From: Manikandan <manikandan.hcl.ers.epl@gmail.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v4] hwmon:(adm1275) Enable adm1278 ADM1278_TEMP1_EN
Date: Wed, 10 Jun 2020 20:22:50 +0530 [thread overview]
Message-ID: <20200610145250.GA25183@cnn> (raw)
In-Reply-To: <20200610132833.GA237017@roeck-us.net>
On Wed, Jun 10, 2020 at 06:28:33AM -0700, Guenter Roeck wrote:
> On Wed, Jun 10, 2020 at 01:56:11PM +0530, Manikandan Elumalai wrote:
> > The adm1278 temp attribute need it for openbmc platform .
> > This feature not enabled by default, so PMON_CONFIG needs to enable it.
> >
> > v4:
> > Reported-by: kernel test robot <lkp@intel.com>
> > ---
> > changes in conditional check to enable vout & temp1 by default.
> > v3:
> > ----
> > fix invalid signed-off.
> > removed checkpath warnings.
> > write ADM1278_TEMP1_EN and ADM1278_VOUT_EN conf in single line operation.
> > v2:
> > ----
> > add Signed-off-by.
> > removed ADM1278_TEMP1_EN check.
> >
> > Signed-off-by: Manikandan Elumalai <manikandan.hcl.ers.epl@gmail.com>
>
> Applied (and I fixed the problem reported by 0-day, so no need to resend).
> Thank you Guenter.
> Thanks,
> Guenter
>
> > ---
> > drivers/hwmon/pmbus/adm1275.c | 12 +++++-------
> > 1 file changed, 5 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
> > index 5caa37fb..d4e1925 100644
> > --- a/drivers/hwmon/pmbus/adm1275.c
> > +++ b/drivers/hwmon/pmbus/adm1275.c
> > @@ -666,11 +666,12 @@ static int adm1275_probe(struct i2c_client *client,
> > tindex = 3;
> >
> > info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
> > - PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
> > + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
> > + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
> >
> > - /* Enable VOUT if not enabled (it is disabled by default) */
> > - if (!(config & ADM1278_VOUT_EN)) {
> > - config |= ADM1278_VOUT_EN;
> > + /* Enable VOUT & TEMP1 if not enabled (disabled by default) */
> > + if (config & (ADM1278_VOUT_EN | ADM1278_TEMP1_EN) != ADM1278_VOUT_EN | ADM1278_TEMP1_EN) {
> > + config |= ADM1278_VOUT_EN | ADM1278_TEMP1_EN;
> > ret = i2c_smbus_write_byte_data(client,
> > ADM1275_PMON_CONFIG,
> > config);
> > @@ -681,9 +682,6 @@ static int adm1275_probe(struct i2c_client *client,
> > }
> > }
> >
> > - if (config & ADM1278_TEMP1_EN)
> > - info->func[0] |=
> > - PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
> > if (config & ADM1278_VIN_EN)
> > info->func[0] |= PMBUS_HAVE_VIN;
> > break;
WARNING: multiple messages have this Message-ID (diff)
From: Manikandan <manikandan.hcl.ers.epl@gmail.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>,
linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org,
saipsdasari@fb.com, patrickw3@fb.com, vijaykhemka@fb.com,
linux-aspeed@lists.ozlabs.org, openbmc@lists.ozlabs.org,
manikandan.e@hcl.com
Subject: Re: [PATCH v4] hwmon:(adm1275) Enable adm1278 ADM1278_TEMP1_EN
Date: Wed, 10 Jun 2020 20:22:50 +0530 [thread overview]
Message-ID: <20200610145250.GA25183@cnn> (raw)
In-Reply-To: <20200610132833.GA237017@roeck-us.net>
On Wed, Jun 10, 2020 at 06:28:33AM -0700, Guenter Roeck wrote:
> On Wed, Jun 10, 2020 at 01:56:11PM +0530, Manikandan Elumalai wrote:
> > The adm1278 temp attribute need it for openbmc platform .
> > This feature not enabled by default, so PMON_CONFIG needs to enable it.
> >
> > v4:
> > Reported-by: kernel test robot <lkp@intel.com>
> > ---
> > changes in conditional check to enable vout & temp1 by default.
> > v3:
> > ----
> > fix invalid signed-off.
> > removed checkpath warnings.
> > write ADM1278_TEMP1_EN and ADM1278_VOUT_EN conf in single line operation.
> > v2:
> > ----
> > add Signed-off-by.
> > removed ADM1278_TEMP1_EN check.
> >
> > Signed-off-by: Manikandan Elumalai <manikandan.hcl.ers.epl@gmail.com>
>
> Applied (and I fixed the problem reported by 0-day, so no need to resend).
> Thank you Guenter.
> Thanks,
> Guenter
>
> > ---
> > drivers/hwmon/pmbus/adm1275.c | 12 +++++-------
> > 1 file changed, 5 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
> > index 5caa37fb..d4e1925 100644
> > --- a/drivers/hwmon/pmbus/adm1275.c
> > +++ b/drivers/hwmon/pmbus/adm1275.c
> > @@ -666,11 +666,12 @@ static int adm1275_probe(struct i2c_client *client,
> > tindex = 3;
> >
> > info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
> > - PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
> > + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
> > + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
> >
> > - /* Enable VOUT if not enabled (it is disabled by default) */
> > - if (!(config & ADM1278_VOUT_EN)) {
> > - config |= ADM1278_VOUT_EN;
> > + /* Enable VOUT & TEMP1 if not enabled (disabled by default) */
> > + if (config & (ADM1278_VOUT_EN | ADM1278_TEMP1_EN) != ADM1278_VOUT_EN | ADM1278_TEMP1_EN) {
> > + config |= ADM1278_VOUT_EN | ADM1278_TEMP1_EN;
> > ret = i2c_smbus_write_byte_data(client,
> > ADM1275_PMON_CONFIG,
> > config);
> > @@ -681,9 +682,6 @@ static int adm1275_probe(struct i2c_client *client,
> > }
> > }
> >
> > - if (config & ADM1278_TEMP1_EN)
> > - info->func[0] |=
> > - PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
> > if (config & ADM1278_VIN_EN)
> > info->func[0] |= PMBUS_HAVE_VIN;
> > break;
next prev parent reply other threads:[~2020-06-10 14:52 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-10 8:26 [PATCH v4] hwmon:(adm1275) Enable adm1278 ADM1278_TEMP1_EN Manikandan Elumalai
2020-06-10 8:26 ` Manikandan Elumalai
2020-06-10 11:52 ` kernel test robot
2020-06-10 11:52 ` kernel test robot
2020-06-10 11:52 ` kernel test robot
2020-06-10 13:28 ` Guenter Roeck
2020-06-10 13:28 ` Guenter Roeck
2020-06-10 14:52 ` Manikandan [this message]
2020-06-10 14:52 ` Manikandan
-- strict thread matches above, loose matches on Subject: below --
2020-06-19 14:48 Manikandan Elumalai
2020-06-19 14:48 ` Manikandan Elumalai
2020-06-19 15:38 ` Guenter Roeck
2020-06-19 15:38 ` Guenter Roeck
2020-06-19 16:51 Manikandan Elumalai
2020-06-19 16:51 ` Manikandan Elumalai
2020-06-19 18:09 ` Milton Miller II
2020-06-19 18:09 ` Milton Miller II
2020-06-19 18:41 ` Guenter Roeck
2020-06-19 18:41 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200610145250.GA25183@cnn \
--to=manikandan.hcl.ers.epl@gmail.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.