[PATCH v6 1/5] dt-bindings: msm/dp: add bindings of DP/DP-PLL driver for Snapdragon

[Tanmay Shah <tanmay@codeaurora.org>]

From: Chandan Uddaraju <chandanu@codeaurora.org>

Add bindings for Snapdragon DisplayPort controller driver.

Changes in V2:
Provide details about sel-gpio

Changes in V4:
Provide details about max dp lanes
Change the commit text

Changes in V5:
moved dp.txt to yaml file

Changes in v6:
- Squash all AUX LUT properties into one pattern Property
- Make aux-cfg[0-9]-settings properties optional
- Remove PLL/PHY bindings from DP controller dts
- Add DP clocks description
- Remove _clk suffix from clock names
- Rename pixel clock to stream_pixel
- Remove redundant bindings (GPIO, PHY, HDCP clock, etc..)
- Fix indentation
- Add Display Port as interface of DPU in DPU bindings
  and add port mapping accordingly.

Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
---
 .../bindings/display/msm/dp-sc7180.yaml       | 142 ++++++++++++++++++
 .../devicetree/bindings/display/msm/dpu.txt   |   8 +
 2 files changed, 150 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/msm/dp-sc7180.yaml

diff --git a/Documentation/devicetree/bindings/display/msm/dp-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dp-sc7180.yaml
new file mode 100644
index 000000000000..5fdb9153df00
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dp-sc7180.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only  OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dp-sc7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Port Controller.
+
+maintainers:
+  - Chandan Uddaraju <chandanu@codeaurora.org>
+  - Vara Reddy <varar@codeaurora.org>
+  - Tanmay Shah <tanmay@codeaurora.org>
+
+description: |
+  Device tree bindings for MSM Display Port which supports DP host controllers
+  that are compatible with VESA Display Port interface specification.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,dp-display
+
+  cell-index:
+    description: Specifies the controller instance.
+
+  reg:
+    items:
+      - description: DP controller registers
+
+  interrupts:
+    description: The interrupt signal from the DP block.
+
+  clocks:
+    description: List of clock specifiers for clocks needed by the device.
+    items:
+      - description: Display Port AUX clock
+      - description: Display Port Link clock
+      - description: Link interface clock between DP and PHY
+      - description: Display Port Pixel clock
+      - description: Root clock generator for pixel clock
+
+  clock-names:
+    description: |
+      Device clock names in the same order as mentioned in clocks property.
+      The required clocks are mentioned below.
+    items:
+      - const: core_aux
+      - const: ctrl_link
+      - const: ctrl_link_iface
+      - const: stream_pixel
+      - const: pixel_rcg
+  "#clock-cells":
+    const: 1
+
+  vdda-1p2-supply:
+    description: phandle to vdda 1.2V regulator node.
+
+  vdda-0p9-supply:
+    description: phandle to vdda 0.9V regulator node.
+
+  data-lanes = <0 1>:
+    type: object
+    description: Maximum number of lanes that can be used for Display port.
+
+  ports:
+    description: |
+       Contains display port controller endpoint subnode.
+       remote-endpoint: |
+         For port@0, set to phandle of the connected panel/bridge's
+         input endpoint. For port@1, set to the DPU interface output.
+         Documentation/devicetree/bindings/graph.txt and
+         Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+patternProperties:
+  "^aux-cfg([0-9])-settings$":
+    type: object
+    description: |
+      Specifies the DP AUX configuration [0-9] settings.
+      The first entry in this array corresponds to the register offset
+      within DP AUX, while the remaining entries indicate the
+      programmable values.
+
+required:
+  - compatible
+  - cell-index
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vdda-1p2-supply
+  - vdda-0p9-supply
+  - data-lanes
+  - ports
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    msm_dp: displayport-controller@ae90000{
+        compatible = "qcom,dp-display";
+        cell-index = <0>;
+        reg = <0 0xae90000 0 0x1400>;
+        reg-names = "dp_controller";
+
+        interrupt-parent = <&display_subsystem>;
+        interrupts = <12 0>;
+
+        clocks = <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+                 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+                 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+                 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+                 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+        clock-names = "core_aux",
+                      "ctrl_link",
+                      "ctrl_link_iface", "stream_pixel",
+                      "pixel_rcg";
+        #clock-cells = <1>;
+
+        vdda-1p2-supply = <&vreg_l3c_1p2>;
+        vdda-0p9-supply = <&vreg_l4a_0p8>;
+
+        data-lanes = <0 1>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dp_in: endpoint {
+                    remote-endpoint = <&dpu_intf0_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dp_out: endpoint {
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
index 551ae26f60da..30c8ab479b02 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
@@ -65,6 +65,7 @@ Required properties:
 
 	Port 0 -> DPU_INTF1 (DSI1)
 	Port 1 -> DPU_INTF2 (DSI2)
+	Port 2 -> DPU_INTF0 (DP)
 
 Optional properties:
 - assigned-clocks: list of clock specifiers for clocks needing rate assignment
@@ -136,6 +137,13 @@ Example:
 						remote-endpoint = <&dsi1_in>;
 					};
 				};
+
+				port@2 {
+					reg = <2>;
+					dpu_intf0_out: endpoint {
+						remote-endpoint = <&dp_in>;
+					};
+				};
 			};
 		};
 	};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project