From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Antoine Tenart <antoine.tenart@bootlin.com>
Cc: davem@davemloft.net, andrew@lunn.ch, f.fainelli@gmail.com,
hkallweit1@gmail.com, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, thomas.petazzoni@bootlin.com,
allan.nielsen@microchip.com
Subject: Re: [PATCH net-next 3/4] net: phy: mscc-miim: improve waiting logic
Date: Tue, 26 May 2020 23:07:34 +0200 [thread overview]
Message-ID: <20200526210734.GI3972@piout.net> (raw)
In-Reply-To: <20200526162256.466885-4-antoine.tenart@bootlin.com>
On 26/05/2020 18:22:55+0200, Antoine Ténart wrote:
> The MSCC MIIM MDIO driver uses a waiting logic to wait for the MDIO bus
> to be ready to accept next commands. It does so by polling the BUSY
> status bit which indicates the MDIO bus has completed all pending
> operations. This can take time, and the controller supports writing the
> next command as soon as there are no pending commands (which happens
> while the MDIO bus is busy completing its current command).
>
> This patch implements this improved logic by adding an helper to poll
> the PENDING status bit, and by adjusting where we should wait for the
> bus to not be busy or to not be pending.
>
> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> ---
> drivers/net/phy/mdio-mscc-miim.c | 15 +++++++++++++--
> 1 file changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/phy/mdio-mscc-miim.c b/drivers/net/phy/mdio-mscc-miim.c
> index 42119f661452..aed9afa1e8f1 100644
> --- a/drivers/net/phy/mdio-mscc-miim.c
> +++ b/drivers/net/phy/mdio-mscc-miim.c
> @@ -16,6 +16,7 @@
> #include <linux/of_mdio.h>
>
> #define MSCC_MIIM_REG_STATUS 0x0
> +#define MSCC_MIIM_STATUS_STAT_PENDING BIT(2)
> #define MSCC_MIIM_STATUS_STAT_BUSY BIT(3)
> #define MSCC_MIIM_REG_CMD 0x8
> #define MSCC_MIIM_CMD_OPR_WRITE BIT(1)
> @@ -47,13 +48,23 @@ static int mscc_miim_wait_ready(struct mii_bus *bus)
> !(val & MSCC_MIIM_STATUS_STAT_BUSY), 50, 10000);
> }
>
> +static int mscc_miim_wait_pending(struct mii_bus *bus)
> +{
> + struct mscc_miim_dev *miim = bus->priv;
> + u32 val;
> +
> + return readl_poll_timeout(miim->regs + MSCC_MIIM_REG_STATUS, val,
> + !(val & MSCC_MIIM_STATUS_STAT_PENDING),
> + 50, 10000);
> +}
> +
> static int mscc_miim_read(struct mii_bus *bus, int mii_id, int regnum)
> {
> struct mscc_miim_dev *miim = bus->priv;
> u32 val;
> int ret;
>
> - ret = mscc_miim_wait_ready(bus);
> + ret = mscc_miim_wait_pending(bus);
> if (ret)
> goto out;
>
> @@ -82,7 +93,7 @@ static int mscc_miim_write(struct mii_bus *bus, int mii_id,
> struct mscc_miim_dev *miim = bus->priv;
> int ret;
>
> - ret = mscc_miim_wait_ready(bus);
> + ret = mscc_miim_wait_pending(bus);
> if (ret < 0)
> goto out;
>
> --
> 2.26.2
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next prev parent reply other threads:[~2020-05-26 21:07 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-26 16:22 [PATCH net-next 0/4] net: phy: mscc-miim: reduce waiting time between MDIO transactions Antoine Tenart
2020-05-26 16:22 ` [PATCH net-next 1/4] net: phy: mscc-miim: use more reasonable delays Antoine Tenart
2020-05-26 21:04 ` Alexandre Belloni
2020-05-26 21:19 ` Florian Fainelli
2020-05-26 16:22 ` [PATCH net-next 2/4] net: phy: mscc-miim: remove redundant timeout check Antoine Tenart
2020-05-26 21:04 ` Alexandre Belloni
2020-05-26 21:19 ` Florian Fainelli
2020-05-26 16:22 ` [PATCH net-next 3/4] net: phy: mscc-miim: improve waiting logic Antoine Tenart
2020-05-26 21:07 ` Alexandre Belloni [this message]
2020-05-26 21:21 ` Florian Fainelli
2020-05-26 16:22 ` [PATCH net-next 4/4] net: phy: mscc-miim: read poll when high resolution timers are disabled Antoine Tenart
2020-05-26 21:22 ` Florian Fainelli
2020-05-26 22:01 ` Andrew Lunn
2020-05-26 22:05 ` Florian Fainelli
2020-05-26 17:01 ` [PATCH net-next 0/4] net: phy: mscc-miim: reduce waiting time between MDIO transactions Andrew Lunn
2020-05-27 7:00 ` Antoine Tenart
2020-05-26 22:34 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200526210734.GI3972@piout.net \
--to=alexandre.belloni@bootlin.com \
--cc=allan.nielsen@microchip.com \
--cc=andrew@lunn.ch \
--cc=antoine.tenart@bootlin.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.