All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v1 1/2] MIPS: ath79: ar9331_dpt_module: update led nodes
@ 2020-05-10  6:03 Oleksij Rempel
  2020-05-10  6:03 ` [PATCH v1 2/2] MIPS: ath79: ar9331: rename uart to serial node Oleksij Rempel
  2020-05-15  8:10 ` [PATCH v1 1/2] MIPS: ath79: ar9331_dpt_module: update led nodes Thomas Bogendoerfer
  0 siblings, 2 replies; 3+ messages in thread
From: Oleksij Rempel @ 2020-05-10  6:03 UTC (permalink / raw)
  To: Rob Herring, Thomas Bogendoerfer
  Cc: Oleksij Rempel, devicetree, linux-kernel, linux-mips,
	Pengutronix Kernel Team

Fit led nodes to the latest naming schema.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/mips/boot/dts/qca/ar9331_dpt_module.dts | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
index 969d3384b0dd0..8be54465207a7 100644
--- a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
+++ b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
@@ -3,6 +3,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 #include "ar9331.dtsi"
 
@@ -22,8 +23,9 @@ memory@0 {
 	leds {
 		compatible = "gpio-leds";
 
-		system {
-			label = "dpt-module:green:system";
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
-- 
2.26.2


^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2020-05-15  8:38 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-05-10  6:03 [PATCH v1 1/2] MIPS: ath79: ar9331_dpt_module: update led nodes Oleksij Rempel
2020-05-10  6:03 ` [PATCH v1 2/2] MIPS: ath79: ar9331: rename uart to serial node Oleksij Rempel
2020-05-15  8:10 ` [PATCH v1 1/2] MIPS: ath79: ar9331_dpt_module: update led nodes Thomas Bogendoerfer

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.