All of lore.kernel.org
 help / color / mirror / Atom feed
From: mani@kernel.org
To: gregkh@linuxfoundation.org
Cc: hemantk@codeaurora.org, jhugo@codeaurora.org,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Bhaumik Bhatt <bbhatt@codeaurora.org>,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH 05/14] bus: mhi: core: Handle firmware load using state worker
Date: Thu, 21 May 2020 20:55:31 +0530	[thread overview]
Message-ID: <20200521152540.17335-6-mani@kernel.org> (raw)
In-Reply-To: <20200521152540.17335-1-mani@kernel.org>

From: Bhaumik Bhatt <bbhatt@codeaurora.org>

Upon power up, driver queues firmware worker thread if the execution
environment is PBL. Firmware worker is blocked with a timeout until
state worker gets a chance to run and unblock firmware worker. An
endpoint power up failure can be seen if state worker gets a chance to
run after firmware worker has timed out. Remove this dependency and
handle firmware load directly using state worker thread.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/bus/mhi/core/boot.c     | 18 +++---------------
 drivers/bus/mhi/core/init.c     |  1 -
 drivers/bus/mhi/core/internal.h |  1 +
 drivers/bus/mhi/core/pm.c       |  6 +-----
 include/linux/mhi.h             |  2 --
 5 files changed, 5 insertions(+), 23 deletions(-)

diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
index ebad5eb48e5a..17c636b4bc6e 100644
--- a/drivers/bus/mhi/core/boot.c
+++ b/drivers/bus/mhi/core/boot.c
@@ -377,30 +377,18 @@ static void mhi_firmware_copy(struct mhi_controller *mhi_cntrl,
 	}
 }
 
-void mhi_fw_load_worker(struct work_struct *work)
+void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
 {
-	struct mhi_controller *mhi_cntrl;
 	const struct firmware *firmware = NULL;
 	struct image_info *image_info;
-	struct device *dev;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
 	const char *fw_name;
 	void *buf;
 	dma_addr_t dma_addr;
 	size_t size;
 	int ret;
 
-	mhi_cntrl = container_of(work, struct mhi_controller, fw_worker);
-	dev = &mhi_cntrl->mhi_dev->dev;
-
-	dev_dbg(dev, "Waiting for device to enter PBL from: %s\n",
-		TO_MHI_EXEC_STR(mhi_cntrl->ee));
-
-	ret = wait_event_timeout(mhi_cntrl->state_event,
-				 MHI_IN_PBL(mhi_cntrl->ee) ||
-				 MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state),
-				 msecs_to_jiffies(mhi_cntrl->timeout_ms));
-
-	if (!ret || MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
+	if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
 		dev_err(dev, "Device MHI is not in valid state\n");
 		return;
 	}
diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index 1a93d24efffc..6882206ad80e 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -835,7 +835,6 @@ int mhi_register_controller(struct mhi_controller *mhi_cntrl,
 	spin_lock_init(&mhi_cntrl->wlock);
 	INIT_WORK(&mhi_cntrl->st_worker, mhi_pm_st_worker);
 	INIT_WORK(&mhi_cntrl->syserr_worker, mhi_pm_sys_err_worker);
-	INIT_WORK(&mhi_cntrl->fw_worker, mhi_fw_load_worker);
 	init_waitqueue_head(&mhi_cntrl->state_event);
 
 	mhi_cmd = mhi_cntrl->mhi_cmd;
diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h
index 40c47f918ca3..0965ca3c9632 100644
--- a/drivers/bus/mhi/core/internal.h
+++ b/drivers/bus/mhi/core/internal.h
@@ -627,6 +627,7 @@ int mhi_init_irq_setup(struct mhi_controller *mhi_cntrl);
 void mhi_deinit_free_irq(struct mhi_controller *mhi_cntrl);
 void mhi_rddm_prepare(struct mhi_controller *mhi_cntrl,
 		      struct image_info *img_info);
+void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl);
 int mhi_prepare_channel(struct mhi_controller *mhi_cntrl,
 			struct mhi_chan *mhi_chan);
 int mhi_init_chan_ctxt(struct mhi_controller *mhi_cntrl,
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index dc83d65f7784..6d56441013af 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -528,7 +528,6 @@ static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl,
 	dev_dbg(dev, "Waiting for all pending threads to complete\n");
 	wake_up_all(&mhi_cntrl->state_event);
 	flush_work(&mhi_cntrl->st_worker);
-	flush_work(&mhi_cntrl->fw_worker);
 
 	dev_dbg(dev, "Reset all active channels and remove MHI devices\n");
 	device_for_each_child(mhi_cntrl->cntrl_dev, NULL, mhi_destroy_device);
@@ -643,7 +642,7 @@ void mhi_pm_st_worker(struct work_struct *work)
 				mhi_cntrl->ee = mhi_get_exec_env(mhi_cntrl);
 			write_unlock_irq(&mhi_cntrl->pm_lock);
 			if (MHI_IN_PBL(mhi_cntrl->ee))
-				wake_up_all(&mhi_cntrl->state_event);
+				mhi_fw_load_handler(mhi_cntrl);
 			break;
 		case DEV_ST_TRANSITION_SBL:
 			write_lock_irq(&mhi_cntrl->pm_lock);
@@ -833,9 +832,6 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
 	next_state = MHI_IN_PBL(current_ee) ?
 		DEV_ST_TRANSITION_PBL : DEV_ST_TRANSITION_READY;
 
-	if (next_state == DEV_ST_TRANSITION_PBL)
-		schedule_work(&mhi_cntrl->fw_worker);
-
 	mhi_queue_state_transition(mhi_cntrl, next_state);
 
 	mutex_unlock(&mhi_cntrl->pm_mutex);
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index 3d7c3c26eeb9..a60312927b4d 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -331,7 +331,6 @@ struct mhi_controller_config {
  * @wlock: Lock for protecting device wakeup
  * @mhi_link_info: Device bandwidth info
  * @st_worker: State transition worker
- * @fw_worker: Firmware download worker
  * @syserr_worker: System error worker
  * @state_event: State change event
  * @status_cb: CB function to notify power states of the device (required)
@@ -412,7 +411,6 @@ struct mhi_controller {
 	spinlock_t wlock;
 	struct mhi_link_info mhi_link_info;
 	struct work_struct st_worker;
-	struct work_struct fw_worker;
 	struct work_struct syserr_worker;
 	wait_queue_head_t state_event;
 
-- 
2.26.GIT


  parent reply	other threads:[~2020-05-21 15:26 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-21 15:25 [PATCH 00/14] MHI patches for v5.8 mani
2020-05-21 15:25 ` [PATCH 01/14] bus: mhi: core: Refactor mhi queue APIs mani
2020-05-21 15:25 ` [PATCH 02/14] bus: mhi: core: Cache intmod from mhi event to mhi channel mani
2020-05-21 15:25 ` [PATCH 03/14] bus: mhi: core: Add range check for channel id received in event ring mani
2020-05-21 15:25 ` [PATCH 04/14] bus: mhi: core: Read transfer length from an event properly mani
2020-05-21 15:25 ` mani [this message]
2020-05-21 15:25 ` [PATCH 06/14] bus: mhi: core: Return appropriate error codes for AMSS load failure mani
2020-05-21 15:25 ` [PATCH 07/14] bus: mhi: core: Improve debug logs for loading firmware mani
2020-05-21 15:25 ` [PATCH 08/14] bus: mhi: core: Ensure non-zero session or sequence ID values are used mani
2020-05-21 15:25 ` [PATCH 09/14] bus: mhi: core: Remove the system error worker thread mani
2020-05-21 15:25 ` [PATCH 10/14] bus: mhi: core: Handle disable transitions in state worker mani
2020-05-21 15:25 ` [PATCH 11/14] bus: mhi: core: Skip handling BHI irq if MHI reg access is not allowed mani
2020-05-21 15:25 ` [PATCH 12/14] bus: mhi: core: Do not process SYS_ERROR if RDDM is supported mani
2020-05-21 15:25 ` [PATCH 13/14] bus: mhi: core: Handle write lock properly in mhi_pm_m0_transition mani
2020-05-21 15:25 ` [PATCH 14/14] bus: mhi: core: Handle syserr during power_up mani
2020-05-21 15:29 ` [PATCH 00/14] MHI patches for v5.8 Manivannan Sadhasivam
2020-05-21 16:19   ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200521152540.17335-6-mani@kernel.org \
    --to=mani@kernel.org \
    --cc=bbhatt@codeaurora.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=hemantk@codeaurora.org \
    --cc=jhugo@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.