From: David Hildenbrand <david@redhat.com>
To: qemu-devel@nongnu.org
Cc: kvm@vger.kernel.org, qemu-s390x@nongnu.org,
Richard Henderson <rth@twiddle.net>,
Paolo Bonzini <pbonzini@redhat.com>,
"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
Eduardo Habkost <ehabkost@redhat.com>,
"Michael S . Tsirkin" <mst@redhat.com>,
David Hildenbrand <david@redhat.com>,
Vivek Goyal <vgoyal@redhat.com>,
Pankaj Gupta <pankaj.gupta.linux@gmail.com>,
Igor Mammedov <imammedo@redhat.com>,
Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Subject: [PATCH v5 01/21] pc: Support coldplugging of virtio-pmem-pci devices on all buses
Date: Fri, 26 Jun 2020 09:22:28 +0200 [thread overview]
Message-ID: <20200626072248.78761-2-david@redhat.com> (raw)
In-Reply-To: <20200626072248.78761-1-david@redhat.com>
E.g., with "pc-q35-4.2", trying to coldplug a virtio-pmem-pci devices
results in
"virtio-pmem-pci not supported on this bus"
Reasons is, that the bus does not support hotplug and, therefore, does
not have a hotplug handler. Let's allow coldplugging virtio-pmem devices
on such buses. The hotplug order is only relevant for virtio-pmem-pci
when the guest is already alive and the device is visible before
memory_device_plug() wired up the memory device bits.
Hotplug attempts will still fail with:
"Error: Bus 'pcie.0' does not support hotplugging"
Hotunplug attempts will still fail with:
"Error: Bus 'pcie.0' does not support hotplugging"
Reported-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
---
hw/i386/pc.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index 803bd52ca4..2dfd69b973 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -1643,13 +1643,13 @@ static void pc_virtio_pmem_pci_pre_plug(HotplugHandler *hotplug_dev,
HotplugHandler *hotplug_dev2 = qdev_get_bus_hotplug_handler(dev);
Error *local_err = NULL;
- if (!hotplug_dev2) {
+ if (!hotplug_dev2 && dev->hotplugged) {
/*
* Without a bus hotplug handler, we cannot control the plug/unplug
- * order. This should never be the case on x86, however better add
- * a safety net.
+ * order. We should never reach this point when hotplugging on x86,
+ * however, better add a safety net.
*/
- error_setg(errp, "virtio-pmem-pci not supported on this bus.");
+ error_setg(errp, "virtio-pmem-pci hotplug not supported on this bus.");
return;
}
/*
@@ -1658,7 +1658,7 @@ static void pc_virtio_pmem_pci_pre_plug(HotplugHandler *hotplug_dev,
*/
memory_device_pre_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev), NULL,
&local_err);
- if (!local_err) {
+ if (!local_err && hotplug_dev2) {
hotplug_handler_pre_plug(hotplug_dev2, dev, &local_err);
}
error_propagate(errp, local_err);
@@ -1676,9 +1676,11 @@ static void pc_virtio_pmem_pci_plug(HotplugHandler *hotplug_dev,
* device bits.
*/
memory_device_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev));
- hotplug_handler_plug(hotplug_dev2, dev, &local_err);
- if (local_err) {
- memory_device_unplug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev));
+ if (hotplug_dev2) {
+ hotplug_handler_plug(hotplug_dev2, dev, &local_err);
+ if (local_err) {
+ memory_device_unplug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev));
+ }
}
error_propagate(errp, local_err);
}
--
2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: David Hildenbrand <david@redhat.com>
To: qemu-devel@nongnu.org
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>,
Eduardo Habkost <ehabkost@redhat.com>,
kvm@vger.kernel.org, "Michael S . Tsirkin" <mst@redhat.com>,
David Hildenbrand <david@redhat.com>,
"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
qemu-s390x@nongnu.org, Igor Mammedov <imammedo@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Vivek Goyal <vgoyal@redhat.com>,
Richard Henderson <rth@twiddle.net>
Subject: [PATCH v5 01/21] pc: Support coldplugging of virtio-pmem-pci devices on all buses
Date: Fri, 26 Jun 2020 09:22:28 +0200 [thread overview]
Message-ID: <20200626072248.78761-2-david@redhat.com> (raw)
In-Reply-To: <20200626072248.78761-1-david@redhat.com>
E.g., with "pc-q35-4.2", trying to coldplug a virtio-pmem-pci devices
results in
"virtio-pmem-pci not supported on this bus"
Reasons is, that the bus does not support hotplug and, therefore, does
not have a hotplug handler. Let's allow coldplugging virtio-pmem devices
on such buses. The hotplug order is only relevant for virtio-pmem-pci
when the guest is already alive and the device is visible before
memory_device_plug() wired up the memory device bits.
Hotplug attempts will still fail with:
"Error: Bus 'pcie.0' does not support hotplugging"
Hotunplug attempts will still fail with:
"Error: Bus 'pcie.0' does not support hotplugging"
Reported-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
---
hw/i386/pc.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index 803bd52ca4..2dfd69b973 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -1643,13 +1643,13 @@ static void pc_virtio_pmem_pci_pre_plug(HotplugHandler *hotplug_dev,
HotplugHandler *hotplug_dev2 = qdev_get_bus_hotplug_handler(dev);
Error *local_err = NULL;
- if (!hotplug_dev2) {
+ if (!hotplug_dev2 && dev->hotplugged) {
/*
* Without a bus hotplug handler, we cannot control the plug/unplug
- * order. This should never be the case on x86, however better add
- * a safety net.
+ * order. We should never reach this point when hotplugging on x86,
+ * however, better add a safety net.
*/
- error_setg(errp, "virtio-pmem-pci not supported on this bus.");
+ error_setg(errp, "virtio-pmem-pci hotplug not supported on this bus.");
return;
}
/*
@@ -1658,7 +1658,7 @@ static void pc_virtio_pmem_pci_pre_plug(HotplugHandler *hotplug_dev,
*/
memory_device_pre_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev), NULL,
&local_err);
- if (!local_err) {
+ if (!local_err && hotplug_dev2) {
hotplug_handler_pre_plug(hotplug_dev2, dev, &local_err);
}
error_propagate(errp, local_err);
@@ -1676,9 +1676,11 @@ static void pc_virtio_pmem_pci_plug(HotplugHandler *hotplug_dev,
* device bits.
*/
memory_device_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev));
- hotplug_handler_plug(hotplug_dev2, dev, &local_err);
- if (local_err) {
- memory_device_unplug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev));
+ if (hotplug_dev2) {
+ hotplug_handler_plug(hotplug_dev2, dev, &local_err);
+ if (local_err) {
+ memory_device_unplug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev));
+ }
}
error_propagate(errp, local_err);
}
--
2.26.2
next prev parent reply other threads:[~2020-06-26 7:23 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-26 7:22 [PATCH v5 00/21] virtio-mem: Paravirtualized memory hot(un)plug David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand [this message]
2020-06-26 7:22 ` [PATCH v5 01/21] pc: Support coldplugging of virtio-pmem-pci devices on all buses David Hildenbrand
2020-06-26 7:22 ` [PATCH v5 02/21] exec: Introduce ram_block_discard_(disable|require)() David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-06-26 7:22 ` [PATCH v5 03/21] vfio: Convert to ram_block_discard_disable() David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-06-26 7:22 ` [PATCH v5 04/21] accel/kvm: " David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-06-26 7:22 ` [PATCH v5 05/21] s390x/pv: " David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-06-26 7:22 ` [PATCH v5 06/21] virtio-balloon: Rip out qemu_balloon_inhibit() David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-06-26 7:22 ` [PATCH v5 07/21] target/i386: sev: Use ram_block_discard_disable() David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-06-26 7:22 ` [PATCH v5 08/21] migration/rdma: " David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-06-26 7:22 ` [PATCH v5 09/21] migration/colo: " David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-06-26 7:22 ` [PATCH v5 10/21] virtio-mem: Paravirtualized memory hot(un)plug David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-06-30 10:06 ` Michael S. Tsirkin
2020-06-30 10:06 ` Michael S. Tsirkin
2020-06-30 10:21 ` David Hildenbrand
2020-06-30 10:21 ` David Hildenbrand
2020-06-26 7:22 ` [PATCH v5 11/21] virtio-pci: Proxy for virtio-mem David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-07-06 15:28 ` Cornelia Huck
2020-07-06 15:28 ` Cornelia Huck
2020-07-06 16:39 ` David Hildenbrand
2020-07-06 16:39 ` David Hildenbrand
2020-06-26 7:22 ` [PATCH v5 12/21] MAINTAINERS: Add myself as virtio-mem maintainer David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-06-26 7:22 ` [PATCH v5 13/21] hmp: Handle virtio-mem when printing memory device info David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-06-26 7:22 ` [PATCH v5 14/21] numa: Handle virtio-mem in NUMA stats David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-06-26 7:22 ` [PATCH v5 15/21] pc: Support for virtio-mem-pci David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-06-26 7:22 ` [PATCH v5 16/21] virtio-mem: Allow notifiers for size changes David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-06-26 7:22 ` [PATCH v5 17/21] virtio-pci: Send qapi events when the virtio-mem " David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-06-26 7:22 ` [PATCH v5 18/21] virtio-mem: Migration sanity checks David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-06-26 7:22 ` [PATCH v5 19/21] virtio-mem: Add trace events David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-07-02 19:08 ` Dr. David Alan Gilbert
2020-07-02 19:08 ` Dr. David Alan Gilbert
2020-06-26 7:22 ` [PATCH v5 20/21] virtio-mem: Exclude unplugged memory during migration David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-06-26 7:22 ` [PATCH v5 21/21] numa: Auto-enable NUMA when any memory devices are possible David Hildenbrand
2020-06-26 7:22 ` David Hildenbrand
2020-07-03 10:40 ` [PATCH v1] virtio-mem: fix cross-compilation due to VIRTIO_MEM_USABLE_EXTENT David Hildenbrand
2020-07-03 10:40 ` David Hildenbrand
2020-07-03 11:57 ` Michael S. Tsirkin
2020-07-03 11:57 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200626072248.78761-2-david@redhat.com \
--to=david@redhat.com \
--cc=dgilbert@redhat.com \
--cc=ehabkost@redhat.com \
--cc=imammedo@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=marcel.apfelbaum@gmail.com \
--cc=mst@redhat.com \
--cc=pankaj.gupta.linux@gmail.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-s390x@nongnu.org \
--cc=rth@twiddle.net \
--cc=vgoyal@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.