All of lore.kernel.org
 help / color / mirror / Atom feed
From: Florian Fainelli <f.fainelli@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Rob Herring <robh+dt@kernel.org>, Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	bcm-kernel-feedback-list@broadcom.com (maintainer:BROADCOM
	BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE...),
	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Stefan Wahren <stefan.wahren@i2se.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
	linux-gpio@vger.kernel.org (open list:PIN CONTROL SUBSYSTEM),
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-rpi-kernel@lists.infradead.org (moderated list:BROADCOM
	BCM2711/BCM2835 ARM ARCHITECTURE),
	linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM
	BCM2711/BCM2835 ARM ARCHITECTURE)
Subject: [PATCH v2 3/4] pinctrl: bcm2835: Match BCM7211 compatible string
Date: Fri, 29 May 2020 12:15:21 -0700	[thread overview]
Message-ID: <20200529191522.27938-4-f.fainelli@gmail.com> (raw)
In-Reply-To: <20200529191522.27938-1-f.fainelli@gmail.com>

The BCM7211 SoC uses the same pinconf_ops as the ones defined for the
BCM2711 SoC, match the compatible string and use the correct set of
options.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/pinctrl/bcm/pinctrl-bcm2835.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index 06bd2b70af3c..1b00d93aa66e 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -1137,6 +1137,10 @@ static const struct of_device_id bcm2835_pinctrl_match[] = {
 		.compatible = "brcm,bcm2711-gpio",
 		.data = &bcm2711_plat_data,
 	},
+	{
+		.compatible = "brcm,bcm7211-gpio",
+		.data = &bcm2711_plat_data,
+	},
 	{}
 };
 
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <f.fainelli@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Stefan Wahren <stefan.wahren@i2se.com>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Scott Branden <sbranden@broadcom.com>,
	Ray Jui <rjui@broadcom.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
	"open list:PIN CONTROL SUBSYSTEM" <linux-gpio@vger.kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	"maintainer:BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE..."
	<bcm-kernel-feedback-list@broadcom.com>,
	"moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE"
	<linux-rpi-kernel@lists.infradead.org>,
	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	"moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE"
	<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v2 3/4] pinctrl: bcm2835: Match BCM7211 compatible string
Date: Fri, 29 May 2020 12:15:21 -0700	[thread overview]
Message-ID: <20200529191522.27938-4-f.fainelli@gmail.com> (raw)
In-Reply-To: <20200529191522.27938-1-f.fainelli@gmail.com>

The BCM7211 SoC uses the same pinconf_ops as the ones defined for the
BCM2711 SoC, match the compatible string and use the correct set of
options.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/pinctrl/bcm/pinctrl-bcm2835.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index 06bd2b70af3c..1b00d93aa66e 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -1137,6 +1137,10 @@ static const struct of_device_id bcm2835_pinctrl_match[] = {
 		.compatible = "brcm,bcm2711-gpio",
 		.data = &bcm2711_plat_data,
 	},
+	{
+		.compatible = "brcm,bcm7211-gpio",
+		.data = &bcm2711_plat_data,
+	},
 	{}
 };
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-05-29 19:17 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-29 19:15 [PATCH v2 0/4] pinctrl: bcm2835: Support for wake-up interrupts Florian Fainelli
2020-05-29 19:15 ` Florian Fainelli
2020-05-29 19:15 ` [PATCH v2 1/4] dt-bindings: pinctrl: Document 7211 compatible for brcm,bcm2835-gpio.txt Florian Fainelli
2020-05-29 19:15   ` [PATCH v2 1/4] dt-bindings: pinctrl: Document 7211 compatible for brcm, bcm2835-gpio.txt Florian Fainelli
2020-05-29 21:45   ` Rob Herring
2020-05-29 21:45     ` Rob Herring
2020-05-29 19:15 ` [PATCH v2 2/4] dt-bindings: pinctrl: Document optional BCM7211 wake-up interrupts Florian Fainelli
2020-05-29 19:15   ` Florian Fainelli
2020-05-29 22:22   ` Rob Herring
2020-05-29 22:22     ` Rob Herring
2020-05-29 19:15 ` Florian Fainelli [this message]
2020-05-29 19:15   ` [PATCH v2 3/4] pinctrl: bcm2835: Match BCM7211 compatible string Florian Fainelli
2020-05-29 19:15 ` [PATCH v2 4/4] pinctrl: bcm2835: Add support for wake-up interrupts Florian Fainelli
2020-05-29 19:15   ` Florian Fainelli
2020-05-30  7:49   ` Stefan Wahren
2020-05-30  7:49     ` Stefan Wahren
2020-05-30 21:19     ` Florian Fainelli
2020-05-30 21:19       ` Florian Fainelli
2020-05-30 23:30       ` Stefan Wahren
2020-05-30 23:30         ` Stefan Wahren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200529191522.27938-4-f.fainelli@gmail.com \
    --to=f.fainelli@gmail.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=matti.vaittinen@fi.rohmeurope.com \
    --cc=nsaenzjulienne@suse.de \
    --cc=rjui@broadcom.com \
    --cc=robh+dt@kernel.org \
    --cc=sbranden@broadcom.com \
    --cc=stefan.wahren@i2se.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.