All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tanmay Shah <tanmay@codeaurora.org>
To: swboyd@chromium.org, agross@kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
	freedreno@lists.freedesktop.org, seanpaul@chromium.org,
	robdclark@gmail.com, dianders@chromium.org,
	aravindh@codeaurora.org, abhinavk@codeaurora.org,
	bjorn.andersson@linaro.org, Tanmay Shah <tanmay@codeaurora.org>
Subject: [PATCH v2] arm64: dts: qcom: sc7180: Add Display Port dt node
Date: Thu, 18 Jun 2020 16:21:13 -0700	[thread overview]
Message-ID: <20200618232113.22687-1-tanmay@codeaurora.org> (raw)

Enable DP driver for sc7180.

This change depends-on following series:
https://patchwork.freedesktop.org/series/78583/
and https://patchwork.freedesktop.org/patch/351990/

Changes in v2:

- Add assigned-clocks and assigned-clock-parents
- Remove cell-index and pixel_rcg
- Change compatible to qcom,sc7180-dp

Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 57 ++++++++++++++++++++++++++--
 1 file changed, 53 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 916401f7e87c..26fe623e3b0f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2216,10 +2216,19 @@ ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
+					port@1 {
+						reg = <1>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint =
+								 <&dsi0_in>;
+						};
+					};
+
 					port@0 {
 						reg = <0>;
-						dpu_intf1_out: endpoint {
-							remote-endpoint = <&dsi0_in>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint =
+								 <&dp_in>;
 						};
 					};
 				};
@@ -2293,6 +2302,46 @@ dsi_phy: dsi-phy@ae94400 {
 			};
 		};
 
+		msm_dp: displayport-controller@ae90000{
+			status = "ok";
+			compatible = "qcom,sc7180-dp";
+
+			reg = <0 0xae90000 0 0x1400>;
+			reg-names = "dp_controller";
+
+			interrupt-parent = <&mdss>;
+			interrupts = <12 0>;
+
+			clocks = <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+				 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+				 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+				 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+			clock-names = "core_aux", "ctrl_link",
+				      "ctrl_link_iface", "stream_pixel";
+			#clock-cells = <1>;
+			assigned-clocks = <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+			assigned-clock-parents = <&msm_dp 1>;
+
+			data-lanes = <0 1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dp_in: endpoint {
+						remote-endpoint =
+							 <&dpu_intf0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dp_out: endpoint { };
+				};
+			};
+		};
+
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,sc7180-dispcc";
 			reg = <0 0x0af00000 0 0x200000>;
@@ -2300,8 +2349,8 @@ dispcc: clock-controller@af00000 {
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&dsi_phy 0>,
 				 <&dsi_phy 1>,
-				 <0>,
-				 <0>;
+				 <&msm_dp 0>,
+				 <&msm_dp 1>;
 			clock-names = "bi_tcxo",
 				      "gcc_disp_gpll0_clk_src",
 				      "dsi0_phy_pll_out_byteclk",
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


WARNING: multiple messages have this Message-ID (diff)
From: Tanmay Shah <tanmay@codeaurora.org>
To: swboyd@chromium.org, agross@kernel.org
Cc: devicetree@vger.kernel.org, bjorn.andersson@linaro.org,
	linux-arm-msm@vger.kernel.org,
	Tanmay Shah <tanmay@codeaurora.org>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	dianders@chromium.org, seanpaul@chromium.org,
	abhinavk@codeaurora.org, aravindh@codeaurora.org,
	freedreno@lists.freedesktop.org
Subject: [PATCH v2] arm64: dts: qcom: sc7180: Add Display Port dt node
Date: Thu, 18 Jun 2020 16:21:13 -0700	[thread overview]
Message-ID: <20200618232113.22687-1-tanmay@codeaurora.org> (raw)

Enable DP driver for sc7180.

This change depends-on following series:
https://patchwork.freedesktop.org/series/78583/
and https://patchwork.freedesktop.org/patch/351990/

Changes in v2:

- Add assigned-clocks and assigned-clock-parents
- Remove cell-index and pixel_rcg
- Change compatible to qcom,sc7180-dp

Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 57 ++++++++++++++++++++++++++--
 1 file changed, 53 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 916401f7e87c..26fe623e3b0f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2216,10 +2216,19 @@ ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
+					port@1 {
+						reg = <1>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint =
+								 <&dsi0_in>;
+						};
+					};
+
 					port@0 {
 						reg = <0>;
-						dpu_intf1_out: endpoint {
-							remote-endpoint = <&dsi0_in>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint =
+								 <&dp_in>;
 						};
 					};
 				};
@@ -2293,6 +2302,46 @@ dsi_phy: dsi-phy@ae94400 {
 			};
 		};
 
+		msm_dp: displayport-controller@ae90000{
+			status = "ok";
+			compatible = "qcom,sc7180-dp";
+
+			reg = <0 0xae90000 0 0x1400>;
+			reg-names = "dp_controller";
+
+			interrupt-parent = <&mdss>;
+			interrupts = <12 0>;
+
+			clocks = <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+				 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+				 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+				 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+			clock-names = "core_aux", "ctrl_link",
+				      "ctrl_link_iface", "stream_pixel";
+			#clock-cells = <1>;
+			assigned-clocks = <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+			assigned-clock-parents = <&msm_dp 1>;
+
+			data-lanes = <0 1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dp_in: endpoint {
+						remote-endpoint =
+							 <&dpu_intf0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dp_out: endpoint { };
+				};
+			};
+		};
+
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,sc7180-dispcc";
 			reg = <0 0x0af00000 0 0x200000>;
@@ -2300,8 +2349,8 @@ dispcc: clock-controller@af00000 {
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&dsi_phy 0>,
 				 <&dsi_phy 1>,
-				 <0>,
-				 <0>;
+				 <&msm_dp 0>,
+				 <&msm_dp 1>;
 			clock-names = "bi_tcxo",
 				      "gcc_disp_gpll0_clk_src",
 				      "dsi0_phy_pll_out_byteclk",
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

             reply	other threads:[~2020-06-18 23:22 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-18 23:21 Tanmay Shah [this message]
2020-06-18 23:21 ` [PATCH v2] arm64: dts: qcom: sc7180: Add Display Port dt node Tanmay Shah
2020-06-19  1:12 ` Stephen Boyd
2020-06-19  1:12   ` Stephen Boyd
2020-06-19 21:55   ` tanmay
2020-06-19 21:55     ` tanmay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200618232113.22687-1-tanmay@codeaurora.org \
    --to=tanmay@codeaurora.org \
    --cc=abhinavk@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=aravindh@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robdclark@gmail.com \
    --cc=seanpaul@chromium.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.