* [PATCH v7] ARM: DTS: Aspeed: Add YADRO Nicole BMC @ 2020-04-29 11:37 ` Alexander Filippov 0 siblings, 0 replies; 12+ messages in thread From: Alexander Filippov @ 2020-04-29 11:37 UTC (permalink / raw) To: linux-aspeed Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured by YADRO. Signed-off-by: Alexander Filippov <a.filippov@yadro.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts | 326 ++++++++++++++++++++ 2 files changed, 327 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e8dd99201397..6f9fe0f959f2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1347,6 +1347,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-microsoft-olympus.dtb \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-mihawk.dtb \ + aspeed-bmc-opp-nicole.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ aspeed-bmc-opp-swift.dtb \ diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts new file mode 100644 index 000000000000..91dced7e7849 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2019 YADRO +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Nicole BMC"; + compatible = "yadro,nicole-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory at 80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer at 9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; /* 16M */ + }; + + flash_memory: region at 98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + coldfire_memory: codefire_memory at 9ef00000 { + reg = <0x9ef00000 0x00100000>; + no-map; + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "platform:green:power"; + gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>; + }; + + identify { + label = "platform:blue:indicator"; + gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>; + }; + + fault { + label = "platform:red:fault"; + gpios = <&gpio ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>; + }; + + attention { + label = "platform:yellow:alarm"; + gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>; + }; + }; + + fsi: gpio-fsi { + compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + memory-region = <&coldfire_memory>; + aspeed,sram = <&sram>; + aspeed,cvic = <&cvic>; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; +}; + +&fmc { + status = "okay"; + flash at 0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash at 0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + use-ncsi; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; +}; + +&i2c0 { + status = "okay"; + + eeprom at 50 { + compatible = "atmel,24c256"; + reg = <0x50>; + pagesize = <64>; + }; +}; + +&i2c2 { + status = "okay"; + /* CPU0 characterization connector */ +}; + +&i2c3 { + status = "okay"; + /* CLK GEN SI5338 */ +}; + +&i2c4 { + status = "okay"; + /* Voltage regulators for CPU0 */ +}; + +&i2c5 { + status = "okay"; + /* Voltage regulators for CPU1 */ +}; + +&i2c6 { + status = "okay"; + + rtc at 32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&i2c7 { + status = "okay"; + /* CPLD */ +}; + +&gpio { + gpio-line-names = + /*A0-A7*/ "","cfam-reset","","","","","fsi-mux","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "fsi-enable","bmc_power_up","sys_pwrok_buf", + "func_mode0","func_mode1","func_mode2","","", + /*E0-E7*/ "","ncsi_cfg","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","checkstop","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","power-button","","","","","", + /*P0-P7*/ "","fsi-trans","pm_rtc_adc_en","","","","","", + /*Q0-Q7*/ "","","","","","","","id-button", + /*R0-R7*/ "","software_pwrgood","","","","","","", + /*S0-S7*/ "","","","","","","","seq_cont", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "fsi-clock","led-attention","fsi-data","led-fault", + "led-power","","","led-identify", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; + + func_mode0 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>; + output-low; + }; + func_mode1 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>; + output-low; + }; + func_mode2 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>; + output-low; + }; + seq_cont { + gpio-hog; + gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>; + output-low; + }; + ncsi_cfg { + gpio-hog; + input; + gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>; + }; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&ibt { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&adc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc11_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default + &pinctrl_adc15_default>; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +#include "ibm-power9-dual.dtsi" -- 2.21.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v7] ARM: DTS: Aspeed: Add YADRO Nicole BMC @ 2020-04-29 11:37 ` Alexander Filippov 0 siblings, 0 replies; 12+ messages in thread From: Alexander Filippov @ 2020-04-29 11:37 UTC (permalink / raw) To: linux-aspeed Cc: linux-arm-kernel, linux-kernel, devicetree, Andrew Jeffery, Joel Stanley, Rob Herring, Andrew Geissler, Patrick Williams, Alexander Filippov Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured by YADRO. Signed-off-by: Alexander Filippov <a.filippov@yadro.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts | 326 ++++++++++++++++++++ 2 files changed, 327 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e8dd99201397..6f9fe0f959f2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1347,6 +1347,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-microsoft-olympus.dtb \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-mihawk.dtb \ + aspeed-bmc-opp-nicole.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ aspeed-bmc-opp-swift.dtb \ diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts new file mode 100644 index 000000000000..91dced7e7849 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2019 YADRO +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Nicole BMC"; + compatible = "yadro,nicole-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; /* 16M */ + }; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + coldfire_memory: codefire_memory@9ef00000 { + reg = <0x9ef00000 0x00100000>; + no-map; + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "platform:green:power"; + gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>; + }; + + identify { + label = "platform:blue:indicator"; + gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>; + }; + + fault { + label = "platform:red:fault"; + gpios = <&gpio ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>; + }; + + attention { + label = "platform:yellow:alarm"; + gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>; + }; + }; + + fsi: gpio-fsi { + compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + memory-region = <&coldfire_memory>; + aspeed,sram = <&sram>; + aspeed,cvic = <&cvic>; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + use-ncsi; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + pagesize = <64>; + }; +}; + +&i2c2 { + status = "okay"; + /* CPU0 characterization connector */ +}; + +&i2c3 { + status = "okay"; + /* CLK GEN SI5338 */ +}; + +&i2c4 { + status = "okay"; + /* Voltage regulators for CPU0 */ +}; + +&i2c5 { + status = "okay"; + /* Voltage regulators for CPU1 */ +}; + +&i2c6 { + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&i2c7 { + status = "okay"; + /* CPLD */ +}; + +&gpio { + gpio-line-names = + /*A0-A7*/ "","cfam-reset","","","","","fsi-mux","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "fsi-enable","bmc_power_up","sys_pwrok_buf", + "func_mode0","func_mode1","func_mode2","","", + /*E0-E7*/ "","ncsi_cfg","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","checkstop","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","power-button","","","","","", + /*P0-P7*/ "","fsi-trans","pm_rtc_adc_en","","","","","", + /*Q0-Q7*/ "","","","","","","","id-button", + /*R0-R7*/ "","software_pwrgood","","","","","","", + /*S0-S7*/ "","","","","","","","seq_cont", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "fsi-clock","led-attention","fsi-data","led-fault", + "led-power","","","led-identify", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; + + func_mode0 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>; + output-low; + }; + func_mode1 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>; + output-low; + }; + func_mode2 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>; + output-low; + }; + seq_cont { + gpio-hog; + gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>; + output-low; + }; + ncsi_cfg { + gpio-hog; + input; + gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>; + }; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&ibt { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&adc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc11_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default + &pinctrl_adc15_default>; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +#include "ibm-power9-dual.dtsi" -- 2.21.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v7] ARM: DTS: Aspeed: Add YADRO Nicole BMC @ 2020-04-29 11:37 ` Alexander Filippov 0 siblings, 0 replies; 12+ messages in thread From: Alexander Filippov @ 2020-04-29 11:37 UTC (permalink / raw) To: linux-aspeed Cc: devicetree, Andrew Jeffery, linux-kernel, Alexander Filippov, Patrick Williams, Rob Herring, Joel Stanley, Andrew Geissler, linux-arm-kernel Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured by YADRO. Signed-off-by: Alexander Filippov <a.filippov@yadro.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts | 326 ++++++++++++++++++++ 2 files changed, 327 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e8dd99201397..6f9fe0f959f2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1347,6 +1347,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-microsoft-olympus.dtb \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-mihawk.dtb \ + aspeed-bmc-opp-nicole.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ aspeed-bmc-opp-swift.dtb \ diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts new file mode 100644 index 000000000000..91dced7e7849 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2019 YADRO +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Nicole BMC"; + compatible = "yadro,nicole-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; /* 16M */ + }; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + coldfire_memory: codefire_memory@9ef00000 { + reg = <0x9ef00000 0x00100000>; + no-map; + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "platform:green:power"; + gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>; + }; + + identify { + label = "platform:blue:indicator"; + gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>; + }; + + fault { + label = "platform:red:fault"; + gpios = <&gpio ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>; + }; + + attention { + label = "platform:yellow:alarm"; + gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>; + }; + }; + + fsi: gpio-fsi { + compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + memory-region = <&coldfire_memory>; + aspeed,sram = <&sram>; + aspeed,cvic = <&cvic>; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + use-ncsi; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + pagesize = <64>; + }; +}; + +&i2c2 { + status = "okay"; + /* CPU0 characterization connector */ +}; + +&i2c3 { + status = "okay"; + /* CLK GEN SI5338 */ +}; + +&i2c4 { + status = "okay"; + /* Voltage regulators for CPU0 */ +}; + +&i2c5 { + status = "okay"; + /* Voltage regulators for CPU1 */ +}; + +&i2c6 { + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&i2c7 { + status = "okay"; + /* CPLD */ +}; + +&gpio { + gpio-line-names = + /*A0-A7*/ "","cfam-reset","","","","","fsi-mux","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "fsi-enable","bmc_power_up","sys_pwrok_buf", + "func_mode0","func_mode1","func_mode2","","", + /*E0-E7*/ "","ncsi_cfg","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","checkstop","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","power-button","","","","","", + /*P0-P7*/ "","fsi-trans","pm_rtc_adc_en","","","","","", + /*Q0-Q7*/ "","","","","","","","id-button", + /*R0-R7*/ "","software_pwrgood","","","","","","", + /*S0-S7*/ "","","","","","","","seq_cont", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "fsi-clock","led-attention","fsi-data","led-fault", + "led-power","","","led-identify", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; + + func_mode0 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>; + output-low; + }; + func_mode1 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>; + output-low; + }; + func_mode2 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>; + output-low; + }; + seq_cont { + gpio-hog; + gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>; + output-low; + }; + ncsi_cfg { + gpio-hog; + input; + gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>; + }; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&ibt { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&adc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc11_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default + &pinctrl_adc15_default>; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +#include "ibm-power9-dual.dtsi" -- 2.21.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v7] ARM: DTS: Aspeed: Add YADRO Nicole BMC 2020-04-29 11:37 ` Alexander Filippov (?) @ 2020-05-01 11:40 ` Patrick Williams -1 siblings, 0 replies; 12+ messages in thread From: Patrick Williams @ 2020-05-01 11:40 UTC (permalink / raw) To: linux-aspeed On Wed, Apr 29, 2020 at 02:37:11PM +0300, Alexander Filippov wrote: > Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured > by YADRO. > > Signed-off-by: Alexander Filippov <a.filippov@yadro.com> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts | 326 ++++++++++++++++++++ > 2 files changed, 327 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts > Reviewed-by: Patrick Williams <patrick@stwcx.xyz> -- Patrick Williams -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: <http://lists.ozlabs.org/pipermail/linux-aspeed/attachments/20200501/0e7bfc01/attachment.sig> ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v7] ARM: DTS: Aspeed: Add YADRO Nicole BMC @ 2020-05-01 11:40 ` Patrick Williams 0 siblings, 0 replies; 12+ messages in thread From: Patrick Williams @ 2020-05-01 11:40 UTC (permalink / raw) To: Alexander Filippov Cc: linux-aspeed, linux-arm-kernel, linux-kernel, devicetree, Andrew Jeffery, Joel Stanley, Rob Herring, Andrew Geissler [-- Attachment #1: Type: text/plain, Size: 547 bytes --] On Wed, Apr 29, 2020 at 02:37:11PM +0300, Alexander Filippov wrote: > Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured > by YADRO. > > Signed-off-by: Alexander Filippov <a.filippov@yadro.com> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts | 326 ++++++++++++++++++++ > 2 files changed, 327 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts > Reviewed-by: Patrick Williams <patrick@stwcx.xyz> -- Patrick Williams [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v7] ARM: DTS: Aspeed: Add YADRO Nicole BMC @ 2020-05-01 11:40 ` Patrick Williams 0 siblings, 0 replies; 12+ messages in thread From: Patrick Williams @ 2020-05-01 11:40 UTC (permalink / raw) To: Alexander Filippov Cc: devicetree, linux-aspeed, Andrew Jeffery, linux-kernel, Rob Herring, Joel Stanley, Andrew Geissler, linux-arm-kernel [-- Attachment #1.1: Type: text/plain, Size: 547 bytes --] On Wed, Apr 29, 2020 at 02:37:11PM +0300, Alexander Filippov wrote: > Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured > by YADRO. > > Signed-off-by: Alexander Filippov <a.filippov@yadro.com> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts | 326 ++++++++++++++++++++ > 2 files changed, 327 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts > Reviewed-by: Patrick Williams <patrick@stwcx.xyz> -- Patrick Williams [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v7] ARM: DTS: Aspeed: Add YADRO Nicole BMC 2020-04-29 11:37 ` Alexander Filippov (?) @ 2020-06-10 8:15 ` Alexander A. Filippov -1 siblings, 0 replies; 12+ messages in thread From: Alexander A. Filippov @ 2020-06-10 8:15 UTC (permalink / raw) To: linux-aspeed On Wed, Apr 29, 2020 at 02:37:11PM +0300, Alexander Filippov wrote: > Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured > by YADRO. > > Signed-off-by: Alexander Filippov <a.filippov@yadro.com> > ping ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v7] ARM: DTS: Aspeed: Add YADRO Nicole BMC @ 2020-06-10 8:15 ` Alexander A. Filippov 0 siblings, 0 replies; 12+ messages in thread From: Alexander A. Filippov @ 2020-06-10 8:15 UTC (permalink / raw) To: Alexander Filippov Cc: linux-aspeed, linux-arm-kernel, linux-kernel, devicetree, Andrew Jeffery, Joel Stanley, Rob Herring, Andrew Geissler, Patrick Williams On Wed, Apr 29, 2020 at 02:37:11PM +0300, Alexander Filippov wrote: > Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured > by YADRO. > > Signed-off-by: Alexander Filippov <a.filippov@yadro.com> > ping ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v7] ARM: DTS: Aspeed: Add YADRO Nicole BMC @ 2020-06-10 8:15 ` Alexander A. Filippov 0 siblings, 0 replies; 12+ messages in thread From: Alexander A. Filippov @ 2020-06-10 8:15 UTC (permalink / raw) To: Alexander Filippov Cc: devicetree, linux-aspeed, Andrew Jeffery, linux-kernel, Patrick Williams, Rob Herring, Joel Stanley, Andrew Geissler, linux-arm-kernel On Wed, Apr 29, 2020 at 02:37:11PM +0300, Alexander Filippov wrote: > Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured > by YADRO. > > Signed-off-by: Alexander Filippov <a.filippov@yadro.com> > ping _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v7] ARM: DTS: Aspeed: Add YADRO Nicole BMC 2020-06-10 8:15 ` Alexander A. Filippov (?) @ 2020-06-11 12:05 ` Joel Stanley -1 siblings, 0 replies; 12+ messages in thread From: Joel Stanley @ 2020-06-11 12:05 UTC (permalink / raw) To: linux-aspeed On Wed, 10 Jun 2020 at 08:15, Alexander A. Filippov <a.filippov@yadro.com> wrote: > > On Wed, Apr 29, 2020 at 02:37:11PM +0300, Alexander Filippov wrote: > > Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured > > by YADRO. > > > > Signed-off-by: Alexander Filippov <a.filippov@yadro.com> > > > > ping Reviewed-by: Joel Stanley <joel@jms.id.au> This missed the merge window for 5.8. I will queue it up after -rc1 is released for 5.9. Cheers, Joel ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v7] ARM: DTS: Aspeed: Add YADRO Nicole BMC @ 2020-06-11 12:05 ` Joel Stanley 0 siblings, 0 replies; 12+ messages in thread From: Joel Stanley @ 2020-06-11 12:05 UTC (permalink / raw) To: Alexander A. Filippov Cc: linux-aspeed, Linux ARM, Linux Kernel Mailing List, devicetree, Andrew Jeffery, Rob Herring, Andrew Geissler, Patrick Williams On Wed, 10 Jun 2020 at 08:15, Alexander A. Filippov <a.filippov@yadro.com> wrote: > > On Wed, Apr 29, 2020 at 02:37:11PM +0300, Alexander Filippov wrote: > > Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured > > by YADRO. > > > > Signed-off-by: Alexander Filippov <a.filippov@yadro.com> > > > > ping Reviewed-by: Joel Stanley <joel@jms.id.au> This missed the merge window for 5.8. I will queue it up after -rc1 is released for 5.9. Cheers, Joel ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v7] ARM: DTS: Aspeed: Add YADRO Nicole BMC @ 2020-06-11 12:05 ` Joel Stanley 0 siblings, 0 replies; 12+ messages in thread From: Joel Stanley @ 2020-06-11 12:05 UTC (permalink / raw) To: Alexander A. Filippov Cc: devicetree, linux-aspeed, Andrew Jeffery, Linux Kernel Mailing List, Patrick Williams, Rob Herring, Andrew Geissler, Linux ARM On Wed, 10 Jun 2020 at 08:15, Alexander A. Filippov <a.filippov@yadro.com> wrote: > > On Wed, Apr 29, 2020 at 02:37:11PM +0300, Alexander Filippov wrote: > > Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured > > by YADRO. > > > > Signed-off-by: Alexander Filippov <a.filippov@yadro.com> > > > > ping Reviewed-by: Joel Stanley <joel@jms.id.au> This missed the merge window for 5.8. I will queue it up after -rc1 is released for 5.9. Cheers, Joel _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2020-06-11 12:05 UTC | newest] Thread overview: 12+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2020-04-29 11:37 [PATCH v7] ARM: DTS: Aspeed: Add YADRO Nicole BMC Alexander Filippov 2020-04-29 11:37 ` Alexander Filippov 2020-04-29 11:37 ` Alexander Filippov 2020-05-01 11:40 ` Patrick Williams 2020-05-01 11:40 ` Patrick Williams 2020-05-01 11:40 ` Patrick Williams 2020-06-10 8:15 ` Alexander A. Filippov 2020-06-10 8:15 ` Alexander A. Filippov 2020-06-10 8:15 ` Alexander A. Filippov 2020-06-11 12:05 ` Joel Stanley 2020-06-11 12:05 ` Joel Stanley 2020-06-11 12:05 ` Joel Stanley
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.