From: Sudeep Holla <sudeep.holla@arm.com>
To: Cristian Marussi <cristian.marussi@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, james.quinlan@broadcom.com,
Jonathan.Cameron@Huawei.com, dave.martin@arm.com,
lukasz.luba@arm.com
Subject: Re: [PATCH v8 1/9] firmware: arm_scmi: Add notification protocol-registration
Date: Mon, 8 Jun 2020 18:02:58 +0100 [thread overview]
Message-ID: <20200608170258.GB13622@bogus> (raw)
In-Reply-To: <20200520081118.54897-2-cristian.marussi@arm.com>
On Wed, May 20, 2020 at 09:11:10AM +0100, Cristian Marussi wrote:
> Add core SCMI Notifications protocol-registration support: allow protocols
> to register their own set of supported events, during their initialization
> phase. Notification core can track multiple platform instances by their
> handles.
>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
> ---
> drivers/firmware/arm_scmi/Makefile | 2 +-
> drivers/firmware/arm_scmi/common.h | 4 +
> drivers/firmware/arm_scmi/notify.c | 435 +++++++++++++++++++++++++++++
> drivers/firmware/arm_scmi/notify.h | 56 ++++
> include/linux/scmi_protocol.h | 3 +
> 5 files changed, 499 insertions(+), 1 deletion(-)
> create mode 100644 drivers/firmware/arm_scmi/notify.c
> create mode 100644 drivers/firmware/arm_scmi/notify.h
>
> diff --git a/drivers/firmware/arm_scmi/notify.c b/drivers/firmware/arm_scmi/notify.c
> new file mode 100644
> index 000000000000..8b620fc7df50
> --- /dev/null
> +++ b/drivers/firmware/arm_scmi/notify.c
> @@ -0,0 +1,435 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * System Control and Management Interface (SCMI) Notification support
> + *
> + * Copyright (C) 2020 ARM Ltd.
> + */
> +/**
> + * DOC: Theory of operation
> + *
> + * SCMI Protocol specification allows the platform to signal events to
> + * interested agents via notification messages: this is an implementation
> + * of the dispatch and delivery of such notifications to the interested users
> + * inside the Linux kernel.
> + *
> + * An SCMI Notification core instance is initialized for each active platform
> + * instance identified by the means of the usual &struct scmi_handle.
> + *
> + * Each SCMI Protocol implementation, during its initialization, registers with
> + * this core its set of supported events using scmi_register_protocol_events():
> + * all the needed descriptors are stored in the &struct registered_protocols and
> + * &struct registered_events arrays.
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/bug.h>
> +#include <linux/compiler.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/kernel.h>
> +#include <linux/kfifo.h>
> +#include <linux/mutex.h>
> +#include <linux/refcount.h>
> +#include <linux/scmi_protocol.h>
> +#include <linux/slab.h>
> +#include <linux/types.h>
> +
> +#include "notify.h"
> +
> +#define SCMI_MAX_PROTO 256
[nit] Space after define instead of tab.
> +#define SCMI_ALL_SRC_IDS 0xffffUL
Once you move {PROTO,EVT,SRC}_ID_MASK here, you can just {re-}use SRC_ID_MASK
> +/*
> + * Builds an unsigned 32bit key from the given input tuple to be used
> + * as a key in hashtables.
> + */
> +#define MAKE_HASH_KEY(p, e, s) \
> + ((u32)(((p) << 24) | ((e) << 16) | ((s) & SCMI_ALL_SRC_IDS)))
> +
You can use {PROTO,EVT,SRC}_ID_MASK here and FIELD_PREP in the above
macro.
> +#define MAKE_ALL_SRCS_KEY(p, e) \
> + MAKE_HASH_KEY((p), (e), SCMI_ALL_SRC_IDS)
> +
> +struct scmi_registered_protocol_events_desc;
> +
Just a thought here: can we rename all protocol_event* as just event*.
The term protocol is kind of implicit and makes the names too long.
I feel some are really too long :). Similar if you think protocol
is implicit elsewhere, drop it.
> +/**
> + * struct scmi_notify_instance - Represents an instance of the notification
> + * core
> + * @gid: GroupID used for devres
> + * @handle: A reference to the platform instance
> + * @registered_protocols: A statically allocated array containing pointers to
> + * all the registered protocol-level specific information
> + * related to events' handling
> + *
> + * Each platform instance, represented by a handle, has its own instance of
> + * the notification subsystem represented by this structure.
> + */
> +struct scmi_notify_instance {
> + void *gid;
> + struct scmi_handle *handle;
> + struct scmi_registered_protocol_events_desc **registered_protocols;
> +};
> +
> +/**
> + * struct events_queue - Describes a queue and its associated worker
> + * @sz: Size in bytes of the related kfifo
> + * @kfifo: A dedicated Kernel kfifo descriptor
> + *
> + * Each protocol has its own dedicated events_queue descriptor.
> + */
> +struct events_queue {
> + size_t sz;
> + struct kfifo kfifo;
> +};
> +
[nit] Add tabs only for alignment, just to keep it uniform throughout.
> +/**
> + * struct scmi_event_header - A utility header
> + * @timestamp: The timestamp, in nanoseconds (boottime), which was associated
> + * to this event as soon as it entered the SCMI RX ISR
> + * @evt_id: Event ID (corresponds to the Event MsgID for this Protocol)
> + * @payld_sz: Effective size of the embedded message payload which follows
> + * @payld: A reference to the embedded event payload
> + *
> + * This header is prepended to each received event message payload before
> + * queueing it on the related &struct events_queue.
> + */
> +struct scmi_event_header {
> + u64 timestamp;
> + u8 evt_id;
> + size_t payld_sz;
> + u8 payld[];
> +} __packed;
> +
Is this directly read from the shmem ? Trying to understand need for
__packed.
> +struct scmi_registered_event;
> +
> +/**
> + * struct scmi_registered_protocol_events_desc - Protocol Specific information
> + * @id: Protocol ID
> + * @ops: Protocol specific and event-related operations
> + * @equeue: The embedded per-protocol events_queue
> + * @ni: A reference to the initialized instance descriptor
> + * @eh: A reference to pre-allocated buffer to be used as a scratch area by the
> + * deferred worker when fetching data from the kfifo
> + * @eh_sz: Size of the pre-allocated buffer @eh
> + * @in_flight: A reference to an in flight &struct scmi_registered_event
> + * @num_events: Number of events in @registered_events
> + * @registered_events: A dynamically allocated array holding all the registered
> + * events' descriptors, whose fixed-size is determined at
> + * compile time.
> + *
> + * All protocols that register at least one event have their protocol-specific
> + * information stored here, together with the embedded allocated events_queue.
> + * These descriptors are stored in the @registered_protocols array at protocol
> + * registration time.
> + *
> + * Once these descriptors are successfully registered, they are NEVER again
> + * removed or modified since protocols do not unregister ever, so that, once
> + * we safely grab a NON-NULL reference from the array we can keep it and use it.
> + */
> +struct scmi_registered_protocol_events_desc {
> + u8 id;
> + const struct scmi_protocol_event_ops *ops;
> + struct events_queue equeue;
> + struct scmi_notify_instance *ni;
> + struct scmi_event_header *eh;
> + size_t eh_sz;
> + void *in_flight;
> + int num_events;
> + struct scmi_registered_event **registered_events;
> +};
> +
> +/**
> + * struct scmi_registered_event - Event Specific Information
> + * @proto: A reference to the associated protocol descriptor
> + * @evt: A reference to the associated event descriptor (as provided at
> + * registration time)
> + * @report: A pre-allocated buffer used by the deferred worker to fill a
> + * customized event report
> + * @num_sources: The number of possible sources for this event as stated at
> + * events' registration time
> + * @sources: A reference to a dynamically allocated array used to refcount the
> + * events' enable requests for all the existing sources
> + * @sources_mtx: A mutex to serialize the access to @sources
> + *
> + * All registered events are represented by one of these structures that are
> + * stored in the @registered_events array at protocol registration time.
> + *
> + * Once these descriptors are successfully registered, they are NEVER again
> + * removed or modified since protocols do not unregister ever, so that once we
> + * safely grab a NON-NULL reference from the table we can keep it and use it.
> + */
> +struct scmi_registered_event {
> + struct scmi_registered_protocol_events_desc *proto;
> + const struct scmi_event *evt;
> + void *report;
> + u32 num_sources;
> + refcount_t *sources;
> + struct mutex sources_mtx;
> +};
> +
> +/**
> + * scmi_kfifo_free() - Devres action helper to free the kfifo
> + * @kfifo: The kfifo to free
> + */
> +static void scmi_kfifo_free(void *kfifo)
> +{
> + kfifo_free((struct kfifo *)kfifo);
> +}
> +
> +/**
> + * scmi_initialize_events_queue() - Allocate/Initialize a kfifo buffer
> + * @ni: A reference to the notification instance to use
> + * @equeue: The events_queue to initialize
> + * @sz: Size of the kfifo buffer to allocate
> + *
> + * Allocate a buffer for the kfifo and initialize it.
> + *
> + * Return: 0 on Success
> + */
> +static int scmi_initialize_events_queue(struct scmi_notify_instance *ni,
> + struct events_queue *equeue, size_t sz)
> +{
> + if (kfifo_alloc(&equeue->kfifo, sz, GFP_KERNEL))
> + return -ENOMEM;
> + /* Size could have been roundup to power-of-two */
> + equeue->sz = kfifo_size(&equeue->kfifo);
> +
> + return devm_add_action_or_reset(ni->handle->dev, scmi_kfifo_free,
> + &equeue->kfifo);
> +}
> +
> +/**
> + * scmi_allocate_registered_protocol_desc() - Allocate a registered protocol
> + * events' descriptor
> + * @ni: A reference to the &struct scmi_notify_instance notification instance
> + * to use
> + * @proto_id: Protocol ID
> + * @queue_sz: Size of the associated queue to allocate
> + * @eh_sz: Size of the event header scratch area to pre-allocate
> + * @num_events: Number of events to support (size of @registered_events)
> + * @ops: Pointer to a struct holding references to protocol specific helpers
> + * needed during events handling
> + *
> + * It is supposed to be called only once for each protocol at protocol
> + * initialization time, so it warns if the requested protocol is found already
> + * registered.
> + *
> + * Return: The allocated and registered descriptor on Success
> + */
> +static struct scmi_registered_protocol_events_desc *
> +scmi_allocate_registered_protocol_desc(struct scmi_notify_instance *ni,
> + u8 proto_id, size_t queue_sz,
> + size_t eh_sz, int num_events,
> + const struct scmi_protocol_event_ops *ops)
> +{
> + int ret;
> + struct scmi_registered_protocol_events_desc *pd;
> +
> + /* Ensure protocols are up to date */
> + smp_rmb();
> + if (ni->registered_protocols[proto_id]) {
> + WARN_ON(1);
Can't this be if (WARN_ON(ni->registered_protocols[proto_id])) ?
> + return ERR_PTR(-EINVAL);
> + }
> +
> + pd = devm_kzalloc(ni->handle->dev, sizeof(*pd), GFP_KERNEL);
> + if (!pd)
> + return ERR_PTR(-ENOMEM);
> + pd->id = proto_id;
> + pd->ops = ops;
> + pd->ni = ni;
> +
> + ret = scmi_initialize_events_queue(ni, &pd->equeue, queue_sz);
> + if (ret)
> + return ERR_PTR(ret);
> +
> + pd->eh = devm_kzalloc(ni->handle->dev, eh_sz, GFP_KERNEL);
> + if (!pd->eh)
> + return ERR_PTR(-ENOMEM);
> + pd->eh_sz = eh_sz;
> +
> + pd->registered_events = devm_kcalloc(ni->handle->dev, num_events,
> + sizeof(char *), GFP_KERNEL);
> + if (!pd->registered_events)
> + return ERR_PTR(-ENOMEM);
> + pd->num_events = num_events;
> +
> + return pd;
> +}
> +
> +/**
> + * scmi_register_protocol_events() - Register Protocol Events with the core
> + * @handle: The handle identifying the platform instance against which the
> + * the protocol's events are registered
> + * @proto_id: Protocol ID
> + * @queue_sz: Size in bytes of the associated queue to be allocated
> + * @ops: Protocol specific event-related operations
> + * @evt: Event descriptor array
> + * @num_events: Number of events in @evt array
> + * @num_sources: Number of possible sources for this protocol on this
> + * platform.
> + *
> + * Used by SCMI Protocols initialization code to register with the notification
> + * core the list of supported events and their descriptors: takes care to
> + * pre-allocate and store all needed descriptors, scratch buffers and event
> + * queues.
> + *
> + * Return: 0 on Success
> + */
> +int scmi_register_protocol_events(const struct scmi_handle *handle,
> + u8 proto_id, size_t queue_sz,
> + const struct scmi_protocol_event_ops *ops,
> + const struct scmi_event *evt, int num_events,
> + int num_sources)
> +{
> + int i;
> + size_t payld_sz = 0;
> + struct scmi_registered_protocol_events_desc *pd;
> + struct scmi_notify_instance *ni;
> +
> + if (!ops || !evt || proto_id >= SCMI_MAX_PROTO)
> + return -EINVAL;
> +
> + /* Ensure notify_priv is updated */
> + smp_rmb();
> + if (unlikely(!handle->notify_priv))
> + return -ENOMEM;
> + ni = handle->notify_priv;
> +
> + /* Attach to the notification main devres group */
> + if (!devres_open_group(ni->handle->dev, ni->gid, GFP_KERNEL))
> + return -ENOMEM;
> +
> + for (i = 0; i < num_events; i++)
> + payld_sz = max_t(size_t, payld_sz, evt[i].max_payld_sz);
> + pd = scmi_allocate_registered_protocol_desc(ni, proto_id, queue_sz,
> + sizeof(struct scmi_event_header) + payld_sz,
> + num_events, ops);
> + if (IS_ERR(pd))
> + goto err;
> +
> + for (i = 0; i < num_events; i++, evt++) {
> + struct scmi_registered_event *r_evt;
> +
> + r_evt = devm_kzalloc(ni->handle->dev, sizeof(*r_evt),
> + GFP_KERNEL);
> + if (!r_evt)
> + goto err;
> + r_evt->proto = pd;
> + r_evt->evt = evt;
> +
> + r_evt->sources = devm_kcalloc(ni->handle->dev, num_sources,
> + sizeof(refcount_t), GFP_KERNEL);
> + if (!r_evt->sources)
> + goto err;
> + r_evt->num_sources = num_sources;
> + mutex_init(&r_evt->sources_mtx);
> +
> + r_evt->report = devm_kzalloc(ni->handle->dev,
> + evt->max_report_sz, GFP_KERNEL);
> + if (!r_evt->report)
> + goto err;
> +
> + pd->registered_events[i] = r_evt;
> + /* Ensure events are updated */
> + smp_wmb();
> + pr_info("SCMI Notifications: registered event - %X\n",
> + MAKE_ALL_SRCS_KEY(r_evt->proto->id, r_evt->evt->id));
> + }
> +
> + /* Register protocol and events...it will never be removed */
> + ni->registered_protocols[proto_id] = pd;
> + /* Ensure protocols are updated */
> + smp_wmb();
> +
> + devres_close_group(ni->handle->dev, ni->gid);
> +
> + return 0;
> +
> +err:
> + pr_warn("SCMI Notifications - Proto:%X - Registration Failed !\n",
> + proto_id);
> + /* A failing protocol registration does not trigger full failure */
> + devres_close_group(ni->handle->dev, ni->gid);
> +
> + return -ENOMEM;
> +}
> +
> +/**
> + * scmi_notification_init() - Initializes Notification Core Support
> + * @handle: The handle identifying the platform instance to initialize
> + *
> + * This function lays out all the basic resources needed by the notification
> + * core instance identified by the provided handle: once done, all of the
> + * SCMI Protocols can register their events with the core during their own
> + * initializations.
> + *
> + * Note that failing to initialize the core notifications support does not
> + * cause the whole SCMI Protocols stack to fail its initialization.
> + *
> + * SCMI Notification Initialization happens in 2 steps:
> + * * initialization: basic common allocations (this function)
> + * * registration: protocols asynchronously come into life and registers their
> + * own supported list of events with the core; this causes
> + * further per-protocol allocations
> + *
> + * Any user's callback registration attempt, referring a still not registered
> + * event, will be registered as pending and finalized later (if possible)
> + * by scmi_protocols_late_init() work.
> + * This allows for lazy initialization of SCMI Protocols due to late (or
> + * missing) SCMI drivers' modules loading.
> + *
> + * Return: 0 on Success
> + */
> +int scmi_notification_init(struct scmi_handle *handle)
> +{
> + void *gid;
> + struct scmi_notify_instance *ni;
> +
> + gid = devres_open_group(handle->dev, NULL, GFP_KERNEL);
> + if (!gid)
> + return -ENOMEM;
> +
> + ni = devm_kzalloc(handle->dev, sizeof(*ni), GFP_KERNEL);
> + if (!ni)
> + goto err;
> +
> + ni->gid = gid;
> + ni->handle = handle;
> +
> + ni->registered_protocols = devm_kcalloc(handle->dev, SCMI_MAX_PROTO,
> + sizeof(char *), GFP_KERNEL);
May not be too expensive, do we have to allocate for all 256 possible
protocols ? Will it help if we share list of implemented protocols.
I know this may get complex once we add support for registering protocols
later, but do we need it now ?
> + if (!ni->registered_protocols)
> + goto err;
> +
> + handle->notify_priv = ni;
> + /* Ensure handle is up to date */
> + smp_wmb();
> +
> + pr_info("SCMI Notifications Core Enabled.\n");
> +
> + devres_close_group(handle->dev, ni->gid);
> +
> + return 0;
> +
> +err:
> + pr_warn("SCMI Notifications - Initialization Failed.\n");
You have defined pr_fmt, do you still need "SCMI Notifications" for
all the logging(err/warn/info) everywhere in the file. Making use of
it will help you trim the messages without loosing it in the log. Update
pr_fmt if needed.
> + devres_release_group(handle->dev, NULL);
> + return -ENOMEM;
> +}
> +
> +/**
> + * scmi_notification_exit() - Shutdown and clean Notification core
> + * @handle: The handle identifying the platform instance to shutdown
> + */
> +void scmi_notification_exit(struct scmi_handle *handle)
> +{
> + struct scmi_notify_instance *ni;
> +
> + /* Ensure notify_priv is updated */
> + smp_rmb();
> + if (unlikely(!handle->notify_priv))
> + return;
> + ni = handle->notify_priv;
> +
> + devres_release_group(ni->handle->dev, ni->gid);
> +}
> diff --git a/drivers/firmware/arm_scmi/notify.h b/drivers/firmware/arm_scmi/notify.h
> new file mode 100644
> index 000000000000..54094aaf812a
> --- /dev/null
> +++ b/drivers/firmware/arm_scmi/notify.h
> @@ -0,0 +1,56 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * System Control and Management Interface (SCMI) Message Protocol
> + * notification header file containing some definitions, structures
> + * and function prototypes related to SCMI Notification handling.
> + *
> + * Copyright (C) 2020 ARM Ltd.
> + */
> +#ifndef _SCMI_NOTIFY_H
> +#define _SCMI_NOTIFY_H
> +
> +#include <linux/device.h>
> +#include <linux/types.h>
> +
> +/**
> + * struct scmi_event - Describes an event to be supported
> + * @id: Event ID
> + * @max_payld_sz: Max possible size for the payload of a notif msg of this kind
> + * @max_report_sz: Max possible size for the report of a notif msg of this kind
:s/notif msg of this kind/notification message/
--
Regards,
Sudeep
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Sudeep Holla <sudeep.holla@arm.com>
To: Cristian Marussi <cristian.marussi@arm.com>
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, lukasz.luba@arm.com,
james.quinlan@broadcom.com, Jonathan.Cameron@Huawei.com,
dave.martin@arm.com, Sudeep Holla <sudeep.holla@arm.com>
Subject: Re: [PATCH v8 1/9] firmware: arm_scmi: Add notification protocol-registration
Date: Mon, 8 Jun 2020 18:02:58 +0100 [thread overview]
Message-ID: <20200608170258.GB13622@bogus> (raw)
In-Reply-To: <20200520081118.54897-2-cristian.marussi@arm.com>
On Wed, May 20, 2020 at 09:11:10AM +0100, Cristian Marussi wrote:
> Add core SCMI Notifications protocol-registration support: allow protocols
> to register their own set of supported events, during their initialization
> phase. Notification core can track multiple platform instances by their
> handles.
>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
> ---
> drivers/firmware/arm_scmi/Makefile | 2 +-
> drivers/firmware/arm_scmi/common.h | 4 +
> drivers/firmware/arm_scmi/notify.c | 435 +++++++++++++++++++++++++++++
> drivers/firmware/arm_scmi/notify.h | 56 ++++
> include/linux/scmi_protocol.h | 3 +
> 5 files changed, 499 insertions(+), 1 deletion(-)
> create mode 100644 drivers/firmware/arm_scmi/notify.c
> create mode 100644 drivers/firmware/arm_scmi/notify.h
>
> diff --git a/drivers/firmware/arm_scmi/notify.c b/drivers/firmware/arm_scmi/notify.c
> new file mode 100644
> index 000000000000..8b620fc7df50
> --- /dev/null
> +++ b/drivers/firmware/arm_scmi/notify.c
> @@ -0,0 +1,435 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * System Control and Management Interface (SCMI) Notification support
> + *
> + * Copyright (C) 2020 ARM Ltd.
> + */
> +/**
> + * DOC: Theory of operation
> + *
> + * SCMI Protocol specification allows the platform to signal events to
> + * interested agents via notification messages: this is an implementation
> + * of the dispatch and delivery of such notifications to the interested users
> + * inside the Linux kernel.
> + *
> + * An SCMI Notification core instance is initialized for each active platform
> + * instance identified by the means of the usual &struct scmi_handle.
> + *
> + * Each SCMI Protocol implementation, during its initialization, registers with
> + * this core its set of supported events using scmi_register_protocol_events():
> + * all the needed descriptors are stored in the &struct registered_protocols and
> + * &struct registered_events arrays.
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/bug.h>
> +#include <linux/compiler.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/kernel.h>
> +#include <linux/kfifo.h>
> +#include <linux/mutex.h>
> +#include <linux/refcount.h>
> +#include <linux/scmi_protocol.h>
> +#include <linux/slab.h>
> +#include <linux/types.h>
> +
> +#include "notify.h"
> +
> +#define SCMI_MAX_PROTO 256
[nit] Space after define instead of tab.
> +#define SCMI_ALL_SRC_IDS 0xffffUL
Once you move {PROTO,EVT,SRC}_ID_MASK here, you can just {re-}use SRC_ID_MASK
> +/*
> + * Builds an unsigned 32bit key from the given input tuple to be used
> + * as a key in hashtables.
> + */
> +#define MAKE_HASH_KEY(p, e, s) \
> + ((u32)(((p) << 24) | ((e) << 16) | ((s) & SCMI_ALL_SRC_IDS)))
> +
You can use {PROTO,EVT,SRC}_ID_MASK here and FIELD_PREP in the above
macro.
> +#define MAKE_ALL_SRCS_KEY(p, e) \
> + MAKE_HASH_KEY((p), (e), SCMI_ALL_SRC_IDS)
> +
> +struct scmi_registered_protocol_events_desc;
> +
Just a thought here: can we rename all protocol_event* as just event*.
The term protocol is kind of implicit and makes the names too long.
I feel some are really too long :). Similar if you think protocol
is implicit elsewhere, drop it.
> +/**
> + * struct scmi_notify_instance - Represents an instance of the notification
> + * core
> + * @gid: GroupID used for devres
> + * @handle: A reference to the platform instance
> + * @registered_protocols: A statically allocated array containing pointers to
> + * all the registered protocol-level specific information
> + * related to events' handling
> + *
> + * Each platform instance, represented by a handle, has its own instance of
> + * the notification subsystem represented by this structure.
> + */
> +struct scmi_notify_instance {
> + void *gid;
> + struct scmi_handle *handle;
> + struct scmi_registered_protocol_events_desc **registered_protocols;
> +};
> +
> +/**
> + * struct events_queue - Describes a queue and its associated worker
> + * @sz: Size in bytes of the related kfifo
> + * @kfifo: A dedicated Kernel kfifo descriptor
> + *
> + * Each protocol has its own dedicated events_queue descriptor.
> + */
> +struct events_queue {
> + size_t sz;
> + struct kfifo kfifo;
> +};
> +
[nit] Add tabs only for alignment, just to keep it uniform throughout.
> +/**
> + * struct scmi_event_header - A utility header
> + * @timestamp: The timestamp, in nanoseconds (boottime), which was associated
> + * to this event as soon as it entered the SCMI RX ISR
> + * @evt_id: Event ID (corresponds to the Event MsgID for this Protocol)
> + * @payld_sz: Effective size of the embedded message payload which follows
> + * @payld: A reference to the embedded event payload
> + *
> + * This header is prepended to each received event message payload before
> + * queueing it on the related &struct events_queue.
> + */
> +struct scmi_event_header {
> + u64 timestamp;
> + u8 evt_id;
> + size_t payld_sz;
> + u8 payld[];
> +} __packed;
> +
Is this directly read from the shmem ? Trying to understand need for
__packed.
> +struct scmi_registered_event;
> +
> +/**
> + * struct scmi_registered_protocol_events_desc - Protocol Specific information
> + * @id: Protocol ID
> + * @ops: Protocol specific and event-related operations
> + * @equeue: The embedded per-protocol events_queue
> + * @ni: A reference to the initialized instance descriptor
> + * @eh: A reference to pre-allocated buffer to be used as a scratch area by the
> + * deferred worker when fetching data from the kfifo
> + * @eh_sz: Size of the pre-allocated buffer @eh
> + * @in_flight: A reference to an in flight &struct scmi_registered_event
> + * @num_events: Number of events in @registered_events
> + * @registered_events: A dynamically allocated array holding all the registered
> + * events' descriptors, whose fixed-size is determined at
> + * compile time.
> + *
> + * All protocols that register at least one event have their protocol-specific
> + * information stored here, together with the embedded allocated events_queue.
> + * These descriptors are stored in the @registered_protocols array at protocol
> + * registration time.
> + *
> + * Once these descriptors are successfully registered, they are NEVER again
> + * removed or modified since protocols do not unregister ever, so that, once
> + * we safely grab a NON-NULL reference from the array we can keep it and use it.
> + */
> +struct scmi_registered_protocol_events_desc {
> + u8 id;
> + const struct scmi_protocol_event_ops *ops;
> + struct events_queue equeue;
> + struct scmi_notify_instance *ni;
> + struct scmi_event_header *eh;
> + size_t eh_sz;
> + void *in_flight;
> + int num_events;
> + struct scmi_registered_event **registered_events;
> +};
> +
> +/**
> + * struct scmi_registered_event - Event Specific Information
> + * @proto: A reference to the associated protocol descriptor
> + * @evt: A reference to the associated event descriptor (as provided at
> + * registration time)
> + * @report: A pre-allocated buffer used by the deferred worker to fill a
> + * customized event report
> + * @num_sources: The number of possible sources for this event as stated at
> + * events' registration time
> + * @sources: A reference to a dynamically allocated array used to refcount the
> + * events' enable requests for all the existing sources
> + * @sources_mtx: A mutex to serialize the access to @sources
> + *
> + * All registered events are represented by one of these structures that are
> + * stored in the @registered_events array at protocol registration time.
> + *
> + * Once these descriptors are successfully registered, they are NEVER again
> + * removed or modified since protocols do not unregister ever, so that once we
> + * safely grab a NON-NULL reference from the table we can keep it and use it.
> + */
> +struct scmi_registered_event {
> + struct scmi_registered_protocol_events_desc *proto;
> + const struct scmi_event *evt;
> + void *report;
> + u32 num_sources;
> + refcount_t *sources;
> + struct mutex sources_mtx;
> +};
> +
> +/**
> + * scmi_kfifo_free() - Devres action helper to free the kfifo
> + * @kfifo: The kfifo to free
> + */
> +static void scmi_kfifo_free(void *kfifo)
> +{
> + kfifo_free((struct kfifo *)kfifo);
> +}
> +
> +/**
> + * scmi_initialize_events_queue() - Allocate/Initialize a kfifo buffer
> + * @ni: A reference to the notification instance to use
> + * @equeue: The events_queue to initialize
> + * @sz: Size of the kfifo buffer to allocate
> + *
> + * Allocate a buffer for the kfifo and initialize it.
> + *
> + * Return: 0 on Success
> + */
> +static int scmi_initialize_events_queue(struct scmi_notify_instance *ni,
> + struct events_queue *equeue, size_t sz)
> +{
> + if (kfifo_alloc(&equeue->kfifo, sz, GFP_KERNEL))
> + return -ENOMEM;
> + /* Size could have been roundup to power-of-two */
> + equeue->sz = kfifo_size(&equeue->kfifo);
> +
> + return devm_add_action_or_reset(ni->handle->dev, scmi_kfifo_free,
> + &equeue->kfifo);
> +}
> +
> +/**
> + * scmi_allocate_registered_protocol_desc() - Allocate a registered protocol
> + * events' descriptor
> + * @ni: A reference to the &struct scmi_notify_instance notification instance
> + * to use
> + * @proto_id: Protocol ID
> + * @queue_sz: Size of the associated queue to allocate
> + * @eh_sz: Size of the event header scratch area to pre-allocate
> + * @num_events: Number of events to support (size of @registered_events)
> + * @ops: Pointer to a struct holding references to protocol specific helpers
> + * needed during events handling
> + *
> + * It is supposed to be called only once for each protocol at protocol
> + * initialization time, so it warns if the requested protocol is found already
> + * registered.
> + *
> + * Return: The allocated and registered descriptor on Success
> + */
> +static struct scmi_registered_protocol_events_desc *
> +scmi_allocate_registered_protocol_desc(struct scmi_notify_instance *ni,
> + u8 proto_id, size_t queue_sz,
> + size_t eh_sz, int num_events,
> + const struct scmi_protocol_event_ops *ops)
> +{
> + int ret;
> + struct scmi_registered_protocol_events_desc *pd;
> +
> + /* Ensure protocols are up to date */
> + smp_rmb();
> + if (ni->registered_protocols[proto_id]) {
> + WARN_ON(1);
Can't this be if (WARN_ON(ni->registered_protocols[proto_id])) ?
> + return ERR_PTR(-EINVAL);
> + }
> +
> + pd = devm_kzalloc(ni->handle->dev, sizeof(*pd), GFP_KERNEL);
> + if (!pd)
> + return ERR_PTR(-ENOMEM);
> + pd->id = proto_id;
> + pd->ops = ops;
> + pd->ni = ni;
> +
> + ret = scmi_initialize_events_queue(ni, &pd->equeue, queue_sz);
> + if (ret)
> + return ERR_PTR(ret);
> +
> + pd->eh = devm_kzalloc(ni->handle->dev, eh_sz, GFP_KERNEL);
> + if (!pd->eh)
> + return ERR_PTR(-ENOMEM);
> + pd->eh_sz = eh_sz;
> +
> + pd->registered_events = devm_kcalloc(ni->handle->dev, num_events,
> + sizeof(char *), GFP_KERNEL);
> + if (!pd->registered_events)
> + return ERR_PTR(-ENOMEM);
> + pd->num_events = num_events;
> +
> + return pd;
> +}
> +
> +/**
> + * scmi_register_protocol_events() - Register Protocol Events with the core
> + * @handle: The handle identifying the platform instance against which the
> + * the protocol's events are registered
> + * @proto_id: Protocol ID
> + * @queue_sz: Size in bytes of the associated queue to be allocated
> + * @ops: Protocol specific event-related operations
> + * @evt: Event descriptor array
> + * @num_events: Number of events in @evt array
> + * @num_sources: Number of possible sources for this protocol on this
> + * platform.
> + *
> + * Used by SCMI Protocols initialization code to register with the notification
> + * core the list of supported events and their descriptors: takes care to
> + * pre-allocate and store all needed descriptors, scratch buffers and event
> + * queues.
> + *
> + * Return: 0 on Success
> + */
> +int scmi_register_protocol_events(const struct scmi_handle *handle,
> + u8 proto_id, size_t queue_sz,
> + const struct scmi_protocol_event_ops *ops,
> + const struct scmi_event *evt, int num_events,
> + int num_sources)
> +{
> + int i;
> + size_t payld_sz = 0;
> + struct scmi_registered_protocol_events_desc *pd;
> + struct scmi_notify_instance *ni;
> +
> + if (!ops || !evt || proto_id >= SCMI_MAX_PROTO)
> + return -EINVAL;
> +
> + /* Ensure notify_priv is updated */
> + smp_rmb();
> + if (unlikely(!handle->notify_priv))
> + return -ENOMEM;
> + ni = handle->notify_priv;
> +
> + /* Attach to the notification main devres group */
> + if (!devres_open_group(ni->handle->dev, ni->gid, GFP_KERNEL))
> + return -ENOMEM;
> +
> + for (i = 0; i < num_events; i++)
> + payld_sz = max_t(size_t, payld_sz, evt[i].max_payld_sz);
> + pd = scmi_allocate_registered_protocol_desc(ni, proto_id, queue_sz,
> + sizeof(struct scmi_event_header) + payld_sz,
> + num_events, ops);
> + if (IS_ERR(pd))
> + goto err;
> +
> + for (i = 0; i < num_events; i++, evt++) {
> + struct scmi_registered_event *r_evt;
> +
> + r_evt = devm_kzalloc(ni->handle->dev, sizeof(*r_evt),
> + GFP_KERNEL);
> + if (!r_evt)
> + goto err;
> + r_evt->proto = pd;
> + r_evt->evt = evt;
> +
> + r_evt->sources = devm_kcalloc(ni->handle->dev, num_sources,
> + sizeof(refcount_t), GFP_KERNEL);
> + if (!r_evt->sources)
> + goto err;
> + r_evt->num_sources = num_sources;
> + mutex_init(&r_evt->sources_mtx);
> +
> + r_evt->report = devm_kzalloc(ni->handle->dev,
> + evt->max_report_sz, GFP_KERNEL);
> + if (!r_evt->report)
> + goto err;
> +
> + pd->registered_events[i] = r_evt;
> + /* Ensure events are updated */
> + smp_wmb();
> + pr_info("SCMI Notifications: registered event - %X\n",
> + MAKE_ALL_SRCS_KEY(r_evt->proto->id, r_evt->evt->id));
> + }
> +
> + /* Register protocol and events...it will never be removed */
> + ni->registered_protocols[proto_id] = pd;
> + /* Ensure protocols are updated */
> + smp_wmb();
> +
> + devres_close_group(ni->handle->dev, ni->gid);
> +
> + return 0;
> +
> +err:
> + pr_warn("SCMI Notifications - Proto:%X - Registration Failed !\n",
> + proto_id);
> + /* A failing protocol registration does not trigger full failure */
> + devres_close_group(ni->handle->dev, ni->gid);
> +
> + return -ENOMEM;
> +}
> +
> +/**
> + * scmi_notification_init() - Initializes Notification Core Support
> + * @handle: The handle identifying the platform instance to initialize
> + *
> + * This function lays out all the basic resources needed by the notification
> + * core instance identified by the provided handle: once done, all of the
> + * SCMI Protocols can register their events with the core during their own
> + * initializations.
> + *
> + * Note that failing to initialize the core notifications support does not
> + * cause the whole SCMI Protocols stack to fail its initialization.
> + *
> + * SCMI Notification Initialization happens in 2 steps:
> + * * initialization: basic common allocations (this function)
> + * * registration: protocols asynchronously come into life and registers their
> + * own supported list of events with the core; this causes
> + * further per-protocol allocations
> + *
> + * Any user's callback registration attempt, referring a still not registered
> + * event, will be registered as pending and finalized later (if possible)
> + * by scmi_protocols_late_init() work.
> + * This allows for lazy initialization of SCMI Protocols due to late (or
> + * missing) SCMI drivers' modules loading.
> + *
> + * Return: 0 on Success
> + */
> +int scmi_notification_init(struct scmi_handle *handle)
> +{
> + void *gid;
> + struct scmi_notify_instance *ni;
> +
> + gid = devres_open_group(handle->dev, NULL, GFP_KERNEL);
> + if (!gid)
> + return -ENOMEM;
> +
> + ni = devm_kzalloc(handle->dev, sizeof(*ni), GFP_KERNEL);
> + if (!ni)
> + goto err;
> +
> + ni->gid = gid;
> + ni->handle = handle;
> +
> + ni->registered_protocols = devm_kcalloc(handle->dev, SCMI_MAX_PROTO,
> + sizeof(char *), GFP_KERNEL);
May not be too expensive, do we have to allocate for all 256 possible
protocols ? Will it help if we share list of implemented protocols.
I know this may get complex once we add support for registering protocols
later, but do we need it now ?
> + if (!ni->registered_protocols)
> + goto err;
> +
> + handle->notify_priv = ni;
> + /* Ensure handle is up to date */
> + smp_wmb();
> +
> + pr_info("SCMI Notifications Core Enabled.\n");
> +
> + devres_close_group(handle->dev, ni->gid);
> +
> + return 0;
> +
> +err:
> + pr_warn("SCMI Notifications - Initialization Failed.\n");
You have defined pr_fmt, do you still need "SCMI Notifications" for
all the logging(err/warn/info) everywhere in the file. Making use of
it will help you trim the messages without loosing it in the log. Update
pr_fmt if needed.
> + devres_release_group(handle->dev, NULL);
> + return -ENOMEM;
> +}
> +
> +/**
> + * scmi_notification_exit() - Shutdown and clean Notification core
> + * @handle: The handle identifying the platform instance to shutdown
> + */
> +void scmi_notification_exit(struct scmi_handle *handle)
> +{
> + struct scmi_notify_instance *ni;
> +
> + /* Ensure notify_priv is updated */
> + smp_rmb();
> + if (unlikely(!handle->notify_priv))
> + return;
> + ni = handle->notify_priv;
> +
> + devres_release_group(ni->handle->dev, ni->gid);
> +}
> diff --git a/drivers/firmware/arm_scmi/notify.h b/drivers/firmware/arm_scmi/notify.h
> new file mode 100644
> index 000000000000..54094aaf812a
> --- /dev/null
> +++ b/drivers/firmware/arm_scmi/notify.h
> @@ -0,0 +1,56 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * System Control and Management Interface (SCMI) Message Protocol
> + * notification header file containing some definitions, structures
> + * and function prototypes related to SCMI Notification handling.
> + *
> + * Copyright (C) 2020 ARM Ltd.
> + */
> +#ifndef _SCMI_NOTIFY_H
> +#define _SCMI_NOTIFY_H
> +
> +#include <linux/device.h>
> +#include <linux/types.h>
> +
> +/**
> + * struct scmi_event - Describes an event to be supported
> + * @id: Event ID
> + * @max_payld_sz: Max possible size for the payload of a notif msg of this kind
> + * @max_report_sz: Max possible size for the report of a notif msg of this kind
:s/notif msg of this kind/notification message/
--
Regards,
Sudeep
next prev parent reply other threads:[~2020-06-08 17:03 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-20 8:11 [PATCH v8 0/9] SCMI Notifications Core Support Cristian Marussi
2020-05-20 8:11 ` Cristian Marussi
2020-05-20 8:11 ` [PATCH v8 1/9] firmware: arm_scmi: Add notification protocol-registration Cristian Marussi
2020-05-20 8:11 ` Cristian Marussi
2020-06-08 17:02 ` Sudeep Holla [this message]
2020-06-08 17:02 ` Sudeep Holla
2020-06-16 19:58 ` Cristian Marussi
2020-06-16 19:58 ` Cristian Marussi
2020-05-20 8:11 ` [PATCH v8 2/9] firmware: arm_scmi: Add notification callbacks-registration Cristian Marussi
2020-05-20 8:11 ` Cristian Marussi
2020-06-08 17:03 ` Sudeep Holla
2020-06-08 17:03 ` Sudeep Holla
2020-06-17 23:20 ` Cristian Marussi
2020-06-17 23:20 ` Cristian Marussi
2020-05-20 8:11 ` [PATCH v8 3/9] firmware: arm_scmi: Add notification dispatch and delivery Cristian Marussi
2020-05-20 8:11 ` Cristian Marussi
2020-06-08 17:03 ` Sudeep Holla
2020-06-08 17:03 ` Sudeep Holla
2020-06-17 23:31 ` Cristian Marussi
2020-06-17 23:31 ` Cristian Marussi
2020-06-18 8:37 ` Lukasz Luba
2020-06-18 8:37 ` Lukasz Luba
2020-05-20 8:11 ` [PATCH v8 4/9] firmware: arm_scmi: Enable notification core Cristian Marussi
2020-05-20 8:11 ` Cristian Marussi
2020-05-20 8:11 ` [PATCH v8 5/9] firmware: arm_scmi: Add Power notifications support Cristian Marussi
2020-05-20 8:11 ` Cristian Marussi
2020-05-20 8:11 ` [PATCH v8 6/9] firmware: arm_scmi: Add Perf " Cristian Marussi
2020-05-20 8:11 ` Cristian Marussi
2020-05-20 8:11 ` [PATCH v8 7/9] firmware: arm_scmi: Add Sensor " Cristian Marussi
2020-05-20 8:11 ` Cristian Marussi
2020-05-20 8:11 ` [PATCH v8 8/9] firmware: arm_scmi: Add Reset " Cristian Marussi
2020-05-20 8:11 ` Cristian Marussi
2020-05-20 8:11 ` [PATCH v8 9/9] firmware: arm_scmi: Add Base " Cristian Marussi
2020-05-20 8:11 ` Cristian Marussi
2020-06-08 17:02 ` Sudeep Holla
2020-06-08 17:02 ` Sudeep Holla
2020-06-18 17:24 ` Cristian Marussi
2020-06-18 17:24 ` Cristian Marussi
2020-06-08 17:05 ` [PATCH v8 0/9] SCMI Notifications Core Support Sudeep Holla
2020-06-08 17:05 ` Sudeep Holla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200608170258.GB13622@bogus \
--to=sudeep.holla@arm.com \
--cc=Jonathan.Cameron@Huawei.com \
--cc=cristian.marussi@arm.com \
--cc=dave.martin@arm.com \
--cc=james.quinlan@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lukasz.luba@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.