From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: davem@davemloft.net, sparclinux@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: Fail to build tftpboot.img
Date: Fri, 05 Jun 2020 11:05:35 +0000 [thread overview]
Message-ID: <20200605110535.GA9025@Red> (raw)
Hello
For reinstalling an old SPARC machine , I need a netboot image.
I tried to create it via make tftpboot.img but got:
BUILD: sparc to /home/compile/crossbuild/next/sparc/sparc64/defconfig
make[1]: Entering directory '/usr/src/crossbuild/next/sparc/sparc64/defconfig'
GEN Makefile
scripts/kconfig/conf --syncconfig Kconfig
GEN Makefile
CALL /linux-next/scripts/atomic/check-atomics.sh
CALL /linux-next/scripts/checksyscalls.sh
<stdin>:1511:2: warning: #warning syscall clone3 not implemented [-Wcpp]
CHK include/generated/compile.h
GZIP kernel/config_data.gz
CC kernel/configs.o
AR kernel/built-in.a
GEN .version
CHK include/generated/compile.h
UPD include/generated/compile.h
CC init/version.o
AR init/built-in.a
LD vmlinux.o
MODPOST vmlinux.symvers
WARNING: modpost: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned.
MODINFO modules.builtin.modinfo
GEN modules.builtin
LD .tmp_vmlinux.kallsyms1
KSYM .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
KSYM .tmp_vmlinux.kallsyms2.o
LD vmlinux
SYSMAP System.map
MODPOST Module.symvers
STRIP arch/sparc/boot/image
kernel: arch/sparc/boot/image is ready
ELFTOAOUT arch/sparc/boot/tftpboot.img
PT 0 Entry: Loadable to 0x400000[0x5288d0] from 0x0[0x4ca694] align 0x100000
PT 1 Entry: Note
PT 2 Entry: unknown
PIGGY arch/sparc/boot/tftpboot.img
lseek: Invalid argument
make[2]: *** [/linux-next/arch/sparc/boot/Makefile:72: arch/sparc/boot/tftpboot.img] Error 1
make[2]: *** Deleting file 'arch/sparc/boot/tftpboot.img'
make[1]: *** [arch/sparc/Makefile:76: tftpboot.img] Error 2
make[1]: Leaving directory '/usr/src/crossbuild/next/sparc/sparc64/defconfig'
make: *** [Makefile:185: __sub-make] Error 2
I got this result on both linux-next and 5.6.15
I have straced the process:
22495 openat(AT_FDCWD, "arch/sparc/boot/tftpboot.img", O_RDWR) = 3
22495 read(3, "\1\3\1\7\0\0\0\0\0Lf\224\0\0\0\0\0\0\0\0\0\0\0\0\0\5\342<\0\0\0\0"..., 512) = 512
22495 lseek(3, 0, SEEK_SET) = 0
22495 read(3, "\1\3\1\7\0\0\0\0\0Lf\224\0\0\0\0\0\0\0\0\0\0\0\0\0\5\342<\0\0\0\0"..., 1024) = 1024
22495 lseek(3, -480, SEEK_SET) = -1 EINVAL (Argument invalide)
22495 dup(2) = 4
22495 fcntl(4, F_GETFL) = 0x402 (flags O_RDWR|O_APPEND)
22495 fstat(4, {st_mode=S_IFCHR|0620, st_rdev=makedev(0x88, 0x1a), ...}) = 0
22495 write(4, "lseek: Invalid argument\n", 24) = 24
22495 close(4) = 0
Regards
WARNING: multiple messages have this Message-ID (diff)
From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: davem@davemloft.net, sparclinux@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: Fail to build tftpboot.img
Date: Fri, 5 Jun 2020 13:05:35 +0200 [thread overview]
Message-ID: <20200605110535.GA9025@Red> (raw)
Hello
For reinstalling an old SPARC machine , I need a netboot image.
I tried to create it via make tftpboot.img but got:
BUILD: sparc to /home/compile/crossbuild/next/sparc/sparc64/defconfig
make[1]: Entering directory '/usr/src/crossbuild/next/sparc/sparc64/defconfig'
GEN Makefile
scripts/kconfig/conf --syncconfig Kconfig
GEN Makefile
CALL /linux-next/scripts/atomic/check-atomics.sh
CALL /linux-next/scripts/checksyscalls.sh
<stdin>:1511:2: warning: #warning syscall clone3 not implemented [-Wcpp]
CHK include/generated/compile.h
GZIP kernel/config_data.gz
CC kernel/configs.o
AR kernel/built-in.a
GEN .version
CHK include/generated/compile.h
UPD include/generated/compile.h
CC init/version.o
AR init/built-in.a
LD vmlinux.o
MODPOST vmlinux.symvers
WARNING: modpost: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned.
MODINFO modules.builtin.modinfo
GEN modules.builtin
LD .tmp_vmlinux.kallsyms1
KSYM .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
KSYM .tmp_vmlinux.kallsyms2.o
LD vmlinux
SYSMAP System.map
MODPOST Module.symvers
STRIP arch/sparc/boot/image
kernel: arch/sparc/boot/image is ready
ELFTOAOUT arch/sparc/boot/tftpboot.img
PT 0 Entry: Loadable to 0x400000[0x5288d0] from 0x0[0x4ca694] align 0x100000
PT 1 Entry: Note
PT 2 Entry: unknown
PIGGY arch/sparc/boot/tftpboot.img
lseek: Invalid argument
make[2]: *** [/linux-next/arch/sparc/boot/Makefile:72: arch/sparc/boot/tftpboot.img] Error 1
make[2]: *** Deleting file 'arch/sparc/boot/tftpboot.img'
make[1]: *** [arch/sparc/Makefile:76: tftpboot.img] Error 2
make[1]: Leaving directory '/usr/src/crossbuild/next/sparc/sparc64/defconfig'
make: *** [Makefile:185: __sub-make] Error 2
I got this result on both linux-next and 5.6.15
I have straced the process:
22495 openat(AT_FDCWD, "arch/sparc/boot/tftpboot.img", O_RDWR) = 3
22495 read(3, "\1\3\1\7\0\0\0\0\0Lf\224\0\0\0\0\0\0\0\0\0\0\0\0\0\5\342<\0\0\0\0"..., 512) = 512
22495 lseek(3, 0, SEEK_SET) = 0
22495 read(3, "\1\3\1\7\0\0\0\0\0Lf\224\0\0\0\0\0\0\0\0\0\0\0\0\0\5\342<\0\0\0\0"..., 1024) = 1024
22495 lseek(3, -480, SEEK_SET) = -1 EINVAL (Argument invalide)
22495 dup(2) = 4
22495 fcntl(4, F_GETFL) = 0x402 (flags O_RDWR|O_APPEND)
22495 fstat(4, {st_mode=S_IFCHR|0620, st_rdev=makedev(0x88, 0x1a), ...}) = 0
22495 write(4, "lseek: Invalid argument\n", 24) = 24
22495 close(4) = 0
Regards
next reply other threads:[~2020-06-05 11:05 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-05 11:05 Corentin Labbe [this message]
2020-06-05 11:05 ` Fail to build tftpboot.img Corentin Labbe
2020-06-09 15:41 ` Corentin Labbe
2020-06-09 15:41 ` Corentin Labbe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200605110535.GA9025@Red \
--to=clabbe.montjoie@gmail.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=sparclinux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.