add initial support for slimport anx7625 Xin Ji
2020-05-06  7:03 ` Xin Ji
2020-05-06  7:04 ` [PATCH v10 1/2] dt-bindings: drm/bridge: anx7625: MIPI to DP transmitter binding Xin Ji
2020-05-06  7:04   ` Xin Ji
2020-05-14 14:54   ` Rob Herring [this message]
2020-05-14 14:54     ` Rob Herring
2020-05-15  2:45     ` Xin Ji
2020-05-15  2:45       ` Xin Ji
2020-05-06  7:05 ` [PATCH v10 2/2] drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP bridge driver Xin Ji
2020-05-06  7:05   ` Xin Ji

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200514145432.GA6091@bogus \
    --to=robh@kernel.org \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=dan.carpenter@oracle.com \
    --cc=daniel@ffwll.ch \
    --cc=devel@driverdev.osuosl.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=drinkcat@chromium.org \
    --cc=drinkcat@google.com \
    --cc=jernej.skrabec@siol.net \
    --cc=jonas@kwiboo.se \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=narmstrong@baylibre.com \
    --cc=pihsun@chromium.org \
    --cc=sam@ravnborg.org \
    --cc=span@analogixsemi.com \
    --cc=xji@analogixsemi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.